TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '69d3777e661a8d49f3c0f84e031e4377e7fe2e60b2e94ede192cf9807c69511c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '69d3777e661a8d49f3c0f84e031e4377e7fe2e60b2e94ede192cf9807c69511c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 6 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 96 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 7 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 97 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 8 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 98 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT
THIS SHEET IS DELETED 2993439 FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 9 OF 12) Original Issue: November 16, 2023 Revision 1 May 28, 2026 Export Controlled ECCN: 9E991 757-29A0071 RB See page 1 for details 99 of 286
FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 10 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 100 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 11 OF 12) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 101 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT GD5486S
FEEDTHRU
ROTATED TO:
D43412J POS 9 AD0880 (AD880)
BRACKET W4236 STA 900 RIGHT BODY FAIRING STA 2993442 860 FIGURE 22: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 - WIRE
ROUTING (SHEET 12 OF 12) Original Issue: November 16, 2023 Revision 1 May 28, 2026 Export Controlled ECCN: 9E991 757-29A0071 RB See page 1 for details 102 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT _ This Figure applies only to: Group 4, Configuration 1.
W4236 AD0880 (AD880) -10 AP0033 (P33) PRESSURE SEAL 2 LOCATIONS 2 LOCATIONS 2 LOCATIONS 1 2519R-10 W1230 W2514 2519B-10 2 LOCATIONS D43312P POS 11 QI: GD5486-ST D43412J POS 09
• FIND NUMBER • ADDED WIRE OR NEW ROUTING 2992174 REFERENCE: 757 WDM 29-22-11 The find numbers (No.) shown below agree with the find number symbol in the figure.
Find No. Name Identification Qty More Data 1 CONTACT, SOCKET P-204541 4 (a) CONNECTOR, RECEPT BACC63BV18F8S7 1 (a) BACKSHELL BACC10KD18 1 (b) SLEEVE, OVERBRAID 280N3381-10301 1 (c) 5 TERMINAL, LUG BACT12AC12 1 (d) (e) (f) (g) WASHER BACW10BР3АPU 1 (f)(t) NUT BACN10JC3CM 1 (f)(t) 6 PLUG, END SEAL MS27488-12-2 6 (a) 7 ID - EQUIPMENT 280N3381-10501 1 (h) 8 ID - WIRE 280N3381-10303 12 (i) 9 ID - BUNDLE 280N3381-10304 2 10 INSULATION SLEEVING, 829A9003-384 2 (k)(1)
HEAT SHRINKABLE, YEL- LOW, IN DIA 3/8", CLASS FIGURE 23: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 -
INSTALLATION (SHEET 1 OF 3) Original Issue: November 16, 2023 Revision 1 May 28, 2026 Export Controlled ECCN: 9E991 757-29A0071 RB See page 1 for details 103 of 286
More DataQtyIdentificationName Find No.
(l)(m)2829A9003-124INSULATION SLEEVING,
HEAT SHRINKABLE, YEL- LOW, IN DIA .5 INCH CLASS 1 11
(l)(n)1280N3381-10305SLEEVE, EXPANDABLE12
(d)(e)(f)1BACT12AC56TERMINAL, LUG13
(o)1280N3381-12502ID - GROUND14
(p)-280N3381-105WWIRE - RAW MATERIAL15
(q)-280N3381-1001LACING TAPE - BLUE - PRESSURIZED (TEMP 135 DEG)
(r)(s)-BACS38K1STRAP
(r)(s)-BACS38K4STRAP
(r)(s)-BACS38K5STRAP
(a) Refer to SWPM 20-61-11 as an accepted procedure.
(b) Refer to SWPM 20-60-09 as an accepted procedure.
(c) Install between the pressure seal and the electrical connector. Refer to SWPM 20-25-11 as an accepted procedure.
(d) Refer to SWPM 20-30-11 as an accepted procedure.
(e) Refer to SWPM 20-20-00 as an accepted procedure.
(f) Refer to SWPM 20-20-10, Category 6 as an accepted procedure.
(g) Identify ground stud as GD5486S. Refer to SOPM 20-50-10, Part Mark M (Code M), as an accepted procedure.
(h) Install within 6 inches of equipment.
(i) Install within 4 inches of equipment and at 72 inches +/- 1 inch spaces between ID tapes.
(j) Install over sleeve, overbraid within 12 inches of the electrical connector and pressure seal.
(k) Install over ends of sleeve, expandable.
(l) Refer to SWPM 20-10-14 as an accepted procedure.
(m) Install over ends of sleeve, overbraid.
(n) Install under the sleeve, overbraid.
(o) Install within 4 inches of ground.
(p) Refer to SWPM 20-10-11 as an accepted procedure.
(q) Refer to SWPM 20-10-11 and SWPM 20-10-19 as accepted procedures.
FIGURE 23: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 -
INSTALLATION (SHEET 2 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 104 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
More DataQtyIdentificationName Find No.
(r) Select the strap size to fit the wire bundle and install at 6 - 8 inch spacing intervals. Refer to SWPM 20- 10-11 as an accepted procedure.
(s) Only install in pressurized areas.
(t) If the part size does not fit, use WASHER BACW10BP( )APU and NUT BACN10JC( )CM as required.
WIRE LIST - CUT AND CODE AS REQUIRED
NOTESMATERIAL SPECIFICATIONLENGTH (INCHES) TYPE CODE GAGE COLOR WIRE NUMBER WIRE BUNDLE -BMS13-48T10C02G010821PB102519BW4236 -PB102519RW4236 FIGURE 23: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0880 - WIRE BUNDLE W4236 -
INSTALLATION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 105 of 286 REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT
REQUIREMENTS BULLETIN 757-29A0071
ALERT ALERT _ This Figure applies only to: Group 4, Configuration 1.
STA 870 W4236 45G W4236 AD0880 (AD880)
DISCONNECT -
BRACKET STA D43412J 900 POS 9 4 LOCATIONS (1
RIGHT BODY FAIRING STA 860 W4236
• 4 LOCATIONS 2993682 FIGURE 24: DISCONNECT BRACKET AD0880 - ELECTRICAL CONNECTOR D43412J AND WIRE BUNDLE
CLAMP - INSTALLATION (SHEET 1 OF 2) Original Issue: November 16, 2023 Revision 1 May 28, 2026 Export Controlled ECCN: 9E991 757-29A0071 RB See page 1 for details 106 of 286
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)4BACS12HN04-8SCREWInstall (New)1
(a)4NAS1149DN416JWASHERInstall (New)
(a)4BACN10YR04CDNUTInstall (New)2
(b)1BACC10GU102CLAMP, LOOPInstall (New)3
(b)1NAS1149D0332JWASHERInstall (New)4
(b)1BACS12GU3K8SCREWInstall (New)5
(b)1BACN10YR3CDNUTInstall (New)6
(a) Refer to SWPM 20-60-06 as an accepted procedure.
(b) Refer to SWPM 20-10-12 as an accepted procedure.
FIGURE 24: DISCONNECT BRACKET AD0880 - ELECTRICAL CONNECTOR D43412J AND WIRE BUNDLE
CLAMP - INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: November 16, 2023 757-29A0071 RBRevision 1 May 28, 2026 107 of 286 REQUIREMENTS BULLETIN 757-29A0071