TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2b35d1a27c7ac998c1817fa0ca10132db4fd252af41f3b473fb570f5af0d5cfa' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2b35d1a27c7ac998c1817fa0ca10132db4fd252af41f3b473fb570f5af0d5cfa' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
REQUIREMENTS BULLETIN 777-33-0069
VIEW LOOKING INBOARD (TYPICAL) FWD
VIEW LOOKING OUTBOARD (TYPICAL) 3047779 FIGURE 7: PASSENGER COMPARTMENT - SIDEWALL LIGHT CLIP AND RINGPOST AT STA 478 -
INSTALLATION (SHEET 2 OF 3) Original Issue: October 15, 2024 Export Controlled ECCN: 9E991 777-33-0069 RB See page 1 for details 35 of 36
REQUIREMENTS BULLETIN 777-33-0069 36 of 36 See page 1 for details
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each airplane.
Step Task Name Identification Qty More Data 1 Apply ADHESIVE BMS5-105, TYPE II, CLASS 3
- (a) 2 Install (New) CLIP, BONDABLE DET 421W3351-1 1 - 3 Install (New) RINGPOST, WIRE HARNESS
MOUNTING SUPPORT BACS31H1A 1 (b) Install (New) SCREW BACS12GU3K29 1 (c) Install (New) NUT BACN10JC3CD 1 (c) 4 Route POWER CONNECTOR WIRE BUNDLE
- 1 (d) Install (New) STRAP BACS38W3 1 (b)(e)
(a) Apply to mating surfaces of clip and panel. Refer to SOPM 20-50-12 as an accepted procedure.
(b) Refer to SWPM 20-10-12 as an accepted procedure.
(c) Refer to SOPM 20-50-01 as an accepted procedure.
(d) Refer to SWPM 20-10-11 as an accepted procedure.
(e) Use to tie power connector wire bundle to ringpost.
FIGURE 7: PASSENGER COMPARTMENT - SIDEWALL LIGHT CLIP AND RINGPOST AT STA 478 -
INSTALLATION (SHEET 3 OF 3) Original Issue: October 15, 2024
Export Controlled ECCN: 9E991
777-33-0069 RB