Copy · SB-777-52A0050-01--[1] · 36 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0053; AD 2014-25-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5da1376968e95f77e0c179679cc220cf53eea141e87d968b551fdf55ec1fe519'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 777 Service Bulletin Number: 777-52A0050 Original Issue: June 18, 2013 Revision 1: August 07, 2014 ATA System: 5211 SUBJECT: DOORS - Passenger Entry Doors - Girt Bar Floor Fitting - Spring Pin Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2013 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 1 of 36

2.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 2 of 36 BOEING SERVICE BULLETIN 777-52A0050

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 6 B. Concurrent Requirements ...................................... 1 6 C. Reason ................................................ 1 7 D. Description .............................................. 1 7 E. Compliance .............................................. 1 8 F. Approval ............................................... 1 8 G. Manpower .............................................. 1 9 H. Weight and Balance Changes .................................... 1 9 I. Electrical Load Data ......................................... 2 0 J. References .............................................. 2 0

1. Existing Data: ......................................... 2 0

2. Data Supplied with this Service Bulletin: ........................... 2 0

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 0 K. Publications Affected ........................................ 2 0 L. Interchangeability and Intermixability of Parts ........................... 2 1 M. Software Accomplishment Summary ................................ 2 1

2. MATERIAL INFORMATION ........................................ 2 3 A. Material - Price and Availability ................................... 2 3 B. Industry Support Information .................................... 2 3 C. Parts Necessary for Each Airplane ................................. 2 3

1. Kits/Parts ............................................ 2 3

2. Parts and Materials Supplied by the Operator ........................ 2 4

3. Parts Modified and Reidentified ................................ 2 4

4. Parts Removed and Not Replaced .............................. 2 4 D. Parts Necessary to Change Spares ................................. 2 4 E. Special Tooling - Price and Availability ............................... 2 5 F. Special Tooling Necessary to do this Service Bulletin ....................... 2 5

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7 A. GENERAL INFORMATION ..................................... 2 7 B. WORK INSTRUCTIONS ....................................... 2 8 FIGURE 1: PASSENGER ENTRY DOOR - GIRT BAR FLOOR FITTING - SPRING PIN REPLACEMENT [Group 1] ............................................ 2 9 FIGURE 2: PASSENGER ENTRY DOOR - GIRT BAR FLOOR FITTING - SPRING PIN REPLACEMENT [Group 2] ............................................ 3 2 FIGURE 3: GIRT BAR FLOOR FITTING - SPRING PIN REPLACEMENT ................ 3 5 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 3 of 36 BOEING SERVICE BULLETIN 777-52A0050

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 4 of 36 BOEING SERVICE BULLETIN 777-52A0050

BLANK PAGE

Commercial Airplanes 777 Service Bulletin Revision Transmittal SheetNumber: 777-52A0050Original Issue: June 18, 2013 Revision 1: August 07, 2014 ATA System: 5211 SUBJECT: DOORS - Passenger Entry Doors - Girt Bar Floor Fitting - Spring Pin Replacement This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on the airplane(s) changed in accordance with the original issue of this service bulletin.

REASON FOR REVISION This revision is sent to add instructions to modify parts found in spares, add instruction to identify modified parts and to add an Aircraft Maintenance Manual reference.

These sections were changed:

1. Action and Description - Instructions for new component work is added.

2. Summary Manpower - Manpower times are updated.

3. Paragraph, 1.C., Reason - Reason for Revision 1 was added.

4. Paragraph 1.E., Compliance - Compliance action is updated.

5. Paragraph, 1.G., Manpower - Estimates were changed.

6. Paragraph, 1.J., References - Added new references.

7. Paragraph, 1.K., Publications affected - Added new publications.

8. Paragraph, 2.B. Industry Support Information - Boeing warranty statement is updated.

9. Paragraph, 3.B., Work Instructions - Instructions added to modify components and an AMM reference is added.

10. Figures 1 and 2 - Part mark instructions added.

11. New Figure 3 was added.

The data given in Information Notice 777-52A0050 IN 01 is included in this revision. IN01 was sent to include an additional AMM reference in Paragraph 3.B.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 5 of 36

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY June 18, 2013Original Issue:

August 07, 2014Revision 1:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 6 of 36 BOEING SERVICE BULLETIN 777-52A0050

Commercial Airplanes 777 Service Bulletin SummaryNumber: 777-52A0050Original Issue: June 18, 2013 Revision 1: August 07, 2014 ATA System: 5211 SUBJECT: DOORS - Passenger Entry Doors - Girt Bar Floor Fitting - Spring Pin Replacement

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to replace the existing girt bar floor fitting spring pins at the passenger entry doors with new spring pins that have improved resistance to stress corrosion cracking. If the work given in this service bulletin is not done, the existing girt bar floor fitting spring pins could develop stress corrosion cracks and eventually migrate or break. Broken or migrated girt bar floor fitting spring pins could prevent one or more passenger entry door escape slides from deploying properly during an emergency. If escape slides do not deploy properly during an emergency, delayed evacuation and serious injury to cabin occupants could occur.

Four operators have reported a total of 23 corroded, migrated, or broken girt bar floor fitting spring pins on nine different airplanes. One of the operators reported that a broken girt bar floor fitting spring pin prevented a door escape slide from deploying during a maintenance test.

Boeing has completed analysis on three broken spring pins and has determined that the spring pins failed due to stress corrosion cracking.

Accomplishment of this service bulletin will ensure that the girt bar floor fitting spring pins are free of stress corrosion cracking that could prevent proper escape slide deployment during an emergency. The new spring pin material has demonstrated sufficient service life when used in similar applications on other Boeing model airplanes.

Boeing Fleet Team Digest (FTD) article 777 FTD 52-12002 is related to this service bulletin.

Boeing Service Related Problem (SRP) 777-SRP-52-0102 is related to this service bulletin.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedYesSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 7 of 36

ReferenceAffectedPlanning Data Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator NoOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION (PRR 62777-90S) PART 1: AIRPLANE WORK At each of the passenger entry doors on the airplane, remove the girt bar floor fitting spring pins. Install new girt bar floor fitting spring pins that have improved resistance to stress corrosion cracking. Accomplish all actions in accordance with Paragraph 1.E., Compliance.

PART 2: COMPONENT WORK Remove the girt bar floor fitting spring pins. Install new girt bar floor fitting spring pins that have improved resistant to stress corrosion cracking.

EFFECTIVITY 777-200, 777-200LR, 777-300, 777-300ER, and 777F airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Refer to Paragraph 1.E., Compliance.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of March 14, 2012. Please refer to Paragraph

2.B., Industry Support Information. The warranty remedies will expire eight years from the original issue date of this service bulletin.

MANPOWER Elapsed HoursTotal Task HoursAirplanes

14.0014.00Group 1 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 8 of 36 BOEING SERVICE BULLETIN 777-52A0050

Elapsed HoursTotal Task HoursAirplanes

3.53.5Group 2

MATERIAL INFORMATION Boeing Supplied Kits/Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 9 of 36 BOEING SERVICE BULLETIN 777-52A0050

Page 10OCROpen in PDF

BOEING SERVICE BULLETIN 777-52A0050

AT EACH PASSENGER ENTRY DOOR

ON THE AIRPLANE, REPLACE THE

SPRING PINS IN THE GIRT BAR FLOOR

FITTINGS WITH NEW PINS THAT HAVE

IMPROVED RESISTANCE TO STRESS CORROSION CRACKING.

GIRT BAR FLOOR

FITTINGS SPRING~ PAWL

PASSENGER ENTRY DOOR FWD DOOR 1 LEFT SHOWN,

ALL OTHER PASSENGER ENTRY

DOORS SIMILAR SPRING PIN 2238968

GIRT BAR

FLOOR FITTING Original Issue: June 18, 2013 Revision 1: August 07, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING 777-52A0050 Work - See page 1 for details. 10 of 36

Commercial Airplanes 777 Service Bulletin Number: 777-52A0050 Original Issue: June 18, 2013 Revision 1: August 07, 2014 ATA System: 5211 SUBJECT: DOORS - Passenger Entry Doors - Girt Bar Floor Fitting - Spring Pin Replacement

1. PLANNING INFORMATION A. Effectivity

1. Airplanes Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

This service bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER and 777F airplanes, line numbers 1 through 1134, in 2 Groups. The Variable Numbers and Group Information for the applicable airplanes is given below. An equivalent change is on subsequent production airplanes.

Refer to PRR PRR 62777-90S for data about this change.

DESCRIPTIONCONFIGURATIONGROUP 777-200, 777-200LR, 777-300, and 777-300ER airplanes, line numbers 1 through 1134.

-1 777F airplanes, line numbers 1 through 1134.-2 Airplane Models:

777-200, 777-200LR, 777-300, 777-300ER, 777F GroupVariable Number 1WA001 - WA017 1WA076 - WA080 1WA086 - WA093 1WA101 - WA104 1WA116 - WA119 1WA131 - WA137 1WA171 - WA175 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 11 of 36

GroupVariable Number 1WA196 - WA198 1WA206 - WA212 1WA221 - WA223 1WA231 - WA232 1WA241 - WA250 1WA261 - WA266 1WA281 - WA283 1WA301 - WA304 1WB001 - WB021 1WB031 - WB046 1WB051 - WB088 1WB101 - WB106 1WB121 - WB125 1WB131 - WB148 1WB151 - WB155 1WB161 - WB177 1WB181 - WB194 1WB201 - WB215 1WB231 - WB247 1WB271 - WB273 1WB276 - WB286 1WB291 - WB302 1WB306 - WB307 1WB311 - WB337 1WB341 - WB342 1WB366 - WB368 1WB371 - WB388 1WB406 1WB411 - WB413 1WB416 - WB439 1WB446 - WB453 1WB476 1WB481 - WB484 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 18, 2013 777-52A0050Revision 1: August 07, 2014 12 of 36 BOEING SERVICE BULLETIN 777-52A0050

Pages 13–24 of 36