Copy · U.S. DOT/FAA - Service Bulletin 707-00A3183-06 · 106 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0756; AD 2015-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b44fc7db2675659669f7dab444875abef80d93cad0a92162e6c609d9917027e9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 85–96

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each nacelle strut.

More DataQtyIdentificationNameTaskStep

(a)2-HoleDrill / Ream1

(b)2BACB30MB12-10BoltInstall (New)2 -2BACC30BH12CollarInstall (New)

(a) Oversize the holes to 0.371 - 0.375 inch diameter to remove fatigued metal in accordance with 707- 100/200 SRM 51-2-5 or 707-300/400 SRM 51-2-5.

(b) Install the fasteners common to the outboard side of the overwing support fitting and the wing front spar upper chord.

FIGURE 13: NACELLE STRUT # 1, # 2, # 3 AND # 4 OUTBOARD SIDE OVERWING FASTENER

INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 97 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

The parts shown below are changed by this service bulletin. The Quantity is the number of parts changed on each airplane. Components or sub-assembly parts are indented. The Quantity of the indented part is the number of parts used on the next higher assembly.

RCPNCNew Part NumberQuantityNameRUCExisting Part Number CR, S50-8227-1 thru -10, -13 thru -20, -23 thru -28, -31 , -32, -3001, -3002, -3007 thru -3010 1 eachStrut Assembly - Equipped RWK50-8227-1 thru -10, -13 thru -20, -23 thru -28, -31 , -32, -3001, -3002, -3007 thru -3010 CR, S65-2510-1, -2, -3001 thru -3016, -3019 thru -3030, -3033, -3034, -3037 thru -3042, -3049 thru -3056, -3059 thru -3110 1 eachStrut Assembly - Equipped RWK65-2510-1, -2, -3001 thru -3016, -3019 thru -3030, -3033, -3034, -3037 thru -3042, -3049 thru -3056, -3059 thru -3110 CR, S.5-85617-3000 thru - 3002, -3008, -3009, - 3011, -3014 1 eachStrut Assembly - Structure RWK.5-85617-3000 thru - 3002, -3008, -3009, - 3011, -3014 CR, S65-2516, -11 eachStrut Assembly - Structure RWK.65-2516, -1 CR, S65-2516-3000, -3026, - 3027, -3030 1 eachStrut Assembly - Structure RWK.65-2516-3000, -3026, - 3027, -3030 CS65-2536-15 or -251Midspar FittingDIS..5-85658-3001 CS65-2536-16 or -261Midspar FittingDIS..5-85658-3002 CS65-2536-15 or -251Midspar FittingDIS..5-85658-3017 CS65-2536-16 or -261Midspar FittingDIS..5-85658-3018 CS65-2536-15 or -251Midspar FittingDIS.. 65-2536-1 CS65-2536-16 or -261Midspar FittingDIS.. 65-2536-2 CS65-2536-15 or -251Midspar FittingDIS.. 65-2536-4 CS65-2536-16 or -261Midspar FittingDIS.. 65-2536-5 CS65-2536-19 or -271Midspar FittingDIS.. 65-2536-7 CS65-2536-20 or -281Midspar FittingDIS.. 65-2536-8 CS65-2536-15 or -251Midspar Fitting Assembly DIS.. 65-2536-9 CS65-2536-16 or -261Midspar Fitting Assembly DIS.. 65-2536-10 AS65-27303-321 eachBushing - Standard Size DIS... 65-27303-27, -28, -29 CS65-27303-321 eachBushing - Undersize I.D.

DIS... 65-99744-427, -428, - 429 APPENDIX A: EXISTING PARTS ACCOUNTABILITY (SHEET 1 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 98 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

RCPNCNew Part NumberQuantityNameRUCExisting Part Number CS66-1044-68Lug Shim - 0.001DIS66-1044 CS66-1044-74Lug Shim - 0.003DIS66-1044-1 CS66-1044-84Lug Shim - 0.006DIS66-1044-2 CS66-1044-94Lug Shim - 0.010DIS66-1044-3 CS66-1044-104Lug Shim - 0.016DIS66-1044-4 CS66-1044-114Lug Shim - 0.025DIS66-1044-5 RCPNCNew Part NumberQuantityNameRUCExisting Part Number CR, S50-8228-1 thru -12, -15 thru -32, -3001, -3002, - 3007 thru -3014 1 eachStrut Assembly - Equipped RWK50-8228-1 thru -12, -15 thru -32, -3001, -3002, - 3007 thru -3014 CR, S65-2488-1, -2, -3001 thru -3016, -3019 thru -3030, -3033 thru -3042, -3049 thru 3128, -501, -502 1 eachStrut Assembly - Equipped RWK65-2488-1, -2, -3001 thru -3016, -3019 thru -3030, -3033 thru -3042, -3049 thru 3128, -501, -502 CR, S5-85627-3000, -3002, - 3003, -3009, -3010, - 3012, -3013, -3014, - 3015, 1 eachStrut Assembly - Structure RWK5-85627-3000, -3002, - 3003, -3009, -3010, - 3012, -3013, -3014, - 3015, CR, S65-2494, -1, -30161 eachStrut Assembly - Structure RWK65-2494, -1, -3016 CR, S65-2494-3000, -3015, - 3019, -501 1 eachStrut Assembly - Structure RWK65-2494-3000, -3015, - 3019, -501 CS65-02534-211Midspar FittingDIS5-84467-3001 CS65-02534-221Midspar FittingDIS5-84467-3002 CS65-02534-211Midspar FittingDIS5-84467-3003 CS65-02534-221Midspar FittingDIS5-84467-3004 CS65-02534-211Midspar FittingDIS65-02534-1 CS65-02534-221Midspar FittingDIS65-02534-2 CS65-02534-211Midspar FittingDIS65-02534-4 CS65-02534-221Midspar FittingDIS65-02534-5 CS65-02534-191Midspar FittingDIS65-02534-7 CS65-02534-201Midspar FittingDIS65-02534-8 CS65-02534-211Midspar Fitting Assembly DIS65-02534-9 APPENDIX A: EXISTING PARTS ACCOUNTABILITY (SHEET 2 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 99 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 100Open in PDF

RCPNCNew Part NumberQuantityNameRUCExisting Part Number CS65-02534-221Midspar Fitting Assembly DIS65-02534-10 AS65-27303-331 eachBushing - Standard Size DIS65-27303-26 CS66-1051-68Lug Shim - 0.001DIS66-1051 CS66-1051-74Lug Shim - 0.003DIS66-1051-1 CS66-1051-84Lug Shim - 0.006DIS66-1051-2 CS66-1051-94Lug Shim - 0.010DIS66-1051-3 CS66-1051-104Lug Shim - 0.016DIS66-1051-4 CS66-1051-114Lug Shim - 0.025DIS66-1051-5 Recommended Use CodeRUC Discard the part.DIS Make the change as specified in this service bulletin.RWK Part Number CodePNC This is the part number after the change.R This is the new equivalent or replacement part number.S Replacement CodeRC Replacement not permitted. Do not replace a new part with an existing part.A Replacement permitted. However, if the existing part is used, it will cancel the effect of the change specified in this service bulletin C APPENDIX A: EXISTING PARTS ACCOUNTABILITY (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 100 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 101OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NAC STA

260.64 125 MACHINE FINISH IN REWORK AREAS BREAK ALL SHARP EDGES 0.02 0.03

0.44

0.42 NAC WL A 15.0° 0.32

143.25 -50-8733-1 50-8733-5 50-8733-7 50-8733-9 R1.96 1.98 0.42 (2 LOCATIONS) VIEW A-A

0.40 (2 LOCATIONS) DETAIL 1

NAC STA

260.64

15.0° NAC WL → 0.25

143.25 • 50-8733-11 50-8733-13 50-8733-15 50-8733-17

VIEW B-B (2 LOCATIONS) DETAIL 2

NAC STA

260.64 NAC WL 15.0° - 0.20

143.25 50-8733-19 $ 1.64 1.66 RO.50 TRUE (2 LOCATIONS) VIEW C-C 2173705 (TYPICAL) (2 LOCATIONS) DETAIL 3 APPENDIX B: NACELLE STRUT # 1 AND # 4 - DRAG FITTING - CHAMFER / RADIUS INSPECTION (SHEET 1 OF 2) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details. 101 of 106

Page 102OCROpen in PDF

BOEING SERVICE BULLETIN А3183

ALERT ALERT

NAC STA

0.67 260.64 125 MACHINE FINISH IN REWORK AREAS

0.65 0.45 0.4/ BREAK ALL SHARP EDGES 0.03

0.36 0.02

0.34 NAC WL -143.25 15.0° 0.38 50-8732-1 R 2.13 50-8732-5 50-8732-7 (2 LOCATIONS) • 0.51 50-8732-9 VIEW D-D

0.49 (2 LOCATIONS) RO.50 TRUE DETAIL 4 (TYPICAL)

NAC STA

260.64

0.69 0.47

0.67 0.45 NAC WL

143.25 15.0° 0.16 -50-8732-11 50-8732-13 R 2.35 , 2.37 (2 LOCATIONS) VIEW E-E (2 LOCATIONS) DETAIL 5

NAC STA

260.64

0.21

0.19 NAC WL

143.25 15.0° - 0.25 -50-8732-15 R 1.39 1.41 RO.50 TRUE (2 LOCATIONS) VIEW F-F 2173706 (2 LOCATIONS) (TYPICAL) DETAIL 6 APPENDIX B: NACELLE STRUT # 1 AND # 4 - DRAG FITTING - CHAMFER / RADIUS INSPECTION (SHEET 2 OF 2) Original Issue: June 27, 1975 Revision 6 February 07, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3183 Work - See page 1 for details. 102 of 106

Page 103OCROpen in PDF

BOEING SERVICE BULLETIN A3183

ALERT ALERT

CHAMFER BOTH ENDS I.D. 0.005-0.015 X 45048° O.D. 0.005-0.015 x 45048° 42° (EXCEPT AS NOTED) O.D. 0.030-0.035 x 12°12° 11° FOR -1,-2,-3,-4,-13, -14,-15,-16 ONLY *A"DIA. (O.D.)

(SEE TABLE) "B"DIA. (I.D.) DIM "C" (SEE TABLE) (SEE TABLE) 125 / ALL SURFACES BREAK ALL SHARP CORNERS.

ALL DIAMETERS TO BE CONCENTRIC WITHIN

0.003 TOLERANCE IN RADIUS (T.I.R).

Inboard Strut - Drag Fitting - Straight Bushing - Non Plated Part Number Drag Fitting Hole Diameter B C 69-2860-1 1.3125 - 1.3126 1.3145 1.3145 1.186 1.160 0.77 0.77

(a) 1.3165 1.189 0.78 69-2860-2 1.3125 - 1.3126 1.3145 1.3145 1.186 1.160 0.79 0.79

(a) 1.3165 1.189 0.80

(a) This part is required with Top Kit 65C13873-2.

APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES (SHEET 1 OF 4) Original Issue: June 27, 1975 Revision 6 February 07, 2014 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3183 Work - See page 1 for details. 103 of 106

Page 104Open in PDF

Inboard Strut - Drag Fitting - Straight Bushing - Part Number - Plated (a) CBA (After Plate)A (Before Plate)Drag Fitting Hole Diameter Part Number

0.79

0.80

0.791.192

1.221

1.2181.3461

1.3470

1.34611.3457

1.3462

1.34571.3445 - 1.344669-2860-50

(b)

0.92

0.93

0.921.192

1.221

1.2181.3461

1.3470

1.34611.3457

1.3462

1.34571.3445 - 1.344669-2860-51

(b)

0.97

0.98

0.971.192

1.221

1.2181.3461

1.3470

1.34611.3457

1.3462

1.34571.3445 - 1.344669-2860-59

(b)

(a) Cadmium plate in accordance with AMS-QQ-P-416, Type 1, Class 2. Plating optional on ID.

(b) This part is required with Top Kit 65C13873-1.

Outboard Strut - Drag Fitting - Straight Bushing - Non Plated CBADrag Fitting Hole DiameterPart Number

0.80

0.81

0.801.090

1.127

1.1241.2520

1.2540

1.25201.2500 - 1.251069-2860-3

(a)

0.79

0.80

0.791.090

1.127

1.1241.2520

1.2540

1.25201.2500 - 1.251069-2860-4

(a)

(a) This part is required with Top Kit 65C13839-2.

Outboard Strut - Drag Fitting - Straight Bushing - Plated (a) CBA (After Plate)A (Before Plate)Drag Fitting Hole Diameter Part Number

0.80

0.81

0.801.122

1.159

1.1561.2836

1.2845

1.28361.2832

1.2837

1.28321.2820 - 1.283069-2860-52

(b)

0.92

0.93

0.921.122

1.159

1.1561.2836

1.2845

1.28361.2832

1.2837

1.28321.2820 - 1.283069-2860-53

(b)

(a) Cadmium plate in accordance with AMS-QQ-P-416, Type 1, Class 2. Plating optional on ID.

(b) This part is required with Top Kit 65C13839-1.

APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES (SHEET 2 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 104 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT

Page 105OCROpen in PDF

BOEING SERVICE BULLETIN A3183

ALERT ALERT R. 030 MAX CHAMFER I.D. 0.005-0.015 × 45° 42° 48° O.D. 0.005-0.015 × 45° 42° Ø "D" O.D.

SEE TABLE

2.22

2.20 2.20

• "E" I.D.

"G" SEE TABLE SEE TABLE • 0.0003 "F"

SEE TABLE

0.0005 A 125 / ALL SURFACES BREAK ALL SHARP CORNERS 0.03:0.0089 Outboard Strut - Drag Fitting - Flanged Bushing - Plated (a) Part Number Drag Fitting D (Before Plate) D (After Plate) E F G Hole Diameter +/- +0.010

0.005 -0.000 69-42475-5 1.2820 - 1.2830 1.2832 1.2832 1.2836 1.2836 1.156 1.122 0.855 0.09

(b) 1.2837 1.2845 1.159 69-42475-6 1.2820 - 1.2830 1.2832 1.2832 1.2836 1.2836 1.156 1.122 0.935 0.09

(b) 1.2837 1.2845 1.159 69-42475-9 1.2820 - 1.2830 1.3457 1.3457 1.3461 1.3461 1.218 1.192 0.905 0.09

(c) 1.3462 1.3470 1.221 APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES (SHEET 3 OF 4) Original Issue: June 27, 1975 Revision 6 February 07, 2014 Export Controlled ECCN: 9E991 - BOEING A3183 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 105 of 106

Page 106Open in PDF

Outboard Strut - Drag Fitting - Flanged Bushing - Plated (a) G +0.010 -0.000 F +/-

0.005 ED (After Plate)D (Before Plate)Drag Fitting Hole Diameter Part Number

0.090.9061.192

1.221

1.2181.3461

1.3470

1.34611.3457

1.3462

1.34571.2820 - 1.283069-42475-10

(c)

0.090.8351.192

1.221

1.2181.3461

1.3470

1.34611.3457

1.3462

1.34571.2820 - 1.283069-42475-15

(c)

0.060.8551.122

1.159

1.1561.2836

1.2845

1.28361.2832

1.2837

1.28321.2820 - 1.283069-42475-18

(b)

(a) Cadmium plate in accordance with AMS-QQ-P-416, Type 1, Class 2. Plating optional on ID.

(b) This part is required with Top Kit 65C13839-1.

(c) This part is required with Top Kit 65C13873-1.

APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES (SHEET 4 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 27, 1975 A3183Revision 6 February 07, 2014 106 of 106 BOEING SERVICE BULLETIN A3183

ALERTALERT