Copy · SB-707-00A3364-04-- · 57 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0504; AD 2018-19-32 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ceb89d08ee66a3f79d5e209c1980d4fed872b639f5f5ab2e8499efdd2438a893'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 25–36

Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( )New Part Number -12-11-10-9-8-7 QTY --Rivet8-----BACR15BB6D9 --Rivet9-----BACR15BB6D16 Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( )New Part Number -18-17-16-15-14-13 QTY --Bolt24----BACB30FM6-2 --Bolt66--3-BACB30FM6-5 --Bolt-8--8-BACB30FM6-6 --Bolt----4-BACB30FM8-5 --Bolt642432BACB30FM8-6 --Bolt----1-BACB30FM8-7 --Bolt10666-6BACB30FM8-8 --Bolt----6-BACB30FM8-9 --Bolt-6----BACB30FM8-12 --Bolt4-666-BACB30FM10-11 --Bolt-----6BACB30FM10-14 --Bolt-----2BACB30FM10-15 --Bolt414--4-BACB30FM14-10 --Bolt--10-10-BACB30FM14-11 --Bolt---106-BACB30FM14-12 --Bolt----8-BACB30FM14-13 --Bolt-----6BACB30FM16-15 --Bolt-----4BACB30FM16-18 --Bolt52----BACB30FN6-4 --Bolt8-88-4BACB30FN6-5 --Bolt----2-BACB30FN6-6 --Bolt-----6BACB30FN6-7 --Bolt84--7-BACB30MB6-8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 37 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( )New Part Number -18-17-16-15-14-13 QTY --Bolt6355-5BACB30MB6-9 --Collar1020881310BACC30M6 --Collar516810148BACC30M8 --Collar14-6668BACC30M10 --Collar-14101028-BACC30M14 --Collar-----10BACC30M16 --Collar-75575BACC30X6 --Rivet716----BACR15BA6D6 --Rivet14-16161616BACR15BA6D7 --Rivet421--24-BACR15BB6D5 --Rivet5-1212-10BACR15BB6D6 --Rivet--141416-BACR15BB6D8 --Rivet-84--12BACR15BB6D9 --Rivet--559-BACR15BB6D14 --Rivet-----5BACR15BB6D17 --Rivet-----2BACR15CE6D6 --Rivet-----2BACR15CE6D9 Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( )New Part Number -24-23-22-21-20-19 QTY --Washer-1----60-4849-9 --Washer1---1160-6961-4 --Washer--1---60-6961-6 --Bolt----1-65-23413-12 --Bolt1-----65-23413-13 --Bolt--1---65-23413-15 --Bolt-----165-23413-18 --Bolt-1----66-21024 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 38 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( )New Part Number -24-23-22-21-20-19 QTY --Washer---1--AN960PD1416 --Bolt---1--BACB30LJ14-69 --Nut-1---1BACN10JC12 --Nut1--11-BACN10JC14 --Nut--1---BACN10JC17 --Washer---1--BACW10BN14AC Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( )New Part Number -30-29-28-27-26-25 QTY --Washer-----160-6961-4 --Washer11-1--60-6961-6 --Bolt1-----65-23413-16 --Bolt-----165-23413-17 --Bolt---1--65-23413-20 --Bolt-1----65-23413-21 --Washer----1-AN960PD1216 --Washer--1---AN960PD1616 --Bolt----1-BACB30LJ12-70 --Bolt--1---BACB30LJ16-91 --Nut----11BACN10JC12 --Nut-111--BACN10JC16 --Nut1-----BACN10JC17 --Washer----1-BACW10BN12AC --Washer--1---BACW10BN16AC Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 39 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Kit 65-92050 - Continued NotesExisting Part Number Name65-92050-( ) New Part Number -32-31 QTY --Washer11AN960PD1416 --Bolt1-BACB30LJ14-89 --Bolt-1BACB30LJ14-92 --Nut11BACN10JC14 --Washer11BACW10BN14AC

2. Parts and Materials Supplied by the Operator The following parts or materials are necessary to do the change in this service bulletin. Parts and materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine operator part and material supply to make sure all necessary parts and materials are available.

NotesNameQTYPart Number / Specification

(a) (b)PRIMER8 ozBMS10-11, Type 1

(c) (d)CHEMICAL CONVERSION COAT- ING 8 ozTYPE 2, CLASS A

(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.

(b) Some types of primer contain Strontium Chromate and will not be available in the European Union (EU) after January 2019 without an authorization. EU operators are encouraged to make sure their suppliers are authorized to provide this material after January 2019 and that users of this material comply with the risk mitigation measures and operational conditions.

(c) Refer to SOPM 20-43-03 for material sources.

(d) Some types of Chemical Conversion Coating contain Chromium Trioxide Chromic Acid and will not be available in the European Union (EU) after September 2017 without an authorization. EU operators are encouraged to make sure their suppliers are authorized to provide this material after September 2017 and that users of this material comply with the risk mitigation measures and operational conditions.

3. Parts Modified and Reidentified None.

4. Parts Removed and Not Replaced None.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 40 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

D. Parts Necessary to Change Spares None.

E. Special Tooling - Price and Availability None.

F. Special Tooling Necessary to do this Service Bulletin No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 41 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 42 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

BLANK PAGE

3. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION NOTE: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,

METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.

1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for definition of the acronyms.

2. Obey all of the warnings and cautions given in the specified manual sections.

3. Unless shown differently, these dimensions and tolerances are used:

– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in Structural Repair Manual (SRM) Chapter 51 – Torque Values:

— Values for structural fasteners are given in 707/720 Structural Repair Manual, Chapter 51.

— Values for airframe maintenance tasks are included in Chapter 20 of 707/720 Aircraft Maintenance Manual (AMM).

— Non-standard torque values for maintenance tasks are included in the applicable installation step.

4. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.

5. If the length of any fastener specified in this service bulletin does not meet installation standards given in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards given in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this service bulletin.

6. A Detailed Inspection is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures may be required.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 43 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

7. These work instructions refer to procedures included in other Boeing documents.

When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

8. Boeing Service Letter 707-SL-51-029, Damage Reporting and Repair Plan/Design Guidelines, is an acceptable procedure to request information from Boeing for additional structural repair instructions. The Service Letter describes what information must be provided to Boeing before a structural repair can be provided.

9. The instructions in Paragraph 3.B., Work Instructions and the figures can include operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to use superseded tools.

10. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.

11. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.

12. Use of colors in Figures is based on guidance from the ATA e-Business Program (ATA) iSpec 2200.

13. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS are in Paragraph 1.E., Compliance.

B. WORK INSTRUCTIONS

1. Remove the inboard and outboard nacelle strut diagonal brace fairings. Refer to operator's standard procedure to obtain access to the diagonal brace tubes, diagonal brace end fittings and mating fittings.

2. Do a detailed inspection of all affected fittings and the diagonal brace tubes in accordance with FIGURE 1.

3. If a High Frequency Eddy Current (HFEC) inspection of the diagonal brace tube or brace end fittings and HFEC or alternative dye penetrant inspection of the mating fittings are scheduled, support the weight of the airplane on jacks at wing and body Jack Points I, II, VI. Refer to 707/720 Structural Repair Manual Subject 51-6-1 as an accepted procedure.

4. With airplane stabilized on jacks, support the weight of the engine and strut to remove all load from the brace coupling pins. If engine has been removed for any reason, support the weight of the nacelle strut. Remove coupling pins and remove diagonal braces from mating fittings.

5. Do a HFEC inspection of the fittings (or alternative dye penetrant inspection of vertical webs on aft mating fittings) and do a HFEC inspection of the diagonal brace tube in accordance withFIGURE

2.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 44 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

6. If bushing is removed on mating fittings for an open hole HFEC inspection, do the repair of the fitting hole and bushing within the allowable limits in accordance with FIGURE 2.

7. If any crack is found, except for any crack in the lug holes of the forward or aft mating fitting within repair limits, replace the cracked fitting or diagonal brace tube in accordance with FIGURE 3. If any crack is found in the aft mating fitting on the lower surface of the wing, defuel and purge the wing tank. Refer to 707/720 Maintenance Manual Chapter 28 as an accepted procedure. If any crack is found in the forward mating fitting, remove engine. Refer to 707/720 Maintenance Manual Subject 71-5-0 as an accepted procedure.

8. After replacement of an aft mating fitting, refuel the wing tank and check for fuel leaks at the fitting.

If any leak is found contact The Boeing Company for repair instructions and do the repair. After replacement of a forward mating fitting, reinstall engine and check engine systems.

9. Upon completion of inspection, repair, modification or replacement, remove supports at engine or strut, remove airplane jacks and reinstall fairings.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4: February 21, 2017 45 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Page 46OCROpen in PDF

BOEING SERVICE BULLETIN A3364

ALERT ALERT

5)

INBOARD AND OUTBOARD NACELLE

STRUT DIAGONAL BRACE

TYPICAL EACH END 2538461 FIGURE 1: DETAILED INSPECTION OF FITTINGS AND DIAGONAL BRACE TUBE (SHEET 1 OF 2) Original Issue: June 29, 1979 Revision 4 February 21, 2017 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 57

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.

1. Do a detailed inspection for any crack in the exposed surface of the inboard and outboard nacelle strut diagonal brace end fittings. Particular attention should be given to the surface of the fitting where it enters the tube. Use of a bright light and mirror is suggested as an aid in inspecting the less accessible areas of the fitting.

2. At both ends of the diagonal brace tube, do a detailed inspection for any crack around the fasteners attached to the end fittings.

3. If any crack is found on the diagonal brace end fittings or the diagonal brace tube, support engine as described in the general accomplishment instructions, remove coupling pins and attach fasteners and replace cracked parts in accordance with FIGURE 3.

4. At the forward mating fitting on the nacelle strut, do a detailed inspection of the exposed portions of the fitting lugs for any crack. Particular attention should be given to the central area of the aft edge of the lugs.

5. If any crack is found in the edge of a lug, support engine and remove the coupling pin. Typical cracks originate at the lug hole and propagate approximately horizontally to the edge of the lug. Replace such cracked fittings in accordance with FIGURE 3. If a different type crack is found, contact The Boeing Company for repair instructions and do the repair.

6. At the aft mating fitting on the wing lower surface, do a detailed inspection of the edge of the lug and the forward and aft vertical webs of the fitting. Use of a bright light and mirror is suggested as an aid in inspecting the less accessible area of the lug edge. Particular attention should also be given to the forward web radius where the web meets the fitting lug and to the aft web where the web angle changes or the web thickness changes.

7. If any crack is found, replace the cracked fitting in accordance with FIGURE 3.

FIGURE 1: DETAILED INSPECTION OF FITTINGS AND DIAGONAL BRACE TUBE (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 29, 1979 A3364Revision 4 February 21, 2017 47 of 57 BOEING SERVICE BULLETIN A3364

ALERTALERT

Page 48OCROpen in PDF

BOEING SERVICE BULLETIN A3364

ALERT ALERT

INBOARD AND OUTBOARD NACELLE TYPICAL EACH END

STRUT DIAGONAL BRACE

B-B POSSIBLE CRACK LOCATIONS

END FITTING 4 INNERMOST END

END FITTING

OUTER SURFACE

TYPICAL EACH END OUTER BRACE TUBE INNER RADIUS RADIUS A-A 2538498 FIGURE 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND ALTERNATIVE DYE PENETRANTINSPECTION

OF DIAGONAL BRACE TUBE, FITTINGS AND MODIFICATION (SHEET 1 OF 4) Original Issue: June 29, 1979 Revision 4 February 21, 2017 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3364 Work - See page 1 for details. 48 of 57

Pages 49–57 of 57