Copy · U.S. DOT/FAA - Service Bulletin - 707-A3536-00 · 76 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0215; AD 2016-19-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '39a44bdb231341403e999467b9a66bee5ea742b94ba1369d7879242c726f1967'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 1–12

D. Description Get access to the MCD. Do a detailed inspection of the cam latches and latch pins. Check the torque of the cross bolts in the latch pins. Measure the extension of the latch pins. Replace all alloy steel cross bolts through the latch pins with CRES cross bolts. Do a High Frequency Eddy Current (HFEC) or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracks. Replace any cracked or broken parts. Rig the MCD to the requirements for door flushness, cam latch/latch pin concentricity, latch pin fitting forward/aft gap and shim thickness. Do the latch mechanism adjustment test and post-rigging inspections in accordance with this service bulletin.

The work in this service bulletin is done in the maintenance zone(s) given below.

Affected Maintenance Zones ZoneModel 2-49707-300, 707-300B, 707-300C E. Compliance The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Within 150 days after the original issue date of this service bulletin.

Within 330 flight cycles after the original issue date of this service bulletin.

Do the following for all MCD cam latches and latch pins:

Do a detailed inspection of the cam latches and latch pins in accordance with Accomplishment Instruction 3.B.1.b.

All airplanes AND Torque the cross bolts in the latch pins in accordance with Accomplishment Instruction 3.B.1.c.

AND Measure the extension of the latch pins in accordance with Accomplishment Instruction 3.B.1.d.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 13 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Before further flight.Replace all cracked or broken part(s) and replace all alloy steel cross bolts through the latch pins with Corrosion Resistant Steel (CRES) cross bolts in accordance with Accomplishment Instruction 3.B.2.a.

Inspection Condition 1 - If the inspections reveal one or more of the following:

1. Cracked or broken cam latch(es).

2. Cracked or broken latch pin(s).

3. Broken latch pin cross bolt(s).

AND -Before further flight.Unless replaced with new parts, do a High Frequency Eddy Current (HFEC) or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction 3.B.2.b.

AND -Before further flight.Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.2.c.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 14 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Within 150 days after the initial inspection.

Within 330 flight cycles after the initial inspection.

Contact Boeing for rework instructions and do the rework instructed by Boeing in accordance with Accomplishment Instruction 3.B.3.a.

Inspection Condition 2 - If the inspections reveal one or more of the following:

1. Local deformation of the cam latch lip.

2. Flaking of the chrome plating on the cam latch or latch pin.

3. Wear of the chrome plating down to the base material of the cam latch or latch pin.

AND Replace all cam latches and latch pins in accordance with Accomplishment Instruction 3.B.3.b.

AND 330 flight cycles or 150 days (whichever occurs first). (a) Within 150 days after the initial inspection.

Within 330 flight cycles after the initial inspection.

Do a detailed inspection of the cam latches and latch pins in accordance with Accomplishment Instruction 3.B.3.c.

AND -Within 24 months after the original issue date of this service bulletin.

Within 3000 flight cycles after the original issue date of this service bulletin.

Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.3.d.

AND Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with Accomplishment Instruction 3.B.3.e.

AND Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.3.f.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 15 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Before further flight.Contact Boeing for additional inspection and/or repair instructions and do the inspection and/or repair in accordance with the Boeing instructions in accordance with Accomplishment Instructions

3.B.4.a.

Inspection Condition 3 - If the initial inspections reveal one or more signs of the following:

1. Corrosion of the cam latch or latch pin.

2. Gouges and/or scrapes in the cam latch or latch pin chrome plating or base material.

3. Deformations of the cam latch or latch pin.

4. Any other damage not identified in Inspection Conditions 1 and

2.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 16 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Within 150 days after the initial inspection.

Within 330 flight cycles after the initial inspection.

Replace the latch pin in accordance with Accomplishment Instruction

3.B.5.a.(1).

Inspection Condition 4.1 - If the latch pin extension is less than 0.84 inches or greater than 0.94 inches.

AND Remove the mating cam latch and do a detailed inspection in accordance with Accomplishment Instruction 3.B.5.a.(2).

AND 330 flight cycles or 150 days (whichever occurs first). (a) Within 150 days after the initial inspection.

Within 330 flight cycles after the initial inspection.

Do a general visual inspection of the cam latches and latch pins for broken, cracked, deformations, flaking or wear of the chrome plating in accordance with Accomplishment Instruction

3.B.5.a.(3).

AND -Within 24 months after the original issue date of this service bulletin.

Within 3000 flight cycles after the original issue date of this service bulletin.

Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.5.a.(4).

AND Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with Accomplishment Instruction 3.B.5.a.(5).

AND Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.5.a.(6).

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 17 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition 330 flight cycles or 150 days (whichever occurs first). (a) Within 150 days after the initial inspection.

Within 330 flight cycles after the initial inspection.

Do a detailed inspection of the cam latches and latch pins in accordance with Accomplishment Instruction 3.B.5.b.(1).

Inspection Condition 4.2 - If the latch pin extension is greater than or equal to

0.84 inches and less than or equal to 0.89 inches or greater than or equal to

0.91 inches and less than or equal to 0.94 inches.

AND -Within 24 months after the original issue date of this service bulletin.

Within 3000 flight cycles after the original issue date of this service bulletin.

Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.5.b.(2).

AND Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with Accomplishment Instruction 3.B.5.b.(3).

AND Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.5.b.(4).

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 18 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition 330 flight cycles or 150 days (whichever occurs first). (a) Within 150 days after the initial inspection.

Within 330 flight cycles after the initial inspection.

Do a general visual inspection in accordance with Accomplishment Instruction 3.B.6.a.

Inspection Condition 5 - If the inspections reveal no signs of damage, distress or incorrect rigging as described in Inspection Conditions 1 through 4. AND 3000 flight cycles or 24 months (whichever occurs first). (a) 24 months after the initial inspection.

Within 3000 flight cycles after the initial inspection.

Do a detailed inspection of the cam latches and latch pins in accordance with Accomplishment Instruction 3.B.6.b.

AND Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.6.c AND -Within 48 months after the original issue date of this service.

Within 6000 flight cycles after the original issue date of this service bulletin.

Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with Accomplishment Instruction 3.B.6.d.

AND Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.6.e.

(a) Accomplishment of the MCD rig and the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.2.c. or 3.B.3.f. or 3.B.5.a.(6) or 3.B.5.b.(4) or 3.B.6.e. terminates repeat inspections.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 19 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 2: Repetitive Post-Rigging Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition 330 flight cycles or 150 days (whichever occurs first).

Within 150 days after the MCD rig.

Within 330 flight cycles after the MCD rig.

Do a general visual inspection in accordance with Accomplishment Instruction 3.B.7.a.(1).

All airplanes that have completed the MCD rig in accordance with Accomplishment Instruction

3.B.2.c. or 3.B.3.f. or

3.B.5.a.(6) or 3.B.5.b.(4) or

3.B.6.e.

AND 3000 flight cycles or 24 months (whichever occurs first).

Within 24 months after the MCD rig.

Within 3000 flight cycles after the MCD rig.

Do a detailed inspection of the cam latches and latch pins in accordance with Accomplishment Instruction 3.B.7.a.(2).

AND 6000 flight cycles or 48 months (whichever occurs first).

Within 48 months after the MCD rig.

Within 6000 flight cycles after the MCD rig.

Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.7.a.(3).

-Before further flight.Replace all cracked or broken part(s) in accordance with Accomplishment Instruction

3.B.7.b.(1).

Post-rigging Inspection Condition 1 - If the inspections reveal one or more of the following:

1. Cracked or broken cam latch(es).

2. Cracked or broken latch pin(s).

3. Broken latch pin cross bolt(s).

AND -Before further flight.Unless replaced with new parts, do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.7.b.(2).

AND -Before further flight.Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.7.b.(3).

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 20 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 2: Repetitive Post-Rigging Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Within 150 days after the postrigging inspection.

Within 330 flight cycles after the post-rigging inspection.

Contact Boeing for rework instructions and do the rework instructed by Boeing in accordance with Accomplishment Instruction 3.B.7.c.(1).

Post-rigging Inspection Condition 2 - If the inspections reveal one or more of the following:

1. Local deformation of the cam latch lip.

2. Flaking of the chrome plating on the cam latch or latch pin.

3. Wear of the chrome plating down to the base material of the cam latch or latch pin.

AND Replace all cam latches and latch pins in accordance with Accomplishment Instruction

3.B.7.c.(2).

AND 330 flight cycles or 150 days (whichever occurs first).

Within 150 days after the postrigging inspection.

Within 330 flight cycle after the post-rigging inspection.

Do a detailed inspection of the remaining cam latches and latch pins in accordance with Accomplishment Instruction

3.B.7.c.(3).

AND -Within 24 months after the post-rigging inspection.

Within 3000 flight cycles after the post-rigging inspection.

Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 in accordance with Accomplishment Instruction

3.B.7.c.(4).

AND Rig the MCD and do the latch mechanism adjustment test in accordance with Accomplishment Instruction 3.B.7.c.(5).

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 21 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Table 2: Repetitive Post-Rigging Inspections of the Cam Latches and Latch Pins for the Main Cargo Door (MCD) Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs First) ActionCondition -Before further flight.Contact Boeing for additional inspection and/or repair instructions and do the inspection and/or repair in accordance with the Boeing instructions in accordance with Accomplishment Instruction

3.B.7.d.(1).

Post-rigging Inspection Condition 3 - If the inspections reveal one or more signs of the following:

1. Corrosion of the cam latch or latch pin.

2. Gouges and/or scrapes in the cam latch or latch pin chrome plating or base material.

3. Deformations of the cam latch or latch pin.

4. Any other damage not identified in Inspection Conditions 1 and

2.

F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.

G. Manpower The table below shows an estimate of the task hours necessary to do the inspections and modifications for each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time. These are some examples of lost time:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 22 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

 Time to adjust to the workplace  Time to schedule the work  Time to inspect the work  Time to cure the materials  Time to make the parts  Time to find the tools.

Elapsed HoursTask HoursNumber of PersonsTask

0.250.251Open Access

1.601.601FIGURE 1

0.500.501FIGURE 2

0.500.501FIGURE 3

1.00 (h)1.00 (h)1FIGURE 4

1.001.001FIGURE 5

0.50 (a) (f) (i)0.50 (a) (f) (i)1(i)FIGURE 6

0.10 (b) (g)0.10 (b) (g)1FIGURE 7

0.60 (c)0.60 (c)1FIGURE 8

0.10 (d)0.10 (d)1FIGURE 9

20.0048.002-3FIGURE 10 - FIGURE 11

0.250.251Close Access

(e)(e)TOTAL FOR EACH AIRPLANE

(a) Estimate is per cam latch requiring replacement.

(b) Estimate is per latch pin requiring replacement.

(c) Estimate is per cam latch requiring inspection.

(d) Estimate is per cam latch.

(e) Total time required may vary depending upon conditions found during inspections.

(f) Does not include time to match drill cam shaft.

(g) Does not include time to match drill latch pin

(h) Does not include inspection time

(i) Cam latch 4 will require 2 hours and a second person to remove.

H. Weight and Balance Changes None.

I. Electrical Load Data Not changed.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 23 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

J. References

1. Existing Data

a. Boeing Service Bulletin 707-3477.

b. Boeing Service Related Problem (SRP) 707-SRP-52-0088.

c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 91-22-04.

d. Standard Overhaul Practices Manual (SOPM) 20-20-01.

e. 707 Aircraft Maintenance Manual (AMM) 52-11-0.

f. 707 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00.

2. Data supplied with this Service Bulletin None.

3. Installation Drawings Used in the Preparation of this Service Bulletin TitleDrawing Number DOOR INSTALLATION - MAIN CARGO65-25326 LATCH MECHANISM INSTALLATION - MAIN CARGO DOOR65-25339 SILL INSTL - LOWER, MAIN CARGO DOOR65-25343 LATCH PIN FITTING - ASSY65-25771 CAM - LATCH MECHANISM CARGO DOOR69-23438 BODY INSTALLATION - SECTION 4350-2543 These drawings were used to prepare this service bulletin. These drawings are not necessary to make the specified changes, and are not supplied with this service bulletin. These drawings may not be applicable to all airplane configurations or operators.

K. Publications Affected None.

L. Interchangeability and Intermixability of Parts Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 24 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Pages 25–36 of 76