Copy · U.S. DOT/FAA - Service Bulletin - 707-A3536-00 · 76 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0215; AD 2016-19-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '39a44bdb231341403e999467b9a66bee5ea742b94ba1369d7879242c726f1967'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 13–24

2. MATERIAL INFORMATION A. Material - Price and Availability The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin does not show the Boeing price and supply data.

B. Industry Support Information Boeing warranty remedies are not available for the inspections and modifications given in this service bulletin.

C. Parts Necessary For Each Airplane

1. Kits/Parts None.

2. Parts and Materials Supplied by the Operator NotesNameQTYPart Number / Specification

(a) (b)BOLT, HEX HEAD, 160 KSI MIN TENSILE, LONG THREAD, A286,

NONLOCKING 8BACB30LM3-24 OR BACB30LM3-22 Parts are only needed if existing part cannot be reworked. (c) Cam Latch 1-69-23438-2 Cam Latch 2-143N8060-1 Cam Latch 3-143N8027-2 Cam Latch 4-69-23439-3 Cam Latch 5-69-23439-4 Cam Latch 6-143N8027-1 Cam Latch 7-143N8060-2 Cam Latch 8-69-23438-1 Latch Pin-6-83137-2

(d)Corrosion Inhibiting Compound5 oz.BMS 3-27

(d)Pressure and Environmental Sealant 5 oz.BMS 5-95, TYPE 1, CLASS B 1/2

(e)Flexbar ReproRubber Quicksetting Putty or equivalent 8 oz-

(f)Rod, 3/16 diameter, 2 inches long1-

(a) Refer to 707 Structural Repair Manual Chapter 51 for alternate fasteners.

(b) BACB30LM3-24 is used if optional 143N8157-2 Clip Assembly is installed.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 25 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

NotesNameQTYPart Number / Specification

(c) Drill attachment holes to the new latch cam to match with the existing bell crank assembly to ensure proper installation and clocking.

(d) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.

(e) Available from Flexbar Machine Corp. (2R260), 250 Gibbs Road, Islandia, NY 11749, USA.

(f) Used for aligning the rigging pin slot with the cross bolt hole in accordance with AP- PENDIX A.

3. Parts Modified and Reidentified None.

4. Parts Removed and Not Replaced None.

D. Parts Necessary to Change Spares None.

E. Special Tooling - Price and Availability Boeing can supply the tool(s) shown in Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin. Operators are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin. The tool(s) are subject to the terms and conditions of the Boeing standard purchase order acknowledgement. Prices are in United States Dollars. Terms: Net 30 days.

Reference this service bulletin and submit your purchase order by one of these methods:

1. Order on-line via ATA Spec 2000 or Boeing Part Page

2. Fax to (206) 662-7145 REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPON- DER AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFOR- MATION Purchase Data:

Unit Price as of the Original Issue date of this Service Bulletin (US Dollars) NameTool Kit Number 8,821.00Pin Set - Rigging, Main Deck, Main Cargo Door B52029-1

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 26 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Rental Data Daily Price as of the Original Issue date of this service bulletin (US Dollars) NameTool Kit Number

180.00Pin Set - Rigging, Main Deck, Main Cargo Door B52029-1 F. Special Tooling Necessary to do this Service Bulletin To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.

Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be necessary. Examine operator tool supply to make sure all necessary tools are available.

NameTool Kit Number Pin Set - Rigging, Main Deck, Main Cargo DoorB52029-1

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 27 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 28 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

BLANK PAGE

3. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,

METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.

NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for definition of the acronyms.

2. Obey all of the warnings and cautions given in the specified manual sections.

3. Unless shown differently, these dimensions and tolerances are used:

– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Torque limits to tighten nuts and bolts are in 707 SRM, Chapter 51

4. Use the approved fastener and process material substitutions in accordance with 707 SRM, Chapter 51. Alternate fasteners are listed in 707 SRM Chapter 51.

5. If the length of any fastener specified in this service bulletin does not meet the installation standards in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in SRM Chapter 51 may be used.

6. A Detailed Inspection is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures may be required.

7. A General Visual Inspection is defined as: A visual examination of an interior or exterior area, installation or assembly to detect obvious damage, failure or irregularity.

This level of inspection is made from within touching distance unless otherwise specified. A mirror may be necessary to ensure visual access to all surfaces in the inspection area. This level of inspection is made under normal available lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may require removal or opening of access panels or doors. Stands, ladders or platforms may be required to gain proximity to the area being checked.

8. These work instructions refer to procedures included in other Boeing documents.

When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 29 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

B. WORK INSTRUCTIONS NOTE: It is important to do the following steps in the specified order.

1. Initial Inspections

a. Open the Main Cargo Door to get access to the cam latches and latch pins. Refer to 707 AMM 52-11-01 as an accepted procedure.

b. Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE 1.

c. Torque the cross bolts in the latch pins in accordance with FIGURE 2.

d. Measure the extension of the latch pins in accordance with FIGURE 3.

2. Inspection Condition 1:

If the inspections reveal one or more signs of the following:

– Cracked or broken cam latch(es) – Cracked or broken latch pin(s) – Broken latch pin cross bolt(s)

a. Replace cam latch in accordance with FIGURE 6, replace latch pin in accordance with FIGURE 7 and replace latch pin cross bolts with CRES cross bolts in accordance with FIGURE 5.

b. Unless replaced with new parts, do a High Frequency Eddy Current (HFEC) or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracks in accordance with FIGURE 4. Address the inspection findings as described in Inspection Condition 1.

c. Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

3. Inspection Condition 2:

If the inspections reveal one or more signs of the following:

– Local deformation of the cam latch lip – Flaking of the chrome plating on the cam latch or latch pin – Wear of the chrome plating down to the base material of the cam latch or latch pin

a. Contact Boeing for rework instructions and do the rework instructed by Boeing.

NOTE: Boeing recommends the operator provide a detailed description of the cam latch deformations (including size and location, as well as the total number of flights the cam latch has been in service) so that Boeing has time to determine rework instructions and the operator has time to organize the resources needed to complete the changes within the applicable compliance period.

b. Replace all cam latches and latch pins with signs of flaking of the chrome plating or wear down to the base material in accordance with FIGURE 6 and FIGURE 7.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 30 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

c. Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE 1.

Address the inspection findings as described in Inspection Conditions 1 through 4.

d. Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracking in accordance with FIGURE 4. Address the inspection findings as described in Inspection Condition 1.

e. Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with FIGURE 5.

f. Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

4. Inspection Condition 3:

If the inspections reveal one or more signs of the following:

– Corrosion of the cam latch or latch pin – Gouges and/or scrapes in the cam latch or latch pin chrome plating or base material – Deformations of the cam latch or latch pin – Any other damage not identified in Inspection Conditions 1 and 2.

a. Contact Boeing for additional inspection and/or repair instructions and do the applicable inspection and/or repair in accordance with the Boeing instructions.

NOTE: Boeing recommends the operator provide a detailed description of the inspection findings (including photographs if possible).

5. Inspection Condition 4:

a. Inspection Condition 4.1 - If the latch pin extension is less than 0.84 inches or greater than

0.94 inches:

(1) Replace the latch pin in accordance with FIGURE 7.

(2) Remove the mating cam latch and do a detailed inspection in accordance with FIGURE

8. Address the inspection findings as described in Inspection Condition 1.

(3) Do a general visual inspection of the cam latches and latch pins in accordance with FIGURE 9. Address the inspection findings as described in Inspection Condition 1.

(4) Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracking in accordance with FIGURE 4. Address the inspection findings as described in Inspection Condition 1.

(5) Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with FIGURE 5.

(6) Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 31 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

b. Inspection Condition 4.2 - If the latch pin extension is greater than or equal to 0.84 inches and less than or equal to 0.89 inches or greater than or equal to 0.91 inches and less than or equal to 0.94 inches:

(1) Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE

1. Address the inspection findings as described in Inspection Conditions 1 through 3.

(2) Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracking in accordance with FIGURE 4. Address the inspection findings as described in Inspection Condition 1.

(3) Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with FIGURE 5.

(4) Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

NOTE: Rigging for the latch pin will require it to be installed properly with an extension of 0.90 +/- 0.01 inches. A latch pin originally in condition 4.2 with no other discrepancies may be re-used by clocking the latch pin 90 degrees +/- 10 degrees from original position and match drilling a new cross bolt hole that provides the correct latch pin extension. Fill old cross bolt hole in latch pin with BMS 5-95 sealant and install pin with BMS 3-27 corrosion inhibiting compound.

6. Inspection Condition 5:

If the inspections reveal no signs of damage, distress, or incorrect rigging as described in Inspection Conditions 1 through 4:

a. Do a general visual inspection of the cam latches and latch pins in accordance with FIGURE

9. Address the inspection findings as described in Inspection Condition 1.

b. Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE 1.

Address the inspection findings as described in Inspection Conditions 1 through 5.

c. Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracking in accordance with FIGURE 4. Address the inspection findings as described in Inspection Condition 1.

d. Replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance with FIGURE 5.

e. Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

7. Post-Rigging Inspections for Airplanes that have completed the Main Cargo Door rig in accordance with FIGURE 10 and FIGURE 11:

a. Post-Rigging Inspection of all airplanes:

(1) Do a general visual inspection of the cam latches and latch pins in accordance with FIGURE 9. Address the inspection findings as described in Post-Rigging Inspection Condition 1.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 32 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

(2) Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE

1. Address the inspection findings as described in Post-Rigging Inspection Conditions 1 through 3.

(3) Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracking in accordance with FIGURE 4. Address the inspection findings as described in Post-Rigging Inspection Condition 1.

b. Post-rigging Inspection Condition 1:

If the post-rigging inspections reveal one or more of the following:

– Cracked or broken cam latch(es) – Cracked or broken latch pin(s) – Broken latch pin cross bolt(s)

(1) Replace cam latch in accordance with FIGURE 6, replace latch pin in accordance with FIGURE 7 and replace latch pin cross bolt in accordance with FIGURE 5.

(2) Unless replaced with new parts, do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracks in accordance with FIGURE 4. Address the inspection findings as described in Post-Rigging Inspection Condition 1.

(3) Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

c. Post-rigging Inspection Condition 2:

If the post-rigging inspections reveal one or more of the following:

– Local deformation of the cam latch lip – Flaking of the chrome plating on the cam latch or latch pin – Wear of the chrome plating down to the base material of the cam latch or latch pin

(1) Contact Boeing for rework instructions and do the rework instructed by Boeing.

NOTE: Boeing recommends the operator provide a detailed description of the cam latch deformations (including size and location, as well as the total number of flights the cam latch has been in service) so that Boeing has time to determine rework instructions and the operator has time to organize the resources needed to complete the changes within the applicable compliance period.

(2) Replace all cam latches and latch pins with signs of flaking of the chrome plating or wear down to the base material in accordance with FIGURE 6 and FIGURE 7.

(3) Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE

1. Address the inspection findings as described in Post-Rigging Inspection Conditions 1 through 3.

(4) Do a HFEC or magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracking in accordance with FIGURE 4. Address the inspection findings as described in Inspection Condition 1.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 33 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

(5) Rig the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11 and do the latch mechanism adjustment test in accordance with APPENDIX A.

d. Post-rigging Inspection Condition 3:

If the post-rigging inspections reveal one or more of the following:

– Corrosion of the cam latch or latch pin – Gouges and/or scrapes in the cam latch or latch pin chrome plating or base material – Deformations of the cam latch or latch pin – Any other damage not identified in Inspection Conditions 1 and 2.

(1) Contact Boeing for additional inspection and/or repair instructions and do the applicable inspection and/or repair in accordance with the Boeing instructions.

NOTE: Boeing recommends the operator provide a detailed description of the inspection findings (including photographs if possible).

8. Put the airplane back to a serviceable condition.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: February 06, 2012 A3536 34 of 76 BOEING SERVICE BULLETIN A3536

ALERTALERT

Page 35OCROpen in PDF

BOEING SERVICE BULLETIN А3536

ALERT ALERT

(6) C (5) C C 2089401 FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION (SHEET 1 OF 3) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 35 of 76

Page 36OCROpen in PDF

BOEING SERVICE BULLETIN А3536

ALERT ALERT

LATCH PIN (8 LOCATIONS)

(9)

POTENTIAL

CRACKING AREA

CHROME WEAR

THROUGH GOUGES

POTENTIAL

CRACKING AREAS

CAM LATCH CHROME WEAR

THROUGH GOUGES

PROTRUDING LIP ON

EDGE OF CAM HEAD 2089729 FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION (SHEET 2 OF 3) Original Issue: February 06, 2012 BOEING PROPRIETARY - A3536 Copyright © Unpublished Work - See page 1 for details. 36 of 76

Pages 37–48 of 76