Copy · U.S. DOT/FAA - Service Bulletin - 707-00A3539-00 · 110 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0009; AD 2014-13-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '6a0ac8f59b887b835591433a550daf7922c5d99625fd0f99cdd5c4f57cb35267'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 61–72

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP S-20L, STA 960 To STA 1164.10 S-20L, STA 1164.10 To STA 1265.20 S-25L, STA 312 To STA 360 S-25L, STA 441 To STA 481 S-29L, STA 960 To STA 1144.10 S-29L, STA 1144.10 To STA 1265.20

(a) Do a detailed inspection of the fuselage skin for any scribe line. Use a minimum 10X magnifying lens to aid the inspection.

(b) In areas near lap joints, scribe lines normally run parallel to the lap joint in the lower skin along the edge of the upper skin. These scribe lines are typically within 0.25 inch of the lower edge of the upper skin. In some cases, portions of the scribe lines may be directly adjacent to or slightly under the lower edge of the upper skin. The ends of these scribe lines sometimes may also turn slightly away from the lap joint.

FIGURE 4: FUSELAGE - SKIN LAP JOINTS - INSPECTION (SHEET 4 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 73 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Page 74OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT This Figure applies only to: Group 1.

SECTION 46 000000 0000000000000001 STA 960 707-100B STA 820 LANDING GEAR DOOR 00 LANDING GEAR DOOR INSPECTION AREA EXISTING BUTT JOINT S-18AR S-18AL

•SECTION 43 5.0 (TYPICAL) STA 600K S-30R 0000000000000000 S-30L SECTION 41 sees is 2198849 FIGURE 5: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 1 OF 3) Original Issue: April 26, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3539 Work - See page 1 for details. 74 of 110

Page 75OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT

TYPICAL SCRIBE LINES

• SKIN PANEL

EXTERNAL

APPROVED REPAIR

TYPICAL EXTERNAL APPROVED REPAIR

EXTERNAL APPROVED REPAIR SKIN A-A 2198862 FIGURE 5: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 2 OF 3) Original Issue: April 26, 2013 Export Controlled ECCN: 9E991 - BOEING A3539 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 75 of 110

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.

CAUTION: DO NOT BLEND SCRIBE LINES. BLENDING A SCRIBE LINE MAY HINDER INSPECTION

TECHNIQUES NECESSARY TO DETERMINE THE PRESENCE OR ABSENCE OF FATIGUE CRACKS.

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(a) (b) (c)-STA 259.50 To STA 1440 - S30R To S30L SkinInspect1

(a) Do a detailed inspection of the fuselage skin around external approved repairs for any scribe line. Use a minimum 10X magnifying lens to aid the inspection.

(b) Scribe lines normally run parallel to the external approved repair along the edge of the repair. These scribe lines are typically within 0.25 inch of the repair. In some cases, portions of the scribe lines may be directly adjacent to or slightly under the edge of the repair.

(c) If the repair ends at a butt splice, inspect the butt splice strap at the repair area plus ten (10) inches above and below the repair.

FIGURE 5: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 76 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Page 77OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT This Figure applies only to: Group 2.

0 -

• SECTION 46 STA 960 60000000000000000000 S-20R LANDING GEAR DOOR LANDING GEAR DOOR 707-300 STA 820 S-18AR S- 18AL INSPECTION AREA EXISTING BUTT JOINT

•SECTION 43 - 5.0 (TYPICAL) STA 600K S-30R 0000000 00000000 S-30L

•0000 •

• SECTION 41 FIGURE 6: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 1 OF 3) Original Issue: April 26, 2013 Export Controlled ECCN: 9E991 - BOEING A3539 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 77 of 110

Page 78OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT

1)

TYPICAL SCRIBE LINES A

• SKIN PANEL

EXTERNAL

APPROVED REPAIR

TYPICAL EXTERNAL APPROVED REPAIR A

EXTERNAL APPROVED REPAIR SKIN A-A 2198852 FIGURE 6: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 2 OF 3) Original Issue: April 26, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING Work - See page 1 for details. 78 of 110 A3539

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.

CAUTION: DO NOT BLEND SCRIBE LINES. BLENDING A SCRIBE LINE MAY HINDER INSPECTION

TECHNIQUES NECESSARY TO DETERMINE THE PRESENCE OR ABSENCE OF FATIGUE CRACKS.

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(a) (b) (c)-STA 259.50 To STA 1440 - S30R To S30L SkinInspect1

(a) Do a detailed inspection of the fuselage skin around external approved repairs for any scribe line. Use a minimum 10X magnifying lens to aid the inspection.

(b) Scribe lines normally run parallel to the external approved repair along the edge of the repair. These scribe lines are typically within 0.25 inch of the repair. In some cases, portions of the scribe lines may be directly adjacent to or slightly under the edge of the repair.

(c) If the repair ends at a butt splice, inspect the butt splice strap at the repair area plus ten (10) inches above and below the repair.

FIGURE 6: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 79 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Page 80OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT This Figure applies only to: Group 3.

• SECTION 46 STA 960 0000000000000000 LANDING GEAR DOOR 00000000 LANDING GEAR DOOR 707-300B STA 820 S-18AR S-18AL INSPECTION AREA EXISTING BUTT JOINT SECTION 43 S-30R o c 00000000000000 S-30L (TYPICAL) 000

• SECTION 41 2198853 FIGURE 7: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 1 OF 3) Original Issue: April 26, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3539 Work - See page 1 for details. 80 of 110

Page 81OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT

TYPICAL SCRIBE LINES

• SKIN PANEL

EXTERNAL

APPROVED REPAIR

TYPICAL EXTERNAL APPROVED REPAIR

EXTERNAL APPROVED REPAIR SKIN A-A 2198854 FIGURE 7: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 2 OF 3) Original Issue: April 26, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING Work - See page 1 for details. 81 of 110 A3539

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.

CAUTION: DO NOT BLEND SCRIBE LINES. BLENDING A SCRIBE LINE MAY HINDER INSPECTION

TECHNIQUES NECESSARY TO DETERMINE THE PRESENCE OR ABSENCE OF FATIGUE CRACKS.

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(a) (b) (c)-STA 259.50 To STA 1440 - S30R To S30L SkinInspect1

(a) Do a detailed inspection of the fuselage skin around external approved repairs for any scribe line. Use a minimum 10X magnifying lens to aid the inspection.

(b) Scribe lines normally run parallel to the external approved repair along the edge of the repair. These scribe lines are typically within 0.25 inch of the repair. In some cases, portions of the scribe lines may be directly adjacent to or slightly under the edge of the repair.

(c) If the repair ends at a butt splice, inspect the butt splice strap at the repair area plus ten (10) inches above and below the repair.

FIGURE 7: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: April 26, 2013 A3539 82 of 110 BOEING SERVICE BULLETIN A3539

ALERTALERT

Page 83OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT This Figure applies only to: Group 4.

• SECTION 46 STA 960 000000000000 LANDING GEAR DOOR 00000000 LANDING GEAR DOOR 707-300C STA 820 S-18AR S-18AL INSPECTION AREA EXISTING BUTT JOINT

•SECTION 43 - 5.0 (TYPICAL) STA 600K S-30R 000000 00000000000000 S-30L SECTION 41 2198855 FIGURE 8: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 1 OF 3) Original Issue: April 26, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3539 Work - See page 1 for details. 83 of 110

Page 84OCROpen in PDF

BOEING SERVICE BULLETIN А3539

ALERT ALERT

1)

TYPICAL SCRIBE LINES A

• SKIN PANEL

EXTERNAL

APPROVED REPAIR

TYPICAL EXTERNAL APPROVED REPAIR A

EXTERNAL APPROVED REPAIR SKIN A-A 2198856 FIGURE 8: FUSELAGE - EXTERNAL APPROVED REPAIRS - INSPECTION (SHEET 2 OF 3) Original Issue: April 26, 2013 PROPRIETARY - Copyright © Unpublished Export Controlled ECCN: 9E991 - BOEING A3539 Work - See page 1 for details. 84 of 110

Pages 85–96 of 110