On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 30Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-0876, the docket of a proposed AD (Federal Register 2022-20442, 2024-05913). Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2e69d40aeafe5dac1419047069b893dc6e124e66c6af9f6d0240c67eed29e7c9' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2e69d40aeafe5dac1419047069b893dc6e124e66c6af9f6d0240c67eed29e7c9' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Requirements Bulletin B787-81205-SB250254-00 RB EQUIPMENT AND FURNISHINGS - Passenger Compartment Panel and Lining - Doorway Assist Handle Support Bracket Retainer Installation Copyright © 2021 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
ECCN: 9E991 B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 1 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
2.0 B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A .E F F E C T I V I T Y3
1. Airplanes3
2 . S p a r e s A f f e c t e d3
B. CONCURRENT REQUIREMENTS4
C .C O M P L I A N C E4
D. APPROVAL4
E. ACCOMPLISHMENT INSTRUCTIONS5
1. General Information5
2. Work Instructions5
TASK 1 – DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - TEMPORARY INSTALLATION [Group 1-3] .............................................. 1 0 TASK 2 – LEFT SIDE DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - FINAL INSTALLATION [Group 1-3] .............................................. 1 4 TASK 3 – RIGHT SIDE DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - FINAL INSTALLATION [Group 1-3] .................................... 1 8 TASK 4 – LEFT AND RIGHT SIDE DOORWAY ASSIST HANDLE SUPPORT BRACKET - IDENTIFICATION [Group 1-3] .............................................. 2 2 Appendix B – DOORWAY ASSIST HANDLE SUPPORT BRACKET ASSEMBLY IDENTIFICATION [Group 1] .................................................. 2 5 Appendix C – DOORWAY ASSIST HANDLE SUPPORT BRACKET ASSEMBLY IDENTIFICATION [Group 2] .................................................. 2 7 Appendix D – DOORWAY ASSIST HANDLE SUPPORT BRACKET ASSEMBLY IDENTIFICATION [Group 3] .................................................. 2 9 B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 2 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-10 Airplane(s), line number(s) 528, 548, 565, 622, 656, 672, 686, 697, 709, 731, 743, 754, 763, 770, 777, 782, 789, 795, 800, 809, 814, 816, 822, 828, 834, 838, 842, 848, 852, 856, 862, 866, 872, 880, 882, 890, 896 in 3 Group(s).
The Variable Numbers and Group information for the applicable airplanes is given below.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-10 Airplane line number 528, 548, 565, 622, 656, 672, 686, 697, 709, 731, 743, 754, 763, 770, 777, 782, 789, 795, 800, 809, 814, 816 and 822.
-1 787-10 Airplane line number 828, 834, 838, 842 and 848.-2 787-10 Airplane line number 852, 856, 862, 866, 872, 880, 882, 890 and 896.
-3 Airplane Models: 787-10 Table 2 GroupVariable Number 1ZC001 - ZC009 2ZC010 - ZC011 3ZC012 - ZC014 1ZC036 - ZC043 2ZC044 GroupVariable Number 1ZC061 - ZC065 2ZC066 1ZC116 3ZC117 2ZC126 GroupVariable Number 3ZC127 3ZC151 3ZC155 - ZC156 3ZC211 --
2. Spares Affected None.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 3 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB250254-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB250254-00 RB mandatory.
Accomplish the required actions, based on the applicable conditions in Table 4, in accordance with Accomplishment Instructions.
The Conditions, Actions and Compliance times shown apply to each passenger entry door independently.
Table 4 LEFT AND RIGHT SIDE PASSENGER ENTRY DOOR 1, 2, 3 AND 4 - DOORWAY ASSIST HANDLE
SUPPORT BRACKET - RETAINER INSTALLATION Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 60 months after the Issue 001 date of the Requirements Bulletin B787-81205- SB250254-00 RB Install a new retainer above the lower keyway of the support bracket assemblies at each passenger entry door forward and aft door assist handle locations and identify changed support bracket assembly with new part number.
All airplanes D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 4 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
5. The work instructions are divided into work packages. Each work package can be completed independently during separate maintenance visits.
6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
8. The CONDITIONS, and ACTIONS shown apply to each passenger service door independently.
2. WORK INSTRUCTIONS A. Actions Required for Compliance
(1) Requirements B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 5 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
Table 1 WORK PACKAGE 1: LEFT SIDE PASSENGER ENTRY DOOR 1 - DOORWAY ASSIST HANDLE SUPPORT
BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the left side passenger entry door 1 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 2 -Task 4 PART 2 CLOSE ACCESS-- Table 2 WORK PACKAGE 2: RIGHT SIDE PASSENGER ENTRY DOOR 1 - DOORWAY ASSIST HANDLE SUP-
PORT BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the right side passenger entry door 1 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 3 -Task 4 PART 2: CLOSE ACCESS-- B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 6 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
Table 3 WORK PACKAGE 3: LEFT SIDE PASSENGER ENTRY DOOR 2 - DOORWAY ASSIST HANDLE SUPPORT
BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the left side passenger entry door 2 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 2 -Task 4 PART 2: CLOSE ACCESS-- Table 4 WORK PACKAGE 4: RIGHT SIDE PASSENGER ENTRY DOOR 2 - DOORWAY ASSIST HANDLE SUP-
PORT BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the right side passenger entry door 2 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 3 -Task 4 PART 2: CLOSE ACCESS-- B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 7 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
Table 5 WORK PACKAGE 5: LEFT SIDE PASSENGER ENTRY DOOR 3 - DOORWAY ASSIST HANDLE SUPPORT
BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the left side passenger entry door 3 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 2 -Task 4 PART 2: CLOSE ACCESS-- Table 6 WORK PACKAGE 6: RIGHT SIDE PASSENGER ENTRY DOOR 3 - DOORWAY ASSIST HANDLE SUP-
PORT BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the right side passenger entry door 3 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 3 -Task 4 PART 2: CLOSE ACCESS-- B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 8 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
Table 7 WORK PACKAGE 7: LEFT SIDE PASSENGER ENTRY DOOR 4 - DOORWAY ASSIST HANDLE SUPPORT
BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the left side passenger entry door 4 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 2 -Task 4 PART 2: CLOSE ACCESS-- Table 8 WORK PACKAGE 8: RIGHT SIDE PASSENGER ENTRY DOOR 4 - DOORWAY ASSIST HANDLE SUP-
PORT BRACKET - RETAINER INSTALLATION Refer to the listed procedures in B787-81205- SB250254-00 Issue 001 or later approved issues as an accepted procedure.
Method of ComplianceActionCondition PART 1: OPEN ACCESS--All Airplanes -Task 1Install a new retainer above the lower keyway of the support bracket assembly at the right side passenger entry door 4 forward and aft door assist handle locations and identify changed bracket assembly with new part number.
-Task 3 -Task 4 PART 2: CLOSE ACCESS-- B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 9 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
Task 1 – DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - TEMPORARY INSTALLATION [Group 1-3:]
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
Procedure This Task applies only to: Group 1-3.
DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - TEMPORARY INSTALLATION ICN-B787-A-000061-A-81205-18156-A-01-1 Figure 1 B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 10 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
A BOEING B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - TEMPORARY INSTALLATION
FORWARD DOORWAY
ASSIST HANDLE
BLOCKING
FEATURE
FASTENER- PLATE KEYWAY
HOLE DOOR HANDLE
FWD TIP A-A 2955378 ICN-B787-A-000061-A-81205-18157-A-01-1 Figure 2
DOORWAY ASSIST HANDLE SUPPORT BRACKET RETAINER - TEMPORARY INSTALLATION B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 11 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
@ BOEING B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM
REQUIREMENTS BULLETIN
AFT DOORWAY
ASSIST HANDLE
BLOCKING
FEATURE
•DOOR
KEYWAY HANDLE
HOLE TIP
FASTENER PLATE B-B ICN-B787-A-000061-A-81205-18158-A-01-1 Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY numbers shown below are the number of parts necessary for each door.
B787-81205-SB250254-00 RB Issue 001, 22 Feb 2021 12:00:00 AM Page 12 of 30 EXPORT CONTROLLED ECCN: 9E991 See title page for details.