On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 13
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2020-0580; AD 2021-02-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b2ab1d59c9ff15f153318aed9d852bb16a8ea76ac6b6254b516c33e4eaf5be4d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b2ab1d59c9ff15f153318aed9d852bb16a8ea76ac6b6254b516c33e4eaf5be4d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Alert Requirements Bulletin B787-81205-SB260007-00 RB FIRE PROTECTION - Engine Fire Control Panel - Left and Right Engine Fire Handle Inspection Copyright © 2019 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
ECCN: 9E991 B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 1 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
3.0 B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected3
B. CONCURRENT REQUIREMENTS3
C. COMPLIANCE3
D. APPROVAL8
E. ACCOMPLISHMENT INSTRUCTIONS9
1. General Information9
2. Work Instructions9
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 2 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-982 in 1 Group(s).
The Effectivity includes all 787-8, 787-9, 787-10 Airplane(s) Line Numbers 6-9990 in 1 Group. Affected airplanes after Line Number 982 will show up as available as they are added to Maintenance Performance Toolbox.
2. Spares Affected None.
B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive (AD) AD 2019-02-03 is related to Requirements Bulletin (RB) B787-81205-SB260007-00 RB. The effective date of AD 2019-02-03 is February 22, 2019.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
Accomplish the required actions, based on the applicable conditions in Table 4 and Table 5 in accordance with Accomplishment Instructions.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 3 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 4 Left Engine Fire Handle Detailed Inspection NotesRepeat Interval (Not to Exceed) Compliance Time ActionCondition -Within 45 days after the effective date of AD 2019-02-03 Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
ALL AIRPLANES 30 Days-Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
CONDITION 1: EN-
GINE FIRE HANDLE
MOVES TO THE EX-
TENDED POSITION B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 4 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 4 Left Engine Fire Handle Detailed Inspection NotesRepeat Interval (Not to Exceed) Compliance Time ActionCondition -Before further Flight OPTION 1 (ACTION 1): Replace Engine Fire Control Panel.
CONDITION 2: EN-
GINE FIRE HANDLE
DOES NOT MOVE TO
THE EXTENDED POSI- TION.
-Before further Flight OPTION 1 (ACTION 2): Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position, do corrective action(s) until the Engine Fire Handle moves to the extended position.
30 Days-OPTION 1 (ACTION 3): Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
-Before further Flight OPTION 2 (ACTION 1): Replace Engine Fire Shutoff Switch.
-Before further Flight OPTION 2 (ACTION 2): Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position, do corrective action(s) until the Engine Fire Handle moves to the extended position.
30 Days-OPTION 2 (ACTION 3): Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 5 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 5 Right Engine Fire Handle Detailed Inspection NotesRepeat Interval (Not to Exceed) Compliance Time ActionCondition -Within 45 days after the effective date of AD 2019-02-03 Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
ALL AIRPLANES 30 Days-Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
CONDITION 1: EN-
GINE FIRE HANDLE
MOVES TO THE EX-
TENDED POSITION B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 6 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 5 Right Engine Fire Handle Detailed Inspection NotesRepeat Interval (Not to Exceed) Compliance Time ActionCondition -Before further Flight OPTION 1 (ACTION 1): Replace Engine Fire Control Panel.
CONDITION 2: EN-
GINE FIRE HANDLE
DOES NOT MOVE TO
THE EXTENDED POSI- TION.
-Before further Flight OPTION 1 (ACTION 2): Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position, do corrective action(s) until the Engine Fire Handle moves to the extended position.
30 Days-OPTION 1 (ACTION 3): Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
-Before further Flight OPTION 2 (ACTION 1): Replace Engine Fire Shutoff Switch.
-Before further Flight OPTION 2 (ACTION 2): Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position, do corrective action(s) until the Engine Fire Handle moves to the extended position.
30 Days-OPTION 2 (ACTION 3): Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 7 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
In addition, the Manager of the FAA Seattle ACO Branch approves the action (i.e. inspection or modification) defined in this requirements bulletin as an alternative method of compliance to the requirements of paragraph
(g) of AD 2019-02-03. All provisions of AD 2019-02-03 that are not specifically referenced in the above statement remain fully applicable and must be complied with.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 8 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
5. A Detailed Inspection is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. This could include tactile assessment in which a component or assembly can be checked for tightness/security. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures ma be required.
6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
2. WORK INSTRUCTIONS A. Actions Required for Compliance B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 9 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 1 Left Engine Fire Handle Detailed Inspection NotesRefer to the listed procedures in SB Original Issue or later approved revisions as an accepted procedure.
Method of Compliance ActionCondition PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
ALL AIRPLANES PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
CONDITION 1:
ENGINE FIRE
HANDLE MOVES
TO THE EXTEND-
ED POSITION B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 10 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 1 Left Engine Fire Handle Detailed Inspection NotesRefer to the listed procedures in SB Original Issue or later approved revisions as an accepted procedure.
Method of Compliance ActionCondition PART 2: EN-
GINE FIRE
CONTROL
PANEL RE-
PLACEMENT -OPTION 1 (ACTION 1): Replace Engine Fire Control Panel.
CONDITION 2:
ENGINE FIRE
HANDLE DOES
NOT MOVE TO
THE EXTENDED POSITION. PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -OPTION 1 (ACTION 2): Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position, do corrective action(s) until the Engine Fire Handle moves to the extended position.
PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -OPTION 1 (ACTION 3): Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
PART 3: EN-
GINE FIRE
SHUTOFF
SWITCH RE-
PLACEMENT -OPTION 2 (ACTION 1): Replace Engine Fire Shutoff Switch.
PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -OPTION 2 (ACTION 2): Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position, do corrective action(s) until the Engine Fire Handle moves to the extended position.
PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -OPTION 2 (ACTION 3): Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 11 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019
REQUIREMENTS BULLETIN
Table 2 Right Engine Fire Handle Requirement NotesRefer to the listed procedures in SB Original Issue or later approved revisions as an accepted procedure.
Method of Compliance ActionCondition PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -Do a detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
ALL AIRPLANES PART 1: EN-
GINE FIRE
HANDLE DE-
TAILED IN-
SPECTION -Repeat detailed inspection of the Engine Fire handle for proper extension function by pressing and holding the Fire Control Panel manual override switch and pulling the Engine Fire Handle to the extended position.
CONDITION 1:
ENGINE FIRE
HANDLE MOVES
TO THE EXTEND-
ED POSITION B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019 Page 12 of 13 EXPORT CONTROLLED ECCN: 9E991 See title page for details.
B787-81205-SB260007-00 RB Issue 001, 22 Feb 2019