On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 13
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-7233; AD 2026-20-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fc7951f7ca3a9fdb4ad46d1c8647ee36744b7ff59dafb08942deb356b33f215d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fc7951f7ca3a9fdb4ad46d1c8647ee36744b7ff59dafb08942deb356b33f215d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SPECIAL ATTENTION Requirements Bulletin B787-81205-SB540022-00 RB NACELLES/PYLONS
- Pylon - Rolls Royce Trent 1000 Engine - Fan Cowl Replacement Copyright © 2026 The Boeing Company Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991 B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 1 of 13 Export Controlled ECCN: 9E991 See page 1 for details
5.0 B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected5
B. CONCURRENT REQUIREMENTS5
C. COMPLIANCE5
D. APPROVAL8
E. ACCOMPLISHMENT INSTRUCTIONS9
1. General Information9
2. Work Instructions ............................................ 1 0 B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 2 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 7-10, 12-16, 18, 22, 24, 31, 40-42, 47-48, 51, 56, 59, 61, 63, 66-69, 74, 78, 80, 83, 86-88, 97, 101-102, 107-108, 110- 114, 118, 120-121, 126, 128, 130, 132-133, 136, 140, 146-149, 153, 156, 161, 165-166, 169, 173, 177-179, 183, 185, 187, 190, 193, 195, 197, 199, 202-203, 205-206, 209-210, 213, 217-218, 226, 228, 234, 236, 239-240, 242-244, 246, 256, 259, 267, 272, 276, 279-280, 284, 287, 294-296, 299, 308-310, 313-316, 319, 322, 325, 327, 329, 331, 335, 337-338, 341, 345-347, 349-351, 357-358, 360-361, 367, 369-370, 373-375, 377, 382, 386, 392, 396-397, 399-401, 403-404, 406, 408, 414- 415, 418-419, 421, 424, 426, 428, 431, 433, 435-437, 442, 447, 450-451, 454-456, 460-462, 467- 468, 471-472, 474-476, 479, 481-482, 484, 487-488, 490-491, 493, 497, 504-505, 508-509, 513, 521, 524, 528, 532, 534-535, 538, 550, 552, 556-557, 559, 565, 568, 571, 573, 576, 581-584, 588- 590, 593, 599-600, 602-605, 607-609, 612, 616, 619, 621-625, 627, 629, 633, 636, 638-639, 645, 647, 651, 656, 658, 660, 662, 664-666, 671-675, 678, 680-682, 685-686, 688-689, 691, 693-695, 697-698, 700-701, 707-710, 714-715, 717, 719, 721, 732-733, 735, 739, 741, 749, 751, 755-756, 760, 762, 765, 769, 771-772, 794, 803-804, 809, 813, 816, 823, 827, 829, 834-839, 843-844, 846, 849, 851-853, 855-856, 861, 863, 869-870, 875, 877-878, 882, 884-885, 888, 896, 901, 904, 907, 914, 919-920, 922, 925, 928, 935, 938, 947, 952, 955-956, 968, 971, 973, 978, 982-985, 988, 992, 995, 997, 1000, 1003, 1006, 1011, 1015, 1023, 1026, 1028, 1033, 1036, 1039-1040, 1042, 1046- 1047, 1056, 1060, 1062, 1065, 1068, 1070, 1072, 1076, 1080, 1082-1083, 1085-1086, 1090, 1092, 1098, 1110, 1112, 1120, 1144, 1148, 1155, 1162-1163, 1166, 1169-1170, 1175, 1178-1179, 1182- 1183, 1185, 1187-1188, 1190, 1192-1197, 1199-1200, 1202, 1204-1205, 1209, 1213-1214 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below.
NOTE: Any Group 1, Configuration 2 airplanes modified to install a Rolls Royce Trent 1000 TEN Engines (Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000- H3, Trent 1000-J3, Trent 1000-K3) after the Issue 001 date of Requirements Bulletin B787-81205-SB540022-00 RB in accordance with Service Bulletin B787-81205-SB710023- 00 or Service Bulletin B787-81205-SB710024-00, must comply with Group 1, Configuration 1 requirements.
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 3 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8, 787-9, 787-10 airplanes equipped with Rolls Royce engines.-1 Airplanes equipped with Rolls Royce Trent 1000 TEN Engines (Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000 -K3) as of the Issue 001 date of Requirements Bulletin B787-81205-SB540022-00 RB.
1 Airplanes not equipped with Rolls Royce Trent 1000 TEN Engines (Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3) as of the Issue 001 date of Requirements Bulletin B787-81205-SB540022-00 RB.
2 Airplane Models: 787-10, 787-8, 787-9 Table 2 GroupVariable Number 1ZA100 - ZA105 1ZA116 - ZA124 1ZA135 - ZA144 1ZA270 - ZA277 1ZA445 - ZA459 1ZA506 - ZA516 1ZA536 - ZA545 1ZA576 - ZA580 1ZA588 - ZA593 1ZA650 - ZA652 1ZA665 - ZA677 1ZA778 - ZA779 1ZA839 1ZA842 1ZA853 - ZA864 1ZA881 - ZA888 1ZA949 - ZA950 1ZA958 - ZA959 1ZA963 - ZA966 1ZB001 - ZB012 GroupVariable Number 1ZB027 - ZB043 1ZB047 - ZB061 1ZB127 - ZB136 1ZB197 - ZB198 1ZB219 - ZB220 1ZB224 - ZB229 1ZB251 - ZB258 1ZB265 - ZB268 1ZB362 - ZB379 1ZB407 - ZB421 1ZB611 - ZB618 1ZB646 - ZB649 1ZB688 - ZB702 1ZB733 - ZB735 1ZB742 - ZB743 1ZB749 - ZB751 1ZB753 - ZB757 1ZB766 - ZB767 1ZB818 - ZB821 1ZB828 - ZB845 GroupVariable Number 1ZB858 - ZB863 1ZB874 - ZB876 1ZB890 1ZB990 - ZB991 1ZB997 1ZC001 - ZC026 1ZC101 - ZC112 1ZC116 - ZC118 1ZD001 - ZD008 1ZD038 1ZE003 - ZE010 1ZE013 - ZE014 1ZE016 - ZE019 1ZE075 1ZE085 - ZE086 1ZE090 - ZE091 1ZE095 - ZE098 1ZE100 1ZE115 1ZE150 B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 4 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZE195 - ZE198 1ZE270 - ZE273 1ZE310 - ZE314 1ZE375 GroupVariable Number 1ZE380 - ZE381 1ZE425 - ZE428 1ZE481 1ZE486 - ZE488 GroupVariable Number 1ZE506 - ZE520 1ZE586 -- --
2. Spares Affected Examine your spares supply for the parts or components identified below. If any parts or components are found, refer to Service Bulletin B787-81205-SB540022-00 Material Information for the recommended action.
Table 3 Part Number 725Z2300-307 725Z2300-305 725Z2300-5003 B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB540022-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB540022-00 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table 5, in accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 5 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1, Configuration 1:
Table 5 RIGHT ENGINE LEFT FAN COWL REPLACEMENT Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Whichever occurs later;OPTION 1: Do a maintenance records check of the right engine, left fan cowl for fan cowl part numbers 725Z2300-307, 725Z2300- 305, or 725Z2300-5003.*[1] All Airplanes
1. Within 4 years after the Issue 001 date of Requirements Bulletin B787-81205-SB540022- 00 RB.
2. Within 4 years after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness.
OPTION 2: Do an inspection of the right engine, left fan cowl for fan cowl part numbers 725Z2300-307, 725Z2300-305, or 725Z2300-5003.
--No further action required.CONDITION 1: FAN
COWL PART NUMBER 725Z2300-307, 725Z2300- 305, OR 725Z2300-5003 NOT FOUND.
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 6 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1, Configuration 1:
Table 5 RIGHT ENGINE LEFT FAN COWL REPLACEMENT Repeat Interval (Not to Exceed) Boeing Recommended Compliance Time ActionCondition -Whichever occurs later;OPTION 1: Replace the existing right engine left fan cowl with part number 725Z2300-5009, 725Z2300-701, or 725Z2300-309.
CONDITION 2: FAN
COWL PART NUMBER 725Z2300-307 FOUND.
1. Within 4 years after the Issue 001 date of Requirements Bulletin B787-81205-SB540022- 00 RB.
2. Within 4 years after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness.
OPTION 2: Change the existing right engine left fan cowl to part number 725Z2300-309.
OPTION 1: Replace the existing right engine left fan cowl with part number 725Z2300-5009, 725Z2300-701, or 725Z2300-309.
CONDITION 3: FAN
COWL PART NUMBER 725Z2300-305 FOUND.
OPTION 2: Change the existing right engine left fan cowl to part number 725Z2300-701.
OPTION 1: Replace the existing right engine left fan cowl with part number 725Z2300-5009, 725Z2300-701, or 725Z2300-309.
CONDITION 4: FAN
COWL PART NUMBER 725Z2300-5003 FOUND.
OPTION 2: Change the existing right engine left fan cowl to part number 725Z2300-5009.
*[1] A maintenance records check to determine installation of fan cowl part numbers 725Z2300-307, 725Z2300-305, or 725Z2300- 5003 can be done provided that the part number can be conclusively determined from that check. If the maintenance records check cannot conclusively determine the part number, an inspection of the right engine, left fan cowl to determine part number must be done.
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 7 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1, Configuration 2:
No compliance time given. However, any Group 1, Configuration 2 airplanes modified to install a Rolls Royce Trent 1000 TEN Engines (Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3) after the Issue 001 date of Requirements Bulletin B787-81205- SB540022-00 RB in accordance with Service Bulletin B787-81205-SB710023-00 or Service Bulletin B787- 81205-SB710024-00, must comply with Group 1, Configuration 1 requirements within the compliance times specified for Group 1, Configuration 1, or before further flight after modification, whichever occurs later.
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA) approved for all EASA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 8 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the Work Instructions is for reference only. The procedures in that column are not required by the AD and are for guidance only. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any Tasks identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified Tasks. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified Tasks, can still be done as specified, and the airplane can be put back in an airworthy condition. Tasks not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in Structural Repair Manual (SRM) Chapter 51 – Torque Values:
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 9 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
– Values for structural fasteners are given in 787 SRM Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable installation step.
6. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
8. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.
9. Use of colors in Tasks is based on guidance from the S1000D International specification for technical publications.
2. WORK INSTRUCTIONS A. Actions Required for Compliance
(1) Requirements B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 10 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1, Configuration 1:
Table 1 RIGHT ENGINE LEFT FAN COWL REPLACEMENT Refer to the listed procedures in SB B787-81205- SB540022-00 Issue 001 or later approved issues as an accepted procedure Method of ComplianceActionCondition PART 1: OPEN ACCESS-OPTION 1: Do a maintenance records check of the right engine, left fan cowl for fan cowl part numbers 725Z2300-307, 725Z2300- 305, or 725Z2300-5003.*[1] All Airplanes Task 1-OPTION 2: Do an inspection of the right engine, left fan cowl for fan cowl part numbers 725Z2300-307, 725Z2300-305, or 725Z2300-5003.
PART 3: CLOSE ACCESS-No further action required.CONDITION 1: FAN
COWL PART NUMBER 725Z2300-307, 725Z2300- 305, OR 725Z2300-5003 NOT FOUND.
PART 2: REPLACE FAN COWL -OPTION 1: Replace the existing right engine left fan cowl with part number 725Z2300-5009, 725Z2300-701, or 725Z2300-309.
CONDITION 2: FAN
COWL PART NUMBER 725Z2300-307 FOUND.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA- GRAPH 3.C.2) through
3.D.3), of Collins Aerospace Service Bulletin 787-R71-032 Revision 00, Dated August 07, 2025.
OPTION 2: Change the existing right engine left fan cowl to part number 725Z2300-309.
PART 3: CLOSE ACCESS- B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 11 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM
REQUIREMENTS BULLETIN
Group 1, Configuration 1:
Table 1 RIGHT ENGINE LEFT FAN COWL REPLACEMENT Refer to the listed procedures in SB B787-81205- SB540022-00 Issue 001 or later approved issues as an accepted procedure Method of ComplianceActionCondition PART 2: REPLACE FAN COWL -OPTION 1: Replace the existing right engine left fan cowl with part number 725Z2300-5009, 725Z2300-701, or 725Z2300-309.
CONDITION 3: FAN
COWL PART NUMBER 725Z2300-305 FOUND.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA- GRAPH 3.C.2) through
3.D.3), of Collins Aerospace Service Bulletin 787-R71-033 Revision 00, Dated January 08, 2026.
OPTION 2: Change the existing right engine left fan cowl to part number 725Z2300-701.
PART 3: CLOSE ACCESS- PART 2: REPLACE FAN COWL -OPTION 1: Replace the existing right engine left fan cowl with part number 725Z2300-5009, 725Z2300-701, or 725Z2300-309.
CONDITION 4: FAN
COWL PART NUMBER 725Z2300-5003 FOUND.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA- GRAPH 3.C.2) through
3.D.3), of Collins Aerospace Service Bulletin 787-R71-033 Revision 00, Dated January 08, 2026.
OPTION 2: Change the existing right engine left fan cowl to part number 725Z2300-5009.
PART 3: CLOSE ACCESS- *[1] A maintenance records check to determine installation of fan cowl part numbers 725Z2300-307, 725Z2300-305, or 725Z2300-50 03 can be done provided that the part number can be conclusively determined from that check. If the maintenance records check cannot conclusively determine the part number, an inspection of the right engine, left fan cowl to determine part number must be done.
B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM Page 12 of 13 Export Controlled ECCN: 9E991 See page 1 for details B787-81205-SB540022-00 RB Issue 001, 19 Feb 2026 12:00:00 AM