On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 12Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-1037; AD 2024-01-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5004f0a51e0555e562f7ff700e2fe02f99d83c9e627a6dac847258cda757a73a' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5004f0a51e0555e562f7ff700e2fe02f99d83c9e627a6dac847258cda757a73a' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALERT Alert Requirements Bulletin B787-81205-SB720007-00 RB ENGINE (TRENT 1000 ENGINES) - Interservices Fairings - Thrust Reverser Upper Splitter Fairing Assembly Change Copyright © 2022 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991 B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 1 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
5.0 B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Table of Contents Page
A. EFFECTIVITY3
1. Airplanes3
2. Spares Affected4
B. CONCURRENT REQUIREMENTS5
C. COMPLIANCE5
D. APPROVAL6
E. ACCOMPLISHMENT INSTRUCTIONS7
1. General Information7
2. Work Instructions8
TASK 1 – ENGINE - UPPER SPLITTER FAIRING ASSEMBLY - REPLACEMENT [Group 1]10
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 2 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 7-10, 12-16, 18, 22, 24, 31, 40-42, 47-48, 51, 56, 59, 61, 63, 66-69, 74, 78, 80, 83, 86-88, 97, 101-102, 107-108, 110- 114, 118, 120-121, 126, 128, 130, 132-133, 136, 140, 146-149, 153, 156, 161, 165-166, 169, 173, 177-179, 183, 185, 187, 190, 193, 195, 197, 199, 202-203, 205-206, 209-210, 213, 217-218, 226, 228, 234, 236, 239-240, 242-244, 246, 256, 259, 267, 272, 276, 279-280, 284, 287, 294-296, 299, 308-310, 313-316, 319, 322, 325, 327, 329, 331, 335, 337-338, 341, 345-347, 349-351, 357-358, 360-361, 367, 369-370, 373-375, 377, 382, 386, 392, 396-397, 399-401, 403-404, 406, 408, 414- 415, 418-419, 421, 424, 426, 428, 431, 433, 435-437, 442, 447, 450-451, 454-456, 460-462, 467- 468, 471-472, 474-476, 479, 481-482, 484, 487-488, 490-491, 493, 497, 504-505, 508-509, 513, 521, 524, 528, 532, 534-535, 538, 550, 552, 556-557, 559, 565, 568, 571, 573, 576, 581-584, 588- 590, 593, 599-600, 602-605, 607-609, 612, 616, 619, 621-625, 627, 629, 633, 636, 638-639, 645, 647, 651, 656, 658, 660, 662, 664-666, 671-675, 678, 680-682, 685-686, 688-689, 691, 693-695, 697-698, 700-701, 707-710, 714-715, 717, 719, 721, 732-733, 735, 739, 741, 749, 751, 755-756, 760, 762, 765, 769, 771-772, 794, 803-804, 809, 813, 816, 823, 827, 829, 834-839, 843-844, 846, 849, 851-853, 855-856, 861, 863, 869-870, 875, 877-878, 882, 884-885, 888, 896, 901, 904, 907, 914, 919-920, 922, 925, 928, 935, 938, 947, 952, 955-956, 968, 971, 973, 978, 982-985, 988, 992, 995, 997, 1000, 1003, 1006, 1011, 1015, 1023, 1026, 1028, 1033, 1036, 1039-1040, 1042, 1046- 1047, 1056, 1060, 1062, 1065, 1068, 1070, 1072, 1076, 1080, 1082-1083, 1085-1086, 1090, 1092, 1098, 1110, 1112, 1120, 1144, 1148 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below.
Table 1
DESCRIPTIONCONFIGURATIONGROUP 787-8, 787-9 and 787-10 airplanes with Rolls Royce Trent 1000 Engines.
-1 Airplane Models: 787-10, 787-8, 787-9 Table 2 B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 3 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
GroupVariable Number 1ZA100 - ZA105 1ZA116 - ZA124 1ZA135 - ZA144 1ZA270 - ZA277 1ZA445 - ZA459 1ZA506 - ZA516 1ZA536 - ZA545 1ZA576 - ZA580 1ZA588 - ZA593 1ZA650 - ZA652 1ZA665 - ZA677 1ZA778 - ZA779 1ZA839 1ZA842 1ZA853 - ZA863 1ZA881 - ZA888 1ZA949 - ZA950 1ZA958 - ZA959 1ZA963 - ZA966 1ZB001 - ZB012 1ZB027 - ZB043 1ZB047 - ZB061 1ZB127 - ZB136 GroupVariable Number 1ZB197 - ZB198 1ZB219 - ZB220 1ZB224 - ZB229 1ZB251 - ZB258 1ZB265 - ZB268 1ZB362 - ZB379 1ZB407 - ZB421 1ZB611 - ZB618 1ZB646 - ZB649 1ZB688 - ZB702 1ZB733 - ZB735 1ZB742 - ZB743 1ZB749 - ZB751 1ZB753 - ZB757 1ZB766 - ZB767 1ZB818 - ZB821 1ZB828 - ZB845 1ZB858 - ZB863 1ZB874 - ZB876 1ZB890 1ZB990 - ZB991 1ZB997 1ZC001 - ZC020 GroupVariable Number 1ZC101 - ZC107 1ZC116 - ZC118 1ZD001 - ZD008 1ZD038 1ZE003 - ZE010 1ZE013 - ZE014 1ZE016 - ZE019 1ZE075 1ZE085 - ZE086 1ZE090 - ZE091 1ZE095 - ZE096 1ZE100 1ZE115 1ZE150 1ZE195 - ZE198 1ZE270 - ZE273 1ZE310 - ZE314 1ZE375 1ZE380 - ZE381 1ZE425 - ZE428 1ZE481 1ZE486 - ZE488 1ZE586
2. Spares Affected Examine your spares supply for the parts identified below. If any parts are found, refer to Accomplishment Instructions - Step 2., Work Instructions for the recommended action.
Table 3 Part Numbers KH60375 B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 4 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
B. CONCURRENT REQUIREMENTS None.
C. COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2020-26-08 is related to this service bulletin.
The effective date of AD 2020-26-08 is January 27, 2021.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin B787-81205-SB720007-00 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin B787-81205-SB720007-00 RB mandatory.
Accomplish the required actions, based on the applicable conditions in Table 5, in accordance with Accomplishment Instructions.
The Conditions, Actions and Compliance times shown apply to each engine independently.
Table 5 Rolls Royce Trent 1000 Engine Upper Splitter Fairing Assembly Change Repeat Interval (Not to Exceed) Compliance TimeActionCondition -Within 7 years after the Issue 001 date of Requirements Bulletin B787- 81205-SB720007-00 RB or within 7 years after the date of issuance of the original standard certificate of airworthiness or the original export certificate of airworthiness, whichever occurs later.
Remove Rolls Royce Engine upper splitter fairing assembly and replace with new upper splitter fairing assembly with ramp fairing incorporated.
All Airplanes Do a General Visual Inspection (GVI) of the left and right Thrust Reverser (TR) Inner Fixed Structure (IFS) forward upper fire seal and thermal blanket for any damage.
--No further action.CONDITION 1: NO DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL AND NO DAMAGE
FOUND ON THERMAL
BLANKET -Before further flight.Replace IFS forward fire seal.
CONDITION 2: ANY IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND -Before further flight.Replace thermal blankets.CONDITION 3: ANY
THERMAL BLANKET
DAMAGE FOUND B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 5 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
D. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.
In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the inspection and upper splitter fairing assembly replacement defined in this bulletin issue on an affected engine as an alternative method of compliance and the termination of the repetitive General Visual Inspection (GVI) of the IFS forward upper fire seal and thermal blanket inspection required by paragraph (g) of AD 2020-26-08 for that modified engine. All provisions of AD 2020-26-08 that are not specifically referenced in the above statement remain fully applicable and must be complied with accordingly.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 6 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
E. ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC End to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures. For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in work instructions are in Compliance.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51 – Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring Practices Manual (SWPM).
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 7 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable installation step.
6. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.
7. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.
8. The CONDITIONS, and ACTIONS shown apply to each affected engine independently.
9. Inner Fixed Structure (IFS) forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
10. IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-temperature conditions shown by discoloration or scorching.
2. WORK INSTRUCTIONS A. Actions Required for Compliance
(1) Requirements Table 1 Rolls Royce Trent 1000 Engine Upper Splitter Fairing Assembly Change Refer to the listed procedures in SB B787-81205- SB720007-00 Issue 001 or later approved issues as an accepted procedure Method of ComplianceActionCondition PART 1 - OPEN ACCESS-Remove Rolls Royce Engine upper splitter fairing assembly and replace with new upper splitter fairing assembly with ramp fairing incorporated.
All Airplanes -Task 1 PART 2 - IFS FORWARD
UPPER FIRE SEAL AND
THERMAL BLANKET IN-
SPECTION -Do a General Visual Inspection (GVI) of the left and right Thrust Reverser (TR) Inner Fixed Structure (IFS) forward upper fire seal and thermal blanket for any damage.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 8 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Table 1 Rolls Royce Trent 1000 Engine Upper Splitter Fairing Assembly Change Refer to the listed procedures in SB B787-81205- SB720007-00 Issue 001 or later approved issues as an accepted procedure Method of ComplianceActionCondition --No further action.CONDITION 1: NO DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL AND NO DAMAGE
FOUND ON THERMAL
BLANKET PART 3 - IFS FORWARD
UPPER FIRE SEAL RE-
PLACEMENT -Replace IFS forward fire seal.
CONDITION 2: ANY IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND PART 4 - THERMAL
BLANKET REPLACE- MENT -Replace thermal blankets.CONDITION 3: ANY
THERMAL BLANKET
DAMAGE FOUND PART 5 - CLOSE AC- CESS - B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 9 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
Task 1 – ENGINE - UPPER SPLITTER FAIRING ASSEMBLY - REPLACEMENT [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
Procedure This Task applies only to: Group 1.
ENGINE - UPPER SPLITTER FAIRING ASSEMBLY - REPLACEMENT B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 10 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
A BOEING B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM
REQUIREMENTS BULLETIN
UPPER SPLITTER FAIRING ASSEMBLY (TYPICAL) 3004959 ICN-B787-A-000061-A-81205-18611-A-01-1 Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY numbers shown below are the number of parts necessary for each Engine.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 11 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
Table 1 More DataQtyIdentificationNameActionStep *[1]1-UPPER SPLITTER
FAIRING ASSEMBLY Remove1 *[1]1-UPPER SPLITTER
FAIRING ASSEMBLY Install (New)2 *[1] Replace existing Upper Splitter Fairing Assembly with new Upper Splitter Fairing Assembly in accordance with Rolls Royce Service Bulletin TRENT 1000 72-AK759, Initial Issue, dated Jul. 28/22.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM Page 12 of 12 EXPORT CONTROLLED ECCN: 9E991 See page 1 for details.
B787-81205-SB720007-00 RB Issue 001, 12 Dec 2022 12:00:00 AM