Copy · U.S. DOT/FAA - SB-DC8-53A080-02 · 86 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0235; AD 2014-22-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'a3763420a40cc7cb3ff4762b1824a1e545fdda0d472971838c569e764e17428d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 37–48

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition AND 5,000 flight cycles .30,000 flight cycles from full length repair with finger doublers installation Do an external visual inspections for cracks along all four edges of the external doublers, left and right sides.

(a) (c) OR Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 49 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition 2,000 flight cycles .2,000 flight cyclesDo a general visual and Eddy Current High Frequency (ETHF) Inspection of the accessible fuselage skin and fasteners at longeron 28 forward of flat aft pressure bulkhead, left and right sides Option 2

(a) (b) AND .2 years from initial inspection of accessible skin .Remove previously installed local repairs and replace them with new local repairs.

AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For new local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For new skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND .6 years from the issue date of Revision 1 of this service bulletin Accumulation of 45,400 total flight cycles Remove previously installed local repairs and install full length improvement modification.

AND 10,000 flight cycles .15,000 flight cycles from full length repair installation Do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) OR Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 50 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition .Before further flightRemove previously installed local repairs and install full length repair with finger doublers.

Option 3 AND 5,000 flight cycles .30,000 flight cycles from full length repair with finger doublers installation Do an external visual inspections for cracks along all four edges of the external doublers, left and right sides.

(a) (c) OR Before further flightRemove previously installed local repairs and install full length improvement modification.

Option 4 AND 10,000 flight cycles 15,000 flight cycles from installation of repair Do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 51 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition ..Before further flightReplace all Failed FastenersCondition 2 Any Failed Fastener(s) AND 2,000 flight cycles .2,000 flight cyclesDo a general visual and Eddy Current High Frequency (ETHF) Inspection of the accessible fuselage skin and fasteners at longeron 28 forward of flat aft pressure bulkhead, left and right sides Option 1

(a) (b) AND ..2 years from initial inspection of accessible skin Remove previously installed local repairs and replace them with new local repairs.

AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For new local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For new local skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND 6 years from the issue date of Revision 1 of this service bulletin Accumulation of 45,400 total flight cycles Remove previously installed local repairs and install full length repair with finger doublers.

AND 5,000 flight cycles .30,000 flight cycles from full length repair with finger doublers installation Do an external visual inspections for cracks along all four edges of the external doublers, left and right sides.

(a) (c) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 52 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition OR ..Before further flightReplace all Failed FastenersOption 2 AND 2,000 flight cycles .2,000 flight cyclesDo a general visual and Eddy Current High Frequency (ETHF) Inspection of the accessible fuselage skin and fasteners at longeron 28 forward of flat aft pressure bulkhead, left and right sides

(a) (b) AND ..2 years from initial inspection of accessible skin Remove previously installed local repairs and replace them with new local repairs.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 53 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For new local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For new local skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND 6 years from the issue date of Revision 1 of this service bulletin Accumulation of 45,400 total flight cycles Remove previously installed local repairs and install full length repair.

AND 10,000 flight cycles .15,000 flight cycles from full length repair installation Do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) OR ..Before further flightRemove previously installed local repairs and install full length repair with finger doubler Option 3 AND 5,000 flight cycles .30,000 flight cycles from full length repair with finger doublers installation Do an external visual inspections for cracks along all four edges of the external doublers, left and right sides.

(a) (c) OR Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 54 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition ..Before further flightRemove previously installed local repairs and install full length repair Option 4 AND 10,000 flight cycles .15,000 flight cycles from full length repair installation Do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 55 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition ..Before further flightDo local skin repair.Condition 3 Any Crack(s) Found in Skin AND 2,000 flight cycles .2,000 flight cyclesDo a general visual and Eddy Current High Frequency (ETHF) Inspection of the accessible fuselage skin and fasteners at longeron 28 forward of flat aft pressure bulkhead, left and right sides Option 1

(a) (b) AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND ..2 years from initial inspection of accessible skin Remove previously installed local repairs and replace them with new local repairs AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 56 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND .6 years from the issue date of Revision 1 of this service bulletin Accumulation of 45,400 total flight cycles Remove previously installed local repairs and install full length repair with finger doubler AND 5,000 flight cycles .30,000 flight cycles from full length repair with finger doublers installation Do an external visual inspections for cracks along all four edges of the external doublers, left and right sides.

(a) (c) OR Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 57 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition ..Before further flightDo local skin repair.Option 2 AND 2,000 flight cycles .2,000 flight cyclesDo a general visual and Eddy Current High Frequency (ETHF) Inspection of the accessible fuselage skin and fasteners at longeron 28 forward of flat aft pressure bulkhead, left and right sides

(a) (b) AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND ..2 years from initial inspection of accessible skin Remove previously installed local repairs and replace them with new local repairs AND 5,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For local skin repairs 12 inches or less long, do an external visual inspections for cracks along all four edges of the external doublers

(a) (c) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 58 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition AND/OR 10,000 flight cycles from initial inspection .15,000 flight cycles from installation of repair For skin repairs longer than 12 inches, do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler

(a) (c) AND .6 years from the issue date of Revision 1 of this service bulletin Accumulation of 45,400 total flight cycles Remove previously installed local repairs and install full length repair AND 10,000 flight cycles .15,000 flight cycles from full length repair installation Do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler.

(a) (c) OR ..Before further flightRemove previously installed local repairs and install full length repair with finger doubler Option 3 AND 5,000 flight cycles .30,000 flight cycles from full length repair with finger doublers installation Do an external visual inspections for cracks along all four edges of the external doublers, left and right sides.

(a) (c) OR ..Before further flightRemove previously installed local repairs and install full length repair Option 4 AND 10,000 flight cycles .15,000 flight cycles from full length repair installation Do a Low Frequency Eddy Current inspection of the fuselage skin along all four edges of the external doubler.

(a) (c) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 59 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Table 4 Airplanes with flat aft pressure bulkhead having 24,000 or more total flight cycles as of the original issue date of this service bulletin and having skin repairs in the area of inspection:

Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition

(a) Repeat inspection at noted interval if no discrepancies are found.

(b) If any discrepancy is found, do the work of Condition 2 or 3 as applicable before further flight.

(c) If any discrepancy is found, contact Boeing and do the work required before further flight.

F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.

In addition, the Manager of the FAA Los Angeles Aircraft Certification Office approves the action (i.e.

inspection or modification) defined in this service bulletin as an alternative method of compliance to the requirements of paragraphs (f), (g), (h), (i), and (j) of AD 2008-06-23. All provisions of AD 2008-06-23 that are not specifically referenced in the above statement remain fully applicable and must be complied with.

G. Manpower The table below shows an estimate of the task hours necessary to do this inspection for each airplane.

This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time. These are some examples of lost time:

 Time to adjust to the workplace  Time to schedule the work  Time to inspect the work  Time to cure the materials  Time to make the parts  Time to find the tools.

NOTE: Task hour tables are listed for each inspection method, Operator to determine which inspection process will be used.

Elapsed HoursTask HoursNumber of PersonsTask

0.50.51Open Access

1.02.02Inspection Method 101

0.50.51Close Access Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: June 22, 2004 DC8-53A080Revision 2: September 18, 2013 60 of 86 BOEING SERVICE BULLETIN DC8-53A080

ALERTALERT

Pages 61–72 of 86