TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '82a23402acf524de11a53b4d6cff0cb5a0201814bf34a8fb51aa29ef0cbc509d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '82a23402acf524de11a53b4d6cff0cb5a0201814bf34a8fb51aa29ef0cbc509d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Group 2:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-33J060165-526-Lower
(b) Do Eddy Current Low Frequency (ETLF) and Ultrasonic (UT) inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
(2) Install retained inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
(3) Install door number 520DT on the left wing main tank and door number 620ET on the right wing main tank and attaching parts. Refer to MD-90 AMM 06-35-00, MD-90 AMM 06-36-00 for location and MD-90 AMM 28-00-00 as an accepted procedure.
NOTE: In addition to monitoring the fuel tank access doors for leaks during the installation, monitor all areas of the rear spar changed during the accomplishment of this service bulletin for fuel leaks. No fuel leaks are allowed in the changed areas.
(4) Install previously removed aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides.
Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
(5) Go to work step 3.B.9.
Condition 2b: Crack 2.0 Inches or Shorter in Rear Spar Upper Cap
(1) Do Option 1 or Option 2.
NOTE: Operators can do Option 1 or Option 2 or any combination of Options 1 and 2.
Option 1
(a) Do doubler repair to rear spar upper and lower caps in accordance with Service Rework Drawing J060271 using the applicable service kit as follows:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-11-J060271-519Upper and Lower SA90570026-13J060271-520-Upper and Lower
(b) Do repeat ETHF inspections of rear spar lower cap repair in accordance with Service Sketch 3668XXX Revision C at intervals defined in Paragraph 1.E., Compliance.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 49 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
Option 2
(a) Do splice repair to rear spar upper and lower caps in accordance with Service Rework Drawing J060165 using the applicable service kit as follows:
Group 1:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-23-J060165-521Upper and Lower SA90570026-25J060165-522-Upper and Lower Group 2:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-35-J060165-527Upper and Lower SA90570026-37J060165-528-Upper and Lower
(b) Do ETLF and UT inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
(2) Install retained inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
(3) Install door number 520DT on the left wing main tank and door number 620ET on the right wing main tank and attaching parts. Refer to MD-90 AMM 06-35-00, MD-90 AMM 06-36-00 for location and MD-90 AMM 28-00-00 as an accepted procedure.
NOTE: In addition to monitoring the fuel tank access doors for leaks during the installation, monitor all areas of the rear spar changed during the accomplishment of this service bulletin for fuel leaks. No fuel leaks are allowed in the changed areas.
(4) Install previously removed aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides.
Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
(5) Go to work step 3.B.9.
Condition 2c: Crack Longer than 2.0 Inches in Rear Spar Upper Cap
(1) Do Option 1 or Option 2
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 50 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
Option 1
(a) Do doubler repair to rear spar lower cap in accordance with Service Rework Drawing J060271 and splice repair to rear spar upper cap in accordance with Service Rework Drawing J060165. using the applicable service kit as follows:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-7-J060271-517Lower SA90570026-9J060271-518-Lower SA90570026-15-J060165-517Upper SA90570026-17J060165-518-Upper Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-7-J060271-517Lower SA90570026-9J060271-518-Lower SA90570026-27-J060165-523Upper SA90570026-29J060165-524-Upper
(b) Do repeat ETHF inspections of rear spar lower cap doubler repair in accordance with Service Sketch 3668XXX Revision C at intervals defined in Paragraph 1.E., Compliance.
Option 2
(a) Do splice repair to rear spar upper and lower caps in accordance with Service Rework Drawing J060165 using the applicable service kit as follows:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-23-J060165-521Upper and Lower SA90570026-25J060165-522-Upper and Lower Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-33-J060165-527Upper and Lower
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 51 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-35J060165-528-Upper and Lower
(b) Do ETLF and UT inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
(2) Install retained inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
(3) Install door number 520DT on the left wing main tank and door number 620ET on the right wing main tank and attaching parts. Refer to MD-90 AMM 06-35-00, MD-90 AMM 06-36-00 for location and MD-90 AMM 28-00-00 as an accepted procedure.
NOTE: In addition to monitoring the fuel tank access doors for leaks during the installation, monitor all areas of the rear spar changed during the accomplishment of this service bulletin for fuel leaks. No fuel leaks are allowed in the changed areas.
(4) Install previously removed aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides.
Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
(5) Go to work step 3.B.9.
CONDITION 3: CRACK LONGER THAN 2.0 INCHES OR CRACK IN THE REAR SPAR LOWER
CAP FORWARD HORIZONTAL LEG RADIUS
a. Disconnect aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides. Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
NOTE: Only cables which run through the lightening hole of flap hinge fitting at station Xrs=164.000 need to be disconnected.
b. Defuel and purge left and right fuel tanks if/as required. Refer to MD-90 AMM 12-11-01, MD-90 AMM 28-00-00 and MD-90 AMM 28-11-00 as accepted procedures.
c. Remove and retain door number 520DT on the left wing main tank and/or door number 620CT on the right wing main tank and attaching parts as required. Refer to MD-90 AMM 06-35-00 and MD-90 AMM 06-36-00.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 52 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
d. Prepare fuel tanks for entry and gain access to fuel tanks as required to reach attachments in vicinity of wing flap inboard hinge fitting.
e. Remove and retain the inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
f. Do Eddy Current High Frequency (ETHF) inspection on the aft side of the left and/or right wing rear spar upper cap at station Xrs=164.000 for cracks in accordance with Figure 1 and Service Rework Drawing J060271, General Note 29, and based on inspection results, do as follows:
Condition 3a: No Crack in Rear Spar Upper Cap
(1) Do splice repair to rear spar lower cap in accordance with Service Rework Drawing J060165 using the applicable service kit as follows:
Group 1:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-19-J060165-519Lower SA90570026-21J060165-520-Lower Group 2:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-31-J060165-525Lower SA90570026-33J060165-526-Lower
(2) Do ETLF and UT inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
(3) Install retained inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
(4) Install door number 520DT on the left wing main tank and door number 620ET on the right wing main tank and attaching parts. Refer to MD-90 AMM 06-35-00, MD-90 AMM 06-36-00 for location and MD-90 AMM 28-00-00 as an accepted procedure.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 53 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
NOTE: In addition to monitoring the fuel tank access doors for leaks during the installation, monitor all areas of the rear spar changed during the accomplishment of this service bulletin for fuel leaks. No fuel leaks are allowed in the changed areas.
(5) Install previously removed aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides.
Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
(6) Go to work step 3.B.9.
Condition 3b: Crack 2.0 Inches or Shorter in Rear Spar Upper Cap
(1) Do Option 1 or Option 2 Option 1
(a) Do doubler repair to rear spar upper cap in accordance with Service Rework Drawing J060271 and splice repair to rear spar lower cap in accordance with Service Rework Drawing J060165. using the applicable service kit as follows:
Group 1:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-3-J060271-511Upper SA90570026-5J060271-512-Upper SA90570026-19-J060165-519Lower SA90570026-21J060165-520-Lower Group 2:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-3-J060271-511Upper SA90570026-5J060271-512-Upper SA90570026-31-J060165-525Lower SA90570026-33J060165-526-Lower
(b) Do ETHF inspections of rear spar upper cap doubler repair in accordance with Service Sketch 3668XXX Revision C at intervals defined in Paragraph 1.E., Compliance.
(c) Do ETLF and UT inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 54 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
Option 2
(a) Do splice repair to rear spar upper and lower cap in accordance with Service Rework Drawing J060165, using the applicable service kit as follows:
Group 1:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-23-J060165-521Upper and Lower SA90570026-25J060165-522-Upper and Lower Group 2:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-35-J060165-527Upper and Lower SA90570026-37J060165-528-Upper and Lower
(b) Do ETLF and UT inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
(2) Install retained inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
(3) Install door number 520DT on the left wing main tank and door number 620ET on the right wing main tank and attaching parts. Refer to MD-90 AMM 06-35-00, MD-90 AMM 06-36-00 for location and MD-90 AMM 28-00-00 as an accepted procedure.
NOTE: In addition to monitoring the fuel tank access doors for leaks during the installation, monitor all areas of the rear spar changed during the accomplishment of this service bulletin for fuel leaks. No fuel leaks are allowed in the changed areas.
(4) Install previously removed aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides.
Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
(5) Go to work step 3.B.9.
Condition 3c: Crack Longer than 2.0 Inches in Rear Spar Upper Cap
(1) Do splice repair to rear spar upper and lower caps in accordance with Service Rework Drawing J060165, using the applicable service kit as follows:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 55 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
Group 1:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-23-J060165-521Upper and Lower SA90570026-25J060165-522-Upper and Lower Group 2:
Service KitConfigurationRear Spar Cap Repair Right WingLeft Wing SA90570026-35-J060165-527Upper and Lower SA90570026-37J060165-528-Upper and Lower
(2) Do ETLF and UT inspections of rear spar lower cap splice repair in accordance with Service NDI Drawing SN90570001 on forward side and SN90570006 on aft side at intervals defined in Paragraph 1.E., Compliance.
(3) Install retained inboard hinge fitting for the left and/or right wing outboard flap and attaching parts (including any shims) at station Xrs=164.000. Refer to MD-90 AMM 57-40-01 as an accepted procedure.
(4) Install door number 520DT on the left wing main tank and door number 620ET on the right wing main tank and attaching parts. Refer to MD-90 AMM 06-35-00, MD-90 AMM 06-36-00 for location and MD-90 AMM 28-00-00 as an accepted procedure.
NOTE: In addition to monitoring the fuel tank access doors for leaks during the installation, monitor all areas of the rear spar changed during the accomplishment of this service bulletin for fuel leaks. No fuel leaks are allowed in the repaired areas.
(5) Install previously removed aileron control, aileron trim, aileron bus, and outboard spoiler mechanical cables at nearest turnbuckles to station Xrs=164.000, left and right sides.
Refer to MD-90 AMM 27-10-00 and MD-90 AMM 27-60-00 as accepted procedures.
(6) Go to work step 3.B.9.
9. Close inboard and center Bent Up Trailing Edge (BUTE) doors. Refer to MD-90 AMM 57-20-03 as an accepted procedure.
10. If removed, install kept fixed flap fairing(s) using retained attaching parts.
11.
12. Remove door keepers and close main landing gear doors. Refer to MD-90 AMM 32-10-00 as an accepted procedure.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 56 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
13. Pressurize left and right hydraulic systems. Refer to MD-90 AMM 29-00-00 as an accepted procedure.
14. Retract wing flaps to full up position. Refer to MD-90 AMM 27-50-00 as an accepted procedure.
15. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1: February 23, 2011 57 of 59 BOEING SERVICE BULLETIN MD90-57A026
ALERTALERT
BOEING SERVICE BULLETIN MD90-57A026
ALERT ALERT
STATION Xrs=164.000 SCAN
DIRECTION SCAN
DIRECTION
REAR SPAR
LOOKING FORWARD LEFT SIDE SHOWN 1901593 FIGURE 1: WING REAR SPAR LOWER CAP - LEFT AND RIGHT - EDDY CURRENT TESTING HIGH
FREQUENCY INSPECTION (SHEET 1 OF 2) Original Issue: February 11, 2010 Revision 1 February 23, 2011 MD90-57A026
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 58 of 59
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)15911301-XXXLower Rear Spar CapInspect (Scan 1) Eddy Current Testing High Frequency (ETHF) 1
(a) (b)15911300-XXXUpper Rear Spar CapInspect (Scan 2) Eddy Current Testing High Frequency (ETHF) 2 Note: Inspection not required when Lower Rear Spar Cap has no crack.
(a) Use calibration scan method "R" and calibrate the N2 notch using DAC GSET AL.01 in accordance with NDTSPM 06-10-01.001 , Procedure 1. Scan wing rear spar upper and lower caps with method
45.
(b) The -XXX represents the different dash numbered spar caps that may exist on the airplane.
FIGURE 1: WING REAR SPAR LOWER CAP - LEFT AND RIGHT - EDDY CURRENT TESTING HIGH
FREQUENCY INSPECTION (SHEET 2 OF 2)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 11, 2010 MD90-57A026Revision 1 February 23, 2011 59 of 59 BOEING SERVICE BULLETIN MD90-57A026