Copy · U.S. DOT/FAA - Service Bulletin · 136 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0183; AD 2013-02-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '0f2a10218ae21547ced99fccbf0abc690d2644d8b643663c7e3b98e056875c5f'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-25-1641 Original Issue: May 13, 2011 Revision 1: August 08, 2011 ATA System: 2524 SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments - Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2011 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 1 of 136

5.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 2 of 136 BOEING SERVICE BULLETIN 737-25-1641

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary7

1. PLANNING INFORMATION ........................................ 1 1 A. Effectivity ............................................... 1 1

1. Airplanes ............................................ 1 1

2. Spares Affected ........................................ 1 9 B. Concurrent Requirements ...................................... 1 9 C. Reason ................................................ 1 9 D. Description .............................................. 2 0 E. Compliance .............................................. 2 1 F. Approval ............................................... 2 2 G. Manpower .............................................. 2 2 H. Weight and Balance Changes .................................... 2 5 I. Electrical Load Data ......................................... 2 6 J. References .............................................. 2 6

1. Existing Data .......................................... 2 6

2. Data supplied with this Service Bulletin ............................ 2 7

3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 7 K. Publications Affected ........................................ 2 7 L. Interchangeability and Intermixability of Parts ........................... 2 8

2. MATERIAL INFORMATION ........................................ 2 9 A. Material - Price and Availability ................................... 2 9 B. Industry Support Information .................................... 3 1 C. Parts Necessary For Each Airplane ................................. 3 1

1. Kits/Parts ............................................ 3 1

2. Parts and Materials Supplied by the Operator ........................ 3 5

3. Parts Modified and Reidentified ................................ 3 6

4. Parts Removed and Not Replaced .............................. 3 7 D. Parts Necessary to Change Spares ................................. 3 7 E. Special Tooling - Price and Availability ............................... 3 8 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 8

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9 A. GENERAL INFORMATION ..................................... 3 9 B. WORK INSTRUCTIONS ....................................... 4 0 FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS

- CHANGE ........................................... 4 4 FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS

- CHANGE ........................................... 5 5 FIGURE 3: PASSENGER CABIN - MID 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS - CHANGE .................................................. 6 6 FIGURE 4: PASSENGER CABIN - MID 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS - CHANGE .................................................. 7 7 FIGURE 5: PASSENGER CABIN - AFT CENTER OVERHEAD STOWAGE BOX, FIBERGLASS - CHANGE .................................................. 8 8 FIGURE 6: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, CARBON - CHANGE ........................................... 1 0 3

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 3 of 136 BOEING SERVICE BULLETIN 737-25-1641

FIGURE 7: PASSENGER CABIN - MID 1 CENTER OVERHEAD STOWAGE BOX, CARBON - CHANGE ................................................. 1 1 4 FIGURE 8: PASSENGER CABIN - MID 2 CENTER OVERHEAD STOWAGE BOX, CARBON - CHANGE ................................................. 1 2 5 APPENDIX A: BOEING PRODUCT STANDARD BAC5583, REV G., PROCESS FOR POTTING INSERTS AND EDGES INTO SANDWICH PANELS .......................... 1 3 6

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 4 of 136 BOEING SERVICE BULLETIN 737-25-1641

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 737-25-1641Original Issue: May 13, 2011 Revision 1: August 08, 2011 ATA System: 2524 SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments - Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION No more work is necessary on the airplane(s) changed in accordance with the original issue of this service bulletin.

REASON FOR REVISION As a part of a service bulletin validation program, this change was completed on airplane YL113 by Service Bulletin 737-25-1641 Original Issue. The change completed on airplane YL113 by Service Bulletin Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane YL113 has the configuration of a Group 1 airplane.

Revision 1 is sent to add details to the Accomplishment Instructions to secure turnbuckles, add washer to Figure 1-8, add potted insert hole sizes, and part mark instructions to Figures 1-8, and add Appendix A for accepted potted insert procedures.

These sections were changed:

1. Summary, Concurrent Requirements, added concurrent requirements data.

2. Paragraph 1. B., Concurrent Requirements, added service bulletins.

3. Paragraph 1.J. 1., References, added Boeing Product Standard BAC5583 Processes For Potting Inserts and Edges Into Sandwich Panels and added service bulletins to Existing Data.

4. Paragraph 2.C.1., Material Information, Parts Necessary for each airplane. Deleted qty (2) BACN10YR4CD Nut and added qty (2) BACN10YR3CD Nut to Kit 002A0002-242.

5. Paragraph 3. Accomplishment Instructions, B., Work Instructions:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 5 of 136

a. Work Packages 1-8, Step 1, Added note to secure tie rod turnbuckle. Step 3, added note to remove any material used to secure tie rod turnbuckle.

b. Figure 2, Step 7 and 14, Deleted qty (1) BACB30NR4K6 and added qty (1) BACB30NM3K6 Bolt, Hex Head. Deleted qty (1) BACN10YR4CD and added qty (1) BACN10YR3CD Nut.

c. Figure 1-8 added hole sizes and references for potted insert installation procedure.

d. Figure 1-8 added instruction to apply the date to part mark instructions and added that is acceptable to use adhesive backed decal.

e. Figure 1-8 added washer to Figures.

f. Figure 1-4, and Figure 6-8, footnote (d) deleted reference to CMM 25-00-66 and added BMS 5-28.

Figure 5, footnote (h) deleted reference to CMM 25-00-66 and added reference to BMS 5-28.

6. Added Appendix A, Process For Potting Inserts and Edges Into Sandwich Panels.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY May 13, 2011Original Issue:

August 08, 2011Revision 1:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 6 of 136 BOEING SERVICE BULLETIN 737-25-1641

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 737-25-1641Original Issue: May 13, 2011 Revision 1: August 08, 2011 ATA System: 2524 SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments - Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS Refer to Paragraph 1.B., Concurrent Requirements.

BACKGROUND The current design of the 737NG Center Overhead Stowage (COS) boxes do not meet the 9G Forward Load Requirement. The COS boxes that have been delivered need to be changed into a design that meets the 9G requirement. If this service bulletin is not accomplished, injury to passengers and flight personnel could occur as a result of being struck by falling objects.

During an emergency landing condition the Center Overhead Stowage, (COS) box attachments must satisfactorily go through a 9G forward acceleration at the maximum weight load to agree with FAR 25.561 specifications.

During an emergency landing, this condition could cause the center overhead stowage box compartments to fall from their supports. The changes given in this service bulletin will provide the full 9G forward force resistance for all Center Overhead Stowage boxes.

Boeing Service Related Problem (SRP) 737-SRP-25-0294 is related to this service bulletin.

Boeing Fleet Team Digest (FTD) 737NG FTD 25-10004 is related to this service bulletin.

As a part of a service bulletin validation program, this change was completed on airplane YL113 by Service Bulletin 737-25-1641 Original Issue. The change completed on airplane YL113 by Service Bulletin Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane YL113 has the configuration of a Group 1 airplane.

ACTION (PRR 38275-169S) For each Center Overhead Stowage box location, remove the Center Overhead Stowage box and accomplish the specified changes and reinstall the Center Overhead Stowage box.

NOTE: For Group 1 Airplanes: This service bulletin is applicable to Group 1 airplanes with one or more center overhead stowage boxes with liferaft provisions installed prior to delivery.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 7 of 136

For Group 2 Airplanes: This service bulletin is applicable only to Group 2 airplanes if the changes given in Service Bulletin 737-25-1585 with Master change 2528MK3691, 2528MK3712 were made.

For Group 3 Airplanes: This service bulletin is applicable only to Group 3 airplanes if the changes given in Service Bulletin 737-25-1586 with Master change 2528MK3692 were made.

For Group 4 Airplanes: This service bulletin is applicable only to Group 4 airplanes if the changes given in Service Bulletin 737-25-1433 with Master change 2528MK3375 were made.

For Group 5 Airplanes: This service bulletin is applicable only to Group 5 airplanes if the changes given in Service Bulletin 737-25-1628 with Master change 2528MK3728 were made.

EFFECTIVITY 737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).

COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Boeing recommends that the modification given in this service bulletin be done within 60 months after the original issue date of this service bulletin.

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for airplanes in warranty as of February 15, 2010. Please refer to Paragraph 2.B., Industry Support Information.

MANPOWER Refer to Paragraph 1.G., Manpower.

MATERIAL INFORMATION Boeing Supplied Kits/Parts/ and Operator Supplied Parts.

Refer to Paragraph 2.A., Material - Price and Availability.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 8 of 136 BOEING SERVICE BULLETIN 737-25-1641

Page 9OCROpen in PDF

BOEING SERVICE BULLETIN 737-25-1641

REMOVE, MODIFY AND INSTALL THE CENTER OVERHEAD STOWAGE BOX. PERFORM MODIFICATION

OF THE CENTER OVERHEAD STOWAGE BOX TO INSTALL

REINFORCEMENT HARDWARE AT EACH CORNER, RIGHT AND LEFT, AT THE 9G TIE ROD ATTACHMENT.

2032139 Original Issue: May 13, 2011 Revision 1: August 08, 2011 BOEING PROPRIETARY - 737-25-1641 Copyright © Unpublished Work - See page 1 for details. 9 of 136

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 10 of 136 BOEING SERVICE BULLETIN 737-25-1641

BLANK PAGE

Commercial Airplanes 737 Service Bulletin

SPECIAL ATTENTION Number: 737-25-1641 Original Issue: May 13, 2011 Revision 1: August 08, 2011 ATA System: 2524 SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments - Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

1. PLANNING INFORMATION A. Effectivity

1. Airplanes This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent production airplanes. Refer to PRR 38275-169S for data about this change.

Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.

DESCRIPTIONCONFIGURATIONGROUP 737-600/700/700C/800/900/900ER Airplanes with one or more center overhead stowage boxes installed at Boeing prior to delivery -1 737-700 Airplanes that have been changed as described in Master Change 2528MK3691, 2528MK3712 -2 737-900 Airplanes that have been changed as described in Master Change 2528MK3692 -3 737-800 Airplanes that have been changed as described in Master Change 2528MK3375 -4 737-700 Airplanes that have been changed as described in Master Change 2528MK3728 -5 Airplane Models:

737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 11 of 136

GroupVariable Number 1YA271 - YA272 1YA291 1YA336 - YA345 1YA351 1YA356 - YA357 1YA366 - YA367 1YA501 - YA536 1YA627 - YA631 1YA635 - YA636 1YA641 - YA642 1YA666 - YA667 1YA681 - YA691 1YA731 - YA734 1YA811 - YA814 1YA881 - YA882 1YA891 - YA892 1YA961 - YA978 1YB156 - YB158 1YB161 - YB164 1YB201 - YB208 1YB271 1YB301 - YB310 1YB521 - YB526 1YB541 - YB544 1YB551 1YB561 - YB580 2YB592 2YB594 - YB598 1YB630 - YB635 1YB656 1YB671 - YB672 2YB851 - YB859

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 13, 2011 737-25-1641Revision 1: August 08, 2011 12 of 136 BOEING SERVICE BULLETIN 737-25-1641

Pages 13–24 of 136