TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7ec09ad4b8bfca7714b96e51090cc1fa4fd783f1b071317a2b4fbee081c2cdbf' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7ec09ad4b8bfca7714b96e51090cc1fa4fd783f1b071317a2b4fbee081c2cdbf' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 737 Service Bulletin Number: 737-78-1088 Original Issue: May 12, 2010 ATA System: 7830 SUBJECT: EXHAUST - Thrust Reverser - Thrust Reverser Inner Wall Inspection and Repair Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2010 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 1 of 118
4.0
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 2 of 118 BOEING SERVICE BULLETIN 737-78-1088
BLANK PAGE
Table of Contents
Summary5
1. PLANNING INFORMATION9
A. Effectivity9
1. Airplanes9
2. Spares Affected ........................................ 1 9 B. Concurrent Requirements ...................................... 1 9 C. Reason ................................................ 1 9 D. Description .............................................. 1 9 E. Compliance .............................................. 2 0 F. Approval ............................................... 2 1 G. Manpower .............................................. 2 1 H. Weight and Balance Changes .................................... 2 2 I. Electrical Load Data ......................................... 2 2 J. References .............................................. 2 2
1. Existing Data .......................................... 2 2
2. Data supplied with this Service Bulletin ............................ 2 3
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 3 K. Publications Affected ........................................ 2 3 L. Interchangeability and Intermixability of Parts ........................... 2 4
2. MATERIAL INFORMATION ........................................ 2 5 A. Material - Price and Availability ................................... 2 5 B. Industry Support Information .................................... 2 5 C. Parts Necessary For Each Airplane ................................. 2 5
1. Kits/Parts ............................................ 2 5
2. Parts and Materials Supplied by the Operator ........................ 2 6
3. Parts Modified and Reidentified ................................ 2 7
4. Parts Removed and Not Replaced .............................. 3 7 D. Parts Necessary to Change Spares ................................. 3 7 E. Special Tooling - Price and Availability ............................... 3 7 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 8
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9 A. GENERAL INFORMATION ..................................... 3 9 B. WORK INSTRUCTIONS ....................................... 4 0 FIGURE 1: INSPECTION OF THE THRUST REVERSER BLANKET ON THE LEFT THRUST REVERSER HALF .............................................. 4 5 FIGURE 2: ELECTRICAL CONDUCTIVITY MEASUREMENT ON UPPER COMPRESSION PAD NUMBER 2 AND NUMBER 3 ON THE LEFT THRUST REVERSER HALF .............. 4 7 FIGURE 3: REMOVAL OF THE NUMBER 3 UPPER COMPRESSION PADS ON THE LEFT THRUST REVERSER HALF ....................................... 5 0 FIGURE 4: REMOVAL OF THE NUMBER 2 UPPER COMPRESSION PADS ON THE LEFT THRUST REVERSER HALF ....................................... 5 3 FIGURE 5: INSPECTION OF THRUST REVERSER INNER WALL ON THE LEFT THRUST REVERSER HALF .............................................. 5 6 FIGURE 6: REMOVAL OF THE COOLING HOLE BUSHING ON THE LEFT THRUST REVERSER HALF .................................................. 5 8
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 3 of 118 BOEING SERVICE BULLETIN 737-78-1088
FIGURE 7: INSTALLATION OF THE NEW COOLING HOLE BUSHING ON THE LEFT THRUST REVERSER HALF .............................................. 6 1 FIGURE 8: PREPARE NEW NUMBER 2 UPPER COMPRESSION PAD FOR THE LEFT THRUST REVERSER HALF ....................................... 6 4 FIGURE 9: PREPARE NEW NUMBER 3 UPPER COMPRESSION PAD FOR THE LEFT THRUST REVERSER HALF ....................................... 6 7 FIGURE 10: INSTALLATION OF THE NUMBER 2 AND NUMBER 3 UPPER COMPRESSION PADS ON THE LEFT THRUST REVERSER HALF ........................... 7 0 FIGURE 11: INSTALLATION OF THE UPPER AND LOWER INSULATION BLANKET ON THE LEFT THRUST REVERSER HALF ....................................... 7 6 FIGURE 12: INSPECTION OF THE THRUST REVERSER BLANKET ON THE RIGHT THRUST REVERSER HALF .............................................. 8 0 FIGURE 13: ELECTRICAL CONDUCTIVITY MEASUREMENT ON UPPER COMPRESSION PAD NUMBER 2 AND NUMBER 3 ON THE RIGHT THRUST REVERSER HALF ............. 8 2 FIGURE 14: REMOVAL OF THE NUMBER 3 UPPER COMPRESSION PADS ON THE RIGHT THRUST REVERSER HALF ....................................... 8 5 FIGURE 15: REMOVAL OF THE NUMBER 2 UPPER COMPRESSION PADS ON THE RIGHT THRUST REVERSER HALF ....................................... 8 8 FIGURE 16: INSPECTION OF THRUST REVERSER INNER WALL ON THE RIGHT THRUST REVERSER HALF .............................................. 9 1 FIGURE 17: REMOVAL OF THE COOLING HOLE BUSHING ON THE RIGHT THRUST REVERSER HALF .................................................. 9 3 FIGURE 18: INSTALLATION OF THE NEW COOLING HOLE BUSHING ON THE RIGHT THRUST REVERSER HALF ....................................... 9 6 FIGURE 19: PREPARE NEW NUMBER 2 UPPER COMPRESSION PAD FOR THE RIGHT THRUST REVERSER HALF ....................................... 9 9 FIGURE 20: PREPARE NEW NUMBER 3 UPPER COMPRESSION PAD FOR THE RIGHT THRUST REVERSER HALF ...................................... 1 0 2 FIGURE 21: INSTALLATION OF THE NUMBER 2 AND NUMBER 3 UPPER COMPRESSION PADS ON THE RIGHT THRUST REVERSER HALF .......................... 1 0 5 FIGURE 22: INSTALLATION OF THE UPPER AND LOWER INSULATION BLANKET ON THE RIGHT THRUST REVERSER HALF ................................. 1 1 1 APPENDIX A: INSULATION BLANKET INSPECTION ........................... 1 1 5 APPENDIX B: PLY LAY-UP DIAGRAM ................................... 1 1 6 APPENDIX C: PLY LAY-UP DIAGRAM ................................... 1 1 7 APPENDIX D: REPAIR MATERIALS FOR THRUST REVERSER INNER WALL ............. 1 1 8
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 4 of 118 BOEING SERVICE BULLETIN 737-78-1088
Commercial Airplanes 737 Service Bulletin SummaryNumber: 737-78-1088Original Issue: May 12, 2010 ATA System: 7830 SUBJECT: EXHAUST - Thrust Reverser - Thrust Reverser Inner Wall Inspection and Repair
CONCURRENT REQUIREMENTS Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND This service bulletin gives instructions for an inspection of the inner walls of the thrust reverser halves and the number 2 and 3 upper compression pads for signs of heat damage. If damage is found, the damaged structure is repaired and/or replaced. The changes given in this service bulletin will find and repair heat damage to the inner wall of the thrust reversers.
NOTE: Accomplishment of this service bulletin is not necessary on thrust reversers that have incorporated Boeing Service Bulletin 737-78-1079.
Many operators have reported heat related damage to the inner wall of the thrust reverser. During an inspection of the thrust reverser, one operator found heat damage at different locations of the inner wall. The damage was at the top, in the area of the number 2 and number 3 upper compression pads and at the lower aft edge. A flight test at Boeing showed that the temperatures applied to the inner walls of the thrust reversers are too high. Higher temperatures are due to hot precooler air leakage between the inner wall of the thrust reverser and the insulation blankets and heat transfer through the upper compression pad area and the fireseal bracket support flange.
ACTION (PRR 38690) Open or remove the thrust reversers. Do a detailed inspection of the insulation blankets. Do the eddy current inspection on the number 2 and number 3 upper compression pads. Remove the number 2 and number 3 upper compression pads. Repair or replace any compression pad if necessary. Do the ultrasonic inspection on the thrust reverser inner wall for signs of heat damage or other damage. Repair any damage found on the thrust reverser inner wall. If damage is found around the number 3 compression pad, remove the bushing in the cooling hole and repair any damage as necessary. Install a new bushing for the cooling hole if removed. Install the number 2 and number 3 upper compression pads. Change the part number on the thrust reversers. Close or install the thrust reversers and do a test of the thrust reversers.
EFFECTIVITY 737-600/-700/-700C/-800/-900 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 5 of 118
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION Boeing Industry Support information is provided in Program Letter BPL M-1151-737NG-PGM-183. Additional copies of program letters are available from Boeing Commercial Airplanes Group - Warranties.
MANPOWER Elapsed HoursTotal Task HoursEngines
26.7034.20Engine 1
26.7034.20Engine 2
MATERIAL INFORMATION Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 6 of 118 BOEING SERVICE BULLETIN 737-78-1088
BOEING SERVICE BULLETIN 737-78-1088
THRUST REPLACE A COOLING HOLE REVERSER BUSHING BEHIND THE NO. 3
UPPER COMPRESSION PAD IF NECESSARY.
INSPECT INNER WALL, INSULATION
BLANKETS, UPPER COMPRESSION PADS,
AND REPAIR IF NECESSARY 00 01/01%
LEFT SIDE SHOWN, RIGHT SIDE EQUIVALENT Original Issue: May 12, 2010 BOEING PROPRIETARY - 737-78-1088 Copyright © Unpublished Work - See page 1 for details. 7 of 118
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 8 of 118 BOEING SERVICE BULLETIN 737-78-1088
BLANK PAGE
Commercial Airplanes 737 Service Bulletin Number: 737-78-1088 Original Issue: May 12, 2010 ATA System: 7830 SUBJECT: EXHAUST - Thrust Reverser - Thrust Reverser Inner Wall Inspection and Repair
1. PLANNING INFORMATION A. Effectivity
1. Airplanes This service bulletin is for the airplanes shown below. An equivalent change is on subsequent production airplanes. Refer to PRR 38690 for data about this change.
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP Airplanes with line numbers 515 through 2229 without line numbers 1981 and 2093 and with thrust reverser part number 315A2295-202 or less.
-1 Airplanes with line numbers 1 through 514 and with thrust reverser part number 315A2295-202 or less.
-2 Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900 GroupVariable Number 2YA001 - YA060 1YA061 - YA099 1YA101 - YA199 2YA201 - YA207 1YA208 - YA211 1YA221 2YA231 - YA242 2YA251 - YA254
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 9 of 118
GroupVariable Number 1YA255 - YA256 2YA271 - YA272 2YA291 2YA301 - YA302 2YA311 - YA314 2YA321 - YA322 1YA323 1YA336 - YA345 1YA351 1YA356 - YA357 1YA366 - YA367 1YA371 - YA377 2YA501 - YA536 2YA541 - YA548 1YA549 - YA552 2YA571 - YA578 2YA601 - YA612 1YA613 - YA615 1YA621 - YA622 1YA626 - YA631 1YA635 - YA636 1YA641 - YA642 1YA645 - YA650 1YA656 - YA659 1YA666 - YA667 1YA671 - YA672 1YA681 - YA691 2YA701 - YA704 1YA705 - YA710 2YA721 - YA722 2YA731 - YA733 1YA734 2YA751 - YA756
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 10 of 118 BOEING SERVICE BULLETIN 737-78-1088
GroupVariable Number 1YA801 - YA803 1YA809 2YA811 - YA814 2YA831 - YA833 1YA834 - YA835 2YA841 - YA847 1YA848 - YA862 2YA881 - YA882 1YA891 - YA892 2YA961 - YA964 1YA965 - YA978 2YB001 - YB006 1YB101 - YB132 1YB151 - YB153 1YB156 - YB158 1YB161 - YB164 1YB171 - YB172 1YB181 - YB184 1YB201 - YB208 1YB271 1YB276 1YB301 - YB310 1YB371 - YB392 1YB501 - YB502 1YB521 - YB526 1YB541 - YB544 1YB551 1YB561 - YB598 1YB601 - YB632 1YB651 1YB656 1YB671 1YB851 - YB863
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 11 of 118 BOEING SERVICE BULLETIN 737-78-1088
GroupVariable Number 1YB871 - YB874 1YB881 - YB893 1YB901 - YB903 1YB911 1YB961 - YB967 2YC001 - YC016 1YC017 - YC030 2YC051 - YC060 1YC061 - YC070 2YC071 - YC077 1YC078 - YC083 1YC091 - YC094 2YC101 - YC103 1YC104 2YC111 - YC112 1YC113 2YC121 2YC126 - YC127 2YC136 - YC137 1YC138 - YC141 1YC146 - YC147 1YC151 - YC156 1YC166 - YC171 1YC176 - YC178 1YC186 - YC189 1YC201 - YC203 1YC206 - YC207 2YC301 - YC303 1YC304 - YC305 2YC321 - YC362 1YC363 - YC380 2YC381 - YC382 1YC383 - YC387
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 12, 2010 737-78-1088 12 of 118 BOEING SERVICE BULLETIN 737-78-1088