Copy · Boeing - Service Bulletin · 143 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0364; AD 2013-16-24 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '40b35e1c4668199b9a3c398904e9600e6e4c6b2db14c84b0376cb5faf3afcc63'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 747 Service Bulletin

SPECIAL ATTENTION Number: 747-53-2253 Original Issue: December 14, 1984 Revision 4: September 09, 2010 ATA System: 5311 SUBJECT: FUSELAGE - Nose Section - Station 340 to 400 Stringer 6 Inspection and Modification Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 1989 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.

This document includes proprietary information owned by The Boeing Company and/or one or more third parties.

Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 1 of 143

5.0

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 2 of 143 BOEING SERVICE BULLETIN 747-53-2253

BLANK PAGE

Table of Contents

Revision Transmittal Sheet5

Summary9

1. PLANNING INFORMATION ........................................ 1 3 A. Effectivity ............................................... 1 3

1. Airplanes ............................................ 1 3

2. Spares Affected ........................................ 1 9 B. Concurrent Requirements ...................................... 1 9 C. Reason ................................................ 1 9 D. Description .............................................. 2 0 E. Compliance .............................................. 2 4 F. Approval ............................................... 3 0 G. Manpower .............................................. 3 1 H. Weight and Balance Changes .................................... 3 3 I. Electrical Load Data ......................................... 3 3 J. References .............................................. 3 4

1. Existing Data: ......................................... 3 4

2. Data supplied with this Service Bulletin: ........................... 3 4

3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 5 K. Publications Affected ........................................ 3 5 L. Interchangeability and Intermixability of Parts ........................... 3 5

2. MATERIAL INFORMATION ........................................ 3 7 A. Material - Price and Availability ................................... 3 7 B. Industry Support Information .................................... 3 7 C. Parts Necessary For Each Airplane ................................. 3 7

1. Kits/Parts: ........................................... 3 7

2. Parts and Materials Supplied by the Operator: ........................ 3 7

3. Parts Modified and Reidentified: ............................... 3 9

4. Parts Removed and Not Replaced: .............................. 3 9 D. Parts Necessary to Change Spares ................................. 3 9 E. Special Tooling - Price and Availability ............................... 3 9 F. Special Tooling Necessary to do this Service Bulletin ....................... 3 9

3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 1 A. GENERAL INFORMATION ..................................... 4 1 B. WORK INSTRUCTIONS ....................................... 4 2 FIGURE 1: THIS FIGURE IS DELETED .................................. 5 0 FIGURE 2: STRINGER 6 SKIN LAP SPLICE INITIAL INSPECTION - GROUP 1 AIRPLANES [Group 1] .................................................. 5 1 FIGURE 3: STRINGER 6 SKIN LAP SPLICE INITIAL INSPECTION - GROUP 2 AIRPLANES [Group 2] .................................................. 5 4 FIGURE 4: STRINGER 6 SKIN LAP SPLICE INITIAL INSPECTION - GROUP 3 AIRPLANES [Group 3] .................................................. 5 7 FIGURE 5: STRINGER 6 SKIN LAP SPLICE INITIAL INSPECTION - GROUP 4 AIRPLANES [Group 4] .................................................. 6 0 FIGURE 6: STRINGER 6 SKIN LAP SPLICE INITIAL INSPECTION - GROUP 5 AIRPLANES [Group 5] .................................................. 6 2 FIGURE 7: RIGHT SIDE SKIN SPLICE ACCESS ............................. 6 4

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 3 of 143 BOEING SERVICE BULLETIN 747-53-2253

FIGURE 8: LEFT SIDE SKIN SPLICE ACCESS .............................. 6 6 FIGURE 9: THIS FIGURE IS DELETED .................................. 6 7 FIGURE 10: THIS FIGURE IS DELETED .................................. 6 8 FIGURE 11: THIS FIGURE IS DELETED .................................. 6 9 FIGURE 12: THIS FIGURE IS DELETED .................................. 7 0 FIGURE 13: THIS FIGURE IS DELETED .................................. 7 1 FIGURE 14: POST-MODIFICATION INSPECTIONS - GROUP 1 AIRPLANES WITH DOUBLERS INSTALLED IN ACCORDANCE WITH THIS SERVICE BULLETIN [Group 1] .............. 7 2 FIGURE 15: POST-MODIFICATION INSPECTIONS - GROUP 2 AIRPLANES WITH DOUBLERS INSTALLED IN ACCORDANCE WITH THIS SERVICE BULLETIN [Group 2] .............. 7 5 FIGURE 16: POST-MODIFICATION INSPECTIONS - GROUP 3 AIRPLANES WITH DOUBLERS INSTALLED IN ACCORDANCE WITH THIS SERVICE BULLETIN [Group 3] .............. 7 8 FIGURE 17: POST-MODIFICATION INSPECTIONS - GROUP 4 AIRPLANES WITH DOUBLERS INSTALLED IN ACCORDANCE WITH THIS SERVICE BULLETIN [Group 4] .............. 8 1 FIGURE 18: POST-MODIFICATION INSPECTIONS - GROUP 5 AIRPLANES WITH DOUBLERS INSTALLED IN ACCORDANCE WITH THIS SERVICE BULLETIN [Group 5] .............. 8 3 FIGURE 19: POST-MODIFICATION INSPECTIONS - GROUP 1 AIRPLANES WITH STRINGER 6 SKIN

LAP SPLICE MODIFICATION DOUBLERS INSTALLED IN ACCORDANCE WITH SB 747-53-2272 [Group 1] ..................................... 8 5 FIGURE 20: POST-MODIFICATION INSPECTIONS - GROUP 2 AIRPLANES WITH STRINGER 6 SKIN

LAP SPLICE MODIFICATION DOUBLERS INSTALLED IN ACCORDANCE WITH SB 747-53-2272 [Group 2] ..................................... 9 7 FIGURE 21: POST-MODIFICATION INSPECTIONS - GROUP 3 AIRPLANES WITH STRINGER 6 SKIN

LAP SPLICE MODIFICATION DOUBLERS INSTALLED IN ACCORDANCE WITH SB 747-53-2272 [Group 3] .................................... 1 0 9 FIGURE 22: POST-MODIFICATION INSPECTIONS - GROUP 4 AIRPLANES WITH STRINGER 6 SKIN

LAP SPLICE MODIFICATION DOUBLERS INSTALLED IN ACCORDANCE WITH SB 747-53-2272 [Group 4] .................................... 1 2 1 FIGURE 23: POST-MODIFICATION INSPECTIONS - GROUP 5 AND 6 AIRPLANES WITH STRINGER 6

SKIN LAP SPLICE MODIFICATION DOUBLERS INSTALLED IN ACCORDANCE WITH SB 747-53-2272 [Group 5-6] ................................... 1 2 9 Appendix A: FLIGHT SAFETY INSPECTION - DISCREPANCY REPORTING INSTRUCTIONS . . . 137 Appendix B: ALTERNATIVE LAP SPLICE TRIM INSTRUCTIONS .................... 1 4 0 Appendix C: EXTENSION OF MODIFICATION DOUBLERS WHEN AN SRM REPAIR IS PRESENT . 143

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 4 of 143 BOEING SERVICE BULLETIN 747-53-2253

Commercial Airplanes 747 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 747-53-2253Original Issue: December 14, 1984 Revision 4: September 09, 2010 ATA System: 5311 SUBJECT: FUSELAGE - Nose Section - Station 340 to 400 Stringer 6 Inspection and Modification This Revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION More work is necessary on airplanes changed as shown in previous revisions of this service bulletin. For airplanes on which protruding head fastener modification was done in accordance with a previous revision of this service bulletin, operators should refer to Service Bulletin 747-53A2748 which has been issued to provide additional inspection and modification instructions. Installation of protruding head fasteners as a modification is no longer acceptable and has been removed from this bulletin.

In addition, inspection requirements have changed for airplanes that have external doublers installed in accordance with Service Bulletin 747-53-2272 and that require post-modification inspections in accordance with this service bulletin. Operators that have already begun post-modification inspections should incorporate the revised post-modification inspection requirements during the next scheduled post-modification inspection for this service bulletin.

Federal Aviation Administration (FAA) Airworthiness Directives 90-06-06, 90-23-14, 2004-07-22 R1, and 2009-04-16 are related to this service bulletin. Airworthiness Directive 90-23-14 replaced Airworthiness Directive 85-17-05.

Airplanes with line numbers 271, 276, 336, 344, 369, 389, 397, 474, 491, 518, 521 and 539 have been added to the service bulletin effectivity in new Group 6.

REASON FOR REVISION Revision 4 is sent to add airplane line numbers 271, 276, 336, 344, 369, 389, 397, 474, 491, 518, 521 and 539 to the service bulletin effectivity. These airplanes have been modified by Boeing to Stretched Upper Deck (SUD) configuration and will require post-modification inspections in accordance with this service bulletin. For these airplanes, the inspection requirements given in this service bulletin supersede the inspection requirements for the stringer 6 lap splice given in Service Bulletin 747-53A2367.

Revision 4 is also sent to remove the protruding head fastener modification option from this service bulletin and reference Service Bulletin 747-53A2748.

Also included in Revision 4 are instructions applicable to airplanes that have repair doublers installed at Stringer 6 per Service Bulletin 747-53A2321.

Revision 4 changes to this service bulletin include:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 5 of 143

– General: Format and appearance of some information has changed throughout the service bulletin. The location of some information has also been changed to fit the new service bulletin format. Vertical lines are not shown on the left edge of the page where format changes occur.

– In Summary section: Added Airworthiness Directive and Service Related Problem statement. Updated the description of the action to be accomplished for Groups 1-5 and added a description of the action to be accomplished for new Group 6. Revised Effectivity description and Compliance information.

– In paragraph 1.A., Effectivity: Added Group 6 to Group/Configuration table for airplanes that were modified by Boeing to Stretched Upper Deck. Also, updated customer list.

– In paragraph 1.C., Reason: Added Service Related Problem statement and added Revision 4 reason description.

– In paragraph 1.D., Description: Updated notes and description information. Added Revision 4 " more work" statement and added Affected Maintenance Zones tables. Also, added common access service bulletin notes.

– In paragraph 1.E., Compliance: Added compliance Tables 1, 2, and 3 for Group 1-5 airplanes. In previous revisions of this service bulletin, Group 1-5 compliance information was in a logic diagram in Figure 1. Added compliance Table 4 for new Group 6. Note that the compliance information for Groups 1-5 was converted to a compliance table to maintain consistency with the compliance information for Group 6 and to update to new service bulletin format standards.

– In paragraph 1.F., Approval: Updated approval paragraph and updated AMOC statement for AD 90-23-14.

Added AMOC statements for AD 90-06-06 and AD 2004-07-22 R1.

– In paragraph 1.G., Manpower: Revised post-modification manpower table to include Group 6 airplanes.

– In paragraph 1.H., Weight and Balance Changes: Revised note (c) to specify that protruding head fastener modification information has been deleted in Revision 4.

– In paragraph 1.J., References: Updated existing data references.

– In paragraph 1.K., Publications Affected: Added Damage Tolerance Inspection information.

– In paragraph 2., Material Information: Updated this section to reflect new service bulletin format. Also, added note regarding deletion of parts and materials for protruding head fastener modification.

– In paragraph 3.A., General Information: Updated existing general note information, and added general notes 10 through 15.

– In paragraph 3.B., Work Instructions: Updated Structural Repair Manual (SRM) references and moved optional inspection notes to Figures where appropriate. Information previously identified as "After modification flight safety inspections", which was previously listed under Part 3, has now been moved to a new section called "Part 4 - Post-Modification Inspections". Revised Post-Modification information (now in new Part 4) to reflect the addition of Group 6 airplanes. In Part 3 (modification) and Part 4 (post-modification inspections), notes were added to recommend appropriate action for related service bulletins 747-53A2563 and 747-53A2748. Many other changes have been made in this section to update and revise the Work Instructions to meet current requirements and standards.

– Figure 1: This figure has been deleted. In previous revisions of this service bulletin, Figure 1 contained logic diagrams for compliance information. Compliance information is now found in paragraph 1.E., Compliance.

– In Figure 2, 3, 4, 5, and 6: Revised Step 1 to refer to additional procedures that are acceptable for eddy current inspection.

– Figures 9, 10, 11, 12, and 13: These figures have been deleted. In previous revisions of this service bulletin, these figures contained instructions for protruding head fastener modification. Installation of protruding head fasteners as a modification is no longer acceptable, and has been removed from this service bulletin.

– Figures 14, 15, 16, 17, and 18: Revised illustrations and instructions to delete information related to inspection of areas where top row protruding head fastener modification was done. Areas where protruding head fastener modification was done should now be inspected and modified in accordance with Service Bulletin 747-53A2748. Also, update 747 NDT manual references. For Figures 14 and 15, a note has also been added to provide revised inspection instructions if external doublers have been installed in accordance with Service Bulletin 747-53A2321.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 6 of 143 BOEING SERVICE BULLETIN 747-53-2253

– Figures 19, 20, 21, 22, and 23: Added additional table and steps to provide all inspection options for airplanes that have had Zone 1 modification done in accordance with Service Bulletin 747-53-2272. For Figures 19 and 20, a note has also been added to provide revised inspection instructions if external doublers have been installed in accordance with Service Bulletin 747-53A2321.

– Appendix A: This new appendix has been added and contains discrepancy reporting instructions. In previous revisions of this service bulletin, this information was found in a section called "ADDENDUM".

– Appendix B: This new appendix has been added and contains additional lap splice trimming instructions to be used, as necessary, during modification.

– Appendix C: This new appendix has been added and contains an example of how to extend the modification doubler in an area where an SRM repair has been removed.

Paragraph 1.A., Effectivity, shows changes of airplane operators. Each operator should examine the Effectivity paragraph for changes.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.

Pages with no vertical lines have no important changes.

REVISION HISTORY December 14, 1984Original Issue:

January 25, 1990Revision 1:

March 29, 1990Revision 2:

March 24, 1994Revision 3:

September 09, 2010Revision 4:

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 7 of 143 BOEING SERVICE BULLETIN 747-53-2253

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 8 of 143 BOEING SERVICE BULLETIN 747-53-2253

BLANK PAGE

Commercial Airplanes 747 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 747-53-2253Original Issue: December 14, 1984 Revision 4: September 09, 2010 ATA System: 5311 SUBJECT: FUSELAGE - Nose Section - Station 340 to 400 Stringer 6 Inspection and Modification BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND Accomplishment of the work specified in this bulletin will ensure the structural integrity of the fuselage skin lap splice along Stringer 6 left and Stringer 6 right from body station (BS) 340 to 400 throughout the operational life of the airplane.

One operator reported fuselage skin cracks of 1.0 to 18.5 inches long between BS 340 and 400 at Stringer 6 left and Stringer 6 right on three airplanes. These airplanes had accumulated between 12,400 and 14,800 flight-cycles. Investigation revealed the cracks were initiated in the fastener countersinks and were propagated by fatigue. Cabin pressurization was the primary loading source for the fatigue cracking.

A structural reassessment of the 747 airplane was made under the requirements of Federal Aviation Administration (FAA) Advisory Circular 91-56, in accordance with Federal Aviation Regulation (FAR) 25.571 as amended in 1978, to ensure the safe operation of 747 airplanes throughout their operational life. As a result of this reassessment, the Stringer 6 lap splice, left and right sides, between BS 340 and 400 have been determined to be structurally significant and critical to the structural integrity of the airplane. Skin cracks that are not detected prior to reaching critical crack length may cause in-flight depressurization of the airplane and the inability to withstand current regulatory failsafe loads.

Therefore, a flight safety inspection program is defined in this bulletin which will continue throughout the operational life of the airplane.

The Federal Aviation Administration (FAA) has issued an Airworthiness Directive (AD) which requires incorporation of this service bulletin for Group 1-5 airplanes.

Boeing Service Related Problems (SRP) 747-SRP-53-0292 and 747-SRP-53-0310 are related to this service bulletin.

ACTION The 747 Aging Fleet Structures Working Group recommends that operators accomplish a modification, in accordance with this service bulletin, before the accumulation of 20,000 flight-cycles.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 9 of 143

This bulletin details an inspection program and modifications to improve the resistance to cracking along the affected skin lap splice.

Group 1-5:

This bulletin also provides an economics based inspection program. Paragraph 1.E. gives recommended compliance times for economics based inspections.

Group 1-5:

Do all the investigative and corrective actions below, as necessary, at the compliance times and repeat intervals given in paragraph 1.E., Compliance.

— Do initial external detailed and High Frequency Eddy Current (HFEC) inspections.

— If no crack is found during initial inspection, repeat the inspection or do external doubler modification.

Continue repetitive inspections on unmodified areas.

— If any crack is indicated during the initial inspection (on an unmodified airplane), do a repair in accordance with the applicable 747 Structural Repair Manual or do an external doubler modification. Continue repetitive inspections on unmodified and unrepaired areas.

— At modified areas where doublers have been installed in accordance with this service bulletin (drawing 65B28215), do initial and repetitive detailed and HFEC (internal and external) inspections. At modified areas where doublers have been installed in accordance with Service Bulletin 747-53-2272 (drawing 624U0003), do initial and repetitive external detailed, external HFEC, and external Low Frequency Eddy Current (LFEC) inspections. If any crack is found during any post-modification inspection, repair in accordance with the applicable 747 SRM, or contact Boeing for repair instructions, and do the repair.

Group 6:

— At modified areas, do initial and repetitive external detailed, external HFEC, and external LFEC inspections.

If any crack is found during any post-modification inspection, repair in accordance with the applicable 747 SRM, or contact Boeing for repair instructions, and do the repair.

EFFECTIVITY 747-100, 747-100B, 747-200B, 747-200C, 747-200F, 747-300, 747SP and 747SR series airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.

COMPLIANCE Refer to paragraph 1.E., Compliance.

The Federal Aviation Administration (FAA) will possibly release another Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.

Group 1-5:

Federal Aviation Administration (FAA) Airworthiness Directive 90-23-14 is related to this service bulletin.

Airworthiness Directive 90-23-14 replaced Airworthiness Directive 85-17-05.

Federal Aviation Administration (FAA) Airworthiness Directives 90-06-06, 2004-07-22 R1, and 2009-04-16 are also related to this service bulletin.

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 10 of 143 BOEING SERVICE BULLETIN 747-53-2253

INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the configuration changes, inspection, or repair procedures given in this service bulletin.

MANPOWER Refer to paragraph 1.G., Manpower.

MATERIAL INFORMATION Operator-furnished parts

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 11 of 143 BOEING SERVICE BULLETIN 747-53-2253

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 14, 1984 747-53-2253Revision 4: September 09, 2010 12 of 143 BOEING SERVICE BULLETIN 747-53-2253

BLANK PAGE

Pages 13–24 of 143