Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '811f4f10b8c8a699b13c95857b1ef5ce2c564015a0ea5b2524a1a1b5e5311d2c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '811f4f10b8c8a699b13c95857b1ef5ce2c564015a0ea5b2524a1a1b5e5311d2c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplane Group 757 Service Bulletin Number: 757-25-0182 Revision Transmittal SheetDate: October 10, 1996 Revision 2: January 11, 2001 ATA System: 2565 SUBJECT: EQUIPMENT/FURNISHINGS - Emergency - Off-Wing Escape System - Modification Of The Door Latch System And The Sensor Installation This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION More work may be necessary on airplanes retrofitted per the initial release or Revision 1 of this service bulletin.
REASON FOR REVISION This revision:
- changes the identification of Line Number 727 to 726 on Summary page, removes NE325 from Effectivity, and adds NE323 to Effectivity.
- divides the Accomplishment Instructions into two parts, Part I and II. Part l modifies airplanes that have never been retrofitted by this service bulletin. Part ll modifies airplanes that have been retrofitted by earlier releases of this bulletin.
- Part I of the Accomplishment Instructions modifies the compartment door latch assembly and relocates the door lock sensing mechanism from the aft end of the door to the forward end of door.
- Part II of the Accomplishment Instructions modifies airplanes that have previously incorporated earlier versions of this bulletin.
- identifies the subset of airplanes that must open circuit breaker C4435.
- identifies Federal Aviation Administration (FAA) Airworthiness Directive 99-17-20, Amendment 39-11266 is related to this service bulletin Paragraph 1.A., Effectivity, shows changes of airplane operators. Each operator should examine the Effectivity paragraph for changes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY Initial Release: October 10, 1996 Revision 1: June 12, 1997 Revision 2: January 11, 2001 757-25-0182 Revision Transmittal Page 1 of 1
No text on this page: it may be a figure. Open the PDF to see it.
Commercial Airplane Group 757 Service Bulletin Number: 757-25-0182 SummaryDate: October 10, 1996 Revision 2: January 11, 2001 ATA System: 2565 SUBJECT: EQUIPMENT/FURNISHINGS - Emergency - Off-Wing Escape System - Modification Of The Door Latch System And The Sensor Installation
CONCURRENT REQUIREMENTS None
BACKGROUND This service bulletin provides instructions to improve the door sensing system that identifies whether the off-wing escape slide compartment door is positively locked, or still open after the crank handle has been moved to the locked position.
Since June 1993, four operators and Boeing have reported a total of six losses of the off-wing escape slides while airplanes were in flight. These slides are known to have caused damage to the fuselage aft of the slide compartment and to the inboard flaps. The escape slide in each incident, was damaged beyond repair and had to be replaced.
Boeing analysis of the off-wing slide losses indicates that sometimes the forward edge of the slide compartment door does not latch positively because: (1) it is difficult to visually ensure that the slide compartment door is positively locked; (2) the aft location of the door sensor proximity switch on the compartment door does not ensure that the forward end of the door is locked; (3) incorrect installation of the lockbase retainer on the door latch tube may prevent positive locking of the compartment door.
This service bulletin provides instructions to: (1) replace the lockbase retainer and the bearing in the door locking mechanism with more reliable parts; (2) move the door sensor proximity switch to the forward location on the compartment door, and install a new target, for sensing more positive indication that the compartment door is securely locked.
As part of a service bulletin validation program, this change was completed on airplane NE325 before the initial release of the service bulletin.
Several operators have reported clearance and alignment problems with the target and door sensor proximity switch installations with airplanes retrofitted per prior releases of this service bulletin.
Investigation of these earlier modification installations has determined that installation of the door sensor proximity switch, could interfere with the door latch tube. This interference can damage the door sensor proximity switch.
Boeing Service Related Problem (SRP) 25-0079 is related to this service bulletin.
ACTION (PRR 54530-146) On airplanes that have never been retrofitted, a new bearing and new lockbase retainer are installed on the compartment door latching mechanism. The door sensor proximity switch and the door sensor target are relocated from the aft end of the compartment door to the forward end of the door.
The off-wing escape slide pneumatic deployment system test, and system test of the slide compartment door will complete this modification.
On airplanes that have been retrofitted by the initial release of this service bulletin, or Revision 1, additional work may be required. A simple test that verifies that the compartment door sensor, as retrofitted, provides an accurate indication of the door lock condition , will preclude any further work.
If the test indicates that the compartment door is not locking positively, then a new target must replace the installed target and the switch remounted on the new bracket, per this revision R2.
EFFECTIVITY All 757 airplanes with off-wing escape slide systems through Line Number 726, except 715 and 716.
757-25-0182 Summary Page 1 of 2
BOEING SERVICE BULLETIN 757-25-0182
COMPLIANCE Boeing recommends that the change in this service bulletin be accomplished during the next scheduled maintenance check.
Federal Aviation Administration (FAA) Airworthiness Directive 99-17-20, Amendment 39-11266 is related to this service bulletin.
INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER See Paragraph I.G
MATERIAL INFORMATION Operator Supplied Parts
OVERWING EMERGENCY
EXIT HATCH
SWITCH FROM AFT DOOR LOCATION
TO FORWARD DOOR LOCATION
RELOCATE DOOR SENSOR PROXIMITY
FROM AFT DOOR LOCATION TO
FORWARD DOOR LOCATION
RELOCATE DOOR SENSOR TARGET
NEW IMPROVED PARTS
RETAINER AND BEARING WITH
REPLACE EXISTING LOCKBASE
CARRIER
DOOR LATCH TUBE OFF−WING ESCAPE
SLIDE PACK
COMPARTMENT DOOR OFF−WING ESCAPE SLIDE FWD R80931 October 10, 1996 757-25-0182 Revision 2: January 11, 2001 Summary Page 2 of 2
Commercial Airplane Group 757 Service Bulletin Number: 757-25-0182 Date: October 10, 1996 Revision 2: January 11, 2001 ATA System: 2565 SUBJECT: EQUIPMENT/FURNISHINGS - Emergency - Off-Wing Escape System - Modification Of The Door Latch System And The Sensor Installation
1. PLANNING INFORMATION A. Effectivity
1. Airplanes Refer to Service Bulletin Index Document D624N001, Part 3 for Airplane Variable Number, Line Number, and Serial Number data.
Airplane Models:
757-200 757-200CB
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AEROMEXICO (AMX) NE301
AMERICAN AIRLINES (AAL) ND011-ND059 ND111-ND113 ND161-ND166 ND168-ND199
CONDOR (CDF) NE162-NE177
CONTINENTAL AIRLINES (CAL) ND301-ND317
DELTA AIR LINES (DAL) NA501-NA586 NB001-NB004
EL AL ISRAEL AIRLINES (ELA) ND001-ND007
ETHIOPIAN AIRLINES (ETH) NE201-NE204
FAR EASTERN AIR TRANSPORT (FAT) NE3020
IBERIA AIRLINES (IBE) ND241-ND245 ND248
ICELANDAIR (ICE) ND201-ND203 October 10, 1996 757-25-0182 Revision 2: January 11, 2001 Page 1 of 51
BOEING SERVICE BULLETIN 757-25-0182
MEXICANA AIRLINES (CMA) NE161
NATIONAL AIRLINES (NAB) ND246-ND247
NORTHWEST AIRLINES (NWA) NE311-NE323
ROYAL NEPAL AIRLINES (RNA) ND891 ND895
SHANGHAI AIRLINES (SHA) NE001-NE007
UNITED AIRLINES (UAL) NE011-NE088 NE091-NE093 NE141-NE150
XIAMEN AIRLINES (XIA) ND221-ND225
IDENTIFICATION BY VARIABLE NUMBER NA501-NA586 NB001-NB004 ND001-ND007 ND011-ND059 ND111-ND113 ND161-ND199 ND201-ND203 ND221-ND225 ND241-ND248 ND301-ND317 ND891 ND895 NE001-NE007 NE011-NE088 NE091-NE093 NE141-NE150 NE161-NE177 NE201-NE204 NE301-NE302 NE311-NE323
2. Spares Examine your spares supply for the parts identified in Paragraph 2.E., Existing Parts Accountability. If any parts are found, refer to Paragraph 2.E., Existing Parts Accountability, for the recommended use.
October 10, 1996 757-25-0182 Revision 2: January 11, 2001 2
BOEING SERVICE BULLETIN 757-25-0182 B. Concurrent Requirements None C. Reason This service bulletin provides instructions to improve the door sensing system that identifies whether the off-wing escape slide compartment door is positively locked, or still open after the crank handle has been moved to the locked position.
Since June 1993, four operators and Boeing have reported a total of six losses of the off-wing escape slides while airplanes were in flight. These slides are known to have caused damage to the fuselage aft of the slide compartment and to the inboard flaps. The escape slide in each incident, was damaged beyond repair and had to be replaced.
Boeing analysis of the off-wing slide losses indicates that sometimes the forward edge of the slide compartment door does not latch positively because: (1) it is difficult to visually ensure that the slide compartment door is positively locked; (2) the aft location of the door sensor proximity switch on the compartment door does not ensure that the forward end of the door is locked; (3) incorrect installation of the lockbase retainer on the door latch tube may prevent positive locking of the compartment door.
This service bulletin provides instructions to: (1) replace the lockbase retainer and the bearing in the door locking mechanism with more reliable parts; (2) move the door sensor proximity switch to the forward location on the compartment door, and install a new target for sensing more positive indication that the compartment door is securely locked.
Several operators have reported clearance and alignment problems with the target and door sensor proximity switch installations with airplanes retrofitted per prior releases of this service bulletin.
Investigation of these earlier modification installations has determined that installation of the door sensor proximity switch, could interfere with the door latch tube. This interference can damage the door sensor proximity switch.
Before release of Revision 2 of this service bulletin, the Top Kit 012N8928-1 identified in previous releases of this service bulletin, was inadvertently superseded by Top Kit 012N8928-51. This service bulletin provides instructions and parts that replace the target, bracket and parts provided in Top Kits 012N8928-1 and -51, with new parts. When these new parts are installed per this Revision 2, the retrofitted configuration will be the same or equivalent to the production configuration.
Revision 1 added airplane ND895 to the service bulletin effectivity.
This revision:
- changes the identification of Line Number 727 to 726 on Summary page, removes NE325 from Effectivity, and adds NE323 to Effectivity.
- divides the Accomplishment Instructions into two parts, Part I and II. Part l modifies airplanes that have never been retrofitted by this service bulletin. Part ll modifies airplanes that have been retrofitted by earlier releases of this bulletin.
- Part I of the Accomplishment Instructions modifies the compartment door latch assembly and relocates the door lock sensing mechanism from the aft end of the door to the forward end of door.
- Part II of the Accomplishment Instructions modifies airplanes that have previously incorporated earlier versions of this bulletin.
- identifies the subset of airplanes that must open circuit breaker C4435.
- identifies Federal Aviation Administration (FAA) Airworthiness Directive 99-17-20, Amendment 39-11266 is related to this service bulletin As part of a service bulletin validation program, this change was completed on airplane NE325 before the initial release of this service bulletin.
Boeing Service Related Problem (SRP) 25-0079 is related to this service bulletin.
October 10, 1996 757-25-0182 Revision 2: January 11, 2001 3
BOEING SERVICE BULLETIN 757-25-0182 D. Description The off-wing escape slide compartment doors on each side of the airplane are modified.
On airplanes that have never been retrofitted, a new bearing and new lockbase retainer are installed on the compartment door latching mechanism. The door sensor proximity switch and the door sensor target are relocated from the aft end of the compartment door to the forward end of the door. The off-wing escape slide pneumatic deployment system test, and system test of the slide compartment door will complete this modification.
On airplanes that have been retrofitted by the initial release of this service bulletin, or Revision 1, additional work may be required. A simple test that verifies that the compartment door sensor, as retrofitted, provides an accurate indication of the door lock condition, will preclude any further work. If the test indicates that the compartment door is not locking positively, then a new target must replace the installed target and the switch remounted on the new bracket, per this revision R2.
This service bulletin contains actions that are also in service bulletin 757-25-0200, "EQUIPMENT/FURNISHINGS - Emergency - Off-Wing Escape System - Bumper Assembly and Placard Installation". To reduce overall airplane down time, operators may desire to schedule modifications to both service bulletins at the same time.
An evaluation form is attached to this service bulletin. Please use this form to tell us what you think of the quality of this service bulletin.
E. Compliance Boeing recommends that the change given in this service bulletin be done during the next scheduled maintenance time.
Federal Aviation Administration (FAA) Airworthiness Directive 99-17-20, Amendment 39-11266 is related to this service bulletin.
F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable Federal Aviation Regulations (FAR) and are FAA approved. This service bulletin and the FAA approval were based on the airplane in its original Boeing delivery configuration or as modified by other FAA approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.
This service bulletin has been approved by the FAA. In addition, the Manager of the FAA Seattle Aircraft Certification Office approved the modification defined in this service bulletin as an alternative method of compliance to the requirements of paragraph (a) of AD 99-17-20. All provisions of AD 99-17-20 that are not specifically referenced in the above sentence remain fully applicable and must be complied with.
October 10, 1996 757-25-0182 Revision 2: January 11, 2001 4
BOEING SERVICE BULLETIN 757-25-0182 G. Manpower The table below shows an estimate of the man-hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator man-hour data if necessary. The estimate does not include lost time. These are some examples of lost time:
- Time to adjust to the workplace
- Time to schedule the work
- Time to examine the work
- Time to cure the materials
- Time to make the parts
- Time to find the tools.
TABLE I - PART I Task Number of Persons Man-Hours Elapsed Time (Hours) Modify Door Latch Tube Mechanism, Relocate Door Sensor Proximity Switch and Door SensorTarget 2 16 8 Functional Test 2 4 2
TOTAL FOR EACH SIDE OF THE AIRPLANE TO ACCOMPLISH PART I.
20 10
TOTAL FOR EACH AIRPLANE TO ACCOMPLISH PART I.
40 20
TABLE II - PART II Task Number of Persons Man-Hours Elapsed Time (Hours) Install Door Sensor Proximity Switch on new Bracket, and Install new Door Sensor Target 2 4 2 Door Open Test 2 1 0.5
TOTAL FOR EACH SIDE OF THE AIRPLANE
TO ACCOMPLISH PART II 5 2.5
TOTAL FOR EACH AIRPLANE TO
ACCOMPLISH PART II 10 5 H. Weight and Balance Changes None I. Electrical Load Data Not changed October 10, 1996 757-25-0182 Revision 2: January 11, 2001 5
BOEING SERVICE BULLETIN 757-25-0182 J. References
1. Existing Data:
a. Engineering Change Memo PRR 54530-146
b. Service Related Problem (SRP) 25-0079
c. 757 Maintenance Manual (AMM) Subject 20-30-03, 25-65-00, 25-65-07, 25-65-09, 52-71-00
d. 757 Structural Repair Manual (SRM) Subject 51-20-01, 51-30-01, 51-30-03, 51-40-01
e. Boeing Standard Overhaul Practices Manual (BSOPM) 20-30-03, 20-41-02, 20-42-05, 20-42-10, 20-43-03, 20-50-03, 20-50-05, 20-50-10, 20-50-12
f. Boeing Service Bulletin 757-25-0200, "EQUIPMENT/FURNISHINGS - Emergency - Off-Wing Escape System - Bumper Assembly and Placard Installation"
g. Federal Aviation Administration (FAA) Airworthiness Directive 99-17-20, Amendment 39-11266
2. Data supplied with this service bulletin:
None
3. Installation Drawings:
Drawing Number Title 284N1893 Kit - Sensor Installation - Off-Wing Escape Slide Door Unlatched 284N4148 Sensor Installation - Escape Slide Door Unlatched, Off-Wing 416N2720 Door Latch Installation - Off-Wing Escape Slide System These drawings were used to prepare this service bulletin. These drawings are not necessary to make the specified changes, and are not supplied with this service bulletin. These drawings may not be applicable to all airplane configurations or operators.
K. Publications Changed Publication Chapter-Section 757 Maintenance Manual 52-71 757 Wiring Diagram Manual 52-71-11, 52-71-21 757 Illustrated Parts Catalog 25-65, 52-71 L. Interchangeability and Intermixability of Parts Refer to Paragraph 2.E., Existing Parts Accountability, for interchangeability and intermixability information.
October 10, 1996 757-25-0182 Revision 2: January 11, 2001 6
BOEING SERVICE BULLETIN 757-25-0182
2. MATERIAL INFORMATION A. Material - Price and Availability The operator can supply the parts and materials shown in the kits in Paragraph 2.C., Parts Necessary For Each Airplane. As an alternative, operators can purchase the kit from Boeing Spares. The Boeing price data shown below is given for planning purposes. Supply data can be given if requested.
Kit Number Name Unit Price thru April 30,2001 012N8928-1 Top Kit No Longer Active 012N8928-2 Subkit No Longer Active 012N8928-3 Subkit No Longer Active 012N8928-4 Subkit No Longer Active 012N8928-51 * Top Kit No Longer Active 012N8928-53 Subkit No Longer Active 012N8928-54 Subkit No Longer Active 012N8928-55 * Supplemental Top Kit No Longer Active 012N8928-97 Top Kit $ 2,786.00 012N8928-2 Subkit $ 1,289.00 012N8928-98 Subkit $ 767.00 012N8928-99 Subkit $ 730.00 012N8928-100 Supplemental Top Kit $ 1,036.00 * Top Kit 012N8928-51 and Supplemental Kit 012N8928-55 were released prior to release of Revision 2 of this service bulletin. Operators who have procured these kits should combine the parts in these kits with parts in Supplemental Kit 012N8928-100 to create a kit equivalent to Top Kit 012N8928-97.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment. After the Unit Price date, new price data is applicable. Prices are in United States dollars. Terms: Net 30 days.
Send purchase orders and letters about the supply data to the Director of Spares and refer to this service bulletin number.
B. Industry Support Information Boeing warranty remedies are not available for the configuration changes given in this service bulletin. However, the 012N8928-100 Supplemental Top Kit will be supplied at no-charge to operators who have previously purchased the 012N8928-1 or -51 Top Kits.
October 10, 1996 757-25-0182 Revision 2: January 11, 2001 7
BOEING SERVICE BULLETIN 757-25-0182 C. Parts Necessary For Each Airplane
1. Kits:
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the Operator, are necessary for each airplane.
To get the kit shown below, refer to Paragraph 2.A., Material - Price and Availability.
012N8928 TOP KIT - MODIFICATION OF DOOR LATCH SYSTEM AND SENSOR
INSTALLATION -100 -99 -98 -97 Quantity Part Number Name . . . - 012N8928-97 Top Kit - Modification of Door Latch System and Sensor Installation . . . 1 012N8928-2 Subkit - Modification of Door Latch System . . - 1 012N8928-98 (a) Subkit - Movement of Sensor Proximity Switch . - . 1 012N8928-99 (a) Subkit - Movement of Sensor Target
- . . . 012N8928-100 (a) Supplemental Top Kit 1 . 1 . 284N1085-19 Bracket Assembly, Left Side 1 . 1 . 284N1085-20 Bracket Assembly, Right Side 1 1 . . 284N1085-27 Target, Left Side 1 1 . . 284N1085-28 Target, Right Side 4 . 4 . 284N1641-4 Shim . . 8 . BACB30MY5K3X Bolt, Hi-Lok, 1/64 OS 5 - 5 . BACB30NX6K3X (Optional:
BACB30MY6K3X) Bolt, Hi-Lok, 1/64 OS . 5 . . BACB30NY6K4 Bolt, Hi-Lok . 5 . . BACB30NY6K5 Bolt, Hi-Lok . 5 . . BACB30NY6K6 Bolt, Hi-Lok . . 8 . BACC30M5 Collar 5 15 5 . BACC30X6S Collar (Optional BACC30M6) Collar (These collars are only used when optional Bolt BACB30MY6K3X is used) . 3 . . BACF3F003J017NN Filler . 3 . . BACF3H07GK013HG Radius Filler . . 2 . BACG20AF2C1J Grommet . . 3 . BACR15BA5D8 Rivet . . 10 . BACR15BB6D6 Rivet . . 6 . BACR15BA6D8 Rivet
- - 4 BACR15ET6D8 Rivet . . 1 . BAC27NEX1832 Aluminum Foil Marker, Left Side . . 1 . BAC27NEX1833 Aluminum Foil Marker, Right Side . . 5 . NAS1801-3-7 Screw
(a) The kit has more parts than are necessary for installation. Discard parts that are not used or keep the parts for spares.
October 10, 1996 757-25-0182 Revision 2: January 11, 2001 8