TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '50102b3c41c0f5ff5080f23523b434dbcc9fe9913c7ea3dc94db4c2f31ea00b6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '50102b3c41c0f5ff5080f23523b434dbcc9fe9913c7ea3dc94db4c2f31ea00b6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 757 Service Bulletin Number: 757-28-0118 Original Issue: January 12, 2012 ATA System: 2811 SUBJECT: FUEL - Fuel Tanks - Access Door Inspection/Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 730-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET Copyright © 2012 The Boeing Company Unpublished Work - All Rights Reserved Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 1 of 20
13.0
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 2 of 20 BOEING SERVICE BULLETIN 757-28-0118
BLANK PAGE
Table of Contents
Summary5
1. PLANNING INFORMATION7
A. Effectivity7
1. Airplanes7
2. Spares Affected8
B. Concurrent Requirements8
C. Reason8
D. Description8
E. Compliance9
F. Approval9
G. Manpower9
H. Weight and Balance Changes .................................... 1 0 I. Electrical Load Data ......................................... 1 0 J. References .............................................. 1 0
1. Existing Data: ......................................... 1 0
2. Data supplied with this Service Bulletin: ........................... 1 0
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 0 K. Publications Affected ........................................ 1 0 L. Interchangeability and Intermixability of Parts ........................... 1 0
2. MATERIAL INFORMATION ........................................ 1 1 A. Material - Price and Availability ................................... 1 1 B. Industry Support Information .................................... 1 1 C. Parts Necessary For Each Airplane ................................. 1 1
1. Kits/Parts: ........................................... 1 1
2. Parts and Materials Supplied by the Operator: ........................ 1 1
3. Parts Modified and Reidentified: ............................... 1 1
4. Parts Removed and Not Replaced: .............................. 1 1 D. Parts Necessary to Change Spares ................................. 1 1 E. Special Tooling - Price and Availability ............................... 1 1 F. Special Tooling Necessary to do this Service Bulletin ....................... 1 1
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 3 A. GENERAL INFORMATION ..................................... 1 3 B. WORK INSTRUCTIONS ....................................... 1 3 FIGURE 1: ACCESS DOOR INSPECTION - LEFT WING ........................ 1 5 FIGURE 2: ACCESS DOOR INSPECTION - RIGHT WING ....................... 1 7 APPENDIX A: GENERAL VISUAL INSPECTION PROCEDURE ...................... 1 9
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 3 of 20 BOEING SERVICE BULLETIN 757-28-0118
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 4 of 20 BOEING SERVICE BULLETIN 757-28-0118
BLANK PAGE
Commercial Airplanes 757 Service Bulletin SummaryNumber: 757-28-0118Original Issue: January 12, 2012 ATA System: 2811 SUBJECT: FUEL - Fuel Tanks - Access Door Inspection/Replacement
CONCURRENT REQUIREMENTS Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND This service bulletin provides instructions to inspect the Wing Fuel Tank Access Doors to make sure that Impact Resistant Access Doors are installed in the correct locations and stencils and index markers are applied. Fire can result from damage to a standard access door if it is located where an Impact Resistant Access Door is required.
An operator identified a standard access door located where an Impact Resistant Access Door is required. In addition, the operator examined its spares stock and found that some Impact Resistant Access Doors were without stencils. These findings have raised a concern about the possibility of more standard access doors being installed at locations where Impact Resistant Access Doors are required. Impact Resistant Access Doors minimize risk of penetration from engine debris or objects thrown by airplane tires. By accomplishing the inspection in this service bulletin, operators can make sure that stencils and index markers are applied and Impact Resistant Access Doors are installed at the correct locations, providing increased resistance to Wing Fuel Tank penetration.
Boeing Service Related Problem (SRP) 757-SRP-57-0225 is related to this service bulletin.
ACTION Identify the Wing Fuel Tank Access Doors. Do a General Visual Inspection to make sure that Impact Resistant Access Doors are installed in the correct locations. If a standard access door is identified in a location where an Impact Resistant Access Door is required, replace the door with an Impact Resistant Access Door. Do a General Visual Inspection to make sure that stencils and index markers are applied. If a stencil and/or index marker is missing, apply new stencil and/or index marker.
EFFECTIVITY 757-200/200PF airplanes.
Refer to Paragraph 1.A.1, Effectivity.
COMPLIANCE Refer to Paragraph 1.E., Compliance.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 5 of 20
BOEING SERVICE BULLETIN 757-28-0118
INDUSTRY SUPPORT INFORMATION Refer to Paragraph 2.B., Industry Support Information.
MANPOWER Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION Refer to Paragraph 2.A., Material - Price and Availability.
IDENTIFY THE WING FUEL TANK ACCESS DOORS. DO THE INSPECTION OF THE WING
FUEL TANK ACCESS DOORS TO MAKE SURE THAT IMPACT RESISTANT ACCESS DOORS
ARE INSTALLED IN THE CORRECT LOCATIONS AND THAT STENCILS AND INDEX MARKERS ARE APPLIED. IF A STANDARD ACCESS DOOR IS IDENTIFIED IN A LOCATION WHERE AN
IMPACT RESISTANT ACCESS DOOR IS REQUIRED, REPLACE THE DOOR WITH AN IMPACT RESISTANT ACCES DOOR. IF ANY STENCIL AND/OR INDEX MARKER IS MISSING, APPLY
NEW STENCIL AND/OR INDEX MARKER = 7 900 LEFT WING SHOWN 1834248 (RIGHT WING OPPOSITE) Original Issue: January 12, 2012 757-28-0118
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 20
Commercial Airplanes 757 Service Bulletin Number: 757-28-0118 Original Issue: January 12, 2012 ATA System: 2811 SUBJECT: FUEL - Fuel Tanks - Access Door Inspection/Replacement
1. PLANNING INFORMATION A. Effectivity
1. Airplanes Refer to Service Bulletin Index Document D6-30300 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP 757 airplanes Line Numbers 1 through 180.-1 Airplane Models:
757-200, 757-200PF GroupVariable Number 1NA001 - NA028 1NA191 - NA197 1NA201 - NA233 1NA391 - NA394 1NA401 - NA408 1NA441 - NA443 1NA447 1NA501 - NA538 1NB001 - NB004 1NB021 - NB023 1NB036 - NB038 1NB051 - NB053
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 7 of 20
GroupVariable Number 1NB061 - NB063 1NB071 - NB073 1NC001 - NC028 1NC041 - NC042 1NC901 - NC906 1ND001 - ND002 1ND891
2. Spares Affected None.
B. Concurrent Requirements The service bulletin listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany Main and center tank access door replacement757-28-0019 Revision 1Boeing C. Reason This service bulletin provides instructions to inspect the Wing Fuel Tank Access Doors to make sure that Impact Resistant Access Doors are installed in the correct locations and stencils and index markers are applied. Fire can result from damage to a standard access door if it is located where an Impact Resistant Access Door is required.
An operator identified a standard access door located where an Impact Resistant Access Door is required. In addition, the operator examined its spares stock and found that some Impact Resistant Access Doors were without stencils. These findings have raised a concern about the possibility of more standard access doors being installed at locations where Impact Resistant Access Doors are required.
Impact Resistant Access Doors minimize risk of penetration from engine debris or objects thrown by airplane tires. By accomplishing the inspection in this service bulletin, operators can make sure that stencils and index markers are applied and Impact Resistant Access Doors are installed at the correct locations, providing increased resistance to Wing Fuel Tank penetration.
Boeing Service Related Problem (SRP) 757-SRP-57-0225 is related to this service bulletin.
D. Description Identify the Wing Fuel Tank Access Doors. Do a General Visual Inspection to make sure that Impact Resistant Access Doors are installed in the correct locations. If a standard access door is identified in a location where an Impact Resistant Access Door is required, replace the door with an Impact Resistant Access Door. Do a General Visual Inspection to make sure that stencils and index markers are applied.
If a stencil and/or index marker is missing, apply new stencil and/or index marker.
The work in this service bulletin is done in the maintenance zone(s) given below.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 8 of 20 BOEING SERVICE BULLETIN 757-28-0118
Affected Maintenance Zones ZoneModel 531, 541, 631, 641757-200, 757-200PF E. Compliance The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.
Boeing recommends that the inspection given in this service bulletin be done within 72 months after the original issue date of this service bulletin.
F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.
G. Manpower The table below shows an estimate of the man-hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by experienced crews. Adjust the estimate with operator man-hour data if necessary. The estimate does not include lost time. These are examples of lost time:
— Time to adjust to the workplace — Time to schedule the work — Time to examine the work — Time to cure the materials — Time to make the parts — Time to find the tools.
Group 1:
MAN-HOURS FOR GENERAL VISUAL INSPECTION PROCEDURE More DataElapsed HoursTask HoursNumber of PersonsTask
(a)4.04.01Figure 1
(a)4.04.01Figure 2
(a)8.08.0TOTAL FOR EACH AIRPLANE
(a) Does not include time to defuel/refuel.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 9 of 20 BOEING SERVICE BULLETIN 757-28-0118
H. Weight and Balance Changes None I. Electrical Load Data Not applicable J. References
1. Existing Data:
a. Boeing Service Bulletin 757-28-0019
b. Boeing Service Related Problem (SRP) 757-SRP-57-0225
c. Standard Overhaul Practices Manual (SOPM) 20-50-10
d. 757 Aircraft Maintenance Manual (AMM) 28-11-01, 28-11-02, 28-26-00
e. 757 Illustrated Parts Catalog (IPC) 28-11-01, 28-11-02
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
NomenclatureEngineering Drawing DOOR INSTL - FUEL TANK ACCESS, IMPACT RESISTANT112N6000 K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability information.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 10 of 20 BOEING SERVICE BULLETIN 757-28-0118
2. MATERIAL INFORMATION A. Material - Price and Availability Refer to Paragraph 2.C., Parts Necessary For Each Airplane.
B. Industry Support Information Boeing warranty remedies are available for 757 airplanes in warranty as of June 19, 2008. For inspection man-hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Warranty & Product Assurance Contracts. If the condition described in this service bulletin is found during the initial inspection for airplanes in warranty as of that date and additional man-hours or parts are required, send a warranty claim to Boeing Warranty & Product Assurance Contracts. Warranty remedies are not available for continued inspections as described in this Service Bulletin as these actions are considered routine maintenance.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None
2. Parts and Materials Supplied by the Operator:
Refer to Illustrated Parts Catalog (IPC) 757 IPC 28-11-01, 757 IPC 28-11-02
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None D. Parts Necessary to Change Spares None E. Special Tooling - Price and Availability None F. Special Tooling Necessary to do this Service Bulletin No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 11 of 20 BOEING SERVICE BULLETIN 757-28-0118
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: January 12, 2012 757-28-0118 12 of 20 BOEING SERVICE BULLETIN 757-28-0118