TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a566d4f4306a31d0b80f8efde493e24075dacc24e8a08b127a5737a21fe5e5cc' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a566d4f4306a31d0b80f8efde493e24075dacc24e8a08b127a5737a21fe5e5cc' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 757 Service Bulletin
SPECIAL ATTENTION Number: 757-53-0097 Original Issue: November 22, 2010 Revision 3: December 02, 2016 ATA System: 5300 SUBJECT: FUSELAGE - Skin - Crown Skin Panel - Station 297 to Station 439, Chem-Milled Steps Between Stringer 4 Left and Stringer 4 Right Lap Joints - Inspection and Modification Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2010 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 1 of 198
2.0
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 2 of 198 BOEING SERVICE BULLETIN 757-53-0097
BLANK PAGE
Table of Contents
Revision Transmittal Sheet7
S u m m a r y9
1. PLANNING INFORMATION ........................................ 1 5 A . E f f e c t i v i t y ............................................... 1 5
1. Airplanes ............................................ 1 5 2 . S p a r e s A f f e c t e d ........................................ 1 9 B. Concurrent Requirements ...................................... 1 9 C. Reason ................................................ 1 9 D. Description .............................................. 2 0 E. Compliance .............................................. 2 1 F . A p p r o v a l ............................................... 2 9 G. Manpower .............................................. 2 9 H. Weight and Balance Changes .................................... 3 5 I. Electrical Load Data ......................................... 3 5 J . R e f e r e n c e s .............................................. 3 5
1. Existing Data: ......................................... 3 5
2. Data Supplied with this Service Bulletin: ........................... 3 5
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 6 K. Publications Affected ........................................ 3 6 L. Interchangeability and Intermixability of Parts ........................... 3 6 M. Software Accomplishment Summary ................................ 3 6
2. MATERIAL INFORMATION ........................................ 3 7 A. Material - Price and Availability ................................... 3 7 B. Industry Support Information .................................... 3 8 C. Parts Necessary for Each Airplane ................................. 3 8 1 . K i t s / P a r t s ............................................ 3 8
2. Parts and Materials Supplied by the Operator ........................ 3 8
3. Parts Modified and Reidentified ................................ 4 1
4. Parts Removed and Not Replaced .............................. 4 1 D. Parts Necessary to Change Spares ................................. 4 1 E. Special Tooling - Price and Availability ............................... 4 1 F. Special Tooling Necessary to do this Service Bulletin ....................... 4 1
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 3 A. GENERAL INFORMATION ..................................... 4 3 B. WORK INSTRUCTIONS ....................................... 4 4 F I G U R E 1 : T H I S F I G U R E W A S D E L E T E D A T R E V I S I O N 2 ....................... 5 8 FIGURE 2: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 1 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 1-2] ................................... 5 9 FIGURE 3: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 1 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 1-2] ................................... 6 2 FIGURE 4: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 1 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 3] .................................... 6 5 FIGURE 5: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 1 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 3] .................................... 6 8 FIGURE 6: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 2 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 1, 3] ................................... 7 1 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 3 of 198 BOEING SERVICE BULLETIN 757-53-0097
FIGURE 7: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 2 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 2] .................................... 7 4 FIGURE 8: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 2 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 1, 3] ................................... 7 7 FIGURE 9: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 2 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 2] .................................... 8 0 FIGURE 10: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 3 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 1] .................................... 8 3 FIGURE 11: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 3 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 2] .................................... 8 6 FIGURE 12: STA 297 TO STA 418 CROWN SKIN PANEL - ZONE 3 - EXTERNAL SLIDING PROBE EC INSPECTION [Group 3] .................................... 8 9 FIGURE 13: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 3 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 1] .................................... 9 2 FIGURE 14: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 3 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 2] .................................... 9 5 FIGURE 15: STA 297 TO STA 418 CROWN SKIN PANEL - ZONE 3 - EXTERNAL SPOT PROBE MFEC INSPECTION [Group 3] .................................... 9 8 FIGURE 16: S-4L - STA 297 THRU STA 324 - REMOVAL OF FASTENERS AND OPEN HOLE INSPECTION ................................................. 1 0 1 FIGURE 17: S-4L - STA 297 THRU STA 324 - MANUFACTURE OF PREVENTIVE MODIFICATION PARTS ................................................. 1 0 3 FIGURE 18: S-4L - STA 297 THRU STA 324 - INSTALLATION OF PREVENTIVE MODIFICATION . 105 FIGURE 19: S-4L - STA 377.7 THRU STA 439 - REMOVAL OF FASTENERS AND OPEN HOLE INSPECTION [Group 1-2] .......................................... 1 0 8 FIGURE 20: S-4L - STA 377.7 THRU STA 439 - MANUFACTURE OF PREVENTIVE MODIFICATION PARTS [Group 1-2] .......................................... 1 1 2 FIGURE 21: S-4L - STA 377.7 THRU STA 439 - INSTALLATION OF PREVENTIVE MODIFICATION [Group 1 - 2 ] ............................................... 1 1 6 FIGURE 22: S-4R - STA 297 THRU STA 439 - REMOVAL OF FASTENERS AND OPEN HOLE INSPECTION [Group 1-2] .......................................... 1 2 1 FIGURE 23: S-4R - STA 297 THRU STA 439 - MANUFACTURE OF PREVENTIVE MODIFICATION PARTS [Group 1-2] .......................................... 1 2 8 FIGURE 24: S-4R - STA 297 THRU STA 439 - INSTALLATION OF PREVENTIVE MODIFICATION [Group 1 - 2 ] ............................................... 1 3 5 FIGURE 25: S-4L - STA 377.7 THRU STA 418 - REMOVAL OF FASTENERS AND OPEN HOLE INSPECTION [Group 3] ............................................ 1 4 3 FIGURE 26: S-4L - STA 377.7 THRU STA 418 - MANUFACTURE OF PREVENTIVE MODIFICATION PARTS [Group 3] ............................................ 1 4 6 FIGURE 27: S-4L - STA 377.7 THRU STA 418 - INSTALLATION OF PREVENTIVE MODIFICATION [Group 3 ] ................................................ 1 4 9 FIGURE 28: S-4R - STA 297 THRU STA 439 - REMOVAL OF FASTENERS AND OPEN HOLE INSPECTION [Group 3] ............................................ 1 5 4 FIGURE 29: S-4R - STA 297 THRU STA 439 - MANUFACTURE OF PREVENTIVE MODIFICATION PARTS [Group 3] ............................................ 1 6 1 FIGURE 30: S-4R - STA 297 THRU STA 439 - INSTALLATION OF PREVENTIVE MODIFICATION [Group 3 ] ................................................ 1 6 8 FIGURE 31: POST MODIFICATION INSPECTION REQUIREMENTS [Group 1-2] ........... 1 7 6 FIGURE 32: POST MODIFICATION INSPECTION REQUIREMENTS [Group 3] ............ 1 7 9 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 4 of 198 BOEING SERVICE BULLETIN 757-53-0097
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE1: STA 297 TO STA 439 CROWN SKIN PANEL – ZONE 1 – INSPECTIONS AND PREVENTIVE MODIFICATION . 184 APPENDIX B: LOGIC DIAGRAM FOR: TABLE 2: STA 297 TO STA 439 CROWN SKIN PANEL - ZONE 2 - INSPECTIONS ........................................ 1 8 8 APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 3: STA 297 TO STA 439 CROWN SKIN PANEL – ZONE 3 - INSPECTIONS ..................... 1 9 2 APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 4: STA 297 TO STA 439 CROWN SKIN PANEL – POST PREVENTIVE MODIFICATION SUPPLEMENTAL INSPECTIONS ................................................. 1 9 6 APPENDIX E: PART DEMAND INTENT ................................... 1 9 8 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 5 of 198 BOEING SERVICE BULLETIN 757-53-0097
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 6 of 198 BOEING SERVICE BULLETIN 757-53-0097
BLANK PAGE
Commercial Airplanes 757 Service Bulletin
SPECIAL ATTENTION Revision Transmittal SheetNumber: 757-53-0097Original Issue: November 22, 2010 Revision 3: December 02, 2016 ATA System: 5300 SUBJECT: FUSELAGE - Skin - Crown Skin Panel - Station 297 to Station 439, Chem-Milled Steps Between Stringer 4 Left and Stringer 4 Right Lap Joints - Inspection and Modification This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2015-NM-143-AD, is related to this service bulletin.
Effects of this Revision on airplanes on which the Original Issue, Revision 1 or Revision 2 was previously done:
ActionConditionGroup Compliance time thresholds and grace periods have been changed. Do the required actions at the times specified in Paragraph
1.E., Compliance.
Airplanes on which the Original Issue, Revision 1 or Revision 2 was previously done.
All
REASON FOR REVISION This revision is sent to change the threshold and grace period for Zone 1 inspections.
These sections were changed:
1. Summary, Background: Updated Background paragraph, and added Service Related Problem (SRP) and Fleet Team Digest (FTD) reference information.
2. Summary, Compliance: Added Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM) reference information.
3. Paragraph 1.C, Reason: Updated Reason paragraph, and added Service Related Problem (SRP) and Fleet Team Digest (FTD) reference information.
4. Paragraph 1.D, Description: Added information about the effects of this revision on airplanes that previously accomplished this service bulletin.
5. Paragraph 1.E, Compliance: Added Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM) reference information. Changed the threshold and grace period for Zone 1 inspections.
Added reference to footnote (d) to both options for Condition 1, Action 2.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 7 of 198
6. Paragraph 1.J, References: Added new SRP, FTD and NPRM reference information.
7. Paragraph 1.K, Publications Affected: Changed Damage Tolerance Based Structural Inspections information.
8. Paragraph 2.A, Material - Price and Availability: Added new ROLT and updated Price information.
9. Paragraph 3.A General Information: Item 15 updated for Work Instruction step or sub-step labeling as "RC Exempt".
10. Paragraph 3.B Work Instructions: Changed to clarify "RC" requirement. Added RC Exempt sub-steps to PARTs 1, 2, 4, 5, 6 and 7 to do optional NDT manual crack confirmation procedure, and to keep cracked skin after removal for further examination by The Boeing Company. Added step to put the airplane back to a serviceable condition.
11. Figures 2, 4, 6, 7, 10, 11, and 12: Added footnote to recommend doing optional NDT manual crack confirmation procedure.
12. Figures 2 through 15: Added footnote to recommend keeping cracked skin after removal for further examination by The Boeing Company.
13. Figures 16, 19, 22, 25 and 28: Changed footnote (a) information.
14. Figure 22 and Figure 25: Added reference to footnote (a) in the step table.
15. Appendix A: Updated to match Compliance Table 1.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes, to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY November 22, 2010Original Issue:
January 06, 2011Revision 1:
July 28, 2015Revision 2:
December 02, 2016Revision 3:
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 8 of 198 BOEING SERVICE BULLETIN 757-53-0097
Commercial Airplanes 757 Service Bulletin
SPECIAL ATTENTION SummaryNumber: 757-53-0097Original Issue: November 22, 2010 Revision 3: December 02, 2016 ATA System: 5300 SUBJECT: FUSELAGE - Skin - Crown Skin Panel - Station 297 to Station 439, Chem-Milled Steps Between Stringer 4 Left and Stringer 4 Right Lap Joints - Inspection and Modification BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS None.
BACKGROUND Four operators reported cracks on eight airplanes, between 15,700 and 24,900 total flight cycles, in the Body Station (STA) 297 to STA 439 crown skin panel. The cracks are attributed to fatigue. Cracks may initiate at multiple locations on the interior surface, along the chem-milled step edges above the stringer 4L or 4R lap splices of the skin, or above and below the stringers 3L, 2L, 1, 2R or 3R in the skin. Without inspection for cracks, multiple site cracks could link together and rapidly progress through the skin. A long crack could result in pressure venting and a controlled decompression of the airplane.
One reported crack was 10.75-inches long midway between STA 420 and STA 439. The crack was just above the lap joint at stringer 4L common to the chem-milled step. The airplane had 24,631 flight cycles. On another airplane the operator reported an opening in the fuselage approximately 12 inches by 18 inches above and aft of the passenger entry doorway. One edge of the opening was common to the chem-milled step above stringer 4L. Additionally a 1.3 Inch crack was found in the skin forward of the opening in the adjacent skin bay also in the chem-milled step above stringer 4L. The airplane had 22,450 flight cycles.
The cracks occur along locally thinned channels adjacent to the chem-mill steps. This local thinning occurs during the chem-mill process and additional information has shown that thin channels are also present along the edges of the chem-milled pockets adjacent to stringers 3L, 2L, 1, 2R and 3R.
This service bulletin gives inspections of the crown skin panel for cracks along all the chem-milled pocket edges between stringers 4L and 4R, and between Body Stations 297 and 439. Accomplishment of this service bulletin will make sure that cracks are found and repaired. This service bulletin allows inspections above the lap splices at Stringer 4L and 4R to be terminated if a preventive modification is installed. This service bulletin also allows all inspections to be terminated if the entire skin panel is replaced with a new production skin panel between Stringer 4L and 4R, and body stations 297 and 439.
Boeing Service Related Problem (SRP) 757-SRP-53-0368 and 757-SRP-53-0526 are related to this service bulletin.
Boeing Fleet Team Digest (FTD) 757 FTD 53-10001 is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 9 of 198
This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.
ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., Compliance and Paragraph
1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataNoElectrical Load Changed Paragraph 1.K., Publications AffectedNoPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsNoKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION Get access to the exterior of the skin between the stringers 4L and 4R and between STA 297 and STA 439. Do either a sliding probe external Eddy Current (EC) or a spot probe Medium Frequency Eddy Current (MFEC) for cracks of the STA 297 to STA 439 crown skin panel at the edge of the chem-milled pockets at stringer S-4L and S-4R lap joints and both sides of the stringers at S-3L to S-3R as described and at the times specified in Paragraph
1.E., Compliance. If any crack is found, contact The Boeing Company for repair instructions and do the repair.
Repeat the sliding probe EC, spot probe MFEC inspection at the times given in Paragraph 1.E., Compliance.
At the operators option, get access to the interior of the skin lap joints at stringers 4L and 4R, between STA 297 and STA 439 and do the preventive modification. If the ZONE 1 preventive modifications are installed, do post modification LFEC and detailed inspections for cracks in the upper and lower skins common to the preventive modification parts.
At the operators option, contact The Boeing Company for instructions to replace the crown skin panel between stringers S-4L and S-4R, and, STA 297 and STA 439.
EFFECTIVITY 757-200 and 757-300 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE Federal Aviation Administration (FAA) Airworthiness Directive AD 2011-01-15 is related to this service bulletin.
Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2015-NM-143-AD, is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 10 of 198 BOEING SERVICE BULLETIN 757-53-0097
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION Boeing warranty remedies are available for 757 airplanes in warranty as of October 1, 2010. Please refer to Paragraph 2.B., Industry Support Information.
MANPOWER Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION None.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 22, 2010 757-53-0097Revision 3: December 02, 2016 11 of 198 BOEING SERVICE BULLETIN 757-53-0097
BOEING SERVICE BULLETIN 757-53-0097 STA 439 STA 297 00000
CHEM-MILL-EDGE
FRAME INSPECT FOR CRACKS IN THE
CROWN SKIN BETWEEN STATION 297 AND STATION 439 AT THE CHEM-MILLED
POCKET EDGE ABOVE THE LAP JOINT AT S-4L AND S-4R.
OPTIONAL: INSTALL
PREVENTIVE MODIFICATION AT S-4L AND S-4R, OR INSTALL
REPLACEMENT CROWN SKIN PANEL NMOHO NIXS
INSPECTION AREA STRINGER 4
LOWER SKIN INSPECTION 2034160 AREA TYPICAL CROWN SKIN CHEM-MILLED POCKET EDGE ABOVE S-4 LAP SPLICE Original Issue: November 22, 2010 Revision 3: December 02, 2016 Export Controlled ECCN: 9E991 - BOING 757-53-0097 PROPRIETARY - Copyright ® Unpublished Work - See page 1 for details. 12 of 198