Copy · SB-767-22-0143-02-- · 354 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-7525; AD 2016-25-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'a995e9c16a80f1b42162b38e27cdbb59cb140cc479d6a1251b3c1e7e925ba5cc'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 767 Service Bulletin

SPECIAL ATTENTION Number: 767-22-0143 Original Issue: March 06, 2015 Revision 2: May 25, 2016 ATA System: 2212 2222 3209 SUBJECT: AUTOFLIGHT - Automatic Stabilizer Trim System - On-ground Stabilizer Autotrim Inhibit System Installation Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET Copyright © 2015 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 1 of 354

3.0

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 2 of 354 BOEING SERVICE BULLETIN 767-22-0143

BLANK PAGE

Table of Contents

Revision Transmittal Sheet7

Summary11

1. PLANNING INFORMATION17

A. Effectivity17

1. Airplanes17

2. Spares Affected27

B. Concurrent Requirements27

C. Reason27

D. Description28

E. Compliance31

F. Approval31

G. Manpower31

H. Weight and Balance Changes44

I. Electrical Load Data45

J. References46

1. Existing Data:46

2. Data Supplied with this Service Bulletin:47

3. Installation Drawings Used in the Preparation of this Service Bulletin:47

K. Publications Affected48

L. Interchangeability and Intermixability of Parts48

M. Software Accomplishment Summary48

2. MATERIAL INFORMATION49

A. Material - Price and Availability49

B. Industry Support Information62

C. Parts Necessary for Each Airplane62

1. Kits/Parts62

2. Parts and Materials Supplied by the Operator111

3. Parts Modified and Reidentified112

4. Parts Removed and Not Replaced112

D. Parts Necessary to Change Spares112

E. Special Tooling - Price and Availability113

F. Special Tooling Necessary to do this Service Bulletin113

3. ACCOMPLISHMENT INSTRUCTIONS115

A. GENERAL INFORMATION115

B. WORK INSTRUCTIONS117

FIGURE 1: MAIN EQUIPMENT CENTER - LEFT SIDE E1 SHELF - SUPPORT SWITCH INSTALLATION

[Group 1-17, 19, Configuration 1]127

FIGURE 2: MAIN EQUIPMENT CENTER - E1-4 ELECTRONICS SHELF - RELAY BRACKET INSTALLATION

[Group 1, 3-18, Configuration 1]132

FIGURE 3: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - RELAY BRACKET INSTALLATION

[Group 1, 3-18, Configuration 1]136

FIGURE 4: MAIN EQUIPMENT CENTER - E1-3 ELECTRONICS SHELF - RELAY BRACKET INSTALLATION

[Group 2, Configuration 1]140

FIGURE 5: MAIN EQUIPMENT CENTER - E1-6 ELECTRONICS SHELF - RELAY BRACKET INSTALLATION

[Group 2, Configuration 1]144

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 3 of 354 BOEING SERVICE BULLETIN 767-22-0143

FIGURE 6: MAIN EQUIPMENT CENTER - E1-1 ELECTRONICS SHELF - WIRE BUNDLES W0101 AND

W0121 INSTALLATION [Group 1, 3-18, Configuration 1]148

FIGURE 7: MAIN EQUIPMENT CENTER - E1-1 ELECTRONICS SHELF - WIRE BUNDLES W0101 AND

W0121 CHANGE [Group 1, 3-4, 6-9, 11-12, 16, 18, Configuration 1]149

FIGURE 8: MAIN EQUIPMENT CENTER - E1-1 ELECTRONICS SHELF - WIRE BUNDLES W0101 AND

W0121 CHANGE [Group 5, 13-15, Configuration 1]151

FIGURE 9: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLES W1092, W1096

AND W1100 INSTALLATION [Group 1, 3-18, Configuration 1]153

FIGURE 10: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLES W1092, W1096

AND W1100 CHANGES [Group 1, 5, 9, 11-16, Configuration 1]157

FIGURE 11: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLES W1092, W1096

AND W1100 CHANGES [Group 4, Configuration 1]160

FIGURE 12: MAIN EQUIPMENT CENTER - E1-4 ELECTRONICS SHELF - WIRE BUNDLES W0107 AND

W0127 INSTALLATION [Group 1, 3-18, Configuration 1]163

FIGURE 13: MAIN EQUIPMENT CENTER - E1-4 ELECTRONICS SHELF - WIRE BUNDLES W0107 AND

W0127 CHANGES [Group 1, 5-8, 11-16, Configuration 1]166

FIGURE 14: MAIN EQUIPMENT CENTER - E1-4 ELECTRONICS SHELF - WIRE BUNDLES W0107 AND

W0127 CHANGES [Group 3-4, 18, Configuration 1]170

FIGURE 15: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - WIRE BUNDLES W0119 AND

W0129 INSTALLATION [Group 1, 3-18, Configuration 1]174

FIGURE 16: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - WIRE BUNDLES W0119 AND

W0129 CHANGES [Group 1, 5-9, 12-15, Configuration 1]177

FIGURE 17: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - WIRE BUNDLES W0119 AND

W0129 CHANGES [Group 3-4, 18, Configuration 1]180

FIGURE 18: MAIN EQUIPMENT CENTER - BETWEEN E1-2, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLE W1513 AND W1523 INSTALLATION [Group 1, 3-10, 12, 15-18, Configuration

1]183

FIGURE 19: MAIN EQUIPMENT CENTER - BETWEEN E1-2, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLE W1513 AND W1523 CHANGES [Group 1, 5-10, 12, 15-17, Configuration 1]

.185

FIGURE 20: MAIN EQUIPMENT CENTER - BETWEEN E1-2, E1-4 AND E1-5 DISCONNECT PANELS -

WIRE BUNDLE W1513 AND W1523 CHANGES [Group 3-4, 18, Configuration 1]187

FIGURE 21: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1 AND E1-4 DISCONNECT PANELS - WIRE BUNDLE W0201 INSTALLATION [Group 1, 3-18, Configuration 1] . . . 189 FIGURE 22: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1 AND E1-4 DISCONNECT PANELS - WIRE BUNDLE W0201 CHANGES [Group 1, 5-11, 14, 16-17, Configuration 1] . 195 FIGURE 23: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1 AND E1-4 DISCONNECT

PANELS - WIRE BUNDLE W0201 CHANGES [Group 3-4, 18, Configuration 1]198

FIGURE 24: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLES W1521 AND W1541 INSTALLATION [Group 1,

3-10, 12, 15-18, Configuration 1]201

FIGURE 25: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLES W1521 AND W1541 CHANGES [Group 1, 3-8, 12,

15-16, 18, Configuration 1]208

FIGURE 26: MAIN EQUIPMENT CENTER - E1-1 ELECTRONICS SHELF - WIRE BUNDLE W1637

INSTALLATION [Group 2, 19, Configuration 1]211

FIGURE 27: MAIN EQUIPMENT CENTER - E1-1 ELECTRONICS SHELF - WIRE BUNDLE W1637 CHANGES

[Group 2, 19, Configuration 1]213

FIGURE 28: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLE W1092 / W1100

INSTALLATION [Group 2, 19, Configuration 1]215

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 4 of 354 BOEING SERVICE BULLETIN 767-22-0143

FIGURE 29: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLE W1092 AND

W1100 CHANGES [Group 2, Configuration 1]219

FIGURE 30: MAIN EQUIPMENT CENTER - E1-3 ELECTRONICS SHELF - WIRE BUNDLE W0105

INSTALLATION [Group 2, 19, Configuration 1]222

FIGURE 31: MAIN EQUIPMENT CENTER - E1-3 ELECTRONICS SHELF - WIRE BUNDLE W0105 CHANGES

[Group 2, 19, Configuration 1]224

FIGURE 32: MAIN EQUIPMENT CENTER - E1-6 ELECTRONICS SHELF - WIRE BUNDLE W0181

INSTALLATION [Group 2, 19, Configuration 1]227

FIGURE 33: MAIN EQUIPMENT CENTER - E1-6 ELECTRONICS SHELF - WIRE BUNDLE W0181 CHANGES

[Group 2, 19, Configuration 1]230

FIGURE 34: MAIN EQUIPMENT CENTER - E2-1 ELECTRONICS SHELF - WIRE BUNDLE W0151

INSTALLATION [Group 2, 19, Configuration 1]234

FIGURE 35: MAIN EQUIPMENT CENTER - E2-1 ELECTRONICS SHELF - WIRE BUNDLE W0151 CHANGES

[Group 2, 19, Configuration 1]236

FIGURE 36: MAIN EQUIPMENT CENTER - E2-2 ELECTRONICS SHELF - WIRE BUNDLE W0143

INSTALLATION [Group 2, 19, Configuration 1]238

FIGURE 37: MAIN EQUIPMENT CENTER - E2-2 ELECTRONICS SHELF - WIRE BUNDLE W0143 CHANGES

[Group 2, 19, Configuration 1]241

FIGURE 38: MAIN EQUIPMENT CENTER - P37 ELECTRONICS PANEL - WIRE BUNDLE W0192

INSTALLATION [Group 2, 19, Configuration 1]243

FIGURE 39: MAIN EQUIPMENT CENTER - P37 ELECTRONICS PANEL - WIRE BUNDLE W0192 CHANGES

[Group 2, 19, Configuration 1]248

FIGURE 40: MAIN EQUIPMENT CENTER - BETWEEN SWITCH, E1-3 AND E1-6 ELECTRONIC SHELVES

- WIRE BUNDLE W0707 INSTALLATION [Group 2, 19, Configuration 1]250

FIGURE 41: MAIN EQUIPMENT CENTER - BETWEEN SWITCH, E1-3 AND E1-6 ELECTRONIC SHELVES

- WIRE BUNDLE W0707 CHANGES [Group 2, 19, Configuration 1]252

FIGURE 42: MAIN EQUIPMENT CENTER - BETWEEN SWITCH, E1-1, E1-2, E1-3 AND E1-6 ELECTRONIC

SHELVES - WIRE BUNDLE W0707 CHANGES [Group 2, 19, Configuration 1]255

FIGURE 43: MAIN EQUIPMENT CENTER - BETWEEN P37 ELECTRONICS PANEL AND E1-6 ELECTRONIC

SHELF - WIRE BUNDLE W0473 INSTALLATION [Group 2, 19, Configuration 1]258

FIGURE 44: MAIN EQUIPMENT CENTER - BETWEEN P37 ELECTRONICS PANEL AND E1-6 ELECTRONIC

SHELF - WIRE BUNDLE W0473 CHANGES [Group 2, 19, Configuration 1]264

FIGURE 45: MAIN EQUIPMENT CENTER - BETWEEN E1-1, E1-6, E2-1 AND E2-2 ELECTRONIC SHELVES

- WIRE BUNDLE W0121 / W1647 INSTALLATION [Group 2, 19, Configuration 1]266

FIGURE 46: MAIN EQUIPMENT CENTER - BETWEEN E1-1, E1-6, E2-1 AND E2-2 ELECTRONIC SHELVES

- WIRE BUNDLE W0121 / W1647 CHANGES [Group 2, 19, Configuration 1]268

FIGURE 47: MAIN EQUIPMENT CENTER - E1-4 ELECTRONICS SHELF - RELAY K10737 AND RELAY

CONNECTOR D11775 INSTALLATION [Group 1, 3-18, Configuration 1]270

FIGURE 48: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - RELAY K10738 AND RELAY

CONNECTOR D11772 INSTALLATION [Group 1, 3-18, Configuration 1]273

FIGURE 49: MAIN EQUIPMENT CENTER - E1-3 ELECTRONICS SHELF - RELAY K10737 AND RELAY

CONNECTOR D11775 INSTALLATION [Group 2, 19, Configuration 1]276

FIGURE 50: MAIN EQUIPMENT CENTER - E1-6 ELECTRONICS SHELF - RELAY K10738 AND RELAY

CONNECTOR D11772 INSTALLATION [Group 2, 19, Configuration 1]279

FIGURE 51: MAIN EQUIPMENT CENTER - LEFT SIDE E1 SHELF SUPPORT - SWITCH BRACKET AND

LOCKWIRE INSTALLATION [Group 1-19, Configuration 1]282

FIGURE 52: MAIN EQUIPMENT CENTER - E1-1 ELECTRONICS SHELF - WIRE BUNDLES W0101 AND

W0121 CHANGE [Group 10, 17, Configuration 1]285

FIGURE 53: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLES W1092, W1096

AND W1100 CHANGES [Group 6, 10, 17, Configuration 1]287

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 5 of 354 BOEING SERVICE BULLETIN 767-22-0143

FIGURE 54: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLES W1092, W1096

AND W1100 CHANGES [Group 3, 7, 18, Configuration 1]290

FIGURE 55: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLES W1092, W1096

AND W1100 CHANGES [Group 8, Configuration 1]293

FIGURE 56: MAIN EQUIPMENT CENTER - E1-4 ELECTRONICS SHELF - WIRE BUNDLES W0107 AND

W0127 CHANGES [Group 9-10, 17, Configuration 1]296

FIGURE 57: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - WIRE BUNDLES W0119 AND

W0129 CHANGES [Group 10, Configuration 1]300

FIGURE 58: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - WIRE BUNDLES W0119 AND

W0129 CHANGES [Group 11, Configuration 1]303

FIGURE 59: MAIN EQUIPMENT CENTER - E1-5 ELECTRONICS SHELF - WIRE BUNDLES W0119 AND

W0129 CHANGES [Group 16-17, Configuration 1]306

FIGURE 60: MAIN EQUIPMENT CENTER - BETWEEN E1-2, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLE W1523 AND W1785 INSTALLATION [Group 11, 13-14, Configuration 1] . 309 FIGURE 61: MAIN EQUIPMENT CENTER - BETWEEN E1-2, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLE W1523 AND W1785 CHANGES [Group 11, 13-14, Configuration 1] . . . 311 FIGURE 62: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E1-4 AND E1-6 DISCONNECT PANELS - WIRE BUNDLE W0201 CHANGES [Group 12-13, 15, Configuration

1]313

FIGURE 63: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E2-1, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLES W1521 AND W1541 CHANGES [Group 9,

Configuration 1]316

FIGURE 64: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E2-1, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLES W1521 AND W1541 CHANGES [Group 10, 17,

Configuration 1]319

FIGURE 65: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLES W0797 AND W1521 CHANGES [Group 11, 13-14,

Configuration 1]322

FIGURE 66: MAIN EQUIPMENT CENTER - BETWEEN SWITCH S02690, E1-1, E2-1, E1-4 AND E1-5 DISCONNECT PANELS - WIRE BUNDLES W0797 AND W1521 CHANGES [Group 11, 13-14,

Configuration 1]329

FIGURE 67: MAIN EQUIPMENT CENTER - LEFT SIDE E1 SHELF - SUPPORT SWITCH INSTALLATION

[Group 18, Configuration 1]332

FIGURE 68: MAIN EQUIPMENT CENTER - E1-3 ELECTRONICS SHELF - RELAY BRACKET INSTALLATION

[Group 19, Configuration 1]337

FIGURE 69: MAIN EQUIPMENT CENTER - E1-6 ELECTRONICS SHELF - RELAY BRACKET INSTALLATION

[Group 19, Configuration 1]341

FIGURE 70: MAIN EQUIPMENT CENTER - LEFT SIDE E1 SHELF - GENERAL VISUAL INSPECTION

[Group 1-19, Configuration 2]345

FIGURE 71: MAIN EQUIPMENT CENTER - LEFT SIDE E1 SHELF - MARKER REPLACEMENT [Group

1-19, Configuration 2]347

FIGURE 72: MAIN EQUIPMENT CENTER - LEFT SIDE E1 SHELF - MARKER IDENTIFICATION [Group

1-19, Configuration 2]349

FIGURE 73: MAIN EQUIPMENT CENTER - E1-2 ELECTRONICS SHELF - WIRE BUNDLE W1092 AND

W1100 CHANGES [Group 19, Configuration 1]351

APPENDIX A: PART DEMAND INTENT354

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 6 of 354 BOEING SERVICE BULLETIN 767-22-0143

Commercial Airplanes 767 Service Bulletin

SPECIAL ATTENTION Revision Transmittal SheetNumber: 767-22-0143Original Issue: March 06, 2015 Revision 2: May 25, 2016 ATA System: 2212 2222 3209 SUBJECT: AUTOFLIGHT - Automatic Stabilizer Trim System - On-ground Stabilizer Autotrim Inhibit System Installation This revision includes all pages of the service bulletin.

COMPLIANCE INFORMATION RELATED TO THIS REVISION Effects of this Revision on airplanes on which the Original Issue or Revision 1 was previously done:

ActionConditionGroup Do a General Visual Inspection of the marker installed adjacent to switch S02690 to make sure the switch positions are correctly identified on the marker. Do Figure 71 or Figure 72 to correct the switch positions.

Airplanes that have accomplished the Original Issue or Revision 1 of this service bulletin.

Groups 1-19

REASON FOR REVISION This revision is sent to correct errors found by operators evaluating the incorporation of the Revision 1 of the service bulletin. This revision moves airplanes to new groups because of hardware and wiring configuration differences. New top kits have been created to include new wires that were missing or too short in the existing kits. Supplemental kits have been created for operators that have already purchased the existing top kits and not accomplished this service bulletin. The new kits also change the quantity of contact pins and sockets required for installation and includes end clamps to secure terminal blocks. New work instructions have been added to inspect the part number of the marker that operators installed in the Original Issue or Revision 1 of the service bulletin. Existing figures have changed and new figures have been added due to wiring configuration differences.

As a part of a service bulletin validation program, this change was completed on airplane VB441 by Service Bulletin 767-22-0143 Revision 1 before the Revision 2 of this service bulletin. The change completed on airplane VB441 by Service Bulletin 767-22-0143 Revision 1 is equivalent to the Revision 2 of this service bulletin. Airplane VB441 has the configuration of a Group 1 airplane.

These sections were changed:

1. Summary Background and Paragraph 1.C. Reason, added validation statement.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 7 of 354

2. Summary Compliance and Paragraph 1.E. Compliance, added Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM).

3. Paragraph 1.A.1. Airplanes, airplane group changes:

a. Airplanes VA001, VA713-VA719, VE042-VE043, VE067-VE069, VE121-VE126, VE141-VE146, VF001-VF002, VF041-VF042, VF051, VK081-VK095, VL001-VL006, VN051-VN058, VN081-VN085, VN191-VN192, VN231-VN234, VS073-VS078, VS266-VS274, VS466-VS472 have moved from Group 1 to a new Group 6.

b. Airplanes VA526, VB122-VB125, VB401, VE083-VE086, VE102-VE104, VE116-VE117, VK031-VK045, VL011, VN211-VN212, VN241-VN243 have moved from Group 1 to a new Group

7.

c. Airplanes VE172, VF061-VF062, VN251-VN276, VR471-VR472, VS066-VS070 have moved from Group 1 to a new Group 8.

d. Airplanes VF071-VF072, VN151-VN158, VN163-VN168 have moved from Group 1 to a new Group

9.

e. Airplanes VN111-VN127, VN130-VN135 have from Group 1 to a new Group 10.

f. Airplanes VR201-VR211, VR251, VR256-VR260, VW701-VW721, VW851 have moved from Group 1 to a new Group 11.

g. Airplane VS303 has moved from Group 1 to a new Group 12.

h. Airplanes VT501, VT521-VT523, VT531-VT533 have moved from Group 5 to a new Group 13.

i. Airplanes VR266-VR292, VT511-VT513 have moved from Group 5 to a new Group 14.

j. Airplanes VS701-VS736, VS821-VS825, VS841-VS844, VS881-VS883, VS896, VS901-VS910, VS916, VS921-VS928, VS931-VS933, VS951-VS954, VS961-VS969, VS971-VS975, VT001-VT013 have moved from Group 5 to a new Group 15.

k. Airplanes VL891-VL900, VS136-VS137 have moved from Group 1 to a new Group 16.

l. Airplanes VN136-VN137, VS246-VS248 have moved from Group 1 to a new Group 17.

m. Airplanes VA801-VA810 have moved from Group 3 to a new Group 18.

n. Airplane VQ111 has moved from Group 2 to a new Group 19.

4. Paragraph 1.G. Manpower, changed existing hours and added manpower tables.

5. Paragraph 1.H. Weight and Balance Changes, changed the existing table and added new tables.

6. Paragraph 1.J.1. Existing Data, added NPRM.

7. Paragraph 1.K.1. Publications, updated the Publications table.

8. Paragraph 2.A. Material - Price and Availability, changed existing kit information, added new top kits and supplemental kits and updated ROLT and pricing data.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 8 of 354 BOEING SERVICE BULLETIN 767-22-0143

9. Paragraph 3.A. General Information, added a note.

10. Paragraph 3.B. Work Instructions, added new instructions.

11. All Figures, changed applicability.

12. FIGURE 1, changed marker part number and the text in the More Data column.

13. FIGURES 4 and 5, changed the location of the bonding clips and updated the step table.

14. FIGURES 7 and 8, changed illustration, added contact part number and wire data.

15. FIGURE 9, changed illustrations.

16. FIGURES 10 and 11, changed illustrations, wire subkits and flag note tables.

17. FIGURE 12, changed illustrations.

18. FIGURES 13 and 14, changed illustrations, wire subkits and flag note tables.

19. FIGURE 15, changed illustration.

20. FIGURES 16 and 17, changed illustrations, wire subkits and flag note tables.

21. FIGURE 18, changed illustrations.

22. FIGURES 19 and 20, changed illustrations and added wire subkits note.

23. FIGURE 21, changed illustration.

24. FIGURES 22, 23 and 25, changed illustrations, wire subkits, flag note tables and cut and code tables.

25. FIGURE 27, changed illustration and wire subkit note.

26. FIGURE 29, changed illustration, wire subkit, flag note table and cut and code table.

27. FIGURE 31, changed illustration, wire subkit and flag note table.

28. FIGURE 33, changed illustration, wire subkit, flag note table and cut and code table.

29. FIGURE 35, changed wire kit note and added activate/deactivate wire list table.

30. FIGURE 37, changed illustration, wire subkit note and added activate/deactivate wire list table.

31. FIGURES 39 and 41, changed illustration and wire subkits note.

32. FIGURES 42, 44 and 46, changed wire subkit note and cut and code table.

33. FIGURE 51, changed illustration.

34. FIGURE 52 thru FIGURE 73, added new figures.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 9 of 354 BOEING SERVICE BULLETIN 767-22-0143

The data given in Information Notices 767-22-0143 IN02 and IN03 are included in this revision. Additional changes were identified and updates were made accordingly.

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes, to show the location of all content changes.

Pages with no vertical lines have no changes.

REVISION HISTORY March 06, 2015Original Issue:

July 06, 2015Revision 1:

May 25, 2016Revision 2:

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 10 of 354 BOEING SERVICE BULLETIN 767-22-0143

Commercial Airplanes 767 Service Bulletin

SPECIAL ATTENTION SummaryNumber: 767-22-0143Original Issue: March 06, 2015 Revision 2: May 25, 2016 ATA System: 2212 2222 3209 SUBJECT: AUTOFLIGHT - Automatic Stabilizer Trim System - On-ground Stabilizer Autotrim Inhibit System Installation BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.

CONCURRENT REQUIREMENTS None.

BACKGROUND This service bulletin gives instructions to install two relays and related wiring to inhibit the Automatic Trim Arm discrete when the airplane is on ground. If this service bulletin is not accomplished, an on-ground autopilot engagement could cause the stabilizer to be trimmed beyond the greenband limits, which could increase the possibility of high-speed rejected takeoff (RTO) and/or of unrecoverable control difficulties.

Operators have experienced cases of uncommanded autopilot engagement at airplane takeoffs on 747-400 and 767 airplanes since April 2009. The root cause of the uncommanded autopilot engagement at airplane takeoffs was not determined. Any one of multiple possible single failures in the Autopilot Flight Director System can cause an uncommanded engagement of the autopilot.

The relays and wiring are installed to open and close the Flight Control Computer (FCC) analog output that controls the stabilizer trim adjustment. The relays are operated by the air-ground switch and the relays interrupt the Autotrim Arm signal path when the air-ground switch is in the on-ground position. A momentary action ground test switch is installed to bypass the air/ground contacts to allow testing of the Automatic trim function when the airplane is on the ground.

For 767-300 and 767-300F airplanes without Aviation Partners Boeing Blended Winglet (Supplemental Type Certificate ST01920SE) installed, this change must be completed. For 767-300 and 767-300F airplanes with STC ST01920SE installed, operators need to contact Aviation Partners Boeing for software solution and compliance recommendation. Refer to Multi-Operator Message MOM-MOM-15-0287-01B.

Boeing Service Related Problem (SRP) 767-SRP-22-0035 is related to this service bulletin.

The related Boeing Service Bulletin is SB 767-22-0146.

Boeing Fleet Team Digest (FTD) 767 FTD 22-12001 is related to this service bulletin.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 11 of 354

As a part of a service bulletin validation program, this change was completed on airplane VB441 by Service Bulletin 767-22-0143 Revision1 before the Revision 2 of this service bulletin. The change completed on airplane VB441 by Service Bulletin 767-22-0143 Revision 1 is equivalent to the Revision 2 of this service bulletin. Airplane VB441 has the configuration of a Group 1 airplane.

This table is provided to operators for planning purposes only. Refer to the applicable sections for more information.

ReferenceAffectedPlanning Data Paragraph 1.A.2., Spares AffectedNoSpares Affected Paragraph 1.E., Compliance and Paragraph

1.F., Approval YesAD Related Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change Paragraph 1.I., Electrical Load DataYesElectrical Load Changed Paragraph 1.K., Publications AffectedYesPublications Affected Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew Operations Manual and/or FAA Approved Airplane Flight Manual) Paragraph 2.C.1., Kits/PartsYesKits/Parts Required Paragraph 2.C.2., Parts and Materials Supplied by the Operator YesOperator Supplied Parts/Material Paragraph 2.F., Special Tooling Necessary to do this Service Bulletin NoSpecial Tooling Required ACTION (PRR B12901-114RS) Get access into the flight compartment and main equipment center. At the left, outboard side of the E1 equipment rack, install the bracket and Test Switch S02690.

Group 1, 3-10, 12, 15-18, Configuration 1:

Install wires and equipment as follows:

– On the E1-4 shelf assembly, install the Relay K10737.

– On the E1-5 shelf assembly, install the Relay K10738.

– On the E1-1 shelf assembly, install wires and make changes to the shelf wire bundles W0101 and W0121.

– On the E1-2 shelf assembly, install wires and make changes to the shelf wire bundles W1092, W1096 and W1100.

– On the E1-4 shelf assembly, install wires and make changes to the shelf wire bundles W0107 and W0127.

– On the E1-5 shelf assembly, install wires and make changes to the shelf wire bundles W0119 and W0129.

– Between E1-1, E1-4 and E1-5 shelf assemblies, install wires and make changes to the wire bundles W1513 and W1523.

– Between the Switch S02690, E1-1 and E1-4 shelf assemblies, install wires and make changes to the wire bundle W0201.

– Between the Switch S02690, E1-1, E1-4 and E1-5 shelf assemblies, install wires and make changes to the wire bundles W1521 and W1541.

Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: March 06, 2015 767-22-0143Revision 2: May 25, 2016 12 of 354 BOEING SERVICE BULLETIN 767-22-0143

Pages 13–24 of 354