Copy · SB 670BA-32-047 Rev A · 12 pages

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0512; AD 2017-17-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'fa72e470c8d4016343482df7f2b516aca1e5d2bd81e7cba5ab62f911cda98598'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

the evolution of mobility SB 670BA- - - 32- - - 047 Page 1 of 1 Dec 05/2016

SERVICE BULLETIN

REVISION TRANSMITTAL SHEET SERVICE BULLETIN 670BA - - -32 - - -047 SUBJECT : Landing Gear - - - Landing Gear Alternate-Extension System - - - Replacement of the Nose Landing Gear (NLG) and the Main Landing Gear (MLG) Electro-Mechanical Actuator (EMA) P/Ns BA698 - - -85006 - - -1 and BA698 - - -85007 - - -1 This Page transmits:

Revision A of Service Bulletin 670BA- - - 32- - - 047, dated Dec 05/2016 The changes in this revision have no effect on aircraft that have had this service bulletin incorporated.

Reason:

Revised Planning Information, paragraph 1., to:

Change the Compliance Change a Reference.

Revised Accomplishment Instructions, paragraph 2., to:

Add some notes and steps.

This revision also includes small editorial changes that do not have an effect on the technical content.

Instructions:

Discard the copy of Service Bulletin 670BA- - - 32- - - 047, dated Feb 28/2014. Replace with the copy attached.

Service Bulletin History:

Initial issue, dated Feb 28/2014 1

the evolution of mobility SB 670BA- - - 32- - - 047 Page 1 of 11 Feb 28/2014 Revision A, Dec 05/2016 T echnical Publications THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED AIRCRAFT ,

TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND THIS SERVICE BULLETIN TO THE NEW

OWNER, UNLESS CONFIRMATION WAS RECEIVED THAT BOMBARDIER HAS INCLUDED THE NEW OPERATOR ON THE DISTRIBUTION LIST .

SEND THIS SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR HAS SOLD AIRCRAFT OR ATA SYSTEM: 32- - -34 NUMBER: 670BA - - -32- - -047 SUBJECT : Landing Gear - - - Landing Gear Alternate-Extension System - - - Replacement of the Nose Landing Gear (NLG) and the Main Landing Gear (MLG) Electro-Mechanical Actuator (EMA) P/Ns BA698 - - -85006 - - -1 and BA698 - - -85007 - - -1

1. PLANNING INFORMATION A. Effectivity

(1) Aircraft Affected:

AIRCRAFT MODEL SERVICE AIRCRAFTSERIAL NUMBERS PRODUCTIONAIRCRAFTSERIAL NUMBERS CL- - - 600- - - 2E25 19001 thru 19039 19040 and subsequent [1] [1] Aircraft will have this change incorporated before delivery.

NOTE: The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier service bulletins. Before you do this service bulletin, examine all Supplemental Type Certificates (STCs) and Supplemental Type Approvals (STAs) or equivalent action changes to make sure you can complete this service bulletin.

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 2 of 11 Feb 28/2014 Revision A, Dec 05/2016 B. Reason

(1) Condition During alternate-extension of the landing gears, the Main Landing Gear (MLG) Electro-Mechanical Actuator (EMA) does not always retract to release the MLG uplocks and activate the bypass valve, to get hydraulic pressure to return when the alternate-extension system is initially activated.

It is also possible for the retract stop pin, in the NLG and the MLG EMA, to bend or break. A broken internal retract stop-pin can prevent the (Nose Landing Gear) NLG or the MLG EMAs to operate freely.

(2) Evidence This condition was found in production during the Functional T est Procedure (FTP) of the landing-gear alternate-extension system.

(3) Objective/Benefit This service bulletin gives the instructions to remove the NLG and the MLG EMAs, do Triumph Actuation Systems - - - Connecticut Service Bulletins HTD32004- - - 32- - - 01 and HTD32004- - - 32- - - 02, and install a new or an upgraded N L Ga n dM L GE M A .

The new or upgraded EMAs will improve the functionality of the landing gear alternate-extension system.

C. Description This service bulletin is divided into two parts: PART A and PART B.

PART A - - - Replacement of the NLG EMA The NLG EMA is removed. Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 01 can be done. A new or an upgraded NLG EMA is installed and a return to service test is done.

PART B - - - Replacement of the MLG EMA The MLG EMA is removed. Triumph Actuation Systems - - - Connecticut Service Bulletins HTD32004- - - 32- - - 02 can be done. A new or an upgraded MLG EMA is installed and a return to service test is done.

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 3 of 11 Feb 28/2014 Revision A, Dec 05/2016 D. Compliance Recommended service bulletin.

Bombardier recommends that this service bulletin be done at no more than 1200 flight hours from the release date on Revision A of this service bulletin, unless otherwise directed by the airworthiness authority of the operator.

This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage T olerance Inspections (DTIs).

E. Approval The technical content of this service bulletin has been approved under the authority of the TCCA Design Approval Organization No: DAO #93- - -Q- - -02.

F. M a n p o w e r The man-hours given below are estimates for direct labor done by an experienced crew on an aircraft prepared for maintenance.

These estimates do not include the time necessary for:

- - - Administrative functions such as planning, liaising, familiarization, and report writing.

- - - Non-productive elapsed time such as rest time, having meals, and crew shift changes.

- - - Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.

- - -Preparation for modification (unless specified in the Accomplishment Instructions) such as cleaning and getting parts, tools, consumables, and ground equipment.

- - -Quality assurance inspections, troubleshooting and/or correction of discrepancies found when a task is done.

- - -All other activities that are not considered by Bombardier as directly related to the accomplishment of this procedure.

NOTE: For on-site labor assistance, please speak with a Fleet Services representative for an estimate. Call the Fleet Services Team through the CRC at 1- - - 844- - - 272- - - 2720 (1- - - 844- - - CRC - - - CRC0) or 1- - - 514- - - 855- - - 8500 or e-mail at thd.crj@aero.bombardier.com.

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 4 of 11 Feb 28/2014 Revision A, Dec 05/2016

FOR PART A It will take an estimated 3.00 man-hours to complete PART A of this service bulletin.

The man-hours are divided in the table that follows:

TASK MAN-HOURS

(1) Job Set-Up 0.50

(2) Procedure 1.50

(3) T est 0.50

(4) Job Close-Out 0.50 NOTE: These estimates do not include the man-hours necessary to do Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 01.

FOR PART B It will take an estimated 3.00 man-hours to complete PART B of this service bulletin.

The man-hours are divided in the table that follows:

TASK MAN-HOURS

(1) Job Set-Up 0.50

(2) Procedure 1.50

(3) T est 0.50

(4) Job Close-Out 0.50 NOTE: These estimates do not include the man-hours necessary to do Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 02.

G. Material - - - Price and Availability There are no kits for this service bulletin.

Refer to Triumph Actuation Systems - - - Connecticut Service Bulletins HTD32004- - - 32- - - 01 and HTD32004- - - 32- - - 02 for terms and conditions to do the modification of the EMAs P/N BA698- - - 85006- - - 1 (HTD32004- - - 23) and P/N BA698- - - 85007- - - 1 (HTD32004- - - 21) to the new EMAs P/N BA698- - - 85006- - - 3 (HTD32004- - - 39) and P/N BA698- - - 85007- - - 3 (HTD32004- - - 37).

Refer to paragraph 3.B. for a list of consumables for this service bulletin.

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 5 of 11 Feb 28/2014 Revision A, Dec 05/2016 H. T ooling - - - Price and Availability There are no tool kits for this service bulletin.

Refer paragraph 3.C and to Triumph Actuation Systems - - - Connecticut Service Bulletins HTD32004- - - 32- - - 01 and HTD32004- - - 32- - - 02 for a list of special tools and equipment for this service bulletin.

I. Weight and Balance Not changed.

J. Electrical Load Data Not changed.

K. References Refer to the SB Introduction document for definition or explanation of service bulletin content.

Restriction and/or Special Instruction (RSI) C- - -32- - -1606- - -00, Revision C Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 01, dated 25 FEB 2014 Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 02, dated 25 FEB 2014 Aircraft Maintenance Manual (AMM) For Bombardier reference only: PCA 75253 L. Other Publications Affected Aircraft Illustrated Parts Catalogue (AIPC) Aircraft Maintenance Manual (AMM) M. Relationship Chart PRE-SB

PART NUMBER NAME POST-SBPART NUMBER NAME BA698- - - 85006- - - 1 (HTD32004- - - 23) Actuator, Electro-mechanical (NLG) BA698- - - 85006- - - 3 (HTD32004- - - 39) Actuator, Electro-mechanical (NLG) BA698- - - 85007- - - 1 (HTD32004- - - 21) Actuator, Electro-mechanical (MLG) BA698- - - 85007- - - 3 (HTD32004- - - 37) Actuator, Electro-mechanical (MLG)

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 6 of 11 Feb 28/2014 Revision A, Dec 05/2016

2. ACCOMPLISHMENT INSTRUCTIONS PART A - - - Replacement of the NLG EMA Reference Information

REFERENCE DESIGNATION A M M 1 2 --- 0 0 --- 0 0 --- 8 6 7 --- 8 0 1Standard Aircraft Configuration for Maintenance A M M 3 2 --- 3 4 --- 1 6 --- 0 0 0 --- 8 0 1 R e m o v a lo ft h eN L GE l e c t r o - M e c h a n i c a l Actuator A M M 3 2 --- 3 4 --- 1 6 --- 4 0 0 --- 8 0 1Installation of the NLG Electro-Mechanical Actuator A. Job Set-Up NOTE: The steps in the Job Set-Up section of this service bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator discretion.

(1) Make sure that the aircraft is in standard configuration for maintenance (refer to AMM 12- - - 00- - - 00- - - 867- - - 801).

B. Procedure Refer to Figure 1.

(1) If it is not possible to complete all the instructions in this service bulletin because of the configuration of the aircraft, speak with a representative of Bombardier in the CRC at 1- - - 844- - - 272- - - 2720 (1- - - 844- - - CRC - - - CRC0) or 1- - - 514- - - 855- - - 8500 or e-mail at thd.crj@aero.bombardier.com for analysis and to get an approved disposition to complete this service bulletin.

(2) Remove the NLG electro-mechanical actuator (1) (refer to AMM 32- - - 34- - - 16- - - 000- - - 801).

NOTE: The NLG electro-mechanical actuator is upgraded with Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 01.

(3) Install a new or upgraded NLG electro-mechanical actuator (1) (refer to AMM 32- - - 34- - - 16- - - 400- - - 801).

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 7 of 11 Feb 28/2014 Revision A, Dec 05/2016 C. Job Close-Out NOTE: The steps in the Job Close-Out section of this service bulletin, except for the return-to-service tests, are recommended steps. The steps give a recommendation to install components removed during the Job Set-Up.

This recommendation is to make sure that the aircraft is safe and ready to return to service. Alternative steps can be used at the operator discretion.

(1) Remove all tools, equipment, and unwanted materials from the work area.

(2) When PART A of this service bulletin is completed, make this entry in the applicable logbooks: “Service Bulletin 670BA- - - 32- - - 047, Revision A, Landing Gear - - - Landing Gear Alternate-Extension System - - - Replacement of the Nose Landing Gear (NLG) and the Main Landing Gear (MLG) Electro-Mechanical Actuator (EMA) P/Ns BA698- - - 85006- - - 1 and BA698- - - 85007- - - 1, PART A, incorporated.”

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 8 of 11 Feb 28/2014 Revision A, Dec 05/2016 PART B - - - Replacement of the MLG EMA Reference Information

REFERENCE DESIGNATION A M M 1 2 --- 0 0 --- 0 0 --- 8 6 7 --- 8 0 1Standard Aircraft Configuration for Maintenance A M M 3 2 --- 3 4 --- 2 1 --- 0 0 0 --- 8 0 1 Removal of the MLG Electro-Mechanical Actuator A M M 3 2 --- 3 4 --- 2 1 --- 4 0 0 --- 8 0 1Installation of the MLG Electro-Mechanical Actuator D. Job Set-Up NOTE: The steps in the Job Set-Up section of this service bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator discretion.

(1) Make sure that the aircraft is in standard configuration for maintenance (refer to AMM 12- - - 00- - - 00- - - 867- - - 801).

E. Procedure

(1) If it is not possible to complete all the instructions in this service bulletin because of the configuration of the aircraft, speak with a representative of Bombardier in the CRC at 1- - - 844- - - 272- - - 2720 (1- - - 844- - - CRC - - - CRC0) or 1- - - 514- - - 855- - - 8500 or e-mail at thd.crj@aero.bombardier.com for analysis and to get an approved disposition to complete this service bulletin.

Refer to Figure 1.

(2) Remove the MLG electro-mechanical actuator (2) (refer to AMM 32- - - 34- - - 21- - - 000- - - 801).

NOTE: The MLG electro-mechanical actuator is upgraded with Triumph Actuation Systems - - - Connecticut Service Bulletin HTD32004- - - 32- - - 02.

(3) Install a new or upgraded MLG electro-mechanical actuator (2) (refer to AMM 32- - - 34- - - 21- - - 400- - - 801).

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 9 of 11 Feb 28/2014 Revision A, Dec 05/2016 F. J o b C l o s e - O u t NOTE: The steps in the Job Close-Out section of this service bulletin, except for the return-to-service tests, are recommended steps. The steps give a recommendation to install components removed during the Job Set-Up.

This recommendation is to make sure that the aircraft is safe and ready to return to service. Alternative steps can be used at the operator discretion.

(1) Remove all tools, equipment, and unwanted materials from the work area.

(2) When PART B of this service bulletin is completed, make this entry in the applicable logbooks: “Service Bulletin 670BA- - - 32- - - 047, Revision A, Landing Gear - - - Landing Gear Alternate-Extension System - - - Replacement of the Nose Landing Gear (NLG) and the Main Landing Gear (MLG) Electro-Mechanical Actuator (EMA) P/Ns BA698- - - 85006- - - 1 and BA698- - - 85007- - - 1, PART B, incorporated.”

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 10 of 11 Feb 28/2014 Revision A, Dec 05/2016 N L Ga n dM L GE M A- - -R e p l a c e m e n t F i g u r e1( S h e e t1o f1 ) ba8182y01.cgm, kp/cr, February 19, 2014 A B 1 2 B A LEGEND

1. Electro- -mechanical actuator, NLG BA698- -85006- -1 (HDT32004- -23) (Pre- -Mod) BA698- -85006- -3 (HDT32004- -39) (Post- -Mod).

2. Electro- -mechanical actuator, MLG BA698- -85007- -1 (HDT32004- -21) (Pre- -Mod) BA698- -85007- -3 (HDT32004- -37) (Post- -Mod).

SERVICE BULLETIN 670BA- - -32- - -047 SB 670BA- - - 32- - - 047 Page 11 of 11 Feb 28/2014 Revision A, Dec 05/2016

3. MATERIAL INFORMATION A. Kit Information None.

B. Consumable Information For a list of consumables, refer to the different tasks and the Triumph Actuation Systems - - - Connecticut service bulletins that are given as references in this service bulletin.

C. Special T ools and Equipment For a list of special tools and equipment, refer to the different tasks and the Triumph Actuation Systems - - - Connecticut service bulletins that are given as references in this service bulletin.

D. Disposition of Parts The table that follows shows the relation between the new parts and/or modified parts to be installed during the incorporation of this service bulletin and the disposition of the affected parts from the aircraft (or spares).

PRE-SB

PART NUMBER

NAME QTY DC POST-SB

PART NUMBER NAME BA698-85006-1 (HTD32004- - - 23) Actuator, electromechanical (NLG) 1 MOD BA698-85006-3(HTD32004- - - 39) Actuator, electro-mechanical(NLG) BA698-85007-1 (HTD32004- - - 21) Actuator, electromechanical (MLG) 1 MOD BA698-85007-3(HTD32004- - - 37) Actuator, electro-mechanical(MLG) Disposition code (DC):

MOD: Modification: For modification of part, refer to Triumph Actuation Systems - - - Connecticut Service Bulletins HTD32004- - - 32- - - 01 and HTD32004- - - 32- - - 02.