Service bulletin · Bombardier

Revision 01700-1A11-35-014 Rev01 · 27 pages · 1.0 MB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-0085; AD 2022-12-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-0085 (document 0007) · AD 2022-12-01

Manufacturer
Bombardier
Type
Service Bulletin
Number
700-1A11-35-014
Latest revision known
700-1A11-35-014, Revision 01, dated February 12, 2021

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 27

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-0085; AD 2022-12-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '44300f13528964b6c70af89b23cc72fff065c013a458797dbb76a545ce0990f4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Discard the Basic Issue of this Service Bulletin dated Sep 28/2020 and replace in its entirety with this Revision 01.

This revision has no effect for aircraft on which the Basic Issue of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry. You may make an entry as "Not Applicable" for this revision.

This revision is issued to:

1. Revise, in Paragraph 1.C. and 1.K., to add hoses details for the step on Appendix 1.

2. Revised, in Paragraph 1.E., the STC numbers.

3. Deleted, in Paragraph 1.F., a NOTE for the labour hour calculation.

4. Added, in Paragraph 1.F., a new NOTE.

5. Add, in Paragraph 1.K., Advisory Wire number.

6. Revise, in Paragraph 2.B.(1)., (2) and (3)., to add green fitting hoses to the statement.

7. Deleted, in Paragraph 2.B.2(f)., a Note.

8. Add, in Appendix 1 − Record Table, a new NOTES.

9. Make miscellaneous minor changes, as necessary, with no change of context.

SERVICE BULLETIN MODEL BD−700−1A11 (BD−700) 700−1A11−35−014 Page 1 of 1 REVISION TRANSMITTAL SHEETService Bulletin No.

700−1A11−35−014 Date of Basic Issue Sep 28/2020 Revision No. 01 Dated Feb 12/2021

MODIFICATION – OXYGEN SUPPLY SYSTEM –

FLEXIBLE OXYGEN HOSE REPLACEMENT The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.

RECOMMENDED

SPECIFIED TIME COMPLIANCE

COMPLIANCE TIME Within six months from this Service Bulletin release date (Basic Issue) EFFECTIVITY: A/C Serial No. 9130 to 9209, 9212 to 9305, 9311 to 9359, 9366 to 9430and 9998 MANPOWER: Refer to Paragraph 1.F.

CONTINUED AIRWORTHINESS (CAW)

FLEET CAMPAIGN YES NO TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO

TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO

DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make it necessary to implement this Service Bulletin.

To place an order for parts or kits, please call Bombardier Aviation Parts Services at:

514−855−2999 or 1−866−538−1247

SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL BD−700−1A11 (BD−700) ATA 35−11 OXYGEN Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 1 of 1 This Service Bulletin is available at:

MODIFICATION – OXYGEN SUPPLY SYSTEM –

FLEXIBLE OXYGEN HOSE REPLACEMENT

1. PLANNING INFORMATION NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.

2. Due to different aircraft configurations, operators must first inspect their existing oxygen hose installation prior to placing an order with Parts Services.

3. Bombardier Aviation recommends to replace all existing O2C20T1 hoses at the earliest opportunity.

4. All O2C20T1 series hoses must be replaced within 10 years of Aircraft Completion STC issuance.

A. Effectivity BD−700−1A11 aircraft, Serial No. 9130 to 9209, 9212 to 9305, 9311 to 9359, 9366 to 9430 and 9998.

NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aviation Service Bulletin(s).

SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL BD−700−1A11 (BD−700) ATA 35−11 OXYGEN Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

 2020−2021 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.

Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 1 of 23 This Service Bulletin is available at:

B. Reason

1. Condition:

After the deployment functional test of the oxygen masks at a scheduled maintenance, Bombardier Service Center reported that four hoses used for the passenger oxygen were found damaged.

2. Evidence:

After investigation, it was found that over time, the O2C20T1 series hoses may have leak points in them through structural cracks or breaks, and may become rigid or brittle at some areas.

3. Objective/Benefit:

The intent of this Service Bulletin is to remove and replace all installed O2C20T1 series flexible oxygen hoses, with 3891X series hoses.

Engineering evaluation has concluded that 3891X series flexible oxygen hoses, which are manufactured from different materials, have shown no sign of deterioration due to age or other environmental factors.

C. Description This Service Bulletin gives instructions in PART A to:

− Inspect the hose assembly installations located in the crew rest PSU, the cabin PSUs, the RHS dado (therapeutic oxygen) and the AFT flexible transitions, − Inspect the hose assembly installations located behind the FWD lavatory headliner, the entrance area headliner (jumpseat, entrance) and the FWD flexible transitions, − Inspect the hose assembly installations located in the flight compartment and the third crew (LHS enclosure), − Fill out Appendix 1 with the affected O2C20T1 series flexible oxygen hoses part numbers found installed, and − Order the replacement parts as required and per aircraft configuration.

This Service Bulletin gives instructions in PART B to:

− Remove the O2C20T1 series hoses, and − Install the 3891X series hoses as per Figure 2.

After PART A and PART B, this Service Bulletin gives instructions to:

− Do the necessary tests of the oxygen system.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 2 of 23

D. Compliance Recommended within six months from this Service Bulletin release date (Basic Issue).

NOTES: 1. Bombardier Aviation recommends that this Service Bulletin be done at the operator’s earliest convenience, unless otherwise directed by the airworthiness authority of the operator.

2. If it is not possible to complete all the instructions in this Service Bulletin because of the aircraft configuration, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.

E. Approval The technical content of this Service Bulletin has been approved under the authority of TC STC number SA05−60, FAA STC number ST02140NY, EASA STC number 10062336.

F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this Service Bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, repainting, supervision and inspection.

For more information related to the manpower, refer to SB 700−1A11−00−002.

2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the man−hours and should be considered for planning purposes before you schedule this Service Bulletin.

A maximum of 10 man−hours are necessary to do PART A of this modification.

NOTE:

− 10 hours (max) are required to get access for a visual of the hose fittings. There is no need to remove completely the furniture to get access.

A maximum of 25 man−hours are necessary to do PART B of this modification.

Bombardier Aviation does not pay for the labor to do this modification.

G. Material − Cost and Availability No kit is necessary to do this modification. For material data, refer to Paragraph 3.C.

The parts in Paragraph 3.B. are necessary to do this modification.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 3 of 23

The parts can be purchased by sending a purchase order to Bombardier Aviation Parts Services, Montreal.

Bombardier Aviation does not pay for the parts to do this modification.

Smart Parts does not pay for the parts to do this modification.

H. Tooling The equipment and tools listed below are necessary to do this modification:

GSE REFERENCE NO. PART NO. DESCRIPTION 12X−20−02 − Nitrogen Service Cart 20X−10−01 S4933959−501 Tag, Circuit Breaker 35X−10−01 G700−351001−29 Test Kit − Crew OxygenSystem Commercially Available − Electrical Outlet Tester Commercially Available − Oxygen Pressure Test Gauge (OPTG) with a Resolution of 2 psi (13.79 kPa) Minimum Commercially Available − Tag, DO NOT ACTIVATE Commercially Available − Wrench, Torque 100 to 125 lbfin (11.30 to 14.12 Nm) NOTES: 1. Refer to the Global 5000 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.

2. Refer to the Liability Statement in the ITEM for the G5000 for acceptable GSE equivalents.

3. Refer to the Pressure task applicable to your aircraft in IFCA BAS67058081 (attached) for the requirement of the Nitrogen service cart or not.

4. This list is provided for quick reference. In case of discrepancy between this list and the tools called in the SPM, WM, Chapter 20, then the tools called in the SPM, WM prevail. Other approved alternative tools are acceptable and can also be used.

I. Weight and Balance No change.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 4 of 23

J. Electrical Load Data No change.

K. References − TCCA Airworthiness Directive, (pending) − Advisory Wire, AW700−35−0794.

− Bombardier Instructions for Continued Airworthiness (IFCA), BAS67058081 (attached).

− Bombardier Aviation, Kit Drawing BAS67638098, Rev. A.

− Global 5000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 6, 12, 24, 25, 35 and 52.

− Global 5000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 25.

− Global 5000 BD−700 Illustrated Tool and Equipment Manual (ITEM), Chapters 20 and 35.

− Bombardier Aviation, Standard Practices Manual (SPM), Chapters 20 and 51.

− Supplemental Maintenance Manual (SMM), Chapters 24, 25 and 35.

− Appendix 1 − Record Table (attached) for O2C20T1 series flexible oxygen hoses only (green fitting hoses).

L. Other Publications Affected None.

M. Equivalent Service Bulletins − For the Global Express and Global Express XRS BD−700−1A10 aircraft, use SB 700−35−015.

− For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft, use SB 700−35−5005.

− For the Global 6000 BD−700−1A10 aircraft, use SB 700−35−6005.

− For the Global 6500 BD−700−1A10 aircraft, use SB 700−35−6501.

2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the Global 5000 BD−700−1A11 Aircraft Maintenance Manual (AMM) unless otherwise specified.

2. All references made to zones, access panels and/or doors, are from the Global 5000 BD−700−1A11 Aircraft Maintenance Manual (AMM), Chapter 6.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 5 of 23

A. Aircraft Setup NOTE: The steps in the Aircraft Setup section of this Service Bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator’s discretion.

(1) Obey all electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.

(2) For PART A :

(a) Open and tag the circuit breaker that follows:

LOCATION CB NO. NAME ZONE CCBP 2 A−6 BOARDING PANEL 221

(3) For PART B :

(a) Obey all the oxygen system safety precautions. Refer to AMM 35−00−00−910−801.

(b) If replacing the flight compartment and/or the third crew (LHS enclosure) hoses, do the following:

(i) Make sure the BATTERY MASTER switch in the flight compartment is set to OFF.

(ii) Remove the forward equipment compartment access panels (131AL/132AR). Refer to AMM 52−45−05−000−801.

B. PART A — Part Number Inspection on Existing Oxygen System NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.

(1) Refer to Figure 1 and 2 and inspect the part number of the oxygen hose installations at the locations that follow. Note the green fitting hoses installed part numbers only in Table 2 of Appendix 1 for aircraft records:

(a) If installed, remove the mid cabin removable partition. Refer to SMM 25−23−64−000−801.

(b) Open and inspect the installation in the crew rest PSU. Refer to SMM 25−17−64−010−801.

(c) Open and inspect the installations in the cabin PSUs. Refer to SMM 25−28−54−010−801.

(d) Inspect the cabin transition hose installations.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 6 of 23

(e) Inspect the installation in the AFT lavatory as follows:

(i) If the installation is in the PSU, open the AFT lavatory PSU. Refer to SMM 25−42−56−010−801.

(ii) If the installation is behind the headliner, remove the AFT lavatory headliner. Refer to SMM 25−42−54−000−801.

(iii) Inspect the installation in the AFT lavatory.

(f) Remove the two RHS dado panels, or until visual inspection is possible.

Refer to SMM 25−28−56−000−801.

(g) Inspect the two therapeutic oxygen installations.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 7 of 23

A GREEN FITTING CORRESPONDS TO THE O2C20T1 SERIES

REMOVE AND REPLACE

A BLUE FITTING CORRESPONDS TO THE 3891X SERIES

NO REPLACEMENT REQUIRED SB700−35−6501_001 FIGURE 1 MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 8 of 23

(2) Refer to Figure 1 and 2 and inspect the part number of the oxygen hose installations at the locations that follow. Note the green fitting hoses installed part numbers only in Table 3 of Appendix 1 for aircraft records:

(a) Detach the FWD lavatory headliner until visual inspection is possible.

Refer to SMM 25−41−54−000−801.

NOTES: 1. Do not fully remove the headliner.

2. Do not remove the oxygen deployment box from the headliner.

(b) Inspect the FWD lavatory installation.

(c) Detach the entry area headliner until visual inspection is possible. Refer to SMM 25−15−52−000−801.

NOTES: 1. Do not fully remove the headliner.

2. Do not remove the oxygen deployment boxes from the headliner.

(d) Inspect the entrance area installation.

(e) Inspect the jumpseat installation.

(f) Inspect the FWD transition hose installations.

(3) Refer to Figure 1 and 2 and inspect the part number at the oxygen hose installations that follow. Note the green fitting hoses installed part numbers only in Table 4 of Appendix 1:

(a) Remove the pilot and copilot decorative trim panel (Ref GC722−0138) and side console panels (221QZ/222QZ), until visual inspection is possible.

Refer to AIPC 25−12−05 and AMM 25−12−05−000−801.

(b) Inspect the pilot and copilot side console installation.

NOTE: Inspect carefully for hidden hoses.

(c) Carefully pull out the oxygen mask stowage box in the third crew (LHS enclose) until visual inspection is possible. Refer to SMM 35−11−54−000−801.

NOTE: Do not remove the mask.

(d) Inspect the third crew installation.

(4) If no O2C20T1 series hose is installed, then PART B of this Service Bulletin is not applicable to your aircraft. Make an entry in the aircraft log and go to Paragraph 2.F. Close−out.

(5) If one or more O2C20T1 series hose is installed, do one of the following:

(a) Place an order for the replacement parts. Refer to Paragraph 3.B.

NOTE: It is permissible to install a longer or shorter hose assembly to ensure a proper installation.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 9 of 23

(b) Go to Paragraph 2.A.(3) Aircraft Setup for PART B .

(c) Continue to Paragraph 2.C.

C. PART B — Modification — Flexible Oxygen Hose Replacement NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.

(1) Obey all the oxygen−system safety precautions. Refer to AMM 35−00−00−910−801.

(2) Obey all electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.

WARNING: BE CAREFUL WHEN YOU DO WORK ON OR NEAR THE CAPILLARY LINES. CAPILLARY LINES CAN BE EASILY DAMAGED. IF THEY ARE DAMAGED, IT CAN CAUSE INJURY TO PERSONNEL AND DAMAGE TO EQUIPMENT.

WARNING: WHEN YOU LOOSEN OR TIGHTEN THE CAPILLARY LINES, MAKE

SURE THAT THE CAPILLARY LINES DO NOT TURN WITH THE FITTINGS. IF YOU DO NOT DO THIS, YOU CAN CAUSE THE LINE TO BREAK AND CAUSE INJURY TO PERSONNEL.

(3) If replacing the installation in the flight compartment or the third crew (LHS enclosure), make sure the ON/OFF switch on the oxygen cylinder regulator is set to OFF. Refer to AMM 35−00−00−910−801.

WARNING: DO NOT LET OIL, GREASE, OR SOLVENTS GET ON YOUR

HANDS, CLOTHING, OR THE EQUIPMENT USED TO DO WORK ON THE OXYGEN SYSTEM. IF OXYGEN TOUCHES OIL, GREASE OR SOLVENTS, THEY CAN START TO BURN.

(4) Remove and replace all O2C20T1 series hose installed at the locations shown in Figure 2 as follows. Refer to the applicable Notes on Figure 2:

NOTES: 1. Keep all lines, fittings and connections completely free of oil, grease and foreign matter. Cap open ends of cleaned and dried tubing connections at all times.

2. Do not put thread compound on the female fitting.

3. Do not put thread compound on the first two male threads.

4. Do not use teflon tape on any flared male or female tube fittings and coupling sleeve threads.

5. For the connection of oxygen lines on male pipe threads, apply teflon tape conforming to MIL−T−27730. On male flared threads apply only anti−seize compound which conforms to MIL−PRF−27617, Type II, which is suitable for gaseous oxygen.

MODEL BD−700−1A11 (BD−700) Basic Issue: Sep 28/2020 Revision 01: Feb 12/2021 700−1A11−35−014 Page 10 of 23