Service bulletin · Bombardier

Revision 03350-32-007_R03 · 27 pages · 792 KB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0792; AD 2019-03-29 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2018-0792 (document 0007) · AD 2019-03-29

Manufacturer
Bombardier
Type
Service Bulletin
Number
350-32-007
Latest revision known
350-32-007, Revision 03, dated March 27, 2018

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 27

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0792; AD 2019-03-29 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '868745ffaec0a5a1b95251502f745f81aa787b5c02e3bccef4b73d295b684c02'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Apr 10/2018 350-32-007 Page 1 of 1

SERVICE BULLETIN INFORMATION SHEET MODEL BD-100-1A10 (CH-350) ATA 32-51

LANDING GEAR MODIFICATION – NOSE WHEEL STEERING CONTROL SYSTEM –

ADDITION OF A FILTER IN THE NOSE WHEEL STEERING HYDRAULIC SYSTEM

Service Bulletin No.: 350-32-007 Issue: Rev. 03 Dated: Mar 27 /2018 The following data is supplied for information only. No revision to the Service Bulletin is necessary.

Keep this Information Sheet with subject Service Bulletin.

This Information Sheet is issued to inform the operators that Transport Canada Airworthiness Directive CF-2018-11 is now released and effective as of April 19, 2018.

For aircraft that have incorporated this Service Bulletin at Revision Basic, Revision 01 or Revision 02, make sure you comply with the Retroactive Action as per the AD Time Compliance.

Discard the Revision 02 of this Service Bulletin dated Mar 14/2018 and the Information Sheet dated Mar 15/2018 and replace in its entirety with this Revision 03.

Service Bulletin No. 350−32−007 Date of Basic Issue Jan 04/2018 Revision No. 01 Dated Jan 23/2018 Revision No. 02 Dated Mar 14/2018 Revision No. 03 Dated Mar 27/2018 For action applicable to aircraft on which the Basic Issue Revision 01 or Revision 02 of this Service Bulletin was done, refer to the retroactive action box on Page 1 of this Service Bulletin.

This revision is issued to:

1. Revise, in Page 1, the retroactive action.

2. Change, in Paragraph 1.K., the revision of Modification Summary 100T010888 to Rev. C.

3. Revise, in Paragraph 2.B.(5)(w), the instructions and the torque values.

4. Make miscellaneous minor changes, as necessary, with no change of context.

SERVICE BULLETIN MODEL BD−100−1A10 (CH−350) 350−32−007 Page 1 of 1

REVISION TRANSMITTAL SHEET

MODIFICATION - NOSEWHEEL-STEERING CONTROL SYSTEM -

ADDITION OF A FILTER IN THE NOSEWHEEL STEERING HYDRAULIC SYSTEM The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.

RECOMMENDED

SPECIFIED TIME COMPLIANCE

COMPLIANCE TIME Within 60 months or 2000 flight cycles from Service Bulletin release date (Basic Issue) whichever comes first EFFECTIVITY: A/C Serial No. 20501 to 20744 MANPOWER: 25 man−hours

CONTINUED AIRWORTHINESS (CAW)

FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO

TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO

DEDICATED SCHEDULE YES NO PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make it necessary to implement this Service Bulletin.

To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:

514−855−2999 or 1−866−538−1247

SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL BD−100−1A10 (CH−350) ATA 32−51

LANDING GEAR Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 1 of 1 This Service Bulletin is available at:

MODIFICATION - NOSEWHEEL-STEERING CONTROL SYSTEM -

ADDITION OF A FILTER IN THE NOSEWHEEL STEERING HYDRAULIC SYSTEM

RETROACTIVE ACTION

THE ACTION THAT FOLLOWS IS RECOMMENDED FOR AIRCRAFT ON WHICH THE BASIC ISSUE, REVISION 01 OR REVISION 02 OF THIS SERVICE BULLETIN WAS DONE:

Torque the fittings on tube assembly, Part No. K1000070395−401, as follows:

− for the fitting on the pressure filter manifold, 17.92 to 23.33 lb ft (24.30 to

31.63 Nm), and − for the fitting on the priority valve, 39.17 to 45.83 lb ft (53.11 to 62.13 Nm).

Refer to SPM−MM 20−22−00−910−801.

SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL BD−100−1A10 (CH−350) ATA 32−51

LANDING GEAR Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

 2018 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.

Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 1 of 22 This Service Bulletin is available at:

1. PLANNING INFORMATION NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.

2. This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are used to reserve and manage inventory due to limited availability of rotable stock, parts and/or kits. Parts are limited, therefore, advance part scheduling with our In−Service Implementation Team (ISIT) is recommended prior to a maintenance visit. Please contact your Regional Manager (RM), Field Service Representative (FSR) or Customer Service Representative (CSR) to schedule your aircraft as there is a limited availability. The parts will be allocated on a first come first serve basis.

For more information on dedicated schedules, refer to SB 100−00−02.

A. Effectivity BD−100−1A10 aircraft, Serial No. 20501 to 20744.

All other subsequent BD−100−1A10 aircraft are scheduled for the modification in production (Ref.: Modification Summary 100T010888).

NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).

Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.

Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.

B. Reason In the LH hydraulic system, a direct line that runs between the LH DCMP and the Steering Selector Valve (SSV), supplies unfiltered hydraulic fluid to the NoseWheel Steering (NWS) system. Contaminated hydraulic fluid may cause the SSV to be blocked in the open position, which will leave the NWS system unprotected should the SCU require the SSV to shut−down in case of detection of NWS failure.

This Service Bulletin introduces a modification that installs a hydraulic filter into the hydraulic line between the DCMP and the SSV, on the LH hydraulic system. This will eliminate the risk of contaminated fluid reaching the SSV. The benefits to the operator are improved reliability and reduced maintenance costs.

C. Description This Service Bulletin gives instructions to:

− Open the aft equipment−compartment door, − Get access to the left hydraulic system, MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 2 of 22

− Remove some hydraulic tube assembly, − Install new support structure for a new hydraulic filter, − Install a new hydraulic filter, − Install new hydraulic tube assembly, and − Do the necessary tests to make sure that the system operates correctly.

D. Compliance Recommended within 60 months or 2000 flight cycles from this Service Bulletin release date (Basic Issue) whichever comes first.

NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the aircraft configuration, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.

E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.

NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.

2. The technical content of this Service Bulletin is accepted by EASA under the Canada/EU bilateral Aviation Safety Agreement.

F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.

For more information related to the manpower, refer to SB 350−00−002.

2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the man−hours and should be considered for planning purposes before you schedule this Service Bulletin.

25 man−hours are necessary to do this modification.

The labor required to do this Service Bulletin is at no cost if:

− the work is done during new aircraft warranty period, and − the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 3 of 22

− this Service Bulletin is scheduled in less than 60 months from its release date (Basic Issue).

G. Material − Cost and Availability Kit 100K32−31 is necessary to do this modification.

KIT NO. PRICE 100K32−31 Please contact Bombardier Aerospace Parts Services, in Montreal, for delivery lead times and confirmation of prices.

This kit is available at no cost if:

− ordered during new aircraft warranty period, and − a no−charge purchase order is sent to Bombardier Aerospace in less than 60 months, from this Service Bulletin release date (Basic Issue).

This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are used to reserve and manage inventory due to limited availability of rotable stock, parts and/or kits. Parts are limited, therefore, advance part scheduling with our In−Service Implementation Team (ISIT) is recommended prior to a maintenance visit. Please contact your Regional Manager (RM), Field Service Representative (FSR) or Customer Service Representative (CSR) to schedule your aircraft as there is a limited availability. The parts will be allocated on a first come first serve basis.

For more information on dedicated schedules, refer to SB 350−00−002.

For all parts transactions, Bombardier Aerospace’s current Spare Parts and Component Repair Price Catalogue General Terms and Conditions apply. These terms and conditions are found on the Bombardier Customer Portal at:

my.businessaircraft.bombardier.com For those aircraft in new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus does not pay for the kit at any time.

For those aircraft out of new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus pays for the kit for up to one year from the Service Bulletin distribution date (Basic Issue).

H. Tooling The equipment and tools listed below are necessary to do this modification:

GSE REFERENCE NO. PART NO. DESCRIPTION 20X−00−04 M1−G−KIT Bonding Tester, Portable 24−00−24 S4933959−501 Tag, Circuit Breaker MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 4 of 22

GSE REFERENCE NO. PART NO. DESCRIPTION 29−10−02 DLTFRPSKT3001 Kit, DeutschPermaswage Tool Commercially Available − Container, HydraulicFluid Commercially Available − Wrench, Torque Commercially Available G470B Gun, Cherry Max Commercially Available H753A−456 Pulling Head, RightAngle NOTES: 1. Refer to the CH 350 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.

2. Refer to the Liability Statement in the ITEM for acceptable GSE equivalents.

I. Weight and Balance

WEIGHT MOMENT +2.6 pounds (+1.18 kg) +1808.40 pound−inches (+20.670kg−m) J. Electrical Load Data No change.

K. References − Bombardier Aerospace, Modification Summary, 100T010888, Rev. C.

− Bombardier Aerospace, Modification Summary, BB100T010888, Rev. E.

− Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C−100−000−32−0169, Rev. B.

− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.

− Bombardier Aerospace, Kit Drawing K1000070394, Rev. A.

− Bombardier Aerospace, SB 350−00−002, Service Bulletin Description and Policy.

− CH 350 Aircraft Maintenance Manual (AMM), Chapters 6, 12, 24, 29, 32 and 52.

− CH 350 Illustrated Tool and Equipment Manual (ITEM) Chapters 20, 24 and 29.

− CH 350 Structural Repair Manual (SRM), Chapter 51.

MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 5 of 22

L. Other Publications Affected CH 350 Aircraft Illustrated Parts Catalog (AIPC), Chapter 29.

M. Equivalent Service Bulletin For the Challenger 300 aircraft, use SB 100−32−31.

2. ACCOMPLISHMENT INSTRUCTIONS NOTE: All references made to zones, access panels and/or doors, are from the CH 350 AMM, Chapter 6.

A. Aircraft Setup NOTE: The steps in the Aircraft Set−Up section of this Service Bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator discretion.

(1) Obey all electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.

(2) Obey all the hydraulic safety precautions. Refer to AMM 29−00−00−910−801.

(3) Obey all the hydraulic technical precautions. Refer to AMM 29−00−00−910−802.

(4) Open and tag the circuit breakers that follow:

CB PANEL CB NO. NAME ZONE RCBP C11 L HYDRAULIC DC PUMP 212

(5) Release the hydraulic pressure from the LEFT hydraulic system. Refer to AMM 29−10−00−862−802.

(6) Open the Aft Equipment−Compartment door 182GL. Refer to AMM 52−41−00−010−801.

(7) Remove the Pack Discharge Duct. Refer to AMM 21−52−41−000−801.

B. Modification NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.

MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 6 of 22

(1) Locate the new support structure for the new filter as follows:

NOTE: For all the steps that follows, refer to Kit Drawing K1000070394.

(a) Make sure that the DCMP bracket assembly, Part No. 100534422, is properly supported to prevent any movement, per best shop practices.

(b) Locate intercostal, Part No. K1000070396−401, as shown in the "Bracket Installation" view and Section E−E for aircrafts 20407 and subs.

NOTE: Intercostal, Part No. K1000070396−401 is made from Intercostal, Part No. K1000070396−801. Refer to Figure 1 for trim detail.

Trim intercostal K1000070396−801 as shown in Figure 1.

Finish bare metal per Finish Code A032. Refer to SRM 51−01−04.

Identify trimmed intercostal as K1000070396−401 with permanent ink per best shop practices.

(c) Drill two pilot holes through stringer 14 L and intercostal, Part No.

K1000070396−401, and temporarily attach in place per best shop practices. Make sure to maintain a minimum 2 D edge distance and 4 D pitch in the intercostal. Refer to SRM 51−40−04.

(d) Locate clip, Part No. K1000070396−501, on stringer 15L. Refer to the "Bracket Installation" view, and section C−C.

(e) Drill two pilot holes through stringer 15L. SRM 51−40−04.

(f) Temporarily attach in place per best shop practices.

(g) Remove the two rivets, MS20470AD4 common to the intercostal, Part No.

1005354425, and the clip, Part No. 1005354429 as shown in zone 2B.

(h) Locate the filter mount lower bracket, Part No. K1000070396−301, as shown in the "Bracket Installation" view and in section D−D.

(i) Transfer drill the two existing holes from the clip, Part No. 1005354429 and intercostal, Part No. 1005354425, through the lower bracket, Part No.

K1000070396−301. Refer to SRM 51−40−04.

(j) Transfer drill the two pilot holes from the clip, Part No. K1000070396−501, through the intercostal, Part No. K1000070396−401, and lower bracket, Part No. K1000070396−301. Make sure you maintain a minimum 2 D edge distance in the intercostal, and in the lower bracket. Refer to Section C−C and SRM 51−40−04.

(k) Temporarily attach in place per best shop practices.

(l) Locate the filter mounting plate assembly, Part No. K1000070396−101, on the lower bracket, Part No. K1000070396−301. Refer to the "Bracket Installation" view, Section D−D and Detail F for location references.

(m) Drill the four pilot holes from the filter mounting plate assembly, Part No.

K1000070396−101, through the lower bracket, Part No.

K1000070396−301. Refer to Section D−D and SRM 51−40−04.

MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 7 of 22

(n) Temporarily attach in place per best shop practices.

(o) Locate the upper bracket, Part No. K1000070396−201, on the intercostals, Part No. K1000070396−401 and 1005354425, and under the filter mounting plate assembly, Part No. K1000070396−101, as shown in the "Bracket Installation" view and Section E−E.

(p) Drill the five pilot holes from the filter mounting plate assembly, Part No.

K1000070396−101, through the upper bracket, Part No.

K1000070396−201. Refer to Section E−E, and SRM 51−40−04.

(q) Temporarily attach in place per best shop practices.

(r) Open all the fastener holes to the appropriate size as necessary. Refer to the "Bracket Installation" view and Section D−D and E−E, for fasteners call out. Refer to SRM 51−40−04.

(s) Dismantle and deburr all the parts.

NOTE: Make sure that the DCMP bracket assembly, Part No.

1005354422, remains properly supported.

(2) Install the support structure for the new filter as follows:

(a) Install the filter mounting plate assembly, Part No. K1000070396−101, on the filter mount lower bracket, Part No. K1000070396−301, and upper bracket, Part No. K1000070396−201. Refer to Section D−D and E−E, for fastener call out and to SRM 51−42−08.

(b) Install the the clip, Part No. K1000070396−501, on stringer 15L. Refer to section D−D for fastener call out and SRM 51−42−08.

(c) Install the filter mounting plate, Part No. K1000070396−101, with the lower bracket, Part No. K1000070396−301, and upper bracket, Part No.

K1000070396−201, attached to it, on the intercostal, Part No.

K1000070396−401. Refer to the "Bracket Installation" view, for fastener call out and SRM 51−42−08.

(d) Install the fasteners common to the intercostal, Part No.

K1000070394−401 and stringer 14L. Refer to section E−E, and SRM 51−42−20.

(e) Install the fasteners common to the upper bracket, Part No.

K1000070396−201, and the intercostal 1005354425. Refer to the "Bracket Installation" view, for fasteners call out and SRM 51−42−20.

(f) Install the fasteners common to the lower bracket, Part No.

K1000070396−301, the intercostals and the clips. Refer to the "Bracket Installation" view, for fastener call out and SRM 51−42−20.

(g) Locate and install the pipe support bracket assembly, Part No.

K1000070396−601, on case drain filter bracket assembly, Part No.

1005354444 at FS 688.45. Refer to section A−A, and SRM 51−42−20.

(h) Touch up reworked areas, if required, per finish code A032. Refer to SRM 51−01−04.

NOTE: Topcoat color, White Gloss #17875. Refer to SRM 51−01−08.

MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 8 of 22

(i) Touch up all fasteners topcoat color White Gloss # 17875. Refer to SRM 51−01−08.

(3) Put the hydraulic fluid container below the work area.

(4) Remove and discard existing tube assemblies as follows:

(a) Remove and discard tube assembly, Part No. 1005354140. Refer to the "Pre−Mod" view, zone 2B.

(b) Put protection caps on the fittings to prevent contamination.

(c) Remove and discard tube assemblies, Part No. 1005354124 and 1005354123. Refer to the "Pre−Mod Looking Aft" view, zone 3C.

NOTES: 1. Remove and discard the lower clamp, Part No. M85052/2−4 and install again the attaching hardware. Refer to Detail G.

2. Remove the upper clamp, Part No. M85052/2−4 and keep with the attaching hardware for installation of the new tube.

Refer to the "Pre−Mod Looking Aft" view, zone 3.C.

CAUTION: DO NOT CUT TUBING WITH A SAW. THIS CAN CAUSE

LOOSE CHIPS TO GO INTO THE TUBING AND CAUSE CONTAMINATION OF THE SYSTEM.

(d) Cut tube assembly, Part No. 1005354125 at the location shown in Detail G, and discard the upper section attached to the tee connector.

Refer to SPM−MM 20−22−00−910−805.

NOTE: Identify the section of the tube assembly that is kept as K1000070394−101, per best shop practices.

(e) Put protection caps on the fittings and the cut portion of tube assembly, Part No. 1005354125 to prevent contamination.

(5) Install the new hydraulic filter and tube assemblies as follows:

(a) Install the new hydraulic filter, Part No. 945170−3, with the bolts, Part No.

NAS6204−32, and washers, Part No. NAS1149D0432J on the filter mounting plate assembly. Refer to section B−B.

NOTE: Apply a small bead of sealant on the mating surface of the filter.

Refer to section B−B and SPM−MM 51−23−00−02

(b) Torque the bolts, 50 to 70 lbf in (5.65 to 7.90 Nm). Refer to SPM−MM 20−21−00−910−801.

(c) Do the electrical bonding test of the filter. Refer to SPM−MM 51−80−00−760−801.

(d) Apply sealant on the head of bolts. Refer to SPM−MM 51−23−00−390−810.

(e) Apply humiseal on the nut plates and the threaded part of the bolts. Refer to section B−B, and SPM−MM 51−80−00−390−801.

(f) Install elbow assembly, Part No. B0302126−04, hand tight, on the "IN" fitting of the new filter. Refer to the "Filter Inst" view, zone 8B.

MODEL BD−100−1A10 (CH−350) Basic Issue: Jan 04/2018 Revision 03: Mar 27/2018 350−32−007 Page 9 of 22