Service bulletin · Bombardier

No revision namedSB 350-36-003 · 57 pages · 3.4 MB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-1890; AD 2023-26-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-1890 (document 0005) · AD 2023-26-02

Manufacturer
Bombardier
Type
Service Bulletin
Number
350-36-003

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 57

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-1890; AD 2023-26-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'aea018f9f6497d35f45b18139298f0a2071368ba4ee2ed3adefbcff39650a960'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

SPECIAL CHECK – BLEED-AIR LEAK-DETECTION SYSTEM –

FUNCTIONAL CHECK OF BLEED LEAK-DETECTION ELEMENTS The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.

RECOMMENDED

SPECIFIED TIME COMPLIANCE

COMPLIANCE TIME Within 96 months or 7500 flight cycles whichever comes first from this Service Bulletin release date (Basic Issue) EFFECTIVITY: A/C Serial No. 20501 to 20906 MANPOWER: Refer to Paragraph 1.F.

CONTINUED AIRWORTHINESS (CAW)

FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO

TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO

DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin may be subjected to an Airworthiness Directive, which will make it necessary to implement this Service Bulletin.

To place an order for parts, please call Bombardier Aviation Parts Services at:

514−855−2999 or 1−866−538−1247

SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL BD−100−1A10 (CH−350) ATA 36−21

PNEUMATIC Basic Issue: Dec 23/2022 350−36−003 Page 1 of 1 This Service Bulletin is available at:

SPECIAL CHECK – BLEED-AIR LEAK-DETECTION SYSTEM –

FUNCTIONAL CHECK OF BLEED LEAK-DETECTION ELEMENTS

1. PLANNING INFORMATION NOTES: 1. To reduce operator downtime due to aircraft set−up, access, close−out and return to service testing, Bombardier is recommending that the work is done at the 96 month scheduled maintenance event while still respecting the Service Bulletin compliance time. Refer to Paragraph 1.F.

2. Two persons are necessary to perform this Service Bulletin. However, a third person may be required to assist with heat gun operation.

3. Do not perform this test procedure when the ambient temperature around the aircraft is below 0°C (32°F).

4. Send all Test Results to Bombardier Customer Support Engineering through the SRPSA form to SRPSA@aero.bombardier.com or through Salesforce for BAS Facilities.

5. Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.

A. Effectivity BD−100−1A10 aircraft, Serial No. 20501 to 20906.

NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aviation Service Bulletin(s).

SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL BD−100−1A10 (CH−350) ATA 36−21

PNEUMATIC Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

 2022 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.

Basic Issue: Dec 23/2022 350−36−003 Page 1 of 54 This Service Bulletin is available at:

B. Reason

1. Condition:

Some of the Leak Detection Loop (LDL) sensing elements supplied by Kidde Aerospace & Defense may be non−conforming. These LDL sensing elements present a risk due to the inability to detect a bleed air leak event at the specified temperatures.

Appendix B presents a summary of the LDL sensing element P/Ns impacted and locations.

2. Evidence:

Deficiencies in the manufacturer’s Acceptance Test Procedure (ATP), allowed for non−conforming LDL sensing elements to pass as good units.

3. Objective/Benefit:

This Service Bulletin introduces an on−wing test procedure to test the serviceability (examine the functionality) of each LDL sensing element installed on the aircraft and to replace those that have failed.

C. Description This Service Bulletin gives instructions in PART A for A/C 20501 to 20906 to:

− Gain access and test the LDL sensing elements on the left wing.

This Service Bulletin gives instructions in PART B for A/C 20501 to 20906 to:

− Gain access and test the LDL sensing elements on the right wing.

This Service Bulletin gives instructions in PART C for A/C 20501 to 20900 to:

− Gain access and test the LDL sensing elements at left center fuselage (over wing).

This Service Bulletin gives instructions in PART D for A/C 20501 to 20900 to:

− Gain access and test the LDL sensing elements at right center fuselage (over wing).

This Service Bulletin gives instructions in PART E for A/C 20501 to 20888 to:

− Gain access and test the LDL sensing elements at rear fuselage (aft belly fairing).

This Service Bulletin gives instructions in PART F for A/C 20501 to 20900 to:

− Gain access and test the LDL sensing elements in the rear equipment bay.

This Service Bulletin gives instructions in PART G for A/C 20501 to 20888 to:

− Gain access and test the LDL sensing elements located inside the pressurized cabin, in the underfloor (under the baggage compartment).

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 2 of 54

D. Compliance Recommended within 96 months or 7500 flight cycles whichever comes first from this Service Bulletin release date (Basic Issue).

NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the aircraft configuration, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin. Standard SRPSA fees may apply. Refer to the Services section of the Bombardier customer portal for the latest prices, rates and fees.

E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.

NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.

2. The technical content of this Service Bulletin is accepted by EASA under the Canada/EU bilateral Aviation Safety Agreement.

F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this Service Bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.

For more information related to the manpower, refer to SB 350−00−002.

2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the man−hours and should be considered for planning purposes before you schedule this Service Bulletin.

3. To reduce operator downtime due to aircraft set−up, access, close−out and return to service testing, Bombardier is recommending that the work is done at the 96 month scheduled maintenance event while still respecting the Service Bulletin compliance time. Refer to Paragraph 1.F.

1. If the aircraft is in scheduled heavy−maintenance: 15 total man−hours are necessary to complete this Service Bulletin.

2. If the aircraft is outside scheduled heavy−maintenance: 76 total man−hours are necessary to complete this Service Bulletin. The breakdown of the man−hours is as follows:

− 2 man−hours are necessary to do Aircraft Setup of this Service Bulletin.

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 3 of 54

− 10 man−hours are necessary to do PART A of this Service Bulletin.

− 10 man−hours are necessary to do PART B of this Service Bulletin.

− 9 man−hours are necessary to do PART C of this Service Bulletin.

− 9 man−hours are necessary to do PART D of this Service Bulletin.

− 16 man−hours are necessary to do PART E of this Service Bulletin.

− 9 man−hours are necessary to do PART F of this Service Bulletin.

− 9 man−hours are necessary to do PART G of this Service Bulletin.

− 2 man−hours are necessary to do Testing of this Service Bulletin.

The labor required to do this Service Bulletin when the aircraft is in or outside scheduled heavy−maintenance is at no cost if:

− the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and − this Service Bulletin is scheduled in less than 96 months from its release date (Basic Issue).

G. Material − Cost and Availability No kit is necessary to do this special check. For material data refer to paragraph 3.C.

The parts in Paragraph 3.B. may be necessary to do this Service Bulletin.

The parts are available at no cost if:

− a no−charge purchase order is sent to Bombardier Aviation in less than 96 months from this Service Bulletin release date (Basic Issue).

NOTE: If material coverage is required due to part failure, a scrap certificate will be required. Claims will not be approved without the necessary scrap certificate. Please see scrap certificate form attached with Service Bulletin.

Smart Parts does not pay for this recommended Service Bulletin at any time.

H. Tooling The equipment and tools listed below are necessary to do this special check:

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available (See Note 4 and 5) Kit 173948 Testing Kit MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 4 of 54

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available (See Note 6) Fluke 289 (or equivalent) Digital Multi Meter (Type K input 0−594°C (32−1101.2°F), Accuracy of ±2.2°C (±8.3°F) or

0.75%, 0−40°C (32−104°F) operating temp) Commercially Available (See Note 6) STEINEL Model HG 2620 E, HG 2220 E (or equivalent) Heat Gun (capable of 350°C (662°F) hot air delivery with tolerence of ±5°C or 10°F) Commercially Available (See Note 6) − K Type Thermocoupler(or equivalent) Commercially Available − Marker (Green Sharpie Marker or equivalent permanent marker) Commercially Available − Scraper, Non−Metallic Commercially Available − Sharp Knife Commercially Available (See Note 6) 110048645 or 07051 STEINEL Heat Gun Nozzle Deflector Commercially Available (See Note 6) − Timer with 1 second resolution or less (watch, stopwatch) Commercially Available − Walkie Talkies Commercially Available − Wrench, Torque 18 to 22lbf in (2.03 to 2.49 Nm) Commercially Available − Wrench, Torque 20 to 25 lbf in (2.26 to

2.82 Nm) Commercially Available − Wrench, Torque 50 to 60 lbf in (5.65 to

6.77 Nm) MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 5 of 54

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Wrench, Torque 60.19 to

73.46 lbf in (6.81 to

8.30 Nm) NOTES: 1. Refer to the BD−100 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.

2. Refer to the Liability Statement in the ITEM for the BD−100 for acceptable GSE equivalents.

3. This list is provided for a quick reference. In case of discrepancy between this list and the tool called out in the SPM−WM, Chapter 20, then the tool called in the SPM−WM will prevail. Other approved alternative tools are acceptable and can also be used.

4. Operator can order kit 173948 from Collins Aerospace, which contains digital multimeter, heat gun, K type thermocoupler, STEINEL heat gun nozzle deflector and timer needed to perform testing.

5. The content, details and ordering information of kit 173948 is available in LTS VSB No. CFD−F1958−26−1.

6. The component can be obtained separately.

I. Weight and Balance No change.

J. Electrical Load Data No change.

K. References − TCCA Airworthiness Directive, (pending).

− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−100−000−36−0006, Rev. B.

− Liebherr, Vendor Service Bulletin (LTS VSB), CFD−F1958−26−01, Initial Issue, dated 6 May 2022.

− Bombardier Aviation, Standard Practices Manual (SPM), Chapter 20.

− CH 350 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 36, 53 and 54.

− Appendix A − Test Results.

− Appendix B − Test Matrix.

− Appendix C − Test Locations.

− Bleed−Loop Scrap Certificate (attached).

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 6 of 54

L. Other Publications Affected None.

M. Equivalent Service Bulletin − For the Challenger 300 aircraft, use Service Bulletin 100−36−10.

2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the BD−100 Aircraft Maintenance Manual unless otherwise specified.

2. All references made to zones, access panels and/or doors, are from the BD−100 Aircraft Maintenance Manual, Chapter 6.

3. Refer to Appendix B to determine which LDL sensing element requires to be tested based on aircraft effectivity.

A. Aircraft Setup

(1) Obey all electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.

(2) Obey all the bleed−air leak−detection and warning system safety−precautions.

Refer to AMM 36−21−00−910−801.

(3) Do the standard aircraft configuration for maintenance. Refer to AMM 12−00−00−867−803.

PART A (For A/C 20501 to 20906)

(4) Remove the LH leading edge access panels (from 522AL to 528DL). Refer to AMM 57−41−09−000−801.

PART B (For A/C 20501 to 20906)

(5) Remove the RH leading edge access panels (from 622AR to 628DR). Refer to AMM 57−41−09−000−801.

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 7 of 54

SB350−36−003_001 Example of Access to Leak Detection Elements − Mid Board Wing Figure 1 PART C (For A/C 20501 to 20900)

(6) Remove the main landing gear (MLG) wheel−bin fairings (171AZ and 171BZ).

Refer to AMM 53−32−01−000−801.

(7) Remove the over−wing fairings (183AL and 183BL). Refer to AMM 53−63−13−000−801.

(8) Remove the forward wing−to−fuselage fairings (181AL). Refer to AMM 53−63−01−000−801.

NOTE: Removal of forward wing−to−fuselage fairings (181AL) is not required if this Service Bulletin is done outside of an heavy maintenance. In that case the first loop test need to be done forward of the overwing.

PART D (For A/C 20501 to 20900)

(9) Remove the main landing gear (MLG) wheel−bin fairings (172AZ and 172BZ).

Refer to AMM 53−32−01−000−801.

(10) Remove the over−wing fairings (183AR and 183BR). Refer to AMM 53−63−13−000−801.

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 8 of 54

(11) Remove the forward wing−to−fuselage fairings (181AR). Refer to AMM 53−63−01−000−801.

NOTE: Removal of forward wing−to−fuselage fairings (181AR) is not required if this Service Bulletin is done outside of an heavy maintenance. In that case the first loop test need to be done forward of the overwing.

PART E (For A/C 20501 to 20888)

(12) Remove the aft wing−to−fuselage fairings (182CL/182CR). Refer to AMM 53−63−09−000−801.

(13) Remove the aft maintenance access panel (182BL). Refer to AMM 53−63−17−000−802.

PART F (For A/C 20501 to 20900)

(14) Open the AFT equipment−compartment door (182GL). Refer to AMM 52−41−00−010−801.

PART G (For A/C 20501 to 20888)

(15) Open the baggage door (834).

(16) Remove the AFT fuselage floor−panel (241ALF). Refer to AMM 53−41−01−000−801.

B. PART A — Special Check — LDL Sensing Elements Test on the Left Wing NOTES: 1. Applicable to aircraft Serial No. 20501 to 20906.

2. Both elements must be heated at approximately same time.

3. CAS message will be posted when each LDL sensing element in the loop reaches the temperature set point specified in Table 1 for salt type N.

(1) Do the aircraft general test setup per Paragraph 2.I.

(2) Do the heat gun temperature verification per Paragraph 2.J.

(3) Do the cockpit preparation per Paragraph 2.K.

(4) For each LDL sensing element, refer to Appendix A and Figure 10, for the location of each test point.

(5) For all test point locations, test each element per Paragraph 2.L. (Detailed Test Procedure − Single and Dual Loops).

(6) If a test point FAILS per Paragraph 2.L., test the failed test point again per Paragraph 2.M. (Detailed Test Procedure − Dual Loop Troubleshooting).

(7) If necessary, replace the failed LDL sensing element by a conforming one.

(8) Install the applicable panels from the areas that were tested.

(9) Repeat the cockpit preparation per Paragraph 2.K.

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 9 of 54

C. PART B — Special Check — LDL Sensing Elements Test on the Right Wing NOTES: 1. Applicable to aircraft Serial No. 20501 to 20906.

2. Both elements must be heated at approximately same time.

3. CAS message will be posted when each LDL sensing element in the loop reaches the temperature set point specified in Table 1 for salt type N.

(1) Do the aircraft general test setup per Paragraph 2.I.

(2) Do the heat gun temperature verification per Paragraph 2.J.

(3) Do the cockpit preparation per Paragraph 2.K.

(4) For each LDL sensing element, refer to Appendix A and Figure 10 for the location of each test point.

(5) For all test point locations, test each element per Paragraph 2.L. (Detailed Test Procedure − Single and Dual Loops).

(6) If a test point FAILS per Paragraph 2.L., test the failed test point again per Paragraph 2.M. (Detailed Test Procedure − Dual Loop Troubleshooting).

(7) If necessary, replace the failed LDL sensing element by a conforming one.

(8) Install the applicable panels from the areas that were tested.

(9) Repeat the cockpit preparation per Paragraph 2.K.

D. PART C — Special Check — LDL Sensing Elements Test at Left Center Fuselage (Over Wing) NOTES: 1. Applicable to aircraft Serial No. 20501 to 20900.

2. Both elements must be heated at approximately same time.

3. CAS message will be posted when each LDL sensing element in the loop reaches the temperature set point specified in Table 1 for salt type A.

(1) Do the aircraft general test setup per Paragraph 2.I.

(2) Do the heat gun temperature verification per Paragraph 2.J.

(3) Do the cockpit preparation per Paragraph 2.K.

(4) For each LDL sensing element, refer to Appendix A and Figure 9 for the location of each test point.

(5) For all test point locations, test each element per Paragraph 2.L. (Detailed Test Procedure − Single and Dual Loops).

(6) If a test point FAILS per Paragraph 2.L., test the failed test point again per Paragraph 2.M. (Detailed Test Procedure − Dual Loop Troubleshooting).

(7) If necessary, replace the failed LDL sensing element by a conforming one.

(8) Install the applicable fairings/panels from the areas that were tested.

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 10 of 54

(9) Repeat the cockpit preparation per Paragraph 2.K.

E. PART D — Special Check — LDL Sensing Elements Test at Right Center Fuselage (Over Wing) NOTES: 1. Applicable to aircraft Serial No. 20501 to 20900.

2. Both elements must be heated at approximately same time.

3. CAS message will be posted when each LDL sensing element in the loop reaches the temperature set point specified in Table 1 for salt type A.

(1) Do the aircraft general test setup per Paragraph 2.I.

(2) Do the heat gun temperature verification per Paragraph 2.J.

(3) Do the cockpit preparation per Paragraph 2.K.

(4) For each LDL sensing element, refer to Appendix A and Figure 9 for the location of each test point.

(5) For all test point locations, test each element per Paragraph 2.L. (Detailed Test Procedure − Single and Dual Loops).

(6) If a test point FAILS per Paragraph 2.L., test the failed test point again per Paragraph 2.M. (Detailed Test Procedure − Dual Loop Troubleshooting).

(7) If necessary, replace the failed LDL sensing element by a conforming one.

(8) Install the applicable fairings/panels from the areas that were tested.

(9) Repeat the cockpit preparation per Paragraph 2.K.

F. PART E — Special Check — LDL Sensing Elements Test at Rear Fuselage (Aft Belly Fairing) NOTES: 1. Applicable to aircraft Serial No. 20501 to 20888.

2. Both elements must be heated at approximately same time.

3. CAS message will be posted when each LDL sensing element in the loop reaches the temperature set point specified in Table 1 for salt type A.

(1) Do the aircraft general test setup per Paragraph 2.I.

(2) Do the heat gun temperature verification per Paragraph 2.J.

(3) Do the cockpit preparation per Paragraph 2.K.

(4) For each LDL sensing element, refer to Appendix A and Figure 9 for the location of each test point.

(5) For all test point locations, test each element per Paragraph 2.L. (Detailed Test Procedure − Single and Dual Loops).

(6) If a test point FAILS per Paragraph 2.L., test the failed test point again per Paragraph 2.M. (Detailed Test Procedure − Dual Loop Troubleshooting).

MODEL BD−100−1A10 (CH−350) Basic Issue: Dec 23/2022 350−36−003 Page 11 of 54