On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 20
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0790; AD 2019-08-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9e0c0cbb69a250d4ea841b25e174b7b6bb7bdb5afdaeeb9779ca98a7b377ee3e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9e0c0cbb69a250d4ea841b25e174b7b6bb7bdb5afdaeeb9779ca98a7b377ee3e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
605-29-001Page 1 of 2
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET MODEL CL-600-2B16 Discard Revision 03 of this Service Bulletin dated Apr 10/2012 and replace in its entirety with this Revision 04.
Service Bulletin No. 605-29-001 Date of Basic Issue Nov 10/2008 Revision No. 01 Dated Jul 06/2009 Revision No. 02 Dated May 10/2010 Revision No. 03 Dated Apr 10/2012 Revision No. 04 Dated Jun 10/2015 For action applicable to aircraft on which the Basic Issue, Revision 01, Revision 02, or Revision 03 of this Service Bulletin was done, refer to the retroactive action box on Page 1 of this Service Bulletin.
Do not sign the log book if you have not done this revision. Keep the previous log book entry. You may make an entry as “Not Applicable” for this revision.
This revision is issued to update the Service Bulletin to incorporate the latest changes related to the Restriction and/or Special Instruction (RSI), C-4011, Rev. F1.
The changes are as follows:
(1) Revise the Service Bulletin Summary Sheet, to incorporate the changes related to the latest Service Bulletin template.
(2) Revise the Service Bulletin Summary Sheet and Paragraph 1.A. to update the effectivity.
(3) Revise the Service Bulletin Summary Sheet, Paragraph 1 and Paragraph 1.D.
to add a reference NOTE applicable to the Airworthiness Directive (AD).
(4) Revise the Retroactive Action box to add revision 04 retroactive requirement.
MODEL CL-600-2B16 605-29-001Page 2 of 2
(5) Revise Paragraph 1.B. to clarify the reason.
(6) Revise Paragraph 1.D. to add reference to the Service Bulletin, Revision 04 and add an additional life limited accumulator’s part number.
(7) Revise Paragraph 1.G., NOTE 3 and Paragraph 2.B.(1), NOTE 3, to add an additional life limited accumulator’s part number.
(8) Change Paragraph 1.K, to update RSI C-4011 to Rev. F1, add references to Modification Summaries 600-6141, Rev. A, and 600-6271, Rev. A and add references to SB 605-29-002, SB 605-29-003, SB 605-29-004, SB 605-32-004 and SB 605-32-005.
(9) Change Paragraph 2.B. to add a NOTE, that refers to the applicable Service Bulletins required when the stock of “TNAE” accumulators is depleted.
(10) Make miscellaneous minor changes, as necessary, with no change of context.
Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 1 of 1 SERVICE BULLETIN SUMMARYThis Service Bulletin is available at:
www.cic.bombardier.com MODEL CL-600-2B16 ATA 29-11 ATA 32-43
HYDRAULIC POWER AND LANDING GEAR MODIFICATION – HYDRAULIC POWER AND LANDING GEAR – REPLACEMENT OF SYSTEM ACCUMULATORS NO. 1, NO. 2 AND NO. 3 AND BRAKE ACCUMULATORS NO. 2 AND NO. 3 FOR PART NOS. 08-60163-002 AND 08-60164-002 The information below is provided for your reference. For full details, please see corresponding paragraph contained within this bulletin.
RECOMMENDEDSPECIFIED TIME COMPLIANCE
COMPLIANCE TIME Refer to Paragraph 1.D.
EFFECTIVITY: A/C Serial No. 5701 to 5908 MANPOWER: 20 man-hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN YES NO TLMC, CH 5 AFFECTED YES NO KITS and/or PARTS YES NO
TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1.
YES NO
DEDICATED SCHEDULE YES NO PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin is mandated by Airworthiness Directive (AD) CF-2009-39 and FAA AD 2010-14-05.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514-855-2999 or 1-866-538-1247
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
©2008 - 2015 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 1 of 14 SERVICE BULLETINThis Service Bulletin is available at:
www.cic.bombardier.com MODEL CL-600-2B16 ATA 29-11 ATA 32-43
HYDRAULIC POWER AND LANDING GEAR MODIFICATION – HYDRAULIC POWER AND LANDING GEAR – REPLACEMENT OF SYSTEM ACCUMULATORS NO. 1, NO. 2 AND NO. 3 AND BRAKE ACCUMULATORS NO. 2 AND NO. 3 FOR PART NOS. 08-60163-002 AND 08-60164-002
RETROACTIVE ACTION · This Service Bulletin Revision 04 is not applicable, for aircraft that have replaced their accumulators and incorporated Revision 03 of this Service Bulletin.
· For aircraft that have not incorporated Revision 03 of this Service Bulletin but have incorporated the Basic Issue, Revision 01 or Revision 02 of this Service Bulletin and replaced their accumulators, this Service Bulletin Revision 04 remains applicable.
· For aircraft that have not incorporated Revision 03 of this Service Bulletin but have incorporated the Basic Issue, Revision 01 or Revision 02 of this Service Bulletin and have accumulators with more than 3650 flight cycles and have replaced their accumulators, this Service Bulletin Revision 04 must be incorporated within 100 flight cycles from the Service Bulletin Revision 01 Release, dated, Jul 06/2009.
· For aircraft that have not incorporated Revision 03 of this Service Bulletin but have incorporated the Basic Issue, Revision 01 or Revision 02 of this Service Bulletin and have accumulators with 3650 flight cycles or less and have replaced their accumulators, this Service Bulletin Revision 04 must be incorporated at 3750 flight cycles.
· Aircraft that have new accumulators with the suffix “TNAE” at the end of the serial number do not require replacement at 3750 flight cycles. Thus, this Service Bulletin will no longer be applicable.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 2 of 14
1. PLANNING INFORMATION NOTE: This Service Bulletin is mandated by Airworthiness Directive (AD) CF-2009- 39 and FAA AD2010-14-05.
A. Effectivity CL-600-2B16 aircraft, Serial No. 5701 to 5908.
All other subsequent CL-600-2B16 aircraft are scheduled for the modification in production (Ref.: Modification Summaries 600-6141 and 600-6271) NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.
B. Reason Field evidence has shown from the Regional jet family that the system and brake accumulator screw caps are susceptible to cracking after 3750 flight cycles. This could possibly lead to a screw cap and end cap release, which in turn may cause damage to the aircraft structure and/or systems. This Service Bulletin gives instructions to replace all the accumulators.
C. Description This Service Bulletin gives instructions to:
– Get access to system accumulators No. 1, No. 2 and No. 3, – Get access to brake accumulators No. 2 and No. 3, – Replace the affected accumulators, and – Do the necessary tests to make sure the system operates correctly.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 3 of 14 D. Compliance Accumulators (Vendor Part No. 08-60163-002 and BA Spec No. 601R75138-1) and (Vendor Part No. 08-60164-002 and BA Spec No. 601R75138-3) with no suffix or suffix, “T”, or “TNA”, found at the end of the serial number must be replaced at 3750 flight cycles (accumulator time).
For affected accumulators that have more than 3650 flight cycles at the release date of this Service Bulletin Revision 04, replace the affected accumulators within 100 flight cycles from the Service Bulletin Revision 01 Release, dated, Jul 06/2009.
NOTES: 1. Accumulators with the suffix “TNAE” at the end of the serial number are the latest version and do not require replacement at 3750 flight cycles. Thus, this Service Bulletin will no longer be applicable and the TLMC applies.
2. A life limit is applicable on all new (Vendor Part No. 08-60163-002 and BA Spec No. 601R75138-1) and (Vendor Part No. 08-60164-002 and BA Spec No. 601R75138-3) with the suffix “TNAE” at the end of the serial number and can be found in the Life Limits (Systems) section 5- 10-11 of the CL-605 Time Limits/Maintenance Checks (TLMC) manual.
3. This Service Bulletin is mandated by Airworthiness Directive (AD) CF-2009-39 and FAA AD 2010-14-05.
Due to a limited quantity of spare accumulators, we strongly suggest that the Service Bulletin be accomplished only at the due cycles.
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93-Q-02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by the JAA and by EASA in accordance with established procedures.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 4 of 14 F. Manpower NOTES: 1. The man-hours given are estimates to help you schedule the tasks given in this bulletin. The estimates are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the labor estimates and should be considered for planning purposes before you schedule this Service Bulletin.
20 man-hours are necessary to do each modification.
Bombardier does not pay for the labor to do the modification.
G. Material – Cost and Availability No kit is necessary to do this modification. For material data, refer to Paragraph 3.
NOTES: 1. Make sure that the replacement accumulators are new units that have the suffix “TNAE” at the end of the serial number. If you are receiving documents specifying that your accumulator is other than stated above, contact Bombardier Aerospace Parts Services, Montreal.
2. Accumulators with the suffix “TNAE” at the end of the serial number are the latest version and do not require replacement at 3750 flight cycles. Thus, this Service Bulletin will no longer be applicable.
3. A life limit is applicable on all new accumulators (Vendor Part No.
08-60163-002 and BA Spec No. 601R75138-1) and (Vendor Part No. 08-60164-002 and BA Spec No. 601R75138-3) with the suffix “TNAE” at the end of the serial number and can be found in the Life Limits (Systems) section 5-10-11 of the CL-605 Time Limits/Maintenance Checks (TLMC) manual.
4. Accumulators with no suffix, or “T”, or “TNA” at the end of the serial number, still require replacement at 3750 flight cycles.
For those aircraft in new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus does not pay for replacement accumulators at any time.
For those aircraft with affected accumulators that have less than 3650 cycles (accumulator time), Smart Parts Plus does not pay for the accumulators to accomplish this Service Bulletin.
For those aircraft out of new aircraft warranty with affected accumulators that have 3650 cycles or more (accumulator time) and require replacement in accordance with this Service Bulletin, Smart Parts Plus pays for the replacement accumulators.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 5 of 14 H. Tooling The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION 24-00-24 S4933959-501 Tag, Circuit Breaker Commercially Available - Container, Hydraulic Fluid NOTE: Refer to the CL-605 Illustrated Tool and Equipment Manual to make sure you use the correct equipment configuration.
I. Weight and Balance No change.
J. Electrical Load Data No change.
K. References – Bombardier Aerospace, Modification Summary, 600-6141, Rev. A.
– Bombardier Aerospace, Modification Summary, 600-6271, Rev. A.
– Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C-4011, Rev. F1.
– Bombardier Aerospace, SB 605-29-002 “Modification – Hydraulic System No. 1 and No. 2 – Replacement of the Hydraulic System No. 1 Accumulator”.
– Bombardier Aerospace, SB 605-29-003 “Modification – Hydraulic System No. 1 and No. 2 – Replacement of the Hydraulic System No. 2 Accumulator”.
– Bombardier Aerospace, SB 605-29-004 “Modification – Modification – Hydraulic System No. 3 – Replacement of the Hydraulic System No. 3 Accumulator”.
– Bombardier Aerospace, SB 605-32-004 “Modification – Main Landing Gear Brake System – Replacement of the Hydraulic System No. 2 Brake Accumulator”.
– Bombardier Aerospace, SB 605-32-005 “Modification – Main Landing Gear Brake System – Replacement of the Hydraulic System No. 3 Brake Accumulator”.
– CL-605 Aircraft Maintenance Manual (AMM), Chapters 6, 12, 24, 29 and 32.
L. Other Publications Affected – CL-605 Aircraft Illustrated Parts Catalog (AIPC), Chapter 29 and 32.
– CL-605 Time Limits/Maintenance Checks (TLMC), Chapter 5.
M. Equivalent Service Bulletins For the CL-600 Challenger aircraft, use SB 600-0742.
For the CL-601 Challenger aircraft, use SB 601-0597.
For the CL-604 Challenger aircraft, use SB 604-29-008.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 6 of 14
2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the CL-605 Aircraft Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the CL-605 Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to TASK 24-00-00-910-801.
(2) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE CBP-1 G2 HYD SYST AC PUMP CONT 2 221 CBP-1 A2 HYD PUMP 3B 221 CBP-1 A5 HYD PUMP 2B 221 CBP-2 A5 HYD PUMP 1B 222 CBP-2 G2 HYD SYST AC PUMP CONT 1 222 CBP-2 A2 HYD PUMP 3A 222 CBP-2 G4 HYD SYST AC PUMP CONT 3A 222 CBP-2 P2 HYD SYST AC PUMP CONT 3B 222
(3) Obey all the hydraulic safety precautions. Refer to TASK 29-00-00-910-801.
(4) Obey all the hydraulic technical precautions. Refer to TASK 29-00-00-910-802.
(5) Release the hydraulic pressure for the system accumulators that follow:
(a) For accumulators No. 1 and No. 2, refer to TASK 12-00-04-862-802.
(b) For accumulator No. 3, refer to TASK 12-00-04-862-804.
(6) Release the hydraulic pressure from the brake accumulators.
Refer to TASK 32-43-07-610-801.
(7) Remove the aft equipment compartment door, 311BB.
(8) Remove the lower nose compartment access panel, 121AL.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 7 of 14 B. Replacement of Hydraulic Accumulators NOTE: Part Nos. 08-60163-002 and 08-60164-002 are the only accumulators affected by this modification.
(1) For each 08-60163-002 and 08-60164-002 accumulator, replace the affected accumulators with new replacement accumulators of the same part number.
The new replacement accumulator serial numbers must have the suffix “TNAE” at the end of the serial number.
NOTES: 1. When you install a new replacement accumulator, make sure to start recording the flight cycles (since new) accordingly.
2. Aircraft that have the latest version accumulators with the suffix “TNAE” at the end of the serial number do not require replacement at 3750 flight cycles. Thus, this Service Bulletin will no longer be applicable.
3. A life limit is applicable on all new (Vendor Part No. 08-60163-002 and BA Spec No. 601R75138-1) and (Vendor Part No. 08-60164-002 and BA Spec No. 601R75138-3) with the suffix “TNAE” at the end of the serial number and can be found in the Life Limits (Systems) section 5-10-11 of the CL-605 Time Limits/Maintenance Checks (TLMC) manual.
4. If the stock of “TNAE” accumulators is depleted, new stainless steel accumulators must be installed via the Service Bulletins that follow:
SERVICE
BULLETIN TITLE 605-29-002 Modification – Hydraulic System No. 1 and No. 2 – Replacement of the Hydraulic System No. 1 Accumulator 605-29-003 Modification – Hydraulic System No. 1 and No. 2 – Replacement of the Hydraulic System No. 2 Accumulator 605-29-004 Modification – Hydraulic System No. 3 – Replacement of the Hydraulic System No. 3 Accumulator 605-32-004 Modification – Main Landing Gear Brake System – Replacement of the Hydraulic System No. 2 Brake Accumulator 605-32-005 Modification – Main Landing Gear Brake System – Replacement of the Hydraulic System No. 3 Brake Accumulator
(2) For removal of the brake accumulators, refer to TASK 32-43-07-000-801.
(3) For removal of system No. 1 and No. 2 accumulators, refer to TASK 29-11-28-000-801.
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 8 of 14
(4) For removal of system No. 3 accumulator, refer to TASK 29-12-25-000-801.
(5) For installation of the brake accumulators, refer to TASK 32-43-07-400-801.
(6) For installation of system No. 1 and No. 2 accumulators, refer to TASK 29-11-28-400-801.
(7) For installation of the system No. 3 accumulator, refer to TASK 29-12-25-400-801.
C. Testing
(1) Remove the tags and close the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE CBP-1 G2 HYD SYST AC PUMP CONT 2 221 CBP-1 A2 HYD PUMP 3B 221 CBP-1 A5 HYD PUMP 2B 221 CBP-2 A5 HYD PUMP 1B 222 CBP-2 G2 HYD SYST AC PUMP CONT 1 222 CBP-2 A2 HYD PUMP 3A 222 CBP-2 G4 HYD SYST AC PUMP CONT 3A 222 CBP-2 P2 HYD SYST AC PUMP CONT 3B 222
(2) Do a functional test of the Brake Accumulators. Refer to TASK 32-43-07-720-801.
(3) Do an operational test of Hydraulic Systems No. 1 and/or No. 2. Refer to TASK 29-10-00-710-801.
(4) Do an operational test of Hydraulic System No. 3. Refer to TASK 29-10-00-710-803.
D. Close-out
(1) Close or install access panels.
(2) Remove all tools, equipment and unwanted materials from the aircraft.
E. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are requesting your feedback. Please take a moment to fill out our easy on-line Service Bulletin survey:
http://csefeedback.aero.bombardier.com
MODEL CL-600-2B16 Basic Issue: Nov 10/2008 605-29-001Revision 04: Jun 10/2015 Page 9 of 14
3. MATERIAL INFORMATION A. Kit No kits required.
B. Parts The parts that follow may be necessary to do this Service Bulletin and are available from Bombardier Aerospace Parts Services, Montreal:
NEW PART NO.
QTY ITEM USED PART NO.
INSTRUCTIONS -
DISPOSITION (Vendor Part No.
08-60163-002) (BA Spec No.
601R75138-1)* 4 Accumulator (Vendor Part No.
08-60163-002) (BA Spec No.
601R75138-1)* **Discard old (Vendor Part No.
08-60164-002) (BA Spec No.
601R75138-3)* 1 Accumulator (Vendor Part No.
08-60164-002) (BA Spec No.
601R75138-3)* **Discard old NAS1612-5 2 O-Ring NAS1612-5 Discard old NAS1612-8 2 O-Ring NAS1612-8 Discard old NAS1602-905 1 O-Ring NAS1602-905 Discard old NAS1602-908 1 O-Ring NAS1602-908 Discard old NOTES: 1. The part numbers with the asterisks (*) are Bombardier Specification equivalent part numbers.
2. Make sure that the replacement accumulators are new units that have the suffix “TNAE” at the end of the serial number. If you’re receiving documents specifying that your accumulator is other than stated above, contact Bombardier Aerospace Parts Services, Montreal.
3. The part numbers for the items listed above are subject to change without revision to this Service Bulletin. In case of discrepancy between this list and any other list, the Illustrated Parts Catalog prevails and shall be used to determine the latest part number.
4. **If replacing the accumulator due to in-service failure and if requesting parts warranty consideration, in accordance with Bombardier Parts Services policies, please make sure that the removed accumulator is returned to Bombardier with properly completed Material Return Authorization form .