On this page
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 17
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2021-0462; AD 2021-20-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '84a379763334a453fc2b1e11efdf4991fb400fa3ef08ff9826b403c4b57044bd' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '84a379763334a453fc2b1e11efdf4991fb400fa3ef08ff9826b403c4b57044bd' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Jan 05/2021 605-32-007Page 1 of 1
SERVICE BULLETIN INFORMATION SHEET MODEL CL-600-2B16 ATA 32−32
LANDING GEAR
SPECIAL CHECK - MAIN LANDING GEAR - LUBRICATION AND INSPECTION OF LH/RH MAIN LANDING GEAR (MLG) SHOCK STRUT LOWER PIN 19146-3 Service Bulletin No.: 605-32-007 Issue: Basic Dated: Jun 30/2020 The following data is supplied for information only. No revision to the Service Bulletin is necessary.
Keep this Information Sheet and Information Sheet dated Jul 30/2020 with subject Service Bulletin.
This Information Sheet is issued to inform operators that the TCCA Airworthiness Directive, CF-2020-54R1 is now attached to this Service Bulletin.
The reference in Paragraph 1.K. is updated to read as follows:
1.K. References − TCCA Airworthiness Directive, CF-2020-54R1 (attached).
Jul 30/2020 605-32-007Page 1 of 1
SERVICE BULLETIN INFORMATION SHEET MODEL CL-600-2B16 ATA 32−32
LANDING GEAR
SPECIAL CHECK - MAIN LANDING GEAR - LUBRICATION AND INSPECTION OF LH/RH MAIN LANDING GEAR (MLG) SHOCK STRUT LOWER PIN 19146-3 Service Bulletin No.: 605-32-007 Issue: Basic Dated: Jun 30/2020 The following data is supplied for information only. No revision to the Service Bulletin is necessary.
Keep this Information Sheet with subject Service Bulletin.
This Information Sheet is issued to inform operators that the Safran Landing Systems Service Bulletin SB19090−32−9 is now attached to this Service Bulletin.
The reference in Paragraph 1.K. is updated to read as follows:
1.K. References − Safran Landing Systems, Service Bulletin SB19090 −32−9 (attached).
SPECIAL CHECK - MAIN LANDING GEAR - LUBRICATION AND INSPECTION OF LH/RH MAIN LANDING GEAR (MLG) SHOCK STRUT LOWER PIN 19146-3 The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME Refer to Paragraph 1.D.
EFFECTIVITY: A/C Serial No 5701 to 5988 MANPOWER: Refer to Paragraph 1.F.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION NOYES
DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aviation Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL CL−600−2B16 ATA 32−32
LANDING GEAR Basic Issue: Jun 30/2020 605−32−007 Page 1 of 1 This Service Bulletin is available at:
SPECIAL CHECK - MAIN LANDING GEAR - LUBRICATION AND INSPECTION OF LH/RH MAIN LANDING GEAR (MLG) SHOCK STRUT LOWER PIN 19146-3
1. PLANNING INFORMATION NOTE: Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.
A. Effectivity CL−600−2B16 aircraft, Serial No. 5701 to 5988.
NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aviation Service Bulletin(s).
B. Reason Reports found the Main Landing Gear (MLG) trailing arm to shock strut lower pin cracked due to torsion loading of the joint.
The Service Bulletin gives instructions to increase lubrication frequency using Aeroshell 7 only. It introduces a new periodic Detail Visual Inspection (DVI) and a new periodic Non Destructive Testing (NDT) inspection to detect crack/damage on the LH/RH Main Landing Gear (MLG) shock strut lower pin Part No. 19146−3. It also gives instructions to replace the shock strut lower pin Part No. 19146−3 if any crack/damage is found.
C. Description This Service Bulletin gives instructions in:
SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL CL−600−2B16 ATA 32−32
LANDING GEAR Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
2020 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Jun 30/2020 605−32−007 Page 1 of 12 This Service Bulletin is available at:
PART A, to:
− Do the lubrication of the LH/RH Main Landing Gear (MLG) shock strut lower pin Part No. 19146−3, and − Do the installation of the label Part No. 40962−1 on the shock strut assembly, per Safran Landing Systems, Service Bulletin SB19090−32−9.
PART B, to:
− Do the DVI of the shock strut lower pin Part No. 19146−3, and − Do Part D if crack/damage is found on the shock strut lower pin Part No.
19146−3, and do the testing.
− Do the Close−Out if no crack/damage is found on the shock strut lower pin Part No. 19146−3.
PART C, to:
− Do the NDT inspection of the shock strut lower pin Part No. 19146−3, per Safran Landing Systems, Service Bulletin SB19090−32−9.
− Do Part D if crack/damage is found on the shock strut lower pin Part No.
19146−3, and do the testing.
− Do the testing if no crack/damage is found on the shock strut lower pin Part No.
19146−3.
PART D, to:
− Do the replacement of the cracked/damaged shock strut lower pin Part No.
19146−3, per Safran Landing Systems, Service Bulletin SB19090−32−9.
Testing, to:
− Do the necessary tests to make sure that the system operates correctly.
MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 2 of 12
D. Compliance Recommended − Refer to the Specified Time of Compliance details in the table below:
ACTIONS COMPLIANCE TABLE EFFECTIVE FROM THIS SERVICE
BULLETIN RELEASE DATE (BASIC ISSUE)
LUBRICATION
SB PART & ACTION
FIRST LUBRICATION REPEATLUBRICATION PART A Lubrication of MLG Shock Strut Lower Joint 200 Flight Hours or 12 months, whichever comes first from release date of this Service Bulletin (Basic Issue) 200 FH or 12 months, whichever comes first
INSPECTIONS
SB PART & ACTION
FLIGHT CYCLES (FC) FIRST
INSPECTION REPEAT
INSPECTION PART B Detailed Visual Inspection (DVI) NOTE: DVI not required if it coincides with the NDT inspection.
The NDT inspection supersedes the DVI inspection Below 600 FC No later than750 FC Every 400 FH or 24 months, whichever comes first (every second lubrication interval) Above 600 FC Within 150 FC PART C Non−Destructive Testing (NDT) Eddy Current or Liquid Penetrant or Magnetic Particle Below 1200 FC No later than1500FC Every 900 FCAbove 1200 FCand below 2000 FC Within 300 FC, or 2200 FC whichever comes first Above 2000 FC within 200 FC MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 3 of 12
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by the EASA under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this Service Bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower, refer to SB 605−00−002.
2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the man−hours and should be considered for planning purposes before you schedule this Service Bulletin.
1 man−hour is necessary to do PART A of this Service Bulletin.
2 man−hours are necessary to do PART B of this Service Bulletin.
4 man−hours are necessary to do PART C of this Service Bulletin.
3 man−hours (per side) are necessary to do PART D of this Service Bulletin.
Bombardier Aviation does not pay for the labor to do this Service Bulletin.
G. Material − Cost and Availability No kit is necessary to do this modification.
The parts in Paragraph 3.B. are necessary to do this modification.
If a pin is found cracked, the pin replacement will be Free of Charge for aircraft in warranty Bombardier Aerospace does not pay for parts for the pin replacement, for aircraft out of warranty.
MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 4 of 12
For all parts transactions, Bombardier Aviation’s current Spare Parts and Component Repair Price Catalogue General Terms and Conditions apply. These terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com For those aircraft in new aircraft warranty at the time of service bulletin distribution, Smart Parts does not pay for the parts at any time.
For those aircraft out of new aircraft warranty at the time of service bulletin distribution, Smart Parts pays for P/N: 19146−3 if found cracked/damaged.
H. Tooling The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION 24−00−24 S4933959−501 Tag, Circuit Breaker − Red Commercially Available − Fluid Container Commercially Available − Grease Gun (Non−pneumatic) Commercially Available − Hose, Transparent Plastic(Flexible) Commercially Available − Flashlight for DVI Inspection(See Note 4) Commercially Available − Mirror for DVI Inspection(See Note 4) Commercially Available − Torque Wrench 50 to 60 lbf in(5.56 to 6.77 Nm) NOTES: 1. Refer to the CL−605 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for the CL−605, for acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy between this list and the tools called in the SPM, WM, Chapter 20, then the tools called in the SPM−WM prevail. Other approved alternative tools are acceptable and can also be used.
4. This tool is only required for PART B of this Service Bulletin.
I. Weight and Balance No change.
MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 5 of 12
J.
Electrical Load Data No change.
K. References − TCCA Airworthiness Directive (Pending).
− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−4262, Rev A.
− Safran Landing Systems, Service Bulletin SB19090−32−9. It can be downloaded at ’https://landingpad.safranmbd.com/lp/’.
− CL−605 Aircraft Maintenance Manual (AMM), Chapters 6, 7, 12, 24, 29 and 32.
− CL−605 Standard Practice Manual (SPM), Chapters 20 and 51.
− CL−605 Non Destructive Testing Manual (NDTM), Part 1.
L. Other Publications Affected None.
M. Equivalent Service Bulletins − For the Challenger 604 aircraft, use the Service Bulletin 604−32−030.
− For the Challenger 650 aircraft, use the Service Bulletin 650−32−004.
2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the CL−605 Aircraft Maintenance Manual unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the CL−605 Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup NOTE: The steps in the Aircraft Setup section of this Service Bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator’s discretion.
(1) Obey all the electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.
(2) Obey all the hydraulic safety precautions. Refer to AMM 29−00−00−910−801.
(3) Obey all the hydraulic technical precautions. Refer to AMM 29−00−00−910−802.
(4) Release the hydraulic pressure from the No. 2 system. Refer to AMM 12−00−04−862−802.
MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 6 of 12
(5) Release the hydraulic pressure from the No. 3 system. Refer to AMM 12−00−04−862−804.
(6) Remove the electrical power from the aircraft. Refer to AMM 24−00−00−861−802.
(7) Install a DO NOT OPERATE THE HYDRAULIC SYSTEM warning tag on the No. 2 and No. 3 hydraulic systems, on the HYDRAULIC control panel in the flight compartment.
(8) For PART C and D of this Service Bulletin:
(a) Lift the aircraft on jacks. Refer to AMM 07−10−01−581−801.
(b) Remove the MLG wheel(s) as necessary. Refer to AMM 32−41−01−000−801.
(c) Remove the brake unit(s) as necessary. Refer to AMM 32−43−19−000−801.
B. PART A − Lubrication of LH/RH MLG Shock Strut Lower Pin NOTES: 1. The lubrication of this pin shall be performed using Aeroshell 7 only.
If the previous lubrication was done with Aeroshell 33, at the first lubrication with Aeroshell 7, a complete purge of the Aeroshell 33 shall be accomplished before lubricating with Aeroshell 7. In this case, the next lubrication shall be done within 100 FH, and then continue as per the compliance time specified in the Table in Paragraph 1.D.
Compliance.
(1) Apply grease Aeroshell 7 to the lower joint of the MLG shock absorber. Refer to AMM 12−20−04−640−802
(2) Install the label Part No. 40962−1 on the shock strut assembly. Refer to Safran Landing Systems, Service Bulletin SB19090−32−9 for position.
NOTES: 1. This step is not required if this label is already there.
2. Unless otherwise instructed by Safran Landing Systems, Service Bulletin SB19090−32−9, seal edges of decal per SPM 20−80−05−400−801.
MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 7 of 12
C. PART B − DVI Inspection of LH/RH MLG Shock Strut Lower Pin
(1) Do the DVI inspection of the shock strut lower pin Part No. 19146−3 using a mirror and a flashlight. Refer to Figure 1, and do as follows:
(a) Remove the bolt and the end caps to gain access to the pin ends. Refer to Safran Landing Systems, Service Bulletin SB19090−32−9 for details.
NOTES: 1. Inspect the root of the radii of each of the anti−rotation tangs all around. Four (4) tangs per pin.
2. Inspect the inner diameter a minimum 0.50 inches (12.7 mm) deep.
3. Make sure there is no evidence of crack/damage.
(b) If any crack/damage is found on the shock strut lower pin Part No.
19146−3, then do PART D of this Service Bulletin.
(c) If no crack/damage is found on the shock strut lower pin Part No.
19146−3, then do the steps that follow:
(i) Do the lubrication of the shock strut lower pin as given in PART A.
(ii) Reinstall the end caps and bolt. Refer to Safran Landing Systems, Service Bulletin SB19090−32−9 for details.
(iii) Go to Paragraph 2.G., Close−Out.
D. PART C − Nondestructive Testing (NDT) Inspection of LH/RH MLG Shock Strut Lower Pin
(1) Do the Nondestructive Testing (NDT) inspection of the shock strut lower pin Part No. 19146−3. Refer to Safran Landing Systems, Service Bulletin SB19090−32−9.
NOTES: 1. For the Liquid Penetrant Inspection (LPI), refer to NDTM, Part 1, Section 8.
2. For the Magnetic Particle Inspection (MPI), refer to NDTM, Part 1, Section 7.
(2) Install Brake Unit(s). Refer to AMM 32−43−19−400−801.
(3) Install MLG wheel(s). Refer to AMM 32−41−01−400−801.
(4) Go to Paragraph 2.F., Testing.
E. PART D − Replacement of the LH/RH MLG Shock Strut Lower Pin NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis and get an approved disposition to complete this Service Bulletin.
(1) Remove and discard the cracked/damaged shock strut lower pin Part No.
19146−3, per Safran Landing Systems, Service Bulletin SB19090−32−9.
MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 8 of 12
(2) Install the new shock strut lower pin Part No. 19146−3 on the LH/RH MLG assembly. Refer to Safran Landing Systems, Service Bulletin SB19090−32−9.
(3) Lubricate the joint with grease aeroshell 7.
NOTE: Make sure the grease is distributed throughout the entire joint.
(4) Install Brake Unit(s). Refer to AMM 32−43−19−400−801.
(5) Install MLG wheel(s). Refer to AMM 32−41−01−400−801.
(6) Go to Paragraph 2.F., Testing.
F. Testing
(1) Lower the aircraft to the ground and remove the jacks. Refer to AMM 07−10−01−586−801.
(2) Connect and energize the electrical power to the aircraft. Refer to AMM 24−00−00−861−801.
(3) Remove the DO NOT OPERATE THE HYDRAULIC SYSTEM warning tag from the No. 2 and No. 3 hydraulic systems, on the HYDRAULIC control panel in the flight compartment.
(4) Bleed the MLG Brakes. Refer to AMM 32−43−00−870−801.
(5) Do the operational test of the MLG Brake System. Refer to AMM 32−43−00−710−801.
G. Close−out NOTE: The steps in the Close−out section of this Service Bulletin, except for the return−to−service tests, are recommended steps. The steps give a recommendation to install components removed during the Aircraft Setup.
This recommendation is to make sure that the aircraft is safe and ready to return to service. Alternative steps can be used at the operator’s discretion.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
H. Recording You can do each PART of this Service Bulletin independently. When any PART of this Service Bulletin are completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).
For information, correction(s), comment(s) and/or feedback regarding Service Bulletins released on the Customer Portal, please contact the Service Bulletin Group at the following email address:
bbad_SBgroup@aero.bombardier.com MODEL CL−600−2B16 Basic Issue: Jun 30/2020 605−32−007 Page 9 of 12