Service bulletin · Bombardier

No revision namedSB 605-32-010 · 13 pages · 107 KB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-1732; AD 2026-07-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2025-1732 (document 0007) · AD 2026-07-01

Manufacturer
Bombardier
Type
Service Bulletin
Number
605-32-010

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 13

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-1732; AD 2026-07-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'd6c10142894ff147ce73cb59a26b1b9e959763b9f106745cc6fbd2f49bf12073'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

MODIFICATION – NOSEWHEEL STEERING – REPLACEMENT OF POTENTIOMETER UNIVERSAL COUPLING (T16-6) SETSCREWS The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.

RECOMMENDED

SPECIFIED TIME COMPLIANCE

COMPLIANCE TIME Within 36 months from this Service Bulletin release date (Basic Issue) EFFECTIVITY: A/C Serial No. 5701 to 5990 MANPOWER: 4 man−hours

CONTINUED AIRWORTHINESS (CAW)

FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED YES NO KITS and/or PARTS YES NO

TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO

DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make it necessary to implement this Service Bulletin.

To place an order for parts or kit, please call Bombardier Aviation Parts Services at:

514−855−2999 or 1−866−538−1247

SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL CL−600−2B16 ATA 32−51

LANDING GEAR Basic Issue: Oct 30/2023 605−32−010 Page 1 of 1 This Service Bulletin is available at:

MODIFICATION – NOSEWHEEL STEERING – REPLACEMENT OF POTENTIOMETER UNIVERSAL COUPLING (T16-6) SETSCREWS

1. PLANNING INFORMATION NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.

2. The Time Limits/Maintenance Checks (TLMC) is impacted by this Service Bulletin. Refer to the applicable TLMC RS references.

3. After the incorporation of this Service Bulletin for any future rigging/part replacement of the NWS rudder potentiometer, Operators must use the content of TR 32−17, TR 32−18 and TR 32−19 or an AMM incorporating the intent of TR 32−17, TR 32−18 and TR 32−19 (new self−locking setscrew, new torque value and application of anaerobic retaining compound).

4. The AMM tasks referenced in SB 605−32−010 as “Post SB 605−32−010” shall be found in TR 32−17, TR 32−18 and TR 32−19 or in the AMM revision Incorporating the intent of TR 32−17, TR 32−18 and TR 32−19.

A. Effectivity CL−600−2B16 aircraft, Serial No. 5701 to 5990.

All other subsequent CL−600−2B16 aircraft are scheduled for the modification in production (Ref.: Modification Summary 600−13625).

NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aviation Service Bulletin(s).

SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL CL−600−2B16 ATA 32−51

LANDING GEAR Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

 2023 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.

Basic Issue: Oct 30/2023 605−32−010 Page 1 of 10 This Service Bulletin is available at:

B. Reason

1. Condition:

Due to rudder pedal potentiometer universal coupling setscrews possibly having inadequate torque, possibly no retaining compound and incorrect setscrew being used as well as possibly the re−use of self−locking setscrews (Part No.

MS18063−2).

2. Evidence:

There is one report of uncommanded steering resulting in lateral runway excursion due to the rudder pedal potentiometer universal coupling not properly clamping the potentiometer shaft. This resulted in the pedals moving the potentiometer in one direction only (ratcheting). Due to normal repeated usage at landing, the potentiometer was not following pedal command.

3. Objective/Benefit:

The Service Bulletin instructs to replace the T16−6 coupling setscrews, application of anaerobic retaining compound and rigging of nosewheel steering alignment if required and also replace the coupling if necessary.

C. Description This Service Bulletin gives instructions to:

− Gain access to potentiometer universal coupling, − Visually inspect the coupling for any damage and replace if necessary, − Remove and discard the existing setscrews (one at a time), − Install the new setscrews (one at a time), − Verify the rudder pedal potentiometer voltage and rig if necessary, − If required, replace the potentiometer, and − Do the necessary tests to make sure that the system operates correctly.

D. Compliance Recommended within 36 months from this Service Bulletin release date (Basic Issue).

NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the aircraft configuration, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin. Standard SRPSA fees may apply. Refer to the Services section of the Bombardier customer portal for the latest prices, rates and fees.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 2 of 10

E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.

NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.

2. The technical content of this Service Bulletin is accepted by the EASA under the Canada/EU bilateral Aviation Safety Agreement.

F. Manpower NOTES: 1. The man−hours given are to help you schedule the tasks given in this Service Bulletin. The man−hours are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.

For more information related to the manpower, refer to SB 605−00−002.

2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3.C). The accumulated curing time is not included in the man−hours and should be considered for planning purposes before you schedule this Service Bulletin.

3. Labor hours are based on the fact that the modification will be done at the next scheduled maintenance task or inspection. Therefore no man−hours are allotted to prepare the aircraft for maintenance or to prepare for this Service Bulletin.

4 man−hours are necessary to do this modification.

The labor required to do this Service Bulletin is at no cost if:

− the work is done during new aircraft warranty period, and − the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and − this Service Bulletin is scheduled in less than 36 months from its release date (Basic Issue).

G. Material − Cost and Availability Kit 650K32−007 is necessary to do this modification. For material data, refer to Paragraph 3.C.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 3 of 10

KIT NO. PRICE 650K32−007 Please contact Bombardier Aviation Parts Services, in Montreal, for delivery lead times and confirmation of prices.

The parts listed in Paragraph 3.B. may be necessary to do this modification.

For all parts transactions, Bombardier Aviation’s current Spare Parts and Component Repair Price Catalogue General Terms and Conditions apply. These terms and conditions are found on the Bombardier Customer Portal at:

my.businessaircraft.bombardier.com The kit and/or parts are available at no cost if:

− ordered during new aircraft warranty period, and − a no−charge purchase order is sent to Bombardier Aviation in less than 36 months from this Service Bulletin release date (Basic Issue).

For those aircraft in new aircraft warranty at the time of Service Bulletin distribution, Smart Parts does not for the kit at any time.

For those aircraft out of new aircraft warranty at the time of Service Bulletin distribution, Smart Parts pays for the kit for up to 36 months from Service Bulletin distribution date (Basic Issue).

H. Tooling The equipment and tools listed below are necessary to do this modification:

GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Digital Voltmeter Commercially Available − Screwdriver Extension, Rigid 2 in(50.8 mm) Commercially Available − Screwdriver Bit, Cut to 1 7/8 in(47.6 mm) Commercially Available − Screwdriver Bit Holder Commercially Available − Screwdriver, Torque 5 to 6 lbf in (0.56to 0.68 Nm) NOTES: 1. Refer to the CL−605 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.

2. Refer to the Liability Statement in the ITEM for the CL−605, for acceptable GSE equivalents.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 4 of 10

3. This list is provided for quick reference. In case of discrepancy between this list and the tools called in the SPM, WM, Chapter 20, then the tools called in the SPM−WM prevail. Other approved alternative tools are acceptable and can also be used.

4. Do not use other tool in lieu of the screwdriver listed in table.

I. Weight and Balance No change.

J. Electrical Load Data No change.

K. References − TCCA Airworthiness Directive, (pending).

− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−4306, Rev. −−1.

− Bombardier Aviation, Kit Drawing, K600−90101, Rev. −−.

− CL−605 Time Limits/Maintenance Checks (TLMC), RS−CL605−XXX.

− Bombardier Aviation, Standard Practice Manual (SPM), Chapters 20 and 51.

− CL−605 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 32, 52 and 53.

− CL−605 Aircraft Illustrated Parts Catalog (AIPC), Chapters 27 and 32.

− CL−605 Aircraft Maintenance Manual (AMM), incorporating the intent of TR 32−17, TR 32−18 and TR 32−19.

− CL−605 Aircraft Illustrated Parts Catalog (AIPC), incorporating the intent of TR 27−7 and TR 32−10.

L. Other Publications Affected − CL−605 Aircraft Maintenance Manual (AMM) Revision 68, Chapter 32.

− CL−605 Aircraft Illustrated Parts Catalog (AIPC) Revision 68, Chapter 32.

M. Equivalent Service Bulletins − For the Challenger 600 aircraft, use the SB 600−0782.

− For the Challenger 601 aircraft, use the SB 601−1114.

− For the Challenger 604 aircraft, use the SB 604−32−033.

− For the Challenger 650 aircraft, use the SB 650−32−007.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 5 of 10

2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the CL−605 Aircraft Maintenance Manual unless otherwise specified.

2. All references made to zones, access panels and/or doors, are from the CL−605 Aircraft Maintenance Manual, Chapter 6.

A. Aircraft Setup

(1) Obey all the electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.

(2) Remove the flight−controls access panels (131AL/132AR). Refer to AMM 52−44−20−000−801.

(3) Remove the flight compartment floor−panel (221CLF). Refer to AMM 53−01−01−000−801.

B. Modification NOTES: 1. If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis and get an approved disposition to complete this Service Bulletin. Standard SRPSA fees may apply. Refer to the Services section of the Bombardier customer portal for the latest prices, rates and fees.

2. It may be required to remove the passenger system oxygen cylinder in accordance with applicable SMM procedures. This may provide better access to the rudder potentiometer universal coupling location.

(1) Get access to potentiometer universal coupling, Part No. T16−6 on rudder feel unit assembly.

(2) Visually inspect the coupling, Part No. T16−6, for damage and pay particular attention to any cracking of the threaded holes.

(3) If coupling is not replaced, do as follows:

NOTE: During Steps (a) and (b) do not move rudder pedals or rotate rudder potentiometer until the new setscrews are tightened per Step (b).

(a) Remove and discard the two upper setscrews connecting the coupling to the rudder pedal pivot per AMM 32−51−04−000−801 following the relevant steps in accordance with TR 32−17 or AMM incorporating the intent of TR 32−17.

(b) Install the new self−locking setscrews (11) per AMM 32−51−04−400−801 in accordance with TR 32−17 or AMM incorporating the intent of TR 32−17 Section G.(1)., Steps (a) to (e) and (g), (h), and G.(2) (Post SB 605−32−010) (using new self−locking setscrews, anaerobic retaining compound and specified torque).

(c) Rig the potentiometer per AMM 32−51−04−820−801 in accordance with TR 32−18 or AMM incorporating the intent of TR 32−18, Post SB 605−32−010.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 6 of 10

(4) If coupling is replaced, do as follows:

(a) Remove the potentiometer and coupling per AMM 32−51−04−000−801 in accordance with TR 32−17 or AMM incorporating the intent of TR 32−17, per the applicable procedure (Pre SB 605−32−010).

(b) Install the coupling and potentiometer per AMM 32−51−04−400−801 in accordance with TR 32−17 or AMM incorporating the intent of TR 32−17, following task instructions related to Post SB 605−32−010 (using new self−locking setscrews, anaerobic retaining compound and specified torque).

(c) Rig the potentiometer per AMM 32−51−04−820−801 in accordance with TR 32−18 or AMM incorporating the intent of TR 32−18, following task instructions related to Post SB 605−32−010.

(5) If required, replace the potentiometer per AMM 32−51−04−400−801 and rig the potentiometer per AMM 32−51−04−820−801, respectively in accordance with TR 32−17 and TR 32−18 or AMM incorporating the intent of TR 32−17 and TR 32−18, following task instructions related to Post SB 605−32−010.

C. Testing

(1) Do the operational test of the nosewheel steering system. Refer to AMM 32−51−00−710−801.

D. Close−out

(1) Remove all tools, equipment and unwanted materials from the aircraft.

NOTE: Make sure to remove the rigging pin that was installed in the rudder pedal system forward quadrant.

(2) If previously removed, re−install the passenger system oxygen bottle in accordance with the SMM requirements.

(3) Install the flight−controls access panels (131AL/132AR). Refer to AMM 52−44−20−400−801.

(4) Install the flight compartment floor−panel (221CLF). Refer to AMM 53−01−01−400−801.

E. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).

For information, correction(s), comment(s) and/or feedback regarding Service Bulletins released on the Customer Portal, please contact the Service Bulletin Group at the following email address:

bbad_SBgroup@aero.bombardier.com MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 7 of 10

3. MATERIAL INFORMATION A. Kit Kit 650K32−007 is necessary to do this Service Bulletin and contains the part that follows:

NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION B0201102−2−220 8 Self−lockingSetscrew MS18063−2 Discard NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit Parts List contained in the respective kit, then the later list prevails.

2. The actual quantity for some of the hardware contained in the kit can be greater than the amount shown in the table as these items are supplied in prepackaged quantities.

3. The self−locking setscrew can be identified by its yellow locking patch.

B. Part The parts that follow may be necessary to do this Service Bulletin and are available from Bombardier Aviation Parts Services, Montreal:

NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION 7149−3 or 8978−3 1 Potentiometer − − T16−6 1 UniversalCoupling − − NOTE: The part numbers for the items listed above are subject to change without revision to this Service Bulletin. In case of discrepancy between this list and any other list, the Illustrated Parts Catalog prevails and shall be used to determine the latest part number.

C. Material The materials that follow, or equivalent, are necessary to do this Service Bulletin.

These can be purchased from a local supplier. Bombardier Aviation does not pay for these consumables.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 8 of 10

DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY SUPPLIER(SEENOTE) Anaerobic Retaining Compound Loctite 243 − AsNecessary Code: A Lockwire MS20995C32 − AsNecessary Code: A NOTES: 1. Refer to the table that follows for each suppliers address listed by codes.

2. The Curing Time (CT), if applicable, for each consumable material is indicated with the description of each product.

3. At time of release of this Service Bulletin, the information on the supplier was valid and accurate. In the event that this information has changed, the operator is encouraged to use the World Wide Web to find a local supplier.

SUPPLIERS ADDRESSES BY CODES Code: A Commercially Available D. Publications No publications required.

MODEL CL−600−2B16 Basic Issue: Oct 30/2023 605−32−010 Page 9 of 10

SB650−32−007_001 FS209.70 7149−3 OR 8978−3 (POTENTIOMETER) 7149−3 OR 8978−3 (POTENTIOMETER) T16−6 (COUPLING) T16−6 (COUPLING) 601−86105−1 (ADAPTOR) 601−86105−1 (ADAPTOR) B0201102−2−220 (SETSCREW) (QTY 4) MODEL CL−600−2B16 Replacement of Universal Coupling (T16−6) Setscrews Figure 1 Basic Issue: Oct 30/2023 605−32−010 Page 10 of 10

605−32−010 Basic Oct 30/2023 MODIFICATION – NOSEWHEEL STEERING – REPLACEMENT OF POTENTIOMETER UNIVERSAL COUPLING (T16−6)

SETSCREWS bbad_SBgroup@aero.bombardier.com NOTE: Please use Salesforce only for troubleshooting issues or when Engineering deviation is necessary to accomplish the Service Bulletin modification.

SERVICE BULLETIN EVALUATION FORM (Your ideas will help us provide better bulletins) SERVICE BULLETIN: ISSUE: DATED:

TITLE:

For any information, correction(s), comment(s) and/or feedback regarding Service Bulletins released on the Customer Portal, please contact the Service Bulletin Group at the following email address: