Service bulletin · Bombardier

Revision 01U.S. DOT/FAA - Service Information - 2 · 19 pages · 118 KB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2012-0146; AD 2012-21-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2012-0146 (document 0007) · AD 2012-21-11

Manufacturer
Bombardier
Type
Service Bulletin
Number
605-35-001
Latest revision known
605-35-001, Revision 01, dated February 28, 2011

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 19

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2012-0146; AD 2012-21-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '51f8394a510827224bab47a18c09cd8baed413a93d807d4b8b1f5decbe68696e'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

605-35-001 Page 1 of 1

SERVICE BULLETIN

REVISION TRANSMITTAL SHEET MODEL CL-600-2B16 Discard the Basic Issue of this Service Bulletin dated Jan 31/2011 and replace in its entirety with this Revision 01.

Service Bulletin No. 605-35-001

Date of Basic Issue Jan 31/2011

Revision No. 01 Dated Feb 28/2011

This revision has no effect for aircraft on which the Basic Issue of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry.

You may make an entry as “Not Applicable” for this revision.

This revision is issued to:

1. Change the Summary Sheet and Paragraph 1.A. to show the revised effectivity.

2. Change, in Paragraph 1.K., the revision of Restriction and/or Special Instruction (RSI), C-4065, from Rev. A to Rev. B.

3. Make miscellaneous minor changes, as necessary, with no change of context.

Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 1 of 1 SERVICE BULLETIN SUMMARY This Service Bulletin is available at:

www.cic.bombardier.com MODEL CL-600-2B16 ATA 35-11 OXYGEN SPECIAL CHECK/MODIFICATION – OXYGEN SUPPLY SYSTEM – INSPECTION AND

REPLACEMENT OF OXYGEN CYLINDER AND REGULATOR ASSEMBLY (CRA)

AND REGULATOR ASSEMBLIES WITH SPECIFIC SERIAL NUMBERS The information below is provided for your reference. For full details, please see corresponding paragraph contained within this bulletin.

RECOMMENDED SPECIFIED TIME COMPLIANCE COMPLIANCE TIME Within 750 flight hours from the release of this Service Bulletin (Basic Issue) or before Dec 31, 2011, whichever comes first EFFECTIVITY: A/C Serial No. 5701 to 5802, 5804 to 5808, 5810 to 5816, 5819, 5822 to 5823 MANPOWER: Refer to Paragraph 1.F.

TLMC, CH 5, PART 4 REQUIREMENT YES NO KITS and/or PARTS YES NO

TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO

DEDICATED SCHEDULE YES NO PREREQUISITE SERVICE BULLETINS: N/A NOTE: It is recommended to do SB 605-24-005 “Modification - Oxygen Supply System – Installation of Protection on Electrical Wiring Harness”.

This Service Bulletin is expected to be the subject of an Airworthiness Directive which will make it necessary to implement this Service Bulletin To place an order for parts or kits, please call Bombardier Parts Logistics at:

514-855-2999 or 1-866-538-1247

Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

© 2011 Bombardier Inc. All rights reserved Challenger*, Global Express*, Global Express XRS*, Global 5000*, Learjet* are Trademarks of Bombardier Inc.

Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 1 of 13 SERVICE BULLETIN This Service Bulletin is available at:

www.cic.bombardier.com MODEL CL-600-2B16 ATA 35-11 OXYGEN SPECIAL CHECK/MODIFICATION – OXYGEN SUPPLY SYSTEM – INSPECTION AND

REPLACEMENT OF OXYGEN CYLINDER AND REGULATOR ASSEMBLY (CRA)

AND REGULATOR ASSEMBLIES WITH SPECIFIC SERIAL NUMBERS

1. PLANNING INFORMATION NOTES: 1. This Service Bulletin is also applicable for the Oxygen Cylinder and Regulator Assemblies (CRA) and regulator assemblies in the operator’s stock room with Part No. 806371-311 and 806371-340 and Part No. 806370-12.

2. A secondary Cylinder and Regulator Assembly (optional) may have been installed during production or by STC.

3. It is recommended to do SB 605-24-005 (if applicable) at the same time as this Service Bulletin.

A. Effectivity CL-600-2B16 aircraft, Serial No. 5701 to 5802, 5804 to 5808, 5810 to 5816, 5819, 5822 to 5823.

CRAs Part No. 806371-311 and 806371-340 held as spares.

CL-600-2B16 aircraft, Serial No 5803, 5809, 5817, 5818, 5820, 5821, 5824 and all other subsequent CL-600-2B16 aircraft have been modified or are scheduled for the modification in production (Ref.: RSI C-4065).

NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).

Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 2 of 13 B. Reason The “898 Series” oxygen Cylinder & Regulator Assemblies (CRA) could lead to oxygen leakage.

Deformations were found at the neck of the pressure regulator bodies on two different units while undergoing routine inspections. The deformation is attributed to two batches of raw material not meeting the required tensile strength. This may cause the material at the threaded vicinity of the pressure regulator neck to elongate resulting in oxygen leakage.

To date, AVOX Systems (the manufacturer) have found no instances of oxygen leakage related to this issue. This Service Bulletin replaces affected CRAs with upgraded CRAs eliminating any possibility of oxygen leakage.

NOTE: The baseline oxygen system on the Challenger 605 is equipped with one 115 ft³ CRA mounted inside the wardrobe enclosure and a second (optional) 40 ft³ CRA mounted under the flight deck. Both mentioned CRAs can be affected.

C. Description This Service Bulletin gives instructions to:

– Access the 115 ft³ CRA and regulator assemblies and verify the serial numbers, – Access the 40 ft³ CRA (if installed) and regulator assemblies and verify the serial numbers, – Replace the affected CRAs (if any) with replacement CRAs, and – Do the necessary leak test and operational test of the system.

D. Compliance Recommended within 750 flight hours from the release of this Service Bulletin (Basic Issue) or before December 31, 2011, whichever comes first.

NOTE: This Service Bulletin is in reference to Advisory Wire AW600-35-2361.

E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93-Q-02.

NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.

2. The technical content of this Service Bulletin is accepted by the JAA and by EASA in accordance with established procedures.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 3 of 13 F. Manpower NOTES: 1. The man-hours given are estimates to help you schedule the tasks given in this bulletin. The estimates are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.

For more information related to the manpower estimates, refer to SB 605-00-002.

2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the labor estimates and should be considered for planning purposes before you schedule this Service Bulletin.

1 man-hour is necessary to do the special check for both CRAs (if required).

1.5 man-hours are necessary to replace the 115 ft³ CRA and do the required tests.

1.5 man-hours are necessary to replace the 40 ft³ CRA (if required) and do the required tests.

The labor required to do this Service Bulletin is at no cost if:

(i) the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and

(ii) this Service Bulletin is scheduled within the stated compliance time.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 4 of 13 G. Material - Cost and Availability The parts listed in Paragraph 3.B., may be necessary to do this Special Check/ Modification. Refer to the table that follows for the applicable aircraft effectivity:

KIT/PART NO. ITEM AIRCRAFT EFFECTIVITY 806371-311 115 ft³ CRA (Baseline) 5701 to 5848 806371-340 40 ft³ CRA (Optional) 5701 to 5848 NOTE: Some aircraft are equipped with a second optional CRA, Part No.

806371-140 or -340. The -140 CRA is not affected by this Special Check/Modification.

Bombardier Aerospace pays for the parts to do this Special Check/Modification.

The oxygen cylinder and regulator assemblies (CRA) are available at no cost if a no-charge purchase order is sent to Bombardier Aerospace within the compliance time from this Service Bulletin release date (Basic Issue).

NOTE: Due to the lead-time for obtaining parts, operators are advised to do the special check first to determine if there are faulty CRA’s installed on the aircraft and if necessary, to order the parts in advance before scheduling the incorporation of this Service Bulletin. Please contact Parts Logistics, in Montreal, for delivery lead times.

This Service Bulletin is covered by a dedicated schedule. To ensure a timely and effective return/upgrade program, advance scheduling is required through our In-Service Implementation Team (ISIT). Please contact your Regional Manager (RM), Field Service Representative (FSR) or Customer Service Representative (CSR) as soon as is practical to schedule your aircraft.

Send the old oxygen cylinder and regulator assemblies (CRA), Part No. 806371-311 (115 ft³.) and/or 806371-340 (40 ft³), to the address shown below:

Learjet Core Returns 8219 West Irving, Bldg 9, Dock 9, Wichita, KS 67209 USA NOTE: Refer to Avox Systems Inc., Service Information Letter SIL-35-126 for shipment of CRA.

During or after the above free period, Smart Parts Plus does not pay for the parts.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 5 of 13 H. Tooling GSE REFERENCE NO. PART NO. DESCRIPTION 12í30í02 - Adaptor Oxygen System 24í00í24 - Tag, Circuit Breaker Commercially Available - Wrench, Torque 20 to 125 lbf in (2.26 to14.12 Nm) I. Weight and Balance No change.

J. Electrical Load Data No change.

K. References – Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C-4065, Rev. B.

– Bombardier Aerospace, Advisory Wire, AW600-35-2361.

– Avox Systems Inc., Service Bulletin 10009507-35-01 (attached).

– Avox Systems Inc., Service Information Letter SIL-35-126 (attached).

– Bombardier Aerospace, SB 605-24-005 “Modification - Oxygen Supply System – Installation of Protection on Electrical Wiring Harness”.

– CL-605 Aircraft Maintenance Manual (AMM), Chapters 6, 12 and 35.

– CL-605 Aircraft Illustrated Parts Catalog (AIPC), Chapter 35.

– CL-605 Supplemental Maintenance Manual (SMM), Chapter 35.

– CL-605 Standard Practice Manual (SPM), Chapter 20.

L. Other Publications Affected None M. Equivalent Service Bulletin None.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 6 of 13

2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the CL-605 Aircraft Maintenance Manual unless otherwise specified.

2. All references made to zones, access panels and/or doors, are from the CL-605 Aircraft Maintenance Manual, Chapter 6.

A. Aircraft Setup WARNING: OBEY ALL THE OXYGEN SAFETY PRECAUTIONS WHEN YOU

DO MAINTENANCE ON THE OXYGEN SYSTEM AND OXYGEN SYSTEM COMPONENTS. IF YOU DO NOT OBEY THE SAFETY PRECAUTIONS, YOU CAN CAUSE A FIRE OR AN EXPLOSION.

THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.

(1) Obey all the oxygen system safety precautions. Refer to TASK 35-00-00-910-801.

(2) Open and tag the circuit breaker that follows:

CB PANEL CB NO. NAME ZONE CBP 2 P9 PASS/CREW OXYGEN 222

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 7 of 13 B. Special Check/Modification - Oxygen Cylinder and Regulator Assembly 115 ft³ CRA

(1) Gain access to the oxygen cylinder through the wardrobe.

(2) Examine and record the part number and serial number of the CRA installed on the aircraft. Compare the recorded numbers with the numbers listed in Table 1 that follows to determine if there is a match.

AVOX Systems

CRA PNR AVOX Systems CRA Serial Number 806371-311 C08121069, C08121070, C08121071, C08121072, C09010076, C09010415, C09010416, C09010417, C09010418, C09010644, C09010645, C09010646, C09010647, C09020207, C09020208, C09020209, C09020210, C09020506, C09020507, C09020508, C09020509, C09030236, C09030237, C09030238, C09030239, C09030240, C09030241, C09030242, C09030243, C09050210, C09060314, C09060315, C09060316, C09060317, C09080321, C09080322, C09080323, C09080324, C09080325, C09080326, C09120024, C09120025, C09120026, C09120027 Table 1 NOTES: 1. There are two identification labels located on the cylinder. One label identifies the part number/serial number of the cylinder alone. The second label identifies the part number/serial number of the cylinder and pressure regulator as an assembly which is the one that contains the numbers concerned for this bulletin. For details on the appearance of the label, refer to Figure 1 of the attached Avox SB 10009507-35-01.

2. If the CRA serial number can’t be located, only inspect the regulator assembly for the Part No. 806370-12 and verify if the serial number is in the Table 2 that follows.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 8 of 13

(3) Examine and record the part number and serial number of the pressure regulator on the CRA installed on the aircraft. Compare the recorded numbers with the numbers listed in Table 2 that follows to determine if there is a match.

AVOX Systems Regulator PNR AVOX Systems Regulator Serial Number 806370-12 C08080226, C08080227, C08080228, C08080229, C08080230, C08080231, C08080232, C08080233, C08110561, C08110562, C08110563, C08110564, C08110565, C08110566, C08110567, C08110657, C08110658, C08110659, C08110660, C08110661, C08110662, C08110663, C08110664, C08110665, C08110666, C08110667, C08110668, C08110669, C08110670, C08110671, C09020320, C09020321, C09020322, C09020323, C09020324, C09020325, C09020326, C09020327, C09020328, C09020329, C09020330, C09020331, C09020332, C09020333, C09020334, C09020335, C09020336, C09020337, C09020338, C09020339, C09070031, C09080134, C09080135, C09080136, C09080137, C09080138, C09080139, C09080140, C09080141, C09080142, C09080143, C09090170, C09090171, C09090172, C09090173, C10010331, C10010332, C10030536 Table 2 NOTE: The identification label is located on the neck of the pressure regulator.

For details on the appearance of the label, refer to Figure 2 of the attached Avox SB 10009507-35-01.

(4) If the serial number of the installed CRA matches one of the numbers listed in Table 1, replace the CRA with a serviceable one. Refer to the removal TASK 35-11-01-000-801 and the installation TASK 35-11-01-400-801.

NOTE: The replacement CRA will have the suffix “-A” at the end of the serial number if it was reworked as a result of the attached Avox SB 10009507-35-01. However, you can have a replacement CRA without the suffix “-A” if it was not affected by the attached Avox SB 10009507-35-01.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 9 of 13

(5) If the serial number of the installed pressure regulator matches one of the numbers listed in Table 2, replace the CRA with a serviceable one.

Refer to the removal TASK 35-11-01-000-801 and the installation TASK 35-11-01-400-801.

NOTE: The replacement CRA will have the suffix “-A” at the end of the serial number if it was reworked as a result of the attached Avox SB 10009507-35-01. However, you can have a replacement CRA without the suffix “-A” if it was not affected by attached Avox SB 10009507-35-01.

(6) If the serial number of both the CRA and pressure regulator do not match the numbers listed in Tables 1 and 2, no further action is necessary. Proceed to the close-out procedure in Paragraph 2.E.

C. Special Check/ Modification – Optional Oxygen Cylinder and Regulator Assembly 40 ft³ CRA NOTE: The part number of the optional 40 ft³ CRA installed on your aircraft can either be 806371-140 or -340. The -140 CRA is not affected by this Service Bulletin.

(1) Remove the fasteners that attach the right kidney panel at FS 235.00.

(2) Examine and record the part number and serial number of the CRA installed on the aircraft. Compare the recorded numbers with the numbers listed in Table 3 that follows to determine if there is a match.

AVOX Systems

CRA PNR AVOX Systems CRA Serial Number 806371-340 C08120962, C09010419, C09010420, C09020346, C09020347, C09050183, C09050184, C09050185, C09050186, C09050187, C09060086, C09060087, C09080583, C09080584, C09090676, C09090677, C09090678, C09090679, C09090707, C09090708, C09110135, C09110136, C10010427, C10010428 Table 3 NOTE: 1. There are two identification labels located on the cylinder. One label identifies the part number/serial number of the cylinder alone. The second label identifies the part number/serial number of the cylinder and pressure regulator as an assembly which is the one that contains the numbers concerned for this bulletin. For details on the appearance of the label, refer to Figure 1 of the attached Avox SB 10009507-35-01.

2. If the CRA serial number can’t be located, only inspect the regulator assembly for the Part No. 806370-12 and verify if the serial number is in the Table 4 that follows.

MODEL CL-600-2B16 Basic Issue: Jan 31/2011 605-35-001 Revision 01: Feb 28/2011 Page 10 of 13

(3) Examine and record the part number and serial number of the pressure regulator on the CRA installed on the aircraft. Compare the recorded numbers with the numbers listed in Table 4 that follows to determine if there is a match.

AVOX Systems Regulator PNR AVOX Systems Regulator Serial Number 806370-12 C08080226, C08080227, C08080228, C08080229, C08080230, C08080231, C08080232, C08080233, C08110561, C08110562, C08110563, C08110564, C08110565, C08110566, C08110567, C08110657, C08110658, C08110659, C08110660, C08110661, C08110662, C08110663, C08110664, C08110665, C08110666, C08110667, C08110668, C08110669, C08110670, C08110671, C09020320, C09020321, C09020322, C09020323, C09020324, C09020325, C09020326, C09020327, C09020328, C09020329, C09020330, C09020331, C09020332, C09020333, C09020334, C09020335, C09020336, C09020337, C09020338, C09020339, C09070031, C09080134, C09080135, C09080136, C09080137, C09080138, C09080139, C09080140, C09080141, C09080142, C09080143, C09090170, C09090171, C09090172, C09090173, C10010331, C10010332, C10030536 Table 4 NOTE: The identification label is located on the neck of the pressure regulator.

For details on the appearance of the label, refer to Figure 2 of the attached Avox SB 10009507-35-01.

(4) If the serial number of the installed CRA matches one of the numbers listed in Table 3, replace the CRA with a serviceable one. For the removal and installation procedures, refer to the Supplemental Maintenance Manual (SMM), Chapter 35.

NOTE: The replacement CRA will have the suffix “-A” at the end of the serial number if it was reworked as a result of the attached Avox SB 10009507-35-01.

However, you can have a replacement CRA without the suffix “-A” if it was not affected by the attached Avox SB 10009507-35-01.

(5) If the serial number of the installed pressure regulator matches one of the numbers listed in Table 4 of the attached Avox SB 10009507-35-01, replace the CRA with a serviceable one. For the removal and installation procedures, refer to the Supplemental Maintenance Manual (SMM), Chapter 35.

NOTE: The replacement CRA will have the suffix “-A” at the end of the serial number if it was reworked as a result of the attached Avox SB 10009507-35-01.

However, you can have a replacement CRA without the suffix “-A” if it was not affected by attached Avox SB 10009507-35-01.

(6) If the serial number of both the CRA and pressure regulator do not match the numbers listed in Tables 3 and 4, no further action is necessary. Proceed to the close-out procedure in Paragraph 2.E.