On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 16
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0511; AD 2017-19-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9983e7e3087fe2e6104ef2cf110a86835f2a54d99d39329c724333cf6305439e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9983e7e3087fe2e6104ef2cf110a86835f2a54d99d39329c724333cf6305439e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Feb 02/2015 605-57-003Page 1 of 2
SERVICE BULLETIN INFORMATION SHEET MODEL CL-600-2B16 ATA 57-40 WINGS SPECIAL CHECK/REWORK – ATTACHMENT FITTINGS – SERIALIZATION OF MAIN LANDING GEAR (MLG) SIDE-BRACE FITTING-SHAFT PART NO. 601R10237-1/ -3 Service Bulletin No.: 605-57-003 Issue: Basic Dated: Sep 09/2014 The following data is supplied for information only. No revision to the Service Bulletin is necessary.
Keep this Information Sheet with subject Service Bulletin.
This Information Sheet is issued to:
1. Clarify that the MLG side-brace fitting-shaft does not need to be removed if the engraved Serial Number is visible. A note under Paragraph 2.A. (5) is added as follows:
(5) Remove the MLG side-brace fitting-shaft. Refer to TASK 32-32-02-000-801.
NOTE: The MLG side-brace fitting-shaft does not need to be removed if the engraved Serial Number is visible.
2. Inform operators that 2 kits, Part No 605K57-003 are to be ordered if the serialization is required on both shafts, 1 kit per shaft to be removed.
Paragraphs 1.G. and 3.A. are revised as follows:
1. PLANNING INFORMATION G. Material - Cost and Availability Kit 605K57-003 is necessary to do this special check/rework.
KIT NO. QTY PRICE 605K57-003 see NOTE Please contact Bombardier Aerospace Parts Services, in Montreal, for delivery lead times and confirmation of prices.
NOTE: 1 kit per shaft is required. If the serialization is required on both shafts, 2 kits, Part No 605K57-003 are to be ordered.
MODEL CL-600-2B16 Feb 02/2015 605-57-003Page 2 of 2
3. MATERIAL INFORMATION A. Kit Kit 605K57-003 is necessary to do this Service Bulletin and contains the parts that follow:
NEW PART NO.
QTY ITEM USED PART NO.
INSTRUCTIONS -
DISPOSITION B0202013S6556-80 1 Washer - - B0203053-16 1 Nut - - MS24665-377 1 Cotter Pin - - NOTES: 1. In case of discrepancy between this list and the “Service Bulletin Kit Parts List” contained in the respective kit, then the latter list prevails.
2. 1 kit per shaft is required. If the serialization is required on both shafts, 2 kits, Part No 605K57-003 are to be ordered.
Basic Issue: Sep 09/2014 605-57-003 Page 1 of 1
SERVICE BULLETIN SUMMARY This Service Bulletin is available at:
www.cic.bombardier.com MODEL CL-600-2B16 ATA 57-24 WINGS SPECIAL CHECK/REWORK – ATTACHMENT FITTINGS – SERIALIZATION OF MAIN LANDING GEAR (MLG) SIDE-BRACE FITTING-SHAFT PART NO. 601R10237-1/ -3 The information below is provided for your reference. For full details, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME Within 48 months from this Service Bulletin release date (Basic Issue) EFFECTIVITY: A/C Serial No. 5701 to 5851 MANPOWER: 1 man-hour
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN
YES NO TLMC, CH 5 AFFECTED YES NO KITS and/or PARTS YES NO
TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO PREREQUISITE SERVICE BULLETINS: N/A To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514-855-2999 or 1-866-538-1247
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
© 2014 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Sep 09/2014 605-57-003 Page 1 of 10
SERVICE BULLETIN This Service Bulletin is available at:
www.cic.bombardier.com MODEL CL-600-2B16 ATA 57-24 WINGS SPECIAL CHECK/REWORK – ATTACHMENT FITTINGS – SERIALIZATION OF MAIN LANDING GEAR (MLG) SIDE-BRACE FITTING-SHAFT PART NO. 601R10237-1/ -3
1. PLANNING INFORMATION A. Effectivity CL-600-2B16 aircraft, Serial No. 5701 to 5851.
The intent of this Service Bulletin was met on the aircraft that follow with the Service Requests for Product Support Action (SRPSA) listed in the table that follows:
AIRCRAFT SERIAL NO. SRPSA NO.
5701 39470 5724 31732 5783 42824 5784 42824 5830 18907 5838 94863 5843 47577
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 2 of 10 All other subsequent CL-600-2B16 aircraft are scheduled for the modification in production (Ref.: Modification Summary 600-6027).
NOTE: The instructions given in this Serv ice Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.
B. Reason A life limitation was added on the main landing gear (MLG) side-brace fitting-shaft Part No. 601R10237-1/ -3. Traceability is required in order to keep track of the structural life limit. The component must be identified, to comply with Authority Regulations – “Life-limited Component Identification”. Replacement of the shaft Part No. 601R10237-1/ -3 is mandatory at the life limit of 60,000 landings. The Time Limits/Maintenance Checks (TL/MC) manual is updated to add this component and its life limit.
C. Description This Service Bulletin gives instructions to:
– Inspect the shaft, – Do the serialization of the shaft, – Identify how many landing cycles are on the shaft, and – Do the operational test of the extens ion and retraction system if necessary.
D. Compliance Recommended in less than 48 months from this Service Bulletin release date (Basic Issue).
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93-Q-02.
NOTES: 1. The technical content of this Se rvice Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Se rvice Bulletin is accepted by EASA in accordance with established procedures.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 3 of 10 F. Manpower NOTES: 1. The man-hours given are estima tes to help you schedule the tasks given in this bulletin. The estimates are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower estimates, refer to SB 605-00-002.
2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the labor estimates and should be considered for planning purposes before you schedule this Service Bulletin.
3. Labor hours are based on the fact t hat the modification will be done at the next 48 months scheduled maintenance task or inspection.
Therefore no man-hours are allotted to prepare the aircraft for maintenance or to prepare for this Service Bulletin.
1 man-hour is necessary to do this special check/rework.
The labor required to do this Service Bulletin is at no cost for aircraft in warranty period at the time of release of this Service Bulletin (Basic Issue) if:
(i) the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and
(ii) this Service Bulletin is schedul ed in less than 48 months from its release date (Basic Issue).
G. Material - Cost and Availability Kit 605K57-003 is necessary to do this special check/rework.
KIT NO. PRICE 605K57-003 Please contact Bombardier Aerospace Parts Services, in Montreal, for delivery lead times and confirmation of prices.
Sufficient kits will be kept for the estimated amount of orders.
Bombardier Aerospace does not pay for the kit to do this special check/rework.
The Smart Parts Program pays for this kit if you place an order in less than 48 months from this Service Bulletin release date. After this time limit, the Smart Parts Program will not pay for the kit.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 4 of 10 H. Tooling The equipment and tools listed below are necessary to do this special check/rework:
GSE REFERENCE NO. PART NO. DESCRIPTION 24−00−24 S4933959 −501 Circuit Breaker Tag 32−30−04 G600 −323001−1 Kit – MLG side Stay Pin Extraction (see note) Commercially Available - Vibro-Engraver Commercially Available - Wrench − Torque, 67 to 83 lbf ft (90.8 to 112.53 Nm) NOTE: If the shaft cannot be removed ea sily, use the MLG side stay pin extraction tool.
I. Weight and Balance No change.
J. Electrical Load Data No change.
K. References – Bombardier Aerospace, Modification Summary, 600-6344, Rev. C.
– Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C-4096, Rev. A.
– Bombardier Aerospace, Kit Drawing, K604-10012, Rev. --.
– Bombardier Aerospace, Standard Pr actices Manual (SPM), Chapters 20 and 51.
– Bombardier Aerospace, Structural Repair Manual (SRM), Chapter 51.
– CL-605 Aircraft Maintenance Manual (AMM), Chapters 24, 29, 32 and 53.
– CL-605 Illustrated Tool and Equipment Manual (ITEM), Chapters 24 and 32.
L. Other Publications Affected CL-605 Time Limits/Maintenance Checks (TL/MC) Manual, Revision 10, Part 2, Chapter 5-10-10, Task No. 57-24-00-101.
M. Equivalent Service Bulletins – For the Challenger 600 aircraft, use SB 600-0768.
– For the Challenger 601 aircraft, use SB 601-0636.
– For the Challenger 604 aircraft, use SB 604-57-005.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 5 of 10
2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the CL-605 Aircraft Maintenance Manual unless otherwise specified.
2. All references made to zones, a ccess panels and/or doors, are from the CL-605 Aircraft Maintenance Manual, Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to TASK 24-00-00-910-801.
(2) Obey all the hydraulic safety precautions. Refer to TASK 29-00-00-910-801.
(3) Obey all the hydraulic technical precautions. Refer to TASK 29-00-00-910-802.
(4) Remove the main landing gear (MLG) wheel bin (163AZ/164AZ). Refer to TASK 53-65-01-000-801.
(5) Remove the MLG side-brace fitting-sha ft. Refer to TASK 32-32-02-000-801.
B. Shaft Inspection and Serialization
(1) Do the inspection of the shaft.
(a) If no serial number is f ound, proceed to step 2.B.(2).
(b) If an ink stamped is found, but it is no longer visible, proceed to step
2.B.(2).
(c) If an ink stamped serial number is f ound visible, engrave the same serial number. Proceed to step 2.B.(3).
(d) If an engraved serial number is found, proceed to Paragraph 2.D., Close-out.
(2) Determine the new serial number as follows:
X - YYYY - Z “1” for LR shaft “2” for RH shaft dash aircraft serial number dash a letter in alphabetical order, starting with “A” NOTE: If for any reason the part is removed and replaced by a new one still not serialized, use the next available letter (to prevent use of same serial number on different part).
Example: for LH shaft part num ber 601R10237-1 on aircraft, Serial No. 5838, first time will have a serial number of 1-5838-A.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 6 of 10
(3) In accordance with best shop practice s, apply the serial number on the shaft as shown on Figure 1.
NOTES: 1. For vibro-engraving pr ocedure, refer to SPM TASK 20-90-00-930-801.
2. An alternative ink marking method is permissible.
Figure 1
(4) Use the permanent ink marking as an al ternative method for marking. Apply this method when engraving marking could not be done prior to part finish.
(a) Clean the surface of the shaft to be marked with dry cleaning solvent per SPM TASK 51-25-00-110-801.
(b) The ink marking may be applied by means of marking pen, inkjet equipment, rubber stamp or opaque ink pads using ink that are qualified per SPM TASK 51-31-00-992-805 or equivalent. Use proper colored ink which provides sufficient contrast with the surface of the part.
(c) Apply one coat of clear fluid re sistant polyurethane as per SRM Chapter 51-01-06-00.
C. Testing
(1) Install the MLG side-brace fitting-s haft. Refer to TASK 32-32-02-400-801.
(2) Install the main landing gear (MLG) wheel bin (163AZ/164AZ). Refer to TASK 53-65-01-400-801.
(3) Do the functional test of the l anding gear extension and retraction system.
Refer to TASK 32-30-00-720-801.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 7 of 10 D. Close-out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Record on log book the accumulated lif e of the shaft. Refer to the steps that follow to determine the number of cycles:
(a) If the shaft has never been replaced on the aircraft, the considered number of cycles is the same as the aircraft.
(b) If the shaft has ever been replaced on the aircraft, the considered number of cycles is the same as the fleet leader.
E. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are requesting your feedback. Please take a moment to fill out our easy on-line Service Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION A. Kit Kit 605K57-003 is necessary to do this Service Bulletin and contains the parts that follow:
NEW PART NO.
QTY ITEM USED PART NO.
INSTRUCTIONS -
DISPOSITION B0202013S6556-80 1 Washer - - B0203053-16 1 Nut - - MS24665-377 1 Cotter Pin - - B. Parts No parts required.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 8 of 10 C. Material The materials that follow are necessary to do this Service Bulletin. These can be purchased from a local supplier. Bombardier Aerospace does not pay for these consumables.
DESCRIPTION PART No./NAME
SPECIFICATION QUANTITY SUPPLIER (See Note) V421−D or Videojet Ink 16−8700 As Necessary Code: A 73X−NW As Necessary Code: B Black Ink 5160 BAMS 516−007 Type I As Necessary Code: C Dry cleaning solvent Diestone HFP BAMS 180-009 As Necessary Code: D Polyurethane Topcoat (clear) Aerodur HS 77302 BAMS 565-002 As Necessary Code: E NOTES: 1. Refer to the table that follows for each supplier’s address listed by codes.
2. The Curing Time (CT), if applicab le, for each consumable material is indicated with the description of each product.
3. At time of release of this Se rvice Bulletin, the information on the supplier was valid and accurate. In the event that this information has changed, the operator is encouraged to use the World Wide Web to find a local supplier.
MODEL CL-600-2B16 Basic Issue: Sep 09/2014 605-57-003 Page 9 of 10
SUPPLIERS ADDRESSES BY CODES Code: A Videojet Technologies 1500 Mittel Boulevard Wood Dale, IL 60191 U.S.A.
Tel.: 800-843-3610 Fax: 800-582-1343 www.videojet.com
Code: B Independent Ink 13700 S. Gramercy Place Gardena CA 90249 U.S.A.
Tel: (310) 523 4657 Fax: (310) 329 5366 www.independentink.com
Code: C Marken-Imaje 5448 Timberlea Blvd. Mississauga, Ontario L4W 2T7 Canada Tel: 8 002 675 108 Fax: 8 669 219 732 www.markem-imaje.ca/
Code: D MagChem Inc.
1271, Ampère suite 101 Boucherville QC, J4B 5Z5 Canada Tel.: (1) 450 641 8500 Fax : (1) 450 655 1717 http://www.magchem.com
Code: E AkzoNobel Aerospace Coatings 1 East Water Street Waukegan, IL 60085 U.S.A.
Tel.: (847) 623 4200, Fax: (847) 625 3200 www.akzonobel.com/aerospace
D. Publications The publications that follow are required after this Service Bulletin has been incorporated.
– CL-605 Time Limits/Maintenance C hecks (TL/MC) Manual, Revision 10, Part 2, Chapter 5-10-10, Task No. 57-24-00-101.