On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 15
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0550; AD 2018-20-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '4b40de745e1f7f475608bb2d036d13294d1a71eeca786b9c6d857d247098274d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '4b40de745e1f7f475608bb2d036d13294d1a71eeca786b9c6d857d247098274d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Discard Revision 02 of this Service Bulletin dated Mar 11/2016 and replace in its entirety with this Revision 03.
Service Bulletin No. 650−33−001 Date of Basic Issue Oct 01/2015 Revision No. 01 Dated Nov 30/2015 Revision No. 02 Dated Mar 11/2016 Revision No. 03 Dated Oct 02/2017 This revision has no effect for aircraft on which the Basic Issue, Revision 01 or Revision 02 of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry. You may make an entry as "Not Applicable" for this revision.
This revision is issued to advise the operators that changes to Paragraph 2.B., Accomplishment Instructions, have been made. The changes are as follows:
1. Change Paragraph 1.E. to update the Approval Statement.
2. Change Paragraphs 2.A., 2.B, and 2.D., to add new notes for alternative instructions.
3. Change Paragraphs 2.B.(3), and 2.B.(6) to update the Accomplishment Instructions.
4. Make miscellaneous minor changes, as necessary, with no change of context
SERVICE BULLETIN MODEL CL−600−2B16 650−33−001 Page 1 of 1
REVISION TRANSMITTAL SHEET
MODIFICATION - FLOODLIGHTING PANEL - COCKPIT FLOODLIGHT GASKET
INSTALLATION TO PREVENT WATER INGRESS The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME Within 48 months from this Service Bulletin release date (Basic Issue) EFFECTIVITY: A/C Serial No. 6050 to 6070 MANPOWER: 2 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION NOYES
DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL CL−600−2B16 ATA 33−11 LIGHTS Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 1 of 1 This Service Bulletin is available at:
MODIFICATION - FLOODLIGHTING PANEL - COCKPIT FLOODLIGHT GASKET
INSTALLATION TO PREVENT WATER INGRESS
1. PLANNING INFORMATION A. Effectivity CL−600−2B16 aircraft, Serial No. 6050 to 6070.
All other subsequent CL−600−2B16 aircraft are scheduled for the modification in production (Ref.: Modification Summary 600−6520, Rev. B).
NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.
B. Reason Several cases have been reported where one cockpit floodlight was found burned and the corresponding circuit breaker tripped.
After investigation, it was found that the water ingress into the floodlight fixture caused the short circuit of one or more floodlight lamps. This led to an overheating condition of floodlight fixtures and to burning of the lamp assembly and wiring.
This Service Bulletin gives instructions to install a new gasket seal to floodlight fixtures in order to stop water ingress into the floodlight fixtures and thus to prevent the short−circuit of the floodlight bulbs and/or cable overheat damage.
SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL CL−600−2B16 ATA 33−11 LIGHTS Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
2015−2017 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 1 of 11 This Service Bulletin is available at:
C. Description This Service Bulletin gives instructions to:
− Get access to the floodlight fixtures DS3LA (pilot console) and DS7LA (copilot console) in the cockpit, − Remove the floodlight fixtures DS3LA and DS7LA from the support panel, − Remove existing heat−shrinkable tubing from fixtures and install 6 inches of new tubing, − Install the gasket to the holder assy, − Install the floolight fixtures DS3LA and DS7LA, and − Do the necessary tests to make sure that the system operates correctly.
D. Compliance Recommended within 48 months from this Service Bulletin release date (Basic Issue).
The access and time required to perform this modification are minimal, and we therefore recommend you perform it at the earliest opportunity.
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA under the Canada/EU bilateral Aviation Safety Agreement.
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 2 of 11
F. Manpower NOTES: 1. The man−hours given are estimates to help you schedule the tasks given in this bulletin. The estimates are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower estimates, refer to SB 650−00−002.
2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3). The accumulated curing time is not included in the labor estimates and should be considered for planning purposes before you schedule this Service Bulletin.
2 man−hours are necessary to do this modification.
The labor required to do this Service Bulletin is at no cost for aircraft that were in new aircraft warranty at the time of release of this Service Bulletin (Basic Issue) if:
1. the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and
2. this Service Bulletin is scheduled in less than 48 months from its release date (Basic Issue).
G. Material − Cost and Availability The Kit 605K33−005 in Paragraph 3.A and the parts in Paragraph 3.B. are necessary to do this modification.
KIT NO. PRICE 605K33−005 Please contact Bombardier Aerospace Parts Services, in Montreal, for delivery lead times and confirmation of prices.
This kit and parts are available at no cost for aircraft that were in new aircraft warranty at the time of release of this Service Bulletin (Basic Issue) if:
− a no−charge purchase order is sent to Bombardier Aerospace in less than 48 months, from this Service Bulletin release date (Basic Issue).
For those aircraft in new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus does not pay for the kit and parts at any time.
For those aircraft out of new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus pays for the kit and parts for up to 12 months from the Service Bulletin distribution date (Basic Issue).
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 3 of 11
H. Tooling The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION − AMP90300−2 (orequivalent) Crimping Tool NOTES: 1. Refer to the CL−650 Illustrated Tool and Equipment Manual to make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM for acceptable GSE equivalents.
3. This list is provided for a quick reference. In case of discrepancy between this list and the tool called out in the SPM−WM, Chapter 20, then the tool called in the SPM−WM will prevail. Other approved alternative tools are acceptable and can also be used.
I. Weight and Balance No change.
J. Electrical Load Data No change.
K. References − Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C−4142, Rev. −−.
− Bombardier Aerospace, Modification Summary 600−6537, Rev. C.
− Bombardier Aerospace, Kit Drawing K604−51046, Rev. B.
− CL−650 Aircraft Maintenance Manual (AMM), Chapters 6, 24 and 33.
− CL−650 Standard Practices Manual (SPM), Chapter 20.
L. Other Publications Affected − None.
M. Equivalent Service Bulletins − For the Challenger 604 aircraft, use SB 604−33−007.
− For the Challenger 605 aircraft, use SB 605−33−005.
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 4 of 11
2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the CL−650 Aircraft Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the CL−650 AMM, Chapter 6.
A. Aircraft Setup NOTE: The steps in the Aircraft Set−Up section of this Service Bulletin are recommended steps. The steps give a recommendation to get access to the work area. This recommendation is to give a safe work area and to minimize possible damage to surrounding aircraft parts. Alternative steps can be used at the operator’s discretion.
WARNING: OBEY ALL THE SAFETY PRECAUTIONS WHEN YOU DO
MAINTENANCE ON OR NEAR ELECTRICAL/ELECTRONIC EQUIPMENT. IF YOU DO NOT OBEY THE SAFETY
PRECAUTIONS, YOU CAN CAUSE INJURY TO PERSONS AND DAMAGE TO THE EQUIPMENT.
(1) Obey all electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.
(2) Open and tag the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE CBP−4 A13 LIGHTS FLOOD FS230R
(3) Remove/loosen the interior necessary to get access to the floodlight connectors and fixtures DS3LA on pilot side and DS7LA on copilot side (windshield side post cover, horizontal side ledge cover and side glare shield undercover panel − LHS and RHS). Refer to SMM, Chapter 25.
B. Modification NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.
(1) Remove the floodlight fixtures DS3LA on pilot side and DS7LA on copilot side.
Refer to kit drawing K604−51046. Do the steps that follow for both floodlight fixtures DS3LA and DS7LA:
(2) Remove and keep washer NAS1149DN816J or AN960JD9L, (qty. 2), floodlight assy 2LA006913, (qty. 1), and holder assy 601R59058−1, (qty. 1).
(3) Remove contact socket from the connector 1−480698−0. Cut the contact socket from wire (remove minimal wire lenght). Remove and discard screw MS35206−243, (qty. 2) and plastic connector 1−480698−0, (qty. 1).
NOTE: It is acceptable to remove the pins from the connector if they are not per Note 9 of Kit Drawing K604−51046.
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 5 of 11
(4) Remove and keep the white fiberglass protective tubing from fixtures wiring −leads. Refer to SPM, Chapter 20−14−00 and to to Kit Drawing K604−51046.
(5) Trim gasket K604−51046−3 to fit and follow holder assy 601R59058−1 contour outlines. Refer to IPC, Chapter 33.
(6) Cut a piece of shrinkable tubing six inches long and install it over the wiring as follows:
(a) If there is no shrinkable tubing installed over the wiring, install six inches of shrinkable tubing Part No. M23053/5−104−9, covering the wires on the light assembly side, or
(b) If there is tubing installed over the wiring, add as necessary (maximum 6 inches long total length) shrinkable tubing Part No. M23053/5−105−9 to overlap minimum one inch long the existing tubing, after you perform the step 2.B.(7).
(7) Install gasket K604−51046−3 onto rear face of holder assy 601R59058−1. Pull floodlight cable through pass−through hole and make sure that existing heat−shrinkable tube extends on both sides of the gasket.
(8) Re−install the white fiberglass protective tubing.
NOTE: Make sure that the white fiberglass protective tubing overlaps the new installed shrinkable tubing. Trim the tubing if necessary.
(9) Install the new contact socket, Part No. 350689−7 to wires with crimping tool AMP90300−2 (or equivalent). Refer to SPM, Chapter 20.
(10) Install the crimped contact socket into the connector 1−480698−0.
(11) Brush lightly with alcohol the floodlight assembly to remove any presence of dirt, lint or corrosion. Refer to SPM, Chapter 20.
(12) Use the new screws MS35206−331 and install the floodlight fixtures DS3LA on pilot side, and DS7LA on copilot side. Refer to AMM 33−11−01−400−801.
C. Testing
(1) Remove the tags and close the circuit breakers that follow:
CB PANEL CB NO. NAME ZONE CBP−4 A13 LIGHTS FLOOD FS230R
(2) Do the operational test of the floodlight system. Refer to AMM 33−11−00−710−801.
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 6 of 11
D. Close−out NOTE: The steps in the Close−Out section of this Service Bulletin, except for the return−to−service tests, are recommended steps. The steps give a recommendation to install components removed during the Aircraft Set−up. This recommendation is to make sure that the aircraft is safe and ready to return to service. Alternative steps can be used at the operator’s discretion.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
E. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are requesting your feedback. Please take a moment to fill out our easy on−line Service Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION A. Kits Kit 605K33−005 is necessary to do this Service Bulletin and contains the parts that follow:
NEW PART NO. QTY ITEM USEDPART NO. INSTRUCTIONS- DISPOSITION 350689−7 4 Contact,Socket − − K604−51046−3 2 Gasket Seal − − M23053/5−109−9 2 Heat Shrinkable Sleeving − − MS35206−331 4 Screw − − NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit Parts List contained in the respective kit, then the later list prevails.
2. The actual quantity for some of the hardware contained in the kit can be greater than the amount shown in the table as these items are supplied in prepackaged quantities.
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 7 of 11
B. Parts The parts that follow are necessary to do this Service Bulletin and are available from Bombardier Aerospace Parts Services, Montreal:
NEW PART NO. QTY ITEM USED PARTNO. INSTRUCTIONS- DISPOSITION 1−480698−0 2 Plastic Plug,Panel Mount − − M23053/ 5−104−9 2 Heat Shrinkable Sleeving − − NOTE: The part numbers for the items listed above are subject to change without revision to this Service Bulletin. In case of discrepancy between this list and any other list, the Illustrated Parts Catalog prevails and shall be used to determine the latest part number.
C. Material No materials required.
D. Publications No publications required.
MODEL CL−600−2B16 Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 8 of 11
K604−51046 B−S −S1−PL MODEL CL−600−2B16 PL K604−51046 − Kit − Cockpit Floodlight Gasket Installation to Prevent Water Ingress (Sheet 1 of 2, Rev. B) Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 9 of 11
K604−51046 B−S −S2−PL MODEL CL−600−2B16 PL K604−51046 − Kit − Cockpit Floodlight Gasket Installation to Prevent Water Ingress (Sheet 2 of 2, Rev. B) Basic Issue: Oct 01/2015 Revision 03: Oct 02/2017 650−33−001 Page 10 of 11