Service bulletin · Bombardier

Revision 02700-32-6506 Rev02 · 9 pages · 35 KB

© Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2024-0228; AD 2024-23-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-0228 (document 0009) · AD 2024-23-02

Manufacturer
Bombardier
Type
Service Bulletin
Number
700-32-6506
Latest revision known
700-32-6506, Revision 02, dated March 2, 2023

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 9

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2024-0228; AD 2024-23-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'acc7c6ab59f39ab5f0f1ec04a493b2006fa357db43a57a9d9d3fa37b406f330a'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Discard the Revision 01 of this Service Bulletin dated Mar 08/2022 and replace in its entirety with this Revision 02.

Service Bulletin No. 700−32−6506 Date of Basic Issue Oct 27/2021 Revision No. 01 Dated Mar 08/2022 Revision No. 02 Dated Mar 02/2023 This revision has no effect for aircraft on which the Basic Issue or Revision 01 of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry. You may make an entry as "Not Applicable" for this revision.

This revision is issued to:

1. Change, in the Service Bulletin Summary Sheet, the TLMC, CH 5 affected to YES.

2. Change, in Paragraph 1., to add Note 2.

3. Change, in Paragraph 1.K., to update TCCA Airworthiness Directive reference and add TLMC reference.

4. Change, in Paragraph 2.A., to revise step (2) and (3).

5. Make miscellaneous minor changes, as necessary, with no change of context.

SERVICE BULLETIN MODEL BD−700−1A10 (BD−700) 700−32−6506 Page 1 of 1

REVISION TRANSMITTAL SHEET

SPECIAL CHECK – BRAKE CONTROL SYSTEM – DETERMINATION OF HYDRAULIC SYSTEM NO. 2 AND NO. 3 BRAKE ACCUMULATOR CYCLES (PART NO. GW415-1250 AND GW415-1200) The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.

RECOMMENDED

RELIABILITY/DISPATCHABILITY/COST AVOIDANCE

COMPLIANCE TIME Not applicable EFFECTIVITY: A/C Serial No. 9861, 9872, and 60001 to 61999 MANPOWER: Refer to Paragraph 1.F.

CONTINUED AIRWORTHINESS (CAW)

FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED YES NO KITS and/or PARTS NOYES

TOOLING/GSE NOYES

PLANNING INFORMATION NOYES

DEDICATED SCHEDULE NOYES PREREQUISITE SERVICE BULLETINS: N/A NOTE: This Service Bulletin may be subject to an Airworthiness Directive which will make it necessary to implement this Service Bulletin.

SERVICE BULLETIN SUMMARY my.businessaircraft.bombardier.com MODEL BD−700−1A10 (BD−700) ATA 32−43

LANDING GEAR Basic Issue: Oct 27/2021 Revision 02: Mar 02/2023 700−32−6506 Page 1 of 1 This Service Bulletin is available at:

SPECIAL CHECK – BRAKE CONTROL SYSTEM – DETERMINATION OF HYDRAULIC SYSTEM NO. 2 AND NO. 3 BRAKE ACCUMULATOR CYCLES (PART NO. GW415-1250 AND GW415-1200)

1. PLANNING INFORMATION NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or equivalent action changes to make sure that this Service Bulletin can be completed.

2. BD−700−1A10 aircraft Serial No. 60047 and subsequent have complied with the component tracking requirements of this Service Bulletin, through the documented Aircraft Life Limited Parts Serialization list provided at aircraft entry into service.

A. Effectivity BD−700−1A10 aircraft, Serial No. 9861, 9872, and 60001 to 61999.

NOTE: The instructions in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aviation Service Bulletin(s).

SERVICE BULLETIN my.businessaircraft.bombardier.com MODEL BD−700−1A10 (BD−700) ATA 32−43

LANDING GEAR Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.

This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.

 2021−2023 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.

Basic Issue: Oct 27/2021 Revision 02: Mar 02/2023 700−32−6506 Page 1 of 5 This Service Bulletin is available at:

B. Reason

1. Condition:

Failure investigations on the accumulator design determined that the Hydraulic System No. 2 and No. 3 brake accumulators are fatigue life limited. The established time limit for brake system accumulators for System No. 2 is 8366 landings and for System No. 3 is 5816 landings. As the accumulators were not originally identified as limited life, there has been no specific requirement to track any life cycles of these parts. As a result, some accumulators may not have sufficient records for operators to establish the total cycles on the hardware and are unable to satisfy the intent of the TLMC life limits.

2. Objective/Benefit:

This Service Bulletin gives instructions to determine the cycles for the accumulators that do not have the records of total accumulator cycles to support the fleet to establish removal instructions, and time lines based on the accumulator cycles.

C. Description This Service Bulletin gives instructions to:

− Determine the accumulator cycles for the brake accumulators in Hydraulic System No. 2 and No. 3, Part No. GW415−1250 and GW415−1200.

D. Compliance Recommended – Reliability/Dispatchability/Cost Avoidance NOTES: 1. Bombardier Aviation recommends that this Service Bulletin be done at the operator’s earliest convenience, unless otherwise directed by the airworthiness authority of the operator.

2. If it is not possible to complete all the instructions in this Service Bulletin because of the aircraft configuration, submit an SRPSA for analysis and to get an approved disposition to complete this Service Bulletin.

Standard SRPSA fees may apply. Refer to the Services section of the Bombardier customer portal for the latest prices, rates and fees.

E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.

NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.

2. The technical content of this Service Bulletin is accepted by EASA under the Canada/EU bilateral Aviation Safety Agreement.

MODEL BD−700−1A10 (BD−700) Basic Issue: Oct 27/2021 Revision 02: Mar 02/2023 700−32−6506 Page 2 of 5

F. Manpower No labor is required.

G. Material − Cost and Availability No kit or parts are necessary to do this Service Bulletin.

H. Tooling No equipment or special tools are necessary.

I. Weight and Balance No change.

J. Electrical Load Data No change.

K. References − TCCA Airworthiness Directive, CF−2022−25.

− Bombardier Aviation, Restriction and/or Special Instruction (RSI), C−01807, Rev. NC.

− GL 6500 Time Limits/Maintenance Checks (TLMC), 05−10−11.

L. Other Publications Affected None.

M. Equivalent Service Bulletins − For the Global Express and Global Express XRS BD−700−1A10 aircraft, use SB 700−32−043.

− For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−32−030.

− For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft, use SB 700−32−5020.

− For the Global 5500 BD−700−1A11 aircraft, use SB 700−32−5506.

− For the Global 6000 BD−700−1A10 aircraft, use SB 700−32−6020.

2. ACCOMPLISHMENT INSTRUCTIONS A. Special Check — Determination of Brake Accumulator Cycles NOTE: If it is not possible to complete all the instructions in this Service Bulletin because of the configuration of the aircraft, submit an SRPSA for an analysis and to get an approved disposition to complete this Service Bulletin.

MODEL BD−700−1A10 (BD−700) Basic Issue: Oct 27/2021 Revision 02: Mar 02/2023 700−32−6506 Page 3 of 5

(1) For aircraft that have not replaced the accumulator, Part No. GW415−1200 or GW415−1250 previously, the total number of landings to apply to the accumulator is equal to the aircraft landings.

(2) For aircraft that have replaced the accumulator and have landing history from the overhauled or repaired/inspected unit, or the unit was new on installation, the total landings to apply to the accumulator landings will be the sum of the previously recorded landings which accumulated on the aircraft since replacement.

NOTE: A new unused accumulator unit will have previous landings = 0.

(3) For aircraft that have replaced the accumulator and have no previous history of landings for the overhauled or repaired/inspected unit, calculate the total number of landings as follows:

Total landings = ( Service Time ) x Utilization factor (landings/month) + Installed Flight landings.

Where, Service Time = Number of months accumulated from the Manufacturing date on the accumulator name plate to the date of the present installation minus 12.

NOTE: The present installation date is determined from the current aircraft logs or maintenance records.

Utilization Factor = 22 landings/month.

Installed landings = total landings from when the unit was installed on the current aircraft to present.

B. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).

For information, correction(s), comment(s) and/or feedback regarding Service Bulletins released on the Customer Portal, please contact the Service Bulletin Group at the following email address:

bbad_SBgroup@aero.bombardier.com

3. MATERIAL INFORMATION A. Kit No kits required.

MODEL BD−700−1A10 (BD−700) Basic Issue: Oct 27/2021 Revision 02: Mar 02/2023 700−32−6506 Page 4 of 5

B. Parts No parts required.

C. Material No materials required.

D. Publications No publications required.

MODEL BD−700−1A10 (BD−700) Basic Issue: Oct 27/2021 Revision 02: Mar 02/2023 700−32−6506 Page 5 of 5

700−32−6506 Rev. 02 Mar 02/2023 SPECIAL CHECK – BRAKE CONTROL SYSTEM – DETERMINATION OF HYDRAULIC SYSTEM NO. 2 AND NO. 3 BRAKE ACCUMULATOR CYCLES (PART NO. GW415−1250 AND GW415−1200) bbad_SBgroup@aero.bombardier.com NOTE: Please use Salesforce only for troubleshooting issues or when Engineering deviation is necessary to accomplish the Service Bulletin modification.

SERVICE BULLETIN EVALUATION FORM (Your ideas will help us provide better bulletins) SERVICE BULLETIN: ISSUE: DATED:

TITLE:

For any information, correction(s), comment(s) and/or feedback regarding Service Bulletins released on the Customer Portal, please contact the Service Bulletin Group at the following email address:

SERVICE BULLETIN INCORPORATION SHEET − "700−32−6506" Upon completion of the Service Bulletin, please fill−in, fax to

(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is on another tracking system, please contact Bombardier to make arrangements for automated data submission.

700−32−6506 02

COMPLIED WITH

YES NO N/A Actual hours to accomplish Service Bulletin:

* NOTES:

Aircraft Serial No. Aircraft Reg. No.

Airframe Hours: Airframe Landings S.B. Incorporation Date Service Order No.

Facility incorporating S.B.

Name Signature Date

BOMBARDIER

SUBMISSION Service Bulletin Number Rev. * Parts Completed Remarks/Reason (Mandatory if N/A)

1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A, B, C, D, etc.) which can be carried out separately, indicate only those parts completed at this time.

2. For repetitive checks (usually PART A) only the initial check should be reported unless otherwise stated in the Service Bulletin.

3. When more than one part is carried out at the same time, each part should be reported.

4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part not installed, N/A by effectivity, N/A by Part Serial Number, etc.

5. PCW means ’Previously Complied With’.

(dd/mm/yy) Signature not required if sent by E−Mail (dd/mm/yy)