On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 21
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2016-5459; AD 2016-15-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b27c445c245f348e00ee613293e1d6c1773984033b3c56526648fc7384df8712' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b27c445c245f348e00ee613293e1d6c1773984033b3c56526648fc7384df8712' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Discard the Basic Issue of this Service Bulletin dated Feb 20/2015, and the Information Sheet dated May 05/2015 and replace in its entirety with this Revision 01.
Service Bulletin No. 700 −35−6001 Date of Basic Issue Feb 20/2015 Revision No. 01 Dated Jul 22/2015 This revision has no effect for aircraft on which the Basic Issue of this Service Bulletin was done thus no other action is necessary. Do not sign the log book if you have not done this revision. Keep the previous log book entry. You may make an entry as "Not Applicable" for this revision.
This revision is issued to:
1. Revise, in Paragraph 1, NOTE 2.
2. Add, in Paragraph 1.B., condition, evidence and objective/benefit headings.
3. Revise, in Paragraph 1.F., NOTE 3.
4. Revise, in Paragraph 1.I., the weight and moment information.
5. Remove, in Paragraphs 1.L. and 3.D., the TLMC reference.
6. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN MODEL BD−700−1A10 (BD−700) 700−35−6001 Page 1 of 1
REVISION TRANSMITTAL SHEET
ICA — MODIFICATION — OXYGEN CREW —
REPLACEMENT OF FLEXIBLE RELIEF HOSES The information below is provided for your reference. For full details, including labor and part coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME Within 2500 flight hours or 42 months, whichever comes first, from this SB release date (Basic Issue) EFFECTIVITY: A/C Serial No. 9313, 9381 and 9432 to 9704 MANPOWER: 3 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES TLMC, CH 5 AFFECTED NOYES KITS and/or PARTS YES NO
TOOLING/GSE YES NO PLANNING INFORMATION: See important information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO PREREQUISITE SERVICE BULLETINS: N/A NOTE: This SB includes Instructions for Continued Airworthiness (ICA). Refer to Paragraph 1 (Planning Information) and Paragraph 1.D. (Compliance) for details.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY www.cic.bombardier.com MODEL BD−700−1A10 (BD−700) ATA 35−10 OXYGEN Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 1 of 1 This Service Bulletin is available at:
ICA — MODIFICATION — OXYGEN CREW —
REPLACEMENT OF FLEXIBLE RELIEF HOSES
1. PLANNING INFORMATION NOTES: 1. This Service Bulletin includes Instructions for Continued Airworthiness (ICA). It is recommended that this Service Bulletin be accomplished by the specified time compliance stated in Paragraph 1.D.
2. The intent of this Service Bulletin was met on the aircraft listed in Table 1 with a proof installation copy:
TABLE 1 9606 9625 9635 9643 9609 9628 9637 9645 9619 9630 9638 9653 9620 9631 9640 − 9624 9632 9641 −
3. For any technical issues, contact CSE, Technical Support, Global Express by e−mail at SRPSA@aero.bombardier.com.
A. Effectivity BD−700−1A10 aircraft, Serial No. 9313, 9381 and 9432 to 9704.
SERVICE BULLETIN www.cic.bombardier.com MODEL BD−700−1A10 (BD−700) ATA 35−10 OXYGEN Refer to applicable governmental agency regulations and requirements and make sure that the work described in this Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
2015 Bombardier Inc. All rights reserved Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 1 of 17 This Service Bulletin is available at:
All other subsequent BD−700−1A10 aircraft are scheduled for the modification in production (Ref.: Modification Summary R700T400542).
NOTE: The instructions given in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action changes to make sure that this bulletin can be completed.
B. Reason
1. Condition:
The flexible oxygen relief hose, used to vent the oxygen from the crew oxygen bottle, has a much lower burst pressure (500 psi) than the oxygen−bottle relief device opening pressure (2500−2775 psi).
2. Evidence:
Tests performed have demonstrated that when oxygen is released, the pressure in the tube could build up to 2000 psi. This may cause the current flexible hoses to burst when the relief is triggered by an overfill/overpressure situation.
A ruptured flexible oxygen relief hose will prevent the excess oxygen from the crew oxygen bottle from venting overboard.
3. Objective/Benefit:
This Service Bulletin is issued to replace the existing low/high flexible oxygen relief hoses with a new convoluted metal hose assembly capable to withstand operating pressure (3000 psi), proof pressure (6000 psi) and burst pressure (12,000 psi).
C. Description This Service Bulletin gives instructions to:
− Get access to the low/high pressure flexible oxygen relief hoses, − Remove the existing hoses, − Install the new hoses, and − Do the necessary tests to make sure that the system operates correctly.
D. Compliance Recommended within 2500 flight hours or 42 months, whichever comes first, from this Service Bulletin release date (Basic Issue).
MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 P a g e2o f1 7
The access and time required to perform this modification are minimal, and we therefore recommend you perform it at the earliest opportunity.
NOTE: This Service Bulletin contains Instructions for Continued Airworthiness (ICA). Failure to comply with the SB within the specified time compliance stated in this paragraph could result in the issuance of an AD by regulatory authorities.
E. Approval The technical content of this Service Bulletin has been approved under the authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization (DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA in accordance with established procedures.
F. Manpower NOTES: 1. The man −hours given are estimates to help you schedule the tasks given in this bulletin. The estimates are for direct labor performed by an experienced crew and do not include the time for familiarization, planning, aircraft preparation in hangar such as towing and positioning of scaffolds, removal of interior furnishings, repainting, supervision and inspection.
For more information related to the manpower estimates, refer to SB 700−00−6002.
2. This Service Bulletin may require consumable materials that have specific curing times (refer to Paragraph 3.C.). The accumulated curing time is not included in the labor estimates and should be considered for planning purposes before you schedule this Service Bulletin.
3. Labor hours are based on the fact that the modification will be done at the next scheduled maintenance task or inspection (e.g. 750 or 1500 hour inspection etc.). Therefore no man−hours are allotted to prepare the aircraft for maintenance or to prepare for this Service Bulletin.
3 man−hours are necessary to do this modification.
The labor required to do this Service Bulletin is at no cost if:
− the work is done during new aircraft warranty period, and − the work is done at Bombardier Business Aviation Services (BBAS) or Authorized Service Facilities (ASF), and − this Service Bulletin is scheduled in less than 2500 flight hours or 42 months, whichever comes first, from its release date (Basic Issue).
MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 3 of 17
G. Material − Cost and Availability Kit 700K35−013 is necessary to do this modification.
KIT NO. PRICE 700K35−013 Please contact Bombardier Aerospace Parts Services, in Montreal, for delivery lead times and confirmation of prices.
This Service Bulletin is covered by a dedicated schedule. To ensure a timely and effective return/upgrade program, advance scheduling is required through our In−Service Implementation Team (ISIT). Please contact your Regional Manager (RM), Field Service Representative (FSR) or Customer Service Representative (CSR) as soon as is practical to schedule your aircraft.
The kit is available at no cost if:
− ordered during new aircraft warranty period, and − a no−charge purchase order is sent to Bombardier Aerospace in less than 2500 flight hours or 42 months, whichever comes first, from this Service Bulletin release date (Basic Issue).
For those aircraft in new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus does not pay for the kit at any time.
For those aircraft out of new aircraft warranty at the time of Service Bulletin distribution, Smart Parts Plus pays for the kit for up to 42 months from the Service Bulletin distribution date (Basic Issue).
H. Tooling The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Wrench, Torque 22.5 to
27.5 lbf in (2.55 to 3.10 Nm) Commercially Available − Wrench, Torque 40 to 50 lbf in (4.52 to 5.65 Nm) MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 P a g e4o f1 7
GSE REFERENCE NO. PART NO. DESCRIPTION Commercially Available − Wrench, Torque 70 to 120 lbf in (7.91 to 13.56 Nm) NOTES: 1. Refer to the Global 6000 Illustrated Tool and Equipment Manual (ITEM) to make sure that you use the correct equipment configuration.
2. Refer to the Liability Statement for the G6000 for acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy between this list and the tools called in the SPM, WM, Chapter 20, then the tools called in the SPM, WM prevail. Other approved alternative tools are acceptable and can also be used.
I. Weight and Balance
WEIGHT MOMENT +1.7 pounds (0.77 kg) +399.5 pound−inches (4.60 kgm) J. Electrical Load Data No change.
K. References − TCCA Airworthiness Directive (pending).
− FAA Airworthiness Directive (pending).
− Bombardier Aerospace, Modification Summary, R700T400542, Rev. B1.
− Bombardier Aerospace, Kit Drawing KGC991−1505, Rev. A.
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 06, 24, 35 and 52.
− Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 35.
− Global 6000 BD−700 Illustrated Tool and Equipment Manual (ITEM), Chapter 35.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapters 20 and 51.
L. Other Publications Affected − Global 6000 BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 35.
M. Equivalent Service Bulletin − For the Global Express and Global Express XRS BD−700−1A10 aircraft, use SB 700−35−013.
MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 5 of 17
− For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−35−012.
− For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft, use SB 700−35−5001.
2. ACCOMPLISHMENT INSTRUCTIONS NOTES: 1. All TASKs given in the procedures that follow are from the Global 6000 BD−700−1A10 Aircraft Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the Global 6000 BD−700−1A10 Aircraft Maintenance Manual (AMM), Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to AMM 24−00−00−910−801.
(2) Obey all oxygen −system safety precautions. Refer to AMM 35−00−00−910−801.
(3) Set the circuit breaker that follows to LOCKED. Refer to AMM 24−00−00−863−801:
SYSTEM NAME CIRCUIT BREAKER NAME BUS NAME
OXYGEN OXYGEN BATT
(4) Remove the forward equipment −compartment access−panels (131AL/132AR).
Refer to AMM 52−45−05−000−801.
WARNING: BE CAREFUL WHEN YOU DO WORK ON OR NEAR THE CAPILLARY LINES. CAPILLARY LINES CAN BE EASILY DAMAGED. IF THEY ARE DAMAGED, IT CAN CAUSE INJURY TO PERSONNEL AND DAMAGE TO EQUIPMENT.
CAUTION: USE TWO WRENCHES WHEN YOU REMOVE/TORQUE THE HOSES/TUBES. USE ONE WRENCH TO HOLD THE FITTING,
AND THE OTHER WRENCH TO LOOSEN/TORQUE THE COUPLING NUT. IF YOU DO NOT DO THIS, YOU CAN CAUSE DAMAGE TO THE COMPONENTS.
(5) Set the oxygen system to OFF. Refer to AMM 35 −10−00−000−802.
MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 P a g e6o f1 7
B. Modification
(1) Remove and discard the Low Pressure/High Pressure discharge system hoses. Refer to AMM 35−10−00−000−802 and Kit Drawing KGC991−1505.
NOTES: 1. Fill lines may be disconnected for access.
2. Put protective covers on all openings.
CAUTION: DO NOT CONTAMINATE INNER BORE OF THE OXYGEN LINES.
SPECIAL CARE MUST BE TAKEN WITH OXYGEN SYSTEM FOR
CLEANING PROCESS AND USE OF COMPOUNDS TO MINIMIZE THE RISK OF EXPLOSION AND/OR FIRE.
CAUTION: THE MINIMUM BEND RADIUS OF THE HOSE IS 1.50".
EXCESSIVE BENDING OF THE LINE WILL CAUSE DAMAGE TO THE HOSE, MAKING IT UNSERVICEABLE.
CAUTION: USE THREAD COMPOUND THAT IS APPLICABLE TO THE TYPE AND LOCATION OF THE PLUMBING LINES. IF YOU DO NOT DO
THIS, THE THREAD COMPOUND CAN CAUSE CONTAMINATION
OF THE SYSTEM WHICH CAN CAUSE DAMAGE TO THE EQUIPMENT.
(2) Install the convoluted metal hoses. Refer to AMM 35 −10−00−400−802 and Kit Drawing KGC991−1505, NOTES 4, 5, 6 and 7. Refer to Figure 1 and Figure 2 of this Service Bulletin.
NOTES: 1. Make sure that the mating surfaces are clean with no corrosion, paint, grease, or preservation fluids.
2. Apply thread compound to fittings. Refer to SPM Chapter 20.
3. The tee connectors can be adjusted to suit hose installation.
4. No fouling condition acceptable.
CAUTION: USE TWO WRENCHES WHEN YOU INSTALL/TORQUE THE HOSES/TUBES. USE ONE WRENCH TO HOLD THE FITTING,
AND THE OTHER WRENCH TO TIGHTEN/TORQUE THE COUPLING NUT. IF YOU DO NOT DO THIS, YOU CAN CAUSE DAMAGE TO THE COMPONENTS.
(3) Torque the plumbing line fittings. Refer to SPM Chapter 20, "Torquing of Plumbing Line Fittings in the Oxygen System".
(4) Make a continuous straight stripe across each set of torqued fittings with the lacquer. Refer to SPM Chapter 20, "Torquing of Plumbing Line Fittings in the Oxygen System".
C. Testing
(1) Do an electrical bonding test of the oxygen supply tubes. Refer to SPM Chapter 51, "Electrical Bonding Test".
MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 7 of 17
WARNING: BE CAREFUL WHEN YOU DO WORK ON OR NEAR THE CAPILLARY LINES. CAPILLARY LINES CAN BE EASILY DAMAGED. IF THEY ARE DAMAGED, IT CAN CAUSE INJURY TO PERSONNEL AND DAMAGE TO EQUIPMENT.
WARNING: MAKE SURE THAT YOU SAFETY THE STORAGE-CYLINDER REGULATOR SWITCH TO THE ON POSITION WITH LOCKWIRE.
IF THE SWITCH IS CLOSED, THERE WILL BE NO OXYGEN IN THE OXYGEN SYSTEM. THIS CAN CAUSE INJURY TO PERSONS.
(2) Start the oxygen system. Refer to AMM 35 −10−00−400−802.
(3) In the flight compartment, on the ELECTRICAL control panel, set the BATT MASTER switch to ON.
(4) Set the circuit breaker that follows to IN. Refer to AMM 24−00−00−863−802:
SYSTEM NAME CIRCUIT BREAKER NAME BUS NAME
OXYGEN OXYGEN BATT NOTES: 1. On the EICAS, make sure that you do not get the message OXY LO QTY on the primary display.
2. On the EICAS, on the secondary display, make sure that oxygen shows 97% to 100%.
(5) In the flight compartment, on the ELECTRICAL control panel, set the BATT MASTER switch to OFF.
D. Close −out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Install the forward equipment −compartment access−panels (131AL/132AR).
Refer to AMM 52−45−05−400−801.
E. Recording When this Service Bulletin is completed, make an entry in the aircraft log and send the attached Incorporation Notice to Bombardier Business Aircraft Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are requesting your feedback. Please take a moment to fill out our easy on−line Service Bulletin survey:
http://csefeedback.aero.bombardier.com MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 P a g e8o f1 7
3. MATERIAL INFORMATION A. Kit Kit 700K35−013 is necessary to do this Service Bulletin and contains the parts that follow:
NEW PART NO. QTY ITEM USED PART NO.
INSTRUCTIONS
- DISPOSITION 3951−04−116 2 Hose Assy 32212E0090C or 38913−04−0090 Discard 3953−04−097−180 1 Hose Assy 32212E0140C or 38913−04−0140 Discard 3953−04−106−195 1 Hose Assy 32212E0100C or 38913−04−0100 Discard 3953−04−145−070 1 Hose Assy 32212E0090C or 38913−04−0090 Discard 3954−04−110−025 1 Hose Assy 32212E0140C or 38913−04−0140 Discard 3954−04−147−145 1 Hose Assy 32212E0060C or 38913−04−0060 Discard 3954−04−167−260 1 Hose Assy 32212E0140C or 38913−04−0140 Discard NOTE: In case of discrepancy between this list and the Service Bulletin Kit Parts List contained in the respective kit, then the latter list prevails.
B. Parts No parts required.
C. Material The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aerospace does not pay for these consumables.
MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 9 of 17
DESCRIPTION PART NO./NAME
SPECIFICATION QUANTITY SUPPLIER Grease, Aircraft and Instrument Fuel and Oxidizer Resistant − MIL−PRF−27617 Type II (for straight threads) As Necessary Code: A Lacquer, Cellulose Nitrate Gloss, for Aircraft − TT−L−32 Color White As Necessary Code: B Epoxy, Coating Clear − MIL−C22750 As Necessary Code: C NOTES: 1. Refer to the table that follows for each supplier’s address listed by codes.
2. The Curing Time (CT), if applicable, for each consumable material is indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the supplier was valid and accurate. In the event that this information has changed, the operator is encouraged to use the World Wide Web to find a local supplier.
SUPPLIERS ADDRESSES BY CODES Code: A Dupont Canada Inc 201 Blair St. S.
Whitby, Ontario Canada, L1N 1W2 Tel.: (514) 555−1212 www.dupont.ca Code: B Randolph Products Co.
33 Haynes Cir.
Chicopee, MA, 01020−3712 U.S.A.
Tel.: (413) 592−4191 www.randolphproducts.com Code: C Tempo Aerospace Inc.
205 Fenmar Dr.
Toronto, Ontario Canada, M9L 2X4 Tel.: (416) 746−2233 www.tempo−aerospace.com MODEL BD−700−1A10 (BD−700) Basic Issue: Feb 20/2015 Revision 01: Jul 22/2015 700−35−6001 Page 10 of 17