TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f7c2bca97c2e09843fe0f1dc05586d13133bafe72fe24a2f05e33a355f679681' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'f7c2bca97c2e09843fe0f1dc05586d13133bafe72fe24a2f05e33a355f679681' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Tx Ltr SB 84-52-77 Page 1 of 2 Revision ‘C’ 05 Jun 2014 RR DHC-8 (DASH 8) SERVICE BULLETIN 84-52-77 Doors - Forward Passenger Door - Step Assembly - Special Inspection and Rectification This page transmits Revision ‘C’ of Service Bulletin 84-52-77, pages 1 thru 10, dated 05 Jun 2014.
This service bulletin is re-issued in its entirety for the reasons that follow:
-t h e Compliance section is revised to include the AD revision number -t h e Description section is revised to include an inspection thru the end panel assembly -t h e Material - Price and Availability section is revised to correct a typographical error -t h e References section is revised to convey the latest revision of the service bulletin, engineering documentation, attached Appendix A and AD -t h e ACCOMPLISHMENT INSTRUCTIONS - Procedure section is revised to add Figure 3, which provides the location of the end panel assembly -t h e ACCOMPLISHMENT INSTRUCTIONS - Procedure section is revised to add the reference to new Figure 1, which shows the location of the end panel assembly -t h e Close Out section is revised to convey the latest reviison
- Figure 1, sheets 1 and 2 added Remove the previsious revision of Service Bulletin 84-52-77 with its attached VSB and Bombardier Appendix A, and replace with attached.
Previous issue(s) of Service Bulletin 84-52-77:
Initial issue - Pages 1 thru 16 dated 31 Aug 2012 Revision A - Pages 1 thru 6 dated 24 Apr 2013 Revision B - Pages 1 thru 8 dated 31 Oct 2013 Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 1 of 29
SERVICE BULLETIN 84-52-77 Tx Ltr SB 84-52-77 Page 2 of 2 Revision ‘C’ 05 Jun 2014 RR This Page Intentionally Blank 1 Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 2 of 29
D S.B. 84-52-77 Page 1 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR
SERVICE BULLETIN Customer Support ATA SYSTEM: 5211 NUMBER: 84-52-77
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
URGE OPERATORS TO PROMPTLY EVALUATE THE CONTENTS SUBJECT: Doors - Forward Passenger Door - Step Assembly - Special Inspection and Rectification
1. PLANNING INFORMATION A. Effectivity Aircraft Affected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Numbers 4001, 4003 thru 4393, with the airstair door step assemblies (part number 85217008-001) containing serial numbers SAC0001 thru SAC0016 and SAC0018 thru SAC0097 installed. Also include any part in this range that may have a sufffix after the number.
NOTE: All Aircraft Serial Numbers 4394 and subsequent have been addressed in production.
NOTE: The instructions in this Service Bulletin are only applicable to the systems and parts installed at the time of delivery on the aircraft or as changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC or equivalent action c h a n g e st om a k es u r et h i sb u l l e t i nc a nb ec o m p l e t e d .
Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 3 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 2 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR Spares Affected:
The following is a list of spares affected by this change. Review spares and procurement systems to determine the existence of any listed parts. See Paragraph 2.D., Existing Parts Accountability, for disposition.
Part Number Description 85217008-001 Step Assembly B. Reason Problem: When bonding the airstair steps to the airstair sidewalls it is possible that the epoxy compound at the mortise and tenon stair-to-sidewall joints may have been omitted. This can cause the sealant applied between the airstair steps and the airstair sidewalls to crack and/or to make a clearance at the joint where moisture can get in. The latter can have an effect on the structural integrity of the steps and the passenger exit.
Solution: This service bulletin provides the instructions to do an inspection of the airstair step assembly to record the serial number, or perform an electronic tap test inspection if a serial number cannot be found, and determine if a replacement of the airstair step assembly is necessary.
C. Description The procedures in this service bulletin give the instructions to do the tasks that follow:
- aircraft is put into standard configuration for maintenance
- aircraft electrical power is removed
- the nose landing gear lock is engaged
- the main landing gear lock pins are inst alled through each main gear and main gear door mechanism
- access is gained to the airstair door Part A - Inspection of the Airstair Step Assembly :
- the aft sidewall of the airstair step assembly is inspected through the end panel assembly and the serial number is recorded. A boroscope may be required.
- if the serial number is not found through the end panel assembly, the stair tread light assembly or assemblies are removed.
- the aft sidewall of the airstair step assembly is inspected through the light assembly recess and the serial number is recorded. A boroscope may be required.
Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 4 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 3 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR NOTE: Sealant cracking between the affected airstair steps and airstair sidewall is expected. No action is necessary to rectify this condition.
- if the serial number is not found through the end panel assembly or the light assemblies, the door shell or the airstair step assembly is removed to help find and record the serial number.
- if the serial number is found and is not in the affected range, the airstair step assembly is returned to serviceble use.
- if the serial number is found and is in the affected range, then the affected airstair step assembly must be replaced as instructed in the attached Short Brothers Service Bulletin D8400-52-0011.
- if the serial number is not found, perform an electronic tap test, as instructed in the attached Bombardier Appendix A to confirm the existence of epoxy compound
- if the existence of epoxy compound is confirmed, reidentify the airstair step assembly as instructed in the attached Bombardier Appendix A
- a record is made in the applicable logbook(s) that the inspection has been done
- close out.
- if the existence of epoxy compound is not confirmed, then the affected airstair step assembly must be replaced as instructed in the attached Short Brothers Service Bulletin D8400-52-0011.
- a record is made in the applicable logbook(s) that the inspection has been done
- close out.
Part B - Replacement of the Airstair Step Assembl y:
- a replacement airstair step assembly is installed on the airstair door assembly.
- the airstair door assembly is installed o n the aircraft as instructed in the attached Short Brothers Service Bulletin D8400-52-0011.
- a record is made in the applicable logbook(s) that the inspection and replacement have been done.
- close out.
Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 5 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 4 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR D. Compliance Bombardier Inc. recommends incorporation of this service bulletin at the earliest opportunity unless otherwise directed by the operator’s airworthiness authority.
Transport Canada Airworthiness Directive CF-2013-20R1.
E. Approval The technical content of this service bulletin has been approved under the authority of the Transport Canada Civil Aviation (TCCA) Design Approval Organization No: DAO #93-Q-02.
This Service Bulletin does not affect Airworthiness Limitations (AWLs) or Damage Tolerance Inspections (DTIs).
F. Manpower Part A - Inspection It will take an estimated 4 man-hours to complete the inspection of the airstair step assembly. The breakdown of man -hours is shown in the table that follows:
TASK MAN-HOURS Job Set-Up 1.00 Procedure in Part A 1.50 Test / RTS 1.00 Close-Out 0.50 For any on-site labor assistance, please speak with a Fleet Services representative for a quote. The Fleet Services group can be contacted via the Q Series Technical Help Desk by telephone at 416-375-4000 or email at :
thd.qseries@aero.bombardier.com PART B - Rectification It will take an estimated 9 man-hours to complete the rectification in this service bulletin. The breakdown of man -hours is shown in the table that follows:
TASK MAN-HOURS Job Set-Up 0.50 Procedures in Part B 7.00 Test / RTS 1.00 Close-Out 0.50 Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 6 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 5 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR G. Material - Price and Availability The affected range is serial numbers SAC0001 thru SAC0016 and SAC0018 thru SAC0097.
Replacement airstair step assembly (part number 85217008-001) is available through the Service Bulletin Support team. For any terms and conditions, Operators should contact this group at:
Facsimile: (416) 375-3060 Telephone: (416) 375-3920 e-mail address: sbkits@aero.bombardier.com For airstair door assembly replacement, refer to the attached Short Brothers Service Bulletin D8400-52-0011.
H. Tooling - Price and Availability None I. Weight and Balance None J. Electrical Load Data Not affected K. Publications Affected None L. References Revision ‘C’ of this service bulletin was prepared to the engineering drawings and related data that follows:
Maintenance Manual PSM 1-84-2................................
Structural Repair Manual PSM 1-84-3............................
Dash 8 Illustrated Parts Catalogue PSM 1-84-4....................
PCA 43429 Revision -- (for internal reference only) Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 7 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 6 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR Short Brothers Service Bulletin D8400-52-0011 Bombardier Appendix A Transport Canada Airworthiness Directive CF-2013-20R1
2. MATERIAL INFORMATION A. Parts Required Per Aircraft Refer to the attached Short Brothers Service Bulletin D8400-52-0011.
Refer to Bombardier Appendix A.
B. Parts Required to Modify Spares None C. Special Tools and Equipment Required Portable electronic tap tester Mitsui Woodpecker WP-632AM or WP-632M.
Calibration test standard (CTS) EXBD400-51325-101 or similar test piece (ex:
DHC29051001).
D. Existing Parts Accountability Refer to the attached Short Brothers Service Bulletin D8400-52-0011.
3. ACCOMPLISHMENT INSTRUCTIONS A. Job Set-Up
(1) Placard and select all aircraft electrical power to OFF, if necessary. Obey all relevant WARNINGS and CAUTIONS (refer to AMM TASK 24-00-00-861-802 and AMM TASK 24-00-00-910-801).
(2) Make sure that lock pins are installed through each main gear and main gear door mechanism.
(3) Make sure the nose gear ground lock is engaged.
(4) Access is gained to the airstair door.
B. Procedure
(1) Do the inspection of the airstair step assembly, as instructed in the attached Short Brothers Service Bulletin D8400-52-0011. Refer to Figure 1 for inspection through the end panel assembly.
Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 8 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 7 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR NOTE: Sealant cracking between the affected airstair steps and airstair sidewall is expected. No action is necessary to rectify this condition.
(2) if the serial number is not in the affected range, do the Close Out section of this service bulletin.
(3) if the serial number is in the affected range, do the replacement of the airstair step assembly, as described in the attached Short Brothers Service Bulletin D8400-52-0011, and then do the Close Out section of this service bulletin.
NOTE: Before installing the replacement airstair step assembly, check that its serial number is not in the affected range. Refer to section 1. G.
Material - Price and Availability of this service bulletin.
(4) if the serial number is not found, or is illegible, do an electronic tap test to determine the existence of the epoxy compound between the mortise and tenon joints, as instructed in the attached Bombardier Appendix A.
(5) if the existence of the epoxy compound is confirmed, reidentify the airstair step assembly, as instructed in the attached Bombardier Appendix A, then do the Close Out section of this service bulletin.
(6) if the existence of the epoxy compound is not confirmed, do the replacement of the airstair step assembly as instructed in Part B of the ACCOMPLISHMENT INSTRUCTIONS of the attached Short Brothers Service Bulletin D8400-52-0011, then do the Close Out section of this service bulletin.
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On completion of this service bulletin, make an entry that conforms to local regulatory requirements in the appropriate logbooks: “Service Bulletin 84-52-77 Revision C Doors - Forward Passenger Door - Step Assembly - Special Inspection and Rectification accomplished”.
Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 9 of 29
Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 10 of 29 SERVICE BULLETIN 84-52-77
MAIN LANDING GEAR
LOCK PIN STOWAGE Inspection Through the End Panel Assembly - FWD Passenger Door Figure 1 (Sheet 1) 31 Aug 2012 S.B. 84-52-77 Revision 'C' 05 Jun 2014 Page 8 of 10 RR
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 9 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR Inspection Through the End Panel Assembly - FWD Passenger Door Figure 1 (Sheet 2) Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 11 of 29
SERVICE BULLETIN 84-52-77 S.B. 84-52-77 Page 10 of 10 31 Aug 2012 Revision ‘C’ 05 Jun 2014 RR This Page Intentionally Blank 1 Bombardier PDF Merged Document SB 84-52-77C_05 Jun 2014 & Shorts VSB D8400-52-0011Revision C_February 26, 2014 Page 12 of 29