Service bulletin · CASA

Revision 2AOT-CN235-55-0009-R2 · 10 pages · 291 KB

© CASA. Filed by the FAA in regulations.gov docket FAA-2024-2134, the docket of AD 2024-24-04. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-2134 (document 0005) · AD 2024-24-04

Manufacturer
CASA
Type
Service Bulletin
Number
AOT-CN235-55-0009
Latest revision known
AOT-CN235-55-0009, Revision 2

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 10

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © CASA. Filed by the FAA in regulations.gov docket FAA-2024-2134, the docket of AD 2024-24-04. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '305c75bd2c95205177baf38795c509e7fbecd7dff31a2669b22427891c17e5cd'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Ref No.: AOT - CN235 - 55 - 0009 Rev No.: 2 Rev Date: 2 9 /0 9 / 202 3

SERVICES DIRECTORATE Pº John Lennon s/n 28906 Getafe, Madrid, SPAIN mta.technicalservice@es.airbus.com

Alert Operators Transmission Page : 1 / 10 ATA Chapter: 55 - 00 - 00 Subject:

CN - 235 - A TA55 - Aft Fitting s Of Horizontal Stabilizer Inspection

Aircraft Type: CN - 235 Applicability: ALL Referenced Documents:

Ref.1 NDTM 55 - 15 - 01 (last published issue).

Ref.2 AMM 06 - 41 - 55 (last published issue).

R ef. 3 SIL - CN235 - 51 - 0001 (last published issue).

Ref.4 NDTM 51 - 60 - 00 (last published issue).

Ref.5 AOT - CN235 - 55 - 0009 - I00.

Ref.6 AOT - CN235 - 55 - 0004 - I01 .

Ref.7 AOT - CN235 - 55 - 0009 - I01 .

Ref.8 CMM Section 4 (last published issue).

Ref.9 AMM 20 - 50 - 00 (last published issue).

Ref.10 SRM 51 - 75 - 11 (last published issue).

Ref.11 AMM 55 - 11 - 10 (last published issue).

NOTE: This AOT is considered by Airbus DS as a Mandatory Action © AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall not be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

This Information is of origin Airbus DS / Spain and does not contain any export controlled Information .

1. REASON FOR REVISION Rev.0: I s the first issue of the AOT .

Rev. 0 1: Revision 01 is released due to the following:

 AOT - CN235 - 55 - 0009 - I01 superse des visual AOT - CN235 - 55 - 0004 - I01 . A grace period is included for A/C which have already perfor med visual AOT - CN235 - 55 - 0004 - I01 and AOT - CN235 - 55 - 0009 - I00 .

 Threshold and Interval s updated.

 Inspection of possible reworks in radii included.

Rev. 0 2: Revision 02 is released due to the following:

 Removing/Installation of LH and RH Stabilizers for performing properly the inspections (only the first inspection according to AOT - CN235 - 55 - 0009 - I02) .

 Removal/Restoring the surface protection for performing properly the inspections (only the first inspection according to AOT - CN235 - 55 - 0009 - I02) .

 Inspection Man Hours updated.

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 2 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

2. REASON

2.1 FACTS One CN - 235 Operator recently reported a crack on the Horizontal Stabilizer to Fuselage Rear Attachment Fitting (Horizontal Stabilizer side) P/N: 35 - 31212 - 1601 of one aircraft.

The crack is located on the upper corner of th e Rear Attachment Fitting Lug , LH side of the aircraft. For more details of the affected area , see Figure 1 in Annex 1.

2.2 CONSEQUENCES The CN - 235 Horizontal Tail Plane (HTP) structure is attached to the Rear Fuselage by means of m achined Attachment Fitting (forward and rear).

This crack may degrade the structural integrity of the LH and RH Rear Attachment Fitting and could cause the rupture of the lugs of these fittings.

2.3 AIM The aim of this communication is to inform about this issue and to verify the integrity of the LH and RH Rear Attachment Fittings by means of repetitive HFEC inspection s as per Ref.1 of the Horizontal Stabilizer to Fuselage Rear Attachment Fitting Upper and Lower lugs .

2.4 INVESTIGATION (IF AP PLICABLE) The result of the preliminary investigation performed by Airbus Defence and Space has shown that all the CN - 235 aircraft have to be inspected to ensure that potential cracks are detected.

3. SHORT TERM ACTION

3.1 PLANNING AND MANPOWE R

3.1.1 ACCOMPLISHMENT TIMES CALE The repetitive inspection described in paragraph 3.2.2 has to be performed in all aircraft included in the applicability:

- Aircraft used for Maritime Patrol Operations :

 From A/C first flight the first inspection is set at 1500 F C or 1500 FH (whichever occurs first) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded or 1500FC or 15 00FH from first flight , the grace period for performing the AOT - CN2 35 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date .

Interval of repetitive HFEC inspection: 600 FC or 600 FH (whichever occurs first).

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 3 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

 If A/C has already performed AOT - CN235 - 55 - 0004 - I01 , the n ext inspection is set at next A - check or 600FC or 600FH ( whichever occurs first ) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded or 600FC or 600FH from AOT - CN235 - 55 - 0004 - I01 , the grace period for performing the AOT - CN2 35 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date .

Interval of repetitive HFEC inspection: 600FC or 600 FH (whichever occurs first).

 If A/C has already performed AOT - CN235 - 55 - 0009 - I0 0 or AOT - CN235 - 55 - 0009 - I01 , the next inspection is set at next 600FC or 600FH ( whichever occurs first ) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded 600FC or 600FH from AOT - CN235 - 55 - 0009 - I00 or AOT - CN235 - 55 - 0009 - I01 , the grace period for performing the AOT - CN 235 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date.

Interval of repetitive HFEC inspection: 600FC or 600 FH (whichever occurs first).

- Aircraft used for Logistic Transport Operations :

F rom MSN001 to MSN154 (both included):

 From A/C first flight the first inspection is set at 5500FC or 5500FH (whichever occurs first) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded or 5500FC or 55 00FH from first flight , the grace period for performing the AOT - CN2 35 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date

Interval of repetitive HFEC inspection: 2200FC or 2200 FH (whichever occurs first).

 If A/C has already performed AOT - CN235 - 55 - 0004 - I01 , the next inspection is set at next A - check or 2200FC or 22 00FH ( whichever occurs first ) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded or 22 00FC or 22 00FH from AOT - CN235 - 55 - 0004 - I01 , the grace period for performing the AOT - CN2 35 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date.

Interval of repetitive HFEC inspection: 2200FC or 2200 FH (whichever occurs first).

 If A/C has already performed AOT - CN235 - 55 - 0009 - I00 or AOT - CN235 - 55 - 0009 - I01 , the next inspection is set at next 22 00FC or 2200FH ( whichever occurs first ) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded 2200FC or 22 00FH from AOT - CN235 - 55 - 0009 - I00 or AOT - CN235 - 55 - 0009 - I01 , the grace period for performing the AOT - CN 235 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date.

Interval of repetitive HFEC inspection: 2200FC or 2200 FH (whichever occurs first).

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 4 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

F rom MSN155 onwards:

 From A/C first flight the first inspection is set at 4500FC or 4500FH (whichever occurs first) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded or 4500FC or 45 00FH from first flight , the grace period for performing the AOT - CN2 35 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date .

Interval of repetitive HFEC inspection: 1750FC or 1750 FH (whichever occurs first).

 If A/C has already performed AOT - CN235 - 55 - 0004 - I01 , the next inspection is set at next A - check or 1750FC or 175 0FH ( whichever occurs first ) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded or 175 0FC or 175 0FH from AOT - CN235 - 55 - 0004 - I01 , the grace period for performing the AOT - CN2 35 - 55 - 0009 - I0 2 is 50FC or 50FH ( whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date.

Interval of repetitive HFEC inspection: 1750FC or 1750 FH (whichever occurs first).

 If A/C has already performed AOT - CN235 - 55 - 0009 - I00 or AOT - CN235 - 55 - 0009 - I01 , the next inspection is set at next 175 0FC or 1750FH ( whichever occurs first ) and will be performed with HFEC as per AOT - CN235 - 55 - 0009 - I0 2 .

If A/C has exceeded 1750FC or 175 0FH from AOT - CN235 - 55 - 0009 - I00 or AOT - CN235 - 55 - 0009 - I01 , the grace period for performing the AOT - CN 235 - 55 - 0009 - I0 2 is 50FC or 50FH (whichever occurs first) from AOT - CN235 - 55 - 0009 - I0 1 release date.

Interval of repetitive HFEC inspection: 1750FC or 1750 FH (whichever occurs first).

3.1.2 MANPOWER The estimated time to get access and perform the inspection is 1 5 man hours per aircraft (only the first inspection according to AOT - CN235 - 55 - 0009 - I02).

The estimated time to get access and perform the inspection is 8 man hours per aircraft ( for repetitive inspections according to AOT - CN235 - 55 - 0009 - I02 ) .

3.2 DESCRIPTION

3.2.1 ACCESS

- The area to be inspected is accessible through removing /installing as per Ref.2 Tail Section Access Panels 332AB, 342AB, 332AT and 342AT .

- A lso removing/installing the LH and RH Horizontal Stabilizers as per Ref.11 ( only the first inspection according to AOT - CN235 - 55 - 0009 - I02) .

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 5 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

3.2.2 INSPECTION REQUIREME NTS  Remove surface protections as per Ref.8 on radi i and flange (see Figure 5 for area to remove surface protections ) in order to determine if reworks found on flange and radi i area and if the radi i dimension is R=4mm or has a sharp corner ( only the first inspection ac cording to AOT - CN235 - 55 - 0009 - I02).

 Perform HFEC inspection as per Ref.1 of the Horizontal Stabilizer to Fuselage Rear Attachment Fitting Upper and Lower lugs, LH and RH side of the aircraft ( FWD and AFT sides) , paying special attention to possible cracks (see Figure 2 and Figure 3 in Annex 1). In addition, the HFEC inspection as per Ref.1 has to be performed in the area marked in grey, including the lug radi i and flange area (see Figure 4 in Annex 1 ) ensuring crack - free condition.

 P erform DVI at radii as per Ref.4 on Horizontal Stabilizer to Fuselage Rear Attachment Fitting Upper and Lower lugs, LH and RH side of the aircraft (FWD and AFT sides), paying special attention to possible reworks on radii and flange area and if the radi i dimension is R=4mm or has a sharp corner (see Figure 5 of Annex 1 as example) , ( only the first inspection according to AOT - CN235 - 55 - 0009 - I02).

 Finally, restore surface protections on the area as per Ref.9 and Ref.10 with the following painting scheme: Alodine 1200 (Z23.401) + two layers epoxy primer (Z12.113, 15 - 20µm each layer) + one layer polyurethane (Z12.380, 40 - 50µm) . ( Only the first inspection according to AOT - CN235 - 55 - 0009 - I02).

3.2.3 FINDINGS

- In case of cracks are identified, before next flight , contact Airbus Defence and Space with a detailed Damage Report as per Ref.3 to get further instructions and is totally forbidden to perform a blend - out or any action on the fitting, due to Airbus Defence and Space is performing an investigation abo ut the origin of these damages. Report back FC, FH, S/N and P/N of Horizontal Stabilizer, if there are reworks or not , the radii status and the A/C MSN .

- In case of no crack but reworks or sharp corner radii are detected, report back to Airbus Defence and Space as per Ref.3 as information to get further instructions and is totally forbidden to perform a blend - out or any action on the fitting, due to Airbus Defence and Space is performing an investigation about the origin of these damages. Report back rewor k dimensions, radii measurement, FC, FH, S/N and P/N of Horizontal Stabilizer and the A/C MSN.

- In case no cracks nor reworks nor sharp corner radii are detected also report back to Airbus Defence and Space as per Ref.3 as information .

3.3 SPARES AND TOOLING No special tooling is needed

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 6 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

4. FURTHER INFORMATION

4.1 FOLLOW - UP PLAN Further actions may be considered based upon results of the ongoing investigation .

4.2 IMPACTED DOCUMENTATI ON Repetitive inspection or an update on the schedule maintenance manual will be analyzed based on the inspection s results .

4.3 TERMINATING ACTION Terminating action of this AOT will be defined based on the inspection results .

5. REPORTING Questions about this AOT and inspection results with or without findings (See 3.2.3) are to be sent to :

Airbus DS Technical Assistance Center (AMTAC):

Telephone: (+34) 91 600 79 99 E - mail: mta.technicalservice@es.airbus.com

This AOT is or it is expected to be subject to an Airworthiness Directive or Airworthiness Directive Recommendation Letter.

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 7 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

ANNEX 1 – FIGURES

Figure 1 . Horizontal Stabilizer to Fuselage Rear Attachment Fitting Location

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 8 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

Figure 2 . Rear Attachment Fitting lugs – Cracks Location

Figure 3 . Example of cracks

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 9 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

Figure 4 . Inspection area

Reference No.: AOT - CN235 - 55 - 0009 Revision No.: 2 Date: 2 9 /0 9 /2023 Alert Operators Transmission Page : 10 / 10 ATA Chapter: 55 - 00 - 00 Subject: CN - 235 - ATA55 - Aft Fittings Of Horizontal Stabilizer Inspection

© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.

This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.

No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced o r disclosed to a third party without the express written consent of AIRBUS DEFENCE AND SPACE.

This document and its content shall n ot be used for any purpose other than that for which it is supplied.

© AIRBUS DEFENCE AND SPACE 2023 All right reserved

Figure 5 . Example of reworks and painting removal area (this example is very severe, the rework could be smaller)

Released by

Raul - Angel Garcia - Alvarez Electronically Validated HO TASST1 “The technical content of this document is approved under the authority of the DOA ref. EASA. 21.J.032.”

“The technical content of this document is approved under the authority of MDOA ref ES.PERAM21J/7001/20.”