Copy · U.S. DOT/FAA - Service Information · 4 pages

© Textron Aviation Inc. Filed by the FAA in regulations.gov docket FAA-2012-1274; AD 2013-04-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextOCR

This text is OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '6677b945e0518e40e7a4b4e84b1e4054e4deab51be2dfc61ef75661e0c01c441'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

REIMS AVIATION INDUSTRIES 51360 PRUNAY - FRANCE

REIMS AVIATION SERVICE BULLETIN N°F406-74 MANUFACTURER REFERENCE: N°F406-74 N° ATA: 53 Date: 26 September 2012 TITLE: Inspection of Nose Landing Gear Attachment Bracket P/N 6013119-1

EFFECTIVITY Model Serial Number F406 F406-0001 and ON

PURPOSE During the production phase, it has been discovered that some of the NG actuator attachment brackets P/N 6013119-1 have been manufactured in aluminum alloy, instead of steel. In order to avoid NG actuator attachment bracket failure due to weaker material they are possibly made of, it is requested to perform a one-time inspection on the incriminated parts.

NOTE: The present SB applies to all aircraft, regardless of previous accomplishment with SB No. F406-42, and to installation kits SKRA406-010.

COMPLIANCE: MANDATORY REIMS AVIATION INDUSTRIES requires compliance to the present Service Bulletin within the next 25 FH or 30 days from the date of its issue, whichever occurs first.

APPROVAL This service bulletin has been approved under the privileges of the design organization approval EASA 21J.064.

REFERENCE Maintenance manual chapter 6-20-02 page 3 (Airplane Zoning)

MAN-HOURS Approximately 0.25 man-hours.

Service Bulletin N° F406-74 Page 1/4 26 September 2012

Page 2OCROpen in PDF

REIMS AVIATION INDUSTRIES 51360 PRUNAY - FRANCE

REIMS AVIATION Grace GEC Inational

MATERIAL 1 magnet CREDIT Not applicable

ACCOMPLISHMENT INSTRUCTIONS

1) Check if the aircraft is parked and brakes engaged.

2) Gain access to the NG tunnel (zone 710 refer to MM chapter 6-20-02 page 3).

3) Check, by approaching the NG actuator attachment brackets P/N 6013119-1 with a magnet, if magnetic attraction force is experienced.

4) If magnetic attraction is experienced, the incriminated parts are correctly made of steel, therefore according to the approved design data. Fill in the "Special Inspection Form" below, and then the Aircraft can be returned to service.

5) In case of lack of attraction force between the magnet and the NG actuator attachment bracket P/N 6013119-1, replace the bracket with an airworthy part prior to next flight.

NOTE: From the date of issue of this SB, do not install on any aircraft NG actuator attachment brackets P/N 6013119-1, unless it has been determined that the parts are made of steel. This can be done in accordance with the instructions contained in the present Service Bulletin.

6013119-1 Service Bulletin N° F406-74 Page 2/4 26 September 2012

Page 3OCROpen in PDF

REIMS AVIATION INDUSTRIES 51360 PRUNAY - FRANCE

REIMS AVIATION Eroupe GEC Iatemafional

OWNER NOTIFICATION The Service Bulletin F406-74 dated 26 September 2012 will be addressed to the owners of the F406 airplanes. It is recommended to the customers to contact REIMS AVIATION INDUSTRIES for any further information relating to the application of this Service Bulletin on your airplane.

REIMS AVIATION INDUSTRIES Aérodrome de Reims Prunay 51360 Prunay LAPLAGNE Stéphan Technical Support - Customer Service Tel: 03.26.49.49.02 Fax: 03.26.49.18 57 Mail: stephan.laplagne@reims-aviation.fr Customer Support Website: https://support.bnome.be/ra/1.html Service Bulletin N° F406-74 Page 3/4 26 September 2012

Page 4OCROpen in PDF

REIMS AVIATION INDUSTRIES 51360 PRUNAY - FRANCE

REIMS AVIATION

SPECIAL INSPECTION FORM TITLE: Inspection of Nose Landing Gear Attachment Bracket P/N 6013119-1 FROM Company Name of Technical Manager:

Address Phone Fax AFFECTED AIRCRAFT F406 S/N Date:

Total flight hours:

Total landings:

Magnetic attraction: LH bracket. • YES • NO RH bracket. • YES • NO Comments:

Inspector name :..Visa

Send to REIMS AVIATION INDUSTRIES Aérodrome de Reims Prunay 51360 Prunay LAPLAGNE Stéphan Technical Support - Customer Service Tel: 03.26.49.49.02 Fax: 03.26.49.18 57 Mail: stephan.laplagne@reims-aviation.fr Customer Support Website: https://support.bnome.be/ra/1.html Service Bulletin N° F406-74 Page 4/4 26 September 2012