TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b3be3ca7299ba0f35046311cf12b56196f6b1a7624cb43609655eaec86b6caa7' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b3be3ca7299ba0f35046311cf12b56196f6b1a7624cb43609655eaec86b6caa7' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D ENGINE - HIGH
PRESSURE
TURBINE ROT OR
ASSEMBL Y (72 - 52 -
00) - HPT ROT OR
INTERST AGE SEAL REMOV AL FROM SER VICE
SERVICE
BULLETIN T able of contents
1.
REVISION
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.
SUMMAR Y .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2 A.
Reason .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.
PLANNING
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 A.
Applicability .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 B.
Concurrent requirements .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 C.
Reason .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 D.
Description .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 E.
Compliance .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 F .
Approval .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 G.
Manpower .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 H.
W eight and balance .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 I.
Electrical load data .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 J.
Software accomplishment summary .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 K.
Referenced documentation .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 L.
Documentation af fected .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 M.
Industry support information .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 N.
Interchangeability .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.
MA TERIAL
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5.
ACCOMPLISHMENT
INSTRUCTIONS .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 A.Removal of the HPT Rotor Interstage Seal (SIN:
157B0) .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 B.Installation of the HPT Rotor Interstage Seal (SIN:
157B0) .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6.
ADDITIONAL
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8 List of tables T able:
References .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2 T able 1:
Af fected HPT Rotor Interstage Seal Serial Numbers and Cycles Since New (CSN) Thresholds .
.
.
4 T able:
Spares .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D Page 1/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D List of figures Figure 1:
HPT Rotor Interstage Seal Location .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7 CFM
PROPRIET AR Y
INFORMA TION The information contained in this document is CFM proprietary information and is disclosed in confidence.
It is the property of CFM and shall not be used, disclosed to others or reproduced without the express written consent of CFM, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, design, or configuration changes or to obtain F AA or any other government or regulatory approval to do so.
If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or in part.
The information contained in this document may also be controlled by U.S.
export control laws.
Unauthorized export or re - export is prohibited.
References T able:
References T echnical Publication LEAP - 1A - 72 - 00 - 00 - 01A - 530A - C LEAP - 1A - 72 - 00 - 02 - 51A - 52AA - C LEAP - 1A - 72 - 52 - 00 - 01A - 530A - C LEAP - 1A - 72 - 52 - 00 - 07A - 53BA - C LEAP - 1A - 72 - 52 - 00 - 01A - 710A - C LEAP - 1A - 72 - 52 - 00 - 07A - 71BA - C LEAP - 1A - 72 - 00 - 02 - 51A - 72AA - C LEAP - 1A - 72 - 00 - 00 - 01A - 710A - C Management information Manufacturer recommendation:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Recommended T ask type:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Modification Original issue date:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2023 - 04 - 06
1.
REVISION
INFORMA TION Not Applicable.
2.
SUMMAR Y A.
Reason T o remove parts from service.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D Page 2/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D
3.
PLANNING
INFORMA TION A.
Applicability This Service Bulletin is applicable to:
• Engine type:
LEAP - 1A
• Engine model(s):
LEAP - 1A23,LEAP - 1A24,LEAP - 1A24E1,LEAP - 1A26,LEAP - 1A26CJ,LEAP - 1A26E1,LEAP - 1A29,LEAP - 1A29CJ,LEAP - 1A30,LEAP - 1A32,LEAP - 1A33,LEAP - 1A33B2,LEAP - 1A35A This Service Bulletin is applicable to these LEAP - 1A engines:
• LEAP - 1A engines, serial numbers 59A058, 59A253, 59A361, 59A367, 59A378, 59A406, 59A448, 59A449, 59A458, 59A468, and 598235.
These serial numbers are the best available data.
The high pressure turbine (HPT) rotor interstage seals P/N 2466M68P02, with serial numbers listed in T able 1 , are af fected by this Service Bulletin.
B.
Concurrent requirements None.
C.
Reason
(1) Objective:
T o remove parts from service.
(2) Condition:
The af fected HPT rotor interstage seals may have reduced material properties.
The condition may not allow the af fected HPT rotor interstage seals to reach their ultimate life objective.
(3) Cause:
The potential of reduced material capability may decrease fatigue life of the af fected HPT rotor interstage seals.
(4) Improvement:
The af fected HPT rotor interstage seals will be removed from service.
(5) Substantiation:
Substantiation is by analysis.
D.
Description This Service Bulletin provides serial numbers of HPT rotor interstage seals with potential reduced material capability .
This Service Bulletin recommends the removal of the af fected HPT rotor interstage seals.
E.
Compliance Category 2 CFM recommends that you do this Service Bulletin as soon as possible without ef fect on revenue service but before CSN removal thresholds listed in T able 1 below , or at the next exposure of the HPT rotor module, whichever comes first.
NOTE:
Specification of engine model(s) for applications in T able 1 :
• Commercial Application:
LEAP - 1A23, LEAP - 1A24, LEAP - 1A24E1, LEAP - 1A26, LEAP - 1A26E1, LEAP - 1A29, LEAP - 1A30, LEAP - 1A32, LEAP - 1A33, LEAP - 1A33B2, and LEAP - 1A35A.
• Corporate Application:
LEAP - 1A26CJ and LEAP - 1A29CJ.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D Page 3/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D T able 1:
Af fected HPT Rotor Interstage Seal Serial Numbers and Cycles Since New (CSN) Thresholds CSN Removal Thresholds Engine Serial Number HPT Rotor Interstage Seal Serial Number Commercial Application (Cycles) Corporate Application (Cycles) 59A058 FIA1VGM8 5,000 4,500 59A253 FIA1VMEW 5,000 4,500 59A361 NCU7102E 5,000 4,500 59A367 NCU7602E 5,000 4,500 59A378 NCU7103E 5,000 4,500 59A406 FIA1VE98 5,000 4,500 59A448 FIA1VGM4 5,000 4,500 59A449 FIA1VGM2 5,000 4,500 59A458 FIA1VGNA 5,000 4,500 59A468 FIA1VGM6 5,000 4,500 598235 NCU7101E 5,000 4,500 Impact A This recommendation is to address a condition that may af fect Flight Safety .
NOTE:
This Service Bulletin can be done in shop.
This Service Bulletin is of fered to improve the reliability or performance of your CFM product, or to help prevent the occurrence of the event or condition described in this Service Bulletin.
If the operator elects not to participate in the bulletin, that decision will be taken into consideration by CFM in evaluating future product performance issues that may arise in the operator ’ s fleet.
F .
Approval The technical content of this Service Bulletin is approved by the F AA and under the Authority of DOA No.
EASA.21J.086.
G.
Manpower After you get access to the HPT rotor assembly , you will need approximately 12 man - hours to remove the HPT rotor interstage seal.
H.
W eight and balance W eight and balance are not changed.
I.
Electrical load data Not Applicable.
J.
Software accomplishment summary Not Applicable.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D Page 4/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D K.
Referenced documentation CFM LEAP - 1A Engine Illustrated Parts Catalog (EIPC), CFM - TP - 610 EIPC.20 CFM LEAP - 1A Engine Shop Manual (ESM), CFM - TP - 610 SM.20 L.
Documentation affected None.
M.
Industry support information None.
N.
Interchangeability Not Applicable.
4.
MA TERIAL
INFORMA TION List of material sets Not Applicable.
List of support equipment Not Applicable.
List of supplies Not Applicable.
List of spares Spares New PN / SIN / MFR (New Qty) Unit $ Price (Pkg Qty) L/T New Part Name (CSN) 2466M68P03 / 157B0 / 07482
(1) 168,000 .00
(1) Quote SEAL, HPT ROT OR
INTERST AGE (01 - 220 00B, 72 - 52 -
00) NOTE:
Replenishment Lead T ime (L/T) in days.
NOTE:
Prices are provided for planning purposes and are subject to change.
List of removed spares Not Applicable.
5.
ACCOMPLISHMENT
INSTRUCTIONS A.
Removal of the HPT Rotor Interstage Seal (SIN:
157B0)
(1) Remove the core module assembly (SIN:
00104) from the engine assembly (SIN:
00002).
Refer to the LEAP - 1A ESM, 72 - 00 - 00,
DISASSEMBLE
PROCEDURE ( Refer to:
LEAP - 1A - 72 - 00 - 00 - 01A - 530A - C ).
(2) Remove the HPT rotor assembly (SIN:
15000, Figure 1 ) from the core module assembly (SIN:
00104).
Refer to the LEAP - 1A ESM, 72 - 00 - 02, REMOVE ENGINE
MODULAR
SECTION ( Refer to:
LEAP - 1A - 72 - 00 - 02 - 51A - 52AA - C ).
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D Page 5/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D
(3) Remove the af fected HPT rotor interstage seal (1, Figure 1 ) (SIN:
157B0).
Refer to the LEAP - 1A ESM, 72 - 52 - 00,
DISASSEMBLE
PROCEDURE ( Refer to:
LEAP - 1A - 72 - 52 - 00 - 01A - 530A - C ) and
DISASSEM- BLE ENGINE
SUBASSEMBLIES ( Refer to:
LEAP - 1A - 72 - 52 - 00 - 07A - 53BA - C ).
B.
Installation of the HPT Rotor Interstage Seal (SIN:
157B0)
(1) Assemble the HPT rotor assembly (SIN:
15000, Figure 1 ) with a new interstage seal
(1) (SIN:
157B0).
Refer to the LEAP - 1A ESM, 72 - 52 - 00,
ASSEMBLE
PROCEDURE ( Refer to:
LEAP - 1A - 72 - 52 - 00 - 01A - 710A - C ) and
ASSEMBLE ENGINE
SUBASSEMBLIES ( Refer to:
LEAP - 1A - 72 - 52 - 00 - 07A - 71BA - C ).
(2) Install the HPT rotor assembly (SIN:
15000, Figure 1 ) onto the core module assembly (SIN:
00104).
Refer to the LEAP - 1A ESM, 72 - 00 - 02, INST ALL ENGINE
MODULAR
SECTION ( Refer to:
LEAP - 1A - 72 - 00 - 02 - 51A - 72AA - C ).
(3) Install the core module assembly (SIN:
00104) on the engine assembly (SIN:
00002).
Refer to LEAP - 1A ESM, 72 - 00 - 00,
ASSEMBLE
PROCEDURE ( Refer to:
LEAP - 1A - 72 - 00 - 00 - 01A - 710A - C ).
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D Page 6/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
cfm The Power of Flight LEAP-1A-72-00-0492-01A-930A-D
HPT ROTOR
ASSEMBLY (SIN: 15000) STAGE 1 DISK (SIN: 158A0) LEGEND:
1. HPT ROTOR INTERSTAGE SEAL (SIN: 157B0) ICN-LEAP-1A-72000492-B-07482-00001-A-001-01 HPT Rotor Interstage Seal Location Figure 1 LEAP-1A-72-00-0492-01A-930A-D Page 7/8 Issue 001-00 - 2023-04-06 © CEM PROPRIETARY INFORMATION: Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D
6.
ADDITIONAL
INFORMA TION Not Applicable.
LEAP - 1A - 72 - 00 - 0492 - 01A - 930A - D End of data module Page 8/ 8 Issue 001 - 00 - 2023 - 04 - 06 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.