TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2cd40009899c8264e78a884e2cf48c3d9222ed8aa644e4548d21f3e2d9907ae7' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2cd40009899c8264e78a884e2cf48c3d9222ed8aa644e4548d21f3e2d9907ae7' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D ENGINE - LOW
PRESSURE
TURBINE ROT OR AND ST A T OR MODULE (72 - 58 -
00) - REMOV AL FROM SER VICE OF LPT ST AGE 5 DISKS
SERVICE
BULLETIN T able of contents
1.
REVISION
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.
SUMMAR Y .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.
PLANNING
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 A.
Applicability .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 B.
Concurrent requirements .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 C.
Reason .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3 D.
Description .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 E.
Compliance .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 F .
Approval .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 G.
Manpower .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 H.
W eight and balance .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 I.
Electrical load data .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 J.
Software accomplishment summary .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 K.
Referenced documentation .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 L.
Documentation af fected .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 M.
Industry support information .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 N.
Interchangeability .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.
MA TERIAL
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5.
ACCOMPLISHMENT
INSTRUCTIONS .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 A.General .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 B.In shop - Disassembly of the LPT Rotor Assembly:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7 C.In shop - Assembly of the LPT Rotor Assembly:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7 D.Feedback .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8 E.Parts disposition:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6.
ADDITIONAL
INFORMA TION .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12 A.
Additional information .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12 List of tables T able:
References .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2 T able 1:
Life Limit of Af fected Population of LPT stage 5 disk P/N 362 - 600 - 01 1 - 0 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4 to be continued ...
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 1/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D T able 2:
Life Limit of Af fected Population of LPT stage 5 disk P/N 362 - 600 - 01 1 - 0 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 T able 3:
Life Limit of Af fected Population of LPT stage 5 disk P/N 362 - 600 - 01 1 - 0 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5 T able:
Spares .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 T able 4:
Feedback to send to CFM PSE .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8 T able 5:
CFM Contact Information .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12 List of figures Figure 1:
LPT Stage 5 Disk Location .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10 Figure 2:
Shipping tag .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1 1 CFM
PROPRIET AR Y
INFORMA TION The information contained in this document is CFM proprietary information and is disclosed in confidence.
It is the property of CFM and shall not be used, disclosed to others or reproduced without the express written consent of CFM, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, design, or configuration changes or to obtain F AA or any other government or regulatory approval to do so.
If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or in part.
The information contained in this document may also be controlled by U.S.
export control laws.
Unauthorized export or re - export is prohibited.
References T able:
References T echnical Publication LEAP - 1A - 72 - 00 - 0002 - 01A - 930A - D LEAP - 1A - 72 - 58 - 00 - 01A - 722A - C LEAP - 1A - 72 - 58 - 00 - 06A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 07A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 08A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 10A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 1 1A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 12A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 14A - 53AA - C LEAP - 1A - 72 - 58 - 00 - 15A - 53BA - C LEAP - 1A - 72 - 58 - 00 - 36A - 53BA - C LEAP - 1A - 72 - 58 - 00 - 36A - 27AB - C to be continued ...
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 2/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D T echnical Publication LEAP - 1A - 72 - 58 - 00 - 36A - 71BA - C LEAP - 1A - 72 - 58 - 00 - 36A - 27AA - C LEAP - 1A - 72 - 58 - 00 - 15A - 71BA - C LEAP - 1A - 72 - 58 - 00 - 14A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 12A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 1 1A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 10B - 27AA - C LEAP - 1A - 72 - 58 - 00 - 07A - 27AB - C LEAP - 1A - 72 - 58 - 00 - 10A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 08A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 07A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 06A - 71AA - C LEAP - 1A - 72 - 58 - 00 - 01A - 522A - C Management information Manufacturer recommendation:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Mandatory T ask type:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Modification Original issue date:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2024 - 09 - 18
1.
REVISION
INFORMA TION Not Applicable.
2.
SUMMAR Y Not Applicable.
3.
PLANNING
INFORMA TION A.
Applicability This Service Bulletin is applicable to:
• Engine type:
LEAP - 1A
• Engine model(s):
LEAP - 1A23, LEAP - 1A24, LEAP - 1A24E1, LEAP - 1A26, LEAP - 1A26CJ, LEAP - 1A26E1, LEAP - 1A29, LEAP - 1A29CJ, LEAP - 1A30, LEAP - 1A32, LEAP - 1A33, LEAP - 1A33B2, LEAP - 1A35A The Low Pressure T urbine (LPT) Stage 5 Disks ( LPT Stage 5 Disk) P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) with the serial numbers listed in T able 1 through T able 3 are af fected by this Service Bulletin.
B.
Concurrent requirements Not Applicable.
C.
Reason LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 3/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D
(1) Objective T o remove parts from service.
(2) Condition The af fected LPT stage 5 disks may have potential reduced material properties due to non - conforming grain size.
(3) Cause The potential reduced material capability may decrease fatigue life of the af fected LPT stage 5 disks.
(4) Improvement The af fected LPT stage 5 disks will be removed from service.
(5) Substantiation Substantiation is by analysis.
D.
Description This Service Bulletin provides serial numbers of LPT stage 5 disks for which a reduced life has been identified.
This Service Bulletin also provides instructions to remove and replace the af fected parts from service.
E.
Compliance Category 2 CFM recommends that you do this Service Bulletin without ef fect on revenue service at first piece part exposure or before the removal thresholds specified in T able 1 through T able 3 below , whichever comes first.
NOTE:
LPT stage 5 Disk P/N 362 - 600 - 01 1 - 0 removed to accomplish this Service Bulletin are not allowed to be reinstalled on any other engine.
T able 1:
Life Limit of Af fected Population of LPT stage 5 disk P/N 362 - 600 - 01 1 - 0 LPT stage 5 disks Serial Numbers Life limits of - 1A23 - 1A24 - 1A24E1 - 1A26 - 1A26E1 - 1A29 - 1A30 - 1A32 - 1A33 - 1A33B2 - 1A35A Life limits of - 1A26CJ - 1A29CJ GA003989 GA003997 GA006176 GA003991 19,000 cycles 7,300 cycles LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 4/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D T able 2:
Life Limit of Af fected Population of LPT stage 5 disk P/N 362 - 600 - 01 1 - 0 LPT stage 5 disks Serial Numbers Life limits of - 1A23 - 1A24 - 1A24E1 - 1A26 - 1A26E1 - 1A29 - 1A30 - 1A32 - 1A33 - 1A33B2 - 1A35A Life limits of - 1A26CJ - 1A29CJ GA009605 GA009603 GA0101 17 GA010645 GA010742 - - - 1 1,800 cycles 2,400 cycles T able 3:
Life Limit of Af fected Population of LPT stage 5 disk P/N 362 - 600 - 01 1 - 0 LPT stage 5 disks Serial Numbers Life limits of - 1A23 - 1A24 - 1A24E1 - 1A26 - 1A26E1 - 1A29 - 1A30 - 1A32 - 1A33 - 1A33B2 - 1A35A Life limits of - 1A26CJ - 1A29CJ GA008019 GA008794 GA009872 GA010032 GA010120 GA008563 GA009874 GA009799 GA00881 1 GA010193 GA009602 GA010228 GA014872 - - - 12,600 cycles 2,700 cycles Impact A:
This recommendation is to address a condition that may af fect flight safety .
NOTE:
This Service Bulletin can be done in shop only .
NOTE:
Refer to SB:
LEAP - 1A - 72 - 00 - 0002 - 01A - 930A - D for additional information about category compliance and impact statement.
F .
Approval The technical content of this document is approved by the F AA and under the Authority of the DOA ref.
EASA.21J.086.
G.
Manpower After you get access to the LPT stage 5 disk, you will need approximately 150 man - hour(s) to do the replacement portion of this Service Bulletin.
H.
W eight and balance W eight and balance are not changed.
I.
Electrical load data Not Applicable.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 5/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D J.
Software accomplishment summary Not Applicable.
K.
Referenced documentation CFM LEAP - 1A Engine Illustrated Parts Catalog (EIPC) , CFM - TP - 610 EIPC.20 CFM LEAP - 1A Engine Shop Manual (ESM) , CFM - TP - 610 SM.20 L.
Documentation affected Not Applicable.
M.
Industry support information Not Applicable.
N.
Interchangeability Not Applicable.
4.
MA TERIAL
INFORMA TION List of material sets Not Applicable.
List of support equipment Not Applicable.
List of supplies Not Applicable.
List of spares Spares New PN / SIN / MFR (New Qty) Unit $ Price (Pkg Qty) L/T New Part Name (CSN) 362 - 600 - 01 1 - 0 / 930A5 / F0301
(1)
(1) 60 DISK, LP
TURBINE - ST AGE 5 (01 - 470 , 72 - 58 -
00) NOTE:
Replenishment Lead T ime (L/T) in days.
NOTE:
Prices are provided for planning purposes and are subject to change.
List of removed spares Not Applicable.
5.
ACCOMPLISHMENT
INSTRUCTIONS A.
General The parts and Serial Numbers af fected by this Service Bulletin must be removed from service at first piece part exposure or before the removal thresholds specified in T able 1 through T able 3 of this Service Bulletin.
This section provides instructions for disassembly and assembly of the af fected parts, at LPT rotor stator assembly level (72 - 58 -
00).
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 6/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D B.
In shop - Disassembly of the LPT Rotor Assembly:
(1) Install the LPT Rotor Stator Assembly P/N 362 - 000 - 801 - 0, 362 - 000 - 802 - 0, 362 - 000 - 803 - 0, 362 - 000 - 804 - 0 or 362 - 000 - 805 - 0 ( SIN:
90100 ) on the support equipment.
Refer to:
LEAP - 1A - 72 - 58 - 00 - 01A - 722A - C .
(2) Remove the Plugs P/N 649 - 051 - 107 - 0 ( SIN:
935B0 ), P/N 649 - 051 - 107 - 0 ( SIN:
935B1 ), P/N 649 - 051 - 107 - 0 ( SIN:
935B2 ), P/N 649 - 051 - 107 - 0 ( SIN:
935B3 ) and P/N 649 - 051 - 107 - 0 ( SIN:
935B4 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 06A - 53AA - C .
(3) Disassemble the LPT Stage 7 Equipped Blades P/N 362 - 062 - 810 - 0 ( SIN:
931A6 ) and P/N 362 - 062 - 910 - 0 ( SIN:
931B6 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 07A - 53AA - C .
(4) Remove the LPT Stage 7 Equipped Nozzle Segments P/N 362 - 064 - 305 - 0 ( SIN:
936A5 ) and the LPT Stage 7 Borescope Nozzle Segment P/N 362 - 064 - 405 - 0 ( SIN:
936B5 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 08A - 53AA - C .
(5) Remove the LPT Stage 6 and 7 Equipped Spool P/N 362 - 021 - 810 - 0 ( SIN:
930A8 ) and the LPT Stage 6 Rotating Ring P/N 362 - 062 - 1 10 - 0 ( SIN:
930B4 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 10A - 53AA - C .
(6) Remove the LPT Stage 6 Shroud Segments P/N 362 - 078 - 010 - 0 ( SIN:
935A6 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 1 1A - 53AA - C .
(7) Remove the LPT Stage 6 Equipped Nozzle Segments P/N 362 - 026 - 020 - 0 or 362 - 026 - 025 - 0 ( SIN:
936A4 ) and the LPT Stage 6 Borescope Nozzle Segment P/N 362 - 026 - 520 - 0 or 362 - 026 - 525 - 0 ( SIN:
936B4 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 12A - 53AA - C .
(8) Disassemble the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) and the LPT Equipped T orque Cone P/N 362 - 021 - 310 - 0, 362 - 021 - 330 - 0, 362 - 021 - 340 - 0 or 362 - 021 - 350 - 0 ( SIN:
930A0 ) as follows:
(a) Remove the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) and the LPT Equipped T orque Cone P/N 362 - 021 - 310 - 0, 362 - 021 - 330 - 0, 362 - 021 - 340 - 0 or 362 - 021 - 350 - 0 ( SIN:
930A0 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 14A - 53AA - C .
(b) Disassemble the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) and the LPT Equipped T orque Cone P/N 362 - 021 - 310 - 0, 362 - 021 - 330 - 0, 362 - 021 - 340 - 0 or 362 - 021 - 350 - 0 ( SIN:
930A0 ) (removal of the LPT Stage 5 Rotating Ring P/N 362 - 062 - 010 - 0 ( SIN:
930B3 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 15A - 53BA - C .
(c) Disassemble the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) (removal of the LPT Stage 5 Blades P/N 362 - 023 - 401 - 0 ( SIN:
931A4 ) and P/N 362 - 024 - 001 - 0 or 362 - 024 - 401 - 0 ( SIN:
931B4 )).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 36A - 53BA - C .
C.
In shop - Assembly of the LPT Rotor Assembly:
(1) The LPT T orque Cone P/N 362 - 021 - 310 - 0, 362 - 021 - 330 - 0, 362 - 021 - 340 - 0 or 362 - 021 - 350 - 0 ( SIN:
930A0 ) equipped with the Rear Enclosure Seal Ring P/N 362 - 021 - 910 - 0 ( SIN:
930D0 ), No.
5 Bearing Seal Ring P/N 362 - 062 - 510 - 0 ( SIN:
930D1 ) and the No.
5 Roller Bearing P/N 362 - 061 - 402 - 0 ( SIN:
915A0 ) must be installed on the assembly/disassembly fixture (956A6437).
(a) Assemble the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) as follows:
1 Do the mapping of the LPT Stage 5 Blades P/N 362 - 023 - 401 - 0 ( SIN:
931A4 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 36A - 27AB - C .
2 Assemble the LPT Stage 5 Blades P/N 362 - 023 - 401 - 0 ( SIN:
931A4 ) and P/N 362 - 024 - 001 - 0 or 362 - 024 - 401 - 0 ( SIN:
931B4 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 36A - 71BA - C .
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 7/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D 3 Do the balance check of the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 36A - 27AA - C .
(b) Assemble the LPT Stage 5 Equipped Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) and the LPT Equipped T orque Cone P/N 362 - 021 - 310 - 0, 362 - 021 - 330 - 0, 362 - 021 - 340 - 0 or 362 - 021 - 350 - 0 ( SIN:
930A0 ) (installation of the LPT Stage 5 Rotating Ring P/N 362 - 062 - 010 - 0 ( SIN:
930B3 )).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 15A - 71BA - C .
(2) Install the equipped LPT Stage 5 Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) and the equipped T orque Cone Assembly P/N 362 - 021 - 310 - 0, 362 - 021 - 330 - 0, 362 - 021 - 340 - 0 or 362 - 021 - 350 - 0 ( SIN:
930A0 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 14A - 71AA - C .
(3) Install the LPT Stage 6 Equipped Nozzle Segments P/N 362 - 026 - 020 - 0 or 362 - 026 - 025 - 0 ( SIN:
936A4 ) and the LPT Stage 6 Borescope Nozzle Segment P/N 362 - 026 - 520 - 0 or 362 - 026 - 525 - 0 ( SIN:
936B4 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 12A - 71AA - C .
(4) Install the LPT Stage 6 Shroud Segments P/N 362 - 078 - 010 - 0 ( SIN:
935A6 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 1 1A - 71AA - C .
(5) Do the balance check of the LPT Stage 6 and 7 Spool P/N 362 - 021 - 810 - 0 ( SIN:
930A8 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 10B - 27AA - C .
(6) Do the mapping of the LPT Stage 7 Blades P/N 362 - 062 - 810 - 0 ( SIN:
931A6 ) and P/N 362 - 062 - 910 - 0 ( SIN:
931B6 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 07A - 27AB - C .
(7) Install the LPT Stage 6 Rotating Ring P/N 362 - 062 - 1 10 - 0 ( SIN:
930B4 ) and the LPT Stage 6 and 7 Equipped Spool P/N 362 - 021 - 810 - 0 ( SIN:
930A8 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 10A - 71AA - C .
(8) Install the LPT Stage 7 Equipped Nozzle Segments P/N 362 - 064 - 305 - 0 ( SIN:
936A5 ) and the LPT Stage 7 Borescope Nozzle Segment P/N 362 - 064 - 405 - 0 ( SIN:
936B5 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 08A - 71AA - C .
(9) Assemble the LPT Stage 7 Blades P/N 362 - 062 - 810 - 0 ( SIN:
931A6 ) and P/N 362 - 062 - 910 - 0 ( SIN:
931B6 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 07A - 71AA - C .
(10) Install the Plugs P/N 649 - 051 - 107 - 0 ( SIN:
935B4 ), P/N 649 - 051 - 107 - 0 ( SIN:
935B3 ), P/N 649 - 051 - 107 - 0 ( SIN:
935B2 ), P/N 649 - 051 - 107 - 0 ( SIN:
935B1 ) and P/N 649 - 051 - 107 - 0 ( SIN:
935B0 ).
Refer to:
LEAP - 1A - 72 - 58 - 00 - 06A - 71AA - C .
(1
1) Remove the LPT Rotor Stator Assembly P/N 362 - 000 - 801 - 0, 362 - 000 - 802 - 0, 362 - 000 - 803 - 0, 362 - 000 - 804 - 0 or 362 - 000 - 805 - 0 ( SIN:
90100 ) from the support equipment.
Refer to:
LEAP - 1A - 72 - 58 - 00 - 01A - 522A - C .
D.
Feedback
(1) Send the serial number of the LPT Stage 5 Disk P/N 362 - 600 - 01 1 - 0 removed to CFM PSE via CSC case.
Refer to Paragraph
6.A.
ADDITIONAL
INFORMA TION for the contact information.
T able 4:
Feedback to send to CFM PSE Airline ESN TSN CSN LPT stage 5 disk Serial Number - - - - - LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 8/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D E.
Parts disposition:
LPT Stage 5 Disk P/N 362 - 600 - 01 1 - 0 ( SIN:
930A5 ) removed to accomplish this Service Bulletin must be sent to the hereafter address using the shipping tag.
Refer to Figure 2 :
Product Support Engineering LEAP SAFRAN
AIRCRAFT
ENGINES Bâtiment 60 MRC quai 26/27 Rond - Point René Ravaud 77550 Moissy Cramayel (CITY) FRANCE (COUNTR Y) LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D Page 9/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.
cfm The Power of Flight LEAP-1A-72-00-0519-01A-930A-D VIEW A STAGE 6-7 LPT SPOOL (SIN: 930A8) LPT STAGE 5 DISK P/N 362-600-011-0 (SIN: 930A5)
LPT TORQUE CONE (SIN: 930A0)
LPT SHAFT (SIN: 932A0) LEGEND:
1. LPT STAGE 1 DISK (SIN: 930A1) - 2
2. LPT STAGE 2 DISK (SIN: 930A2)
3. LPT STAGE 3 DISK (SIN: 930A3)
4. LPT STAGE 4 DISK (SIN: 930A4) CN-LEAP-1A-72000519-B-F0301-00001-A-001-01 LPT Stage 5 Disk Location Figure 1 LEAP-1A-72-00-0519-01A-930A-D Page 10/12 Issue 001-00 - 2024-09-18 © CFM PROPRIETARY INFORMATION: Subject to the restrictions on the media.
cfm|) The Power of Flight LEAP-1A-72-00-0519-01A-930A-D S saFRan Shipping TAG (Must be stuck on the box) TITLE: SE 72-0519 LPT STAGE 5 DISK REMOVAL FROM SERVICE
ENGINE SERIAL NUMBER
PART SERIAL NUMBER ICN-LEAP-1A-72000519-B-F0301-00002-A-001-01 Shipping tag Figure 2 LEAP-1A-72-00-0519-01A-930A-D Page 11/12 Issue 001-00 - 2024-09-18 © CFM PROPRIETARY INFORMATION: Subject to the restrictions on the media.
LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D
6.
ADDITIONAL
INFORMA TION A.
Additional information
(1) All communications relative to this Service Bulletin must be directed to:
T able 5:
CFM Contact Information CFM SA ZONE CFM Inc.
Zone Customer Support Center:
http://mycfmportal.com Widget AskCFM GE A viation Fleet Support:
http://www .geaviation.com/support OR OR E - mail:
cfm.csc@safrangroup.com E - mail (USA):
aviation.fleetsupport@ge.com E - mail (China and Asia):
aviation.fleetsupport.cn@ge.com OR OR PSE CFM SAFRAN Aircraft Engines Site de MELUN
MONTEREAU BP 1936 - 77019 Melun Cedex FRANCE GE A viation M/D Rm.
285 One Neumann W ay OH 45215 USA OR OR Phone:
+33 1 64 14 88 66 Fax:
+33 1 64 14 87 65 USA Phone:
877 - 432 - 3272 International Phone:
(513) 552 - 3272 China and Asia Phone:
+ 86 21 38777666 LEAP - 1A - 72 - 00 - 0519 - 01A - 930A - D End of data module Page 12/ 12 Issue 001 - 00 - 2024 - 09 - 18 © CFM
PROPRIET AR Y
INFORMA TION:
Subject to the restrictions on the media.