TextOCR
This text is OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '66587f3c21a5b9c6ef0ddd0acac0b984b20934476416491d0fbd6832d99232aa' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '66587f3c21a5b9c6ef0ddd0acac0b984b20934476416491d0fbd6832d99232aa' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ECLIPSE ECLPSE Service Bulletin AEROSPACE NUMBER: SB 500-31-019, Rev A Mandatory MODEL: ECLIPSE EA500 www.ECUPSE.cero SUBJECT: Aircraft Computer System (ACS) Sottware Update to 5.1.06
1. PLANNING INFORMATION A. Effectivity Aircraft Serial Numbers 0001 - 0265. (Pre Avio NG +1.5 - Not modified by SB 500-99-005) NOTE: Aircraft must be in the Avio NG configuration.
B. Reason Aircraft Computer System (ACS) software upgrade for enhanced functionality and product improvement.
C. Descripfion This Service Bulletin (SB) updates the ACS software version for Avio NG configured aircraft.
D. Relevant Publications None E. Compliance Eclipse Aerospace Incorporated considers this to be a mandatory upgrade that should be accomplished within 90 days or 50 hours whichever comes first.
F. Approval This Service Bulletin is based on engineering data that is FAA-approved, and the modification herein complies with the applicable regulations.
G. Labor Requirements The following information is for planning purposes only.
(3) Estimated labor hours to perform:
Suggested number of personnel: 1 ACS Software loading: 4.0 Hours Total labor hours: 4.0 Hours The above is an estimate based on properly equipped and experienced personnel complying with this Service Bulletin. Actual labor hours may vary depending on workforce experience, concurrent maintenance, discovery of other discrepancies, etc.
(2) Qualification of personnel:
• A person properly authorized to perform aircraft maintenance under 14 CFR 43 or equivalent approved by the Civil Aviation Authority having jurisdiction.
• Avio Maintenance Computer (AMC) trained.
H. Software Accomplishment Summary Upgrade ACS software to version 5.1.06 using the Avio Maintenance Computer (AMC) with software version
2.4.00 or greater.
1. References Aircraft Maintenance Manual (AMM) P/N 06-117751, latest revision.
Issued: 28 Feo 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 1 of 9
ECLIPSE ECLIPSE Service Bulletin AEROSPACE J. Publications Affected Aircraft Flight Manual, P/N 06-122204, Revision 4 or higher must be used after completion of this Service Bulletin.
K. Export Control These commodities, technology or software were exported from the United States in accordance with the Export Administration Regulations. These commodities, technology or software are intended for use only in the End User's country. An export license from the U.S. Department of Commerce may be required before these products can be re-exported, transferred, transshipped on a non-continuous voyage, or otherwise disposed of in any other country, either in their original form or after being incorporated into an end item. Diversion of this end-item or its use contrary to any applicable U.S. government license or to U.S. law is prohibited.
2 MATERIAL INFORMATION A. Materials No parts and/or kits need to be ordered for this Service Bulletin.
B. Tooling The following special tooling/support equipment is required to accomplish this Service Bulletin.
Nomenclature Part Number Use Avio Maintenance Computer (AMC) with 20-120576-1001 or To load ACS software.
software version 2.4.00 or later 20-121926-1001 ACS J08 T-harness 99-117120-2001 ACS/AMC Connection AMC ACS Software Download Box 87-120876-1003 ACS/AMC Connection USB to Ethernet Adapter SMC2209 Aircraft Interface Ethernet Cable Aircraft Interface C. Part Re-identification Enter the new SW version (ACS_5.1.06) on the ACS software label.
Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 2 of 9
ECLIPSE ECLPSE Service Bulletin AEROSPACE
3. ACCOMPLISHMENT INSTRUCTIONS A. Job Setup Sign Off
(1) Power up the AMC, select Tab 31, Software Revision drop down and verify that ACS Software version 5.1.06 is available.
NOTE: If ACS Software version 5.1.06 is not listed contact Eclipse Aerospace Service Engineering, Tel. toll free (877) 375-7978.
(2) Make the aircraft safe for maintenance. Refer to AMM 20-00-01 MAKE SAFE FOR MAINTENANCE.
B. ACS Software Update
(1) Using SUBTASK AMM-31-40-00-021-921-001, prepare ACS computers for installation of
5.1.06 software upgrade.
CAUTION: MAKE SURE ELECTRICAL POWER IS OFF WHEN CONNECTING ACS J08 T-HARNESS.
(2) AMC to ACS connection.
NOTE: Both ACSS will need to be loaded; this will require performing this procedure for both the Left and Right ACS. Step 3.A.(2)(a) provides instructions for connecting the AMC to the left ACS and Step 3.A. (2)(b) provides instructions for connecting the Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 3 of 9
ECLIPSE ECLIPSE Service Bulletin AEROSPACE Sign Off
(a) Connect AMC to left ACS as follows:
Refer to Figure 1.
4 (REF (ROTATED FOR CLARITY) SA210024535DA Left ACS - AMC Connection Figure 1
1. Disconnect aircraft harness connector 39A01P08 (7, Figure 1) from left APC connector 39A01J08 (8, Figure 1).
2. Connect APC J08 T-Harness (9, Figure 1) to left APC connector 39A01J08 (8, Figure 1).
3. Connect APC J08 T-Harness (4, Figure 1) to aircraft harness connector 39A01P08 (7, Figure 1).
4. Connect AMC ACS Download Box (3, Figure 1) to APC J08 T-Harness (4, Figure 1).
5. Connect AMC ACS Download Box USB connector (1, Figure 1) to USB port on AMC (1, Figure 1).
6. Make sure that the Program Enable switch on the AMC ACS Download Box (3, Figure 1) is in the OFF position.
7. Continue to step A.(3).
Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 4 of 9
ECLIPSE ECLIPSE Service Bulletin AEROSPACE Sign Off
(b) Connect AMC to right ACS as follows:
Refer to Figure 2.
4 (REF) 2 (REF) SAP10EDAGTSRA Right ACS - AMC Connection Figure 2
1. Disconnect aircraft harness connector 39A02P08 (9, Figure 2) from right APC connector 39A02J08 (8, Figure 2).
2. Connect APC J08 T-Harness (7, Figure 2) to right APC connector 39A02J08 (8, Figure 2).
3. Connect APC J08 T-Harness (4, Figure 2) to aircraft harness connector 39A02P08 (9, Figure 2).
4. Connect AMC ACS Download Box (1, Figure 2) to APC J08 T-Harness (4, Figure
2).
Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC SB 500-31-019 Page 5 of 9
ECLIPSE ECLIPSE Service Bulletin AEROSPACE Sign Off
5. Connect AMC ACS Download Box USB connector (6, Figure 2) to USB port on AMC (5, Figure 2).
6. Make sure that the Program Enable switch on the AMC ACS Download Box (1.
Figure 2) is in the OFF position.
Continue to step A.(3).
NOTE: Both ACSS will need to be loaded; this will require performing this procedure for both the left and right ACS.
Power up the aircraft by setting the SYS BATT and START BATT switches to ON and the BUS TIE to AUTO. (Clear any MASTER WARNINGS/CAUTIONS as needed.)
NOTE: If use of external power is required, Refer to AMM - 24-40-00-051-801 - EXTERNAL POWER - MAINTENANCE PRACTICES.
(4) On the AMC, select Tab 31 and wait for the AMC to connect. Refer to Figure 3.
Feb 27 18:21:00 UTC X AVIO Maintenance Computer Version AMC 2400 Copyright Eclipse Aerospace 8 Weigh 21 Air Cond 22 Autopilot 24 Elec Pwr 27 Fit Ctris 28 Fuel 30 De-Ice 31 Instr 32 Ldg Gear 34 Nav/Pitot 72 Engine 73 Fuel Ctrl JACS ACS Left ACS Data Right ACS Data Load ACS Software Revision SW Rev ACS_V_5.0.00 SW Rev ACS_V_5.1.06 CRC 5590C8AA CRC Load SW Ldr Rev LDR_V_4.0.00 Ldr Rev CRC F942772F CRC | Г Fuel Data Ok • Fuel Data Г CCS Data Ok • CCS Data Г Config Data Ok Г Config Data F W&B Data Ok Г W&B Data Copy to Right → + Copy to Left USe Flash Drive Init Left Data Init Right Data Write Maint Mode Off Batt: 4:15 AMC Tab 31 - For Reference Only Figure 3 NOTE: AMC Screenshot is for reference only and may vary with the AMC software revision.
(5) Connection on lower right corner of AMC will show L-ACS or R-ACS box in green, which ever is applicable.
Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 6 of 9
ECLIPSE ECLPSE Service Bulletin AEROSPACE Sign Off (G) On Load ACS dropdown box select ACS_V_5.1.06 and select the Load SW button, follow the AMC prompts after selecting the load SW button.
NOTE: Software load should take approximately five minutes.
• When software load is complete, the status box will show Loading...done.
(7) On AMC verify software ACS CRC is C2968A62. Refer to Figure 4.
AVIO Maintenance Computer Verin ANC, 2600 Copyright Eclipse Aerospace Feb 27 18:30:65 UTC X 8 Weigh 21 Air Cond 22 Autopilot 24 Elec Pwr 27 FIt Ctris 28 Fuel 30 De-Ice 31 Instr 32 Ldg Gear 34 Nav/Pitot 72 Engine 73 Fuel Ctrl JACS ACS Left ACS Data Right ACS Data Load ACS Software Revision SW Rev ACS_V_5.1.06 SW Rev ACS_V_5.1.06 CRC C2968A62 CRC Load SW Ldr Rev LDR_V_4.0.00 Ldr Rev CRC F942772F CRC Load ACS_V_5 1.06 27-Feb 2013 18 22:26 F Fuel Data Ok F Fuel Data S-rec file... venfied Clear ACS memory... done F CCS Data Ok F COS Data Loading.. done F Config Data Ok F Config Data CRC Expected C2968A62 Г W&B Data Ok • W&B Data Copy to Right + Copy to Left USB Flash Drive Init Left Data Init Right Data Write Batt: 4:21 Maint Mode Off AMC Tab 31 - For Reference Only Figure 4 NOTE: AMC Screenshot is for reference only and may vary with the AMC software revision.
Power down the aircraft by setting the SYS BATT and START BATT switches to OFF and the BUS TIE to OPEN.
CAUTION: AIRCRAFT MUST BE POWERED DOWN PRIOR TO
DISCONNECTING/CONNECTING THE T-HARNESS FROM THE ACS. DAMAGE TO EQUIPMENT COULD OCCUR.
(9) Disconnect AMC from ACS.
(a) For left ACS:
Remove APC J08 T-Harness from the left APC connector 39A01J08 and aircraft harness connector 39A01P08. Reconnect connector 39A01P08 to left APC connector 39A01J08.
Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 7 of 9
ECLIPSE ECLIPSE Service Bulletin AEROSPACE Sign Off
(b) For right ACS:
Remove APC J08 T-Harness from the right APC connector 39A02J08 and aircraft harness connector 39A02P08. Reconnect connector 39A02P08 to right APC connector 39A02J08.
(10) Write the new software version (5.1.06) on the ACS software label with a permanent ink marker.
(11) Perform software update on right ACS, do step A. (2).(b), and repeat steps A.(3) thru A. (10).
(12) Perform aircraft configuration update. Note installed options, activate and configure as required. Refer to AMM 31-40-00 AIRCRAFT COMPUTER SYSTEMS - MAINTENANCE PRACTICES.
(13) Do adjustment/test of the left and right APCs (for software update). Refer to AMM - 31-40-00-071-801 - AIRCRAFT COMPUTER SYSTEMS - ADJUSTMENT/TEST.
(14) Remove all tools, equipment, and unwanted material from work area.
(15) If no further maintenance is required, return the aircraft back to service. Refer to AMM - 20-00-02-051-801 - RETURN TO SERVICE (AFTER MAINTENANCE).
C. Limitations and Procedures Avio Maintenance Computer (AMC) must have software version 2.4.00 or higher in order to load ACS software
5.1.06.
Remove AFM TR-016 (installed by SB 500-31-026 Software Configuration Update).
D. Cost Contact Eclipse Aerospace Customer Care for cost and availability.
4. RECORD OF COMPLANCE Bulletin number. Upon completion of this Service Bulletin, make an appropriate maintenance-record entry specifying the Service
5. NOTIFYING ECLIPSE AEROSPACE On completing this service bulletin, the operator/maintainer shall complete the attached Compliance Record and send it to Eclipse Aerospace via regular mail, fax, or e-mail.
Mailing Address Eclipse Aerospace Incorporated ATTN: Customer Care 2503 Clark Carr Loop SE Albuquerque, NM 87106 Fax 1-505-241-8802 E-mail sbcompliance@eclipse.aero Issued: 28 Feb 2013 - Rev A © 2013 ECLIPSE AEROSPACE INC. SB 500-31-019 Page 8 of 9
SERVICE BULLETIN COMPLIANCE RECORD MODEL _ _AIRPLANE S/N REG. NO. _ TOTAL TIME_ (HOURS) OWNER NAME:
ADDRESS:
TELEPHONE NO. ( _ FAX NO. (_ COMPLIANCE WITH SB 500-31-019, Rev A Description of Work Performed (Inspection | Modification | Repair | Option Installation | Defect or Damage Found, if applicable) DATE