TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1032e01fc5436520a0f420889be8519e37bd8147ed70942930f418f83f62e624' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1032e01fc5436520a0f420889be8519e37bd8147ed70942930f418f83f62e624' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALERT SER VICE
BULLETIN
REVISION NOTICE ENGINE — HUB
ASSEMBL Y , 1ST ST AGE LPC ROT OR —
INSPECTION OF THE F AN HUB FOR DAMAGE T urbojet Engine Alert Service Bulletin No.
EAGP7-A72-383 Revision No.
1 dated October 12, 2017.
R e v i s i o n H i s t o r y Original Issue October 6, 2017 Revision 1 dated October 12, 2017 R e a s o n f o r t h e R e v i s i o n T o incorporate revisions based on inspection learning and provide expanded damage limits in some areas.
E f f e c t o f R e v i s i o n o n P r i o r C o m p l i a n c e None.
T h i s i s a C o m p l e t e R e v i s i o n ( N o t A p p l i c a b l e t o t h e S G M L v e r s i o n ) The contents are in accordance with the list of ef fective pages.
All pages have the current revision number .
T echnical changes are marked with black bars.
M O D E L A P P L I C A T I O N GP7270, GP7277 B U L L E T I N I S S U E S E Q U E N C E EAGP7 Series A72-383 P a g e R e v i s i o n N o .
D a t e 1 thru 24 1 October 12/17 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.
EAGP7-A72-383 Page 1 of 1
No text on this page: it may be a figure. Open the PDF to see it.
ALERT SER VICE
BULLETIN ENGINE — HUB
ASSEMBL Y , 1ST ST AGE LPC ROT OR —
INSPECTION OF THE F AN HUB FOR DAMAGE M O D E L A P P L I C A T I O N GP7270, GP7277 B U L L E T I N I S S U E S E Q U E N C E EAGP7 Series A72-383 A T A N U M B E R 72-31-00 E N G I N E A L L I A N C E , L L C .
P R O P R I E T A R Y I N F O R M A T I O N The information contained in this document is Engine Alliance, LLC (“EA”) Proprietary Information and is disclosed in confidence.
It is the property of EA and shall not be used, disclosed to others or reproduced for any purpose, including, without limitation, to design, manufacture or repair parts or to obtain F AA or other government approval to do so, without the express written consent of EA.
Neither receipt nor possession of this document alone, from any source, constitutes such permission.
Unauthorized possession, use, copying or disclosure may result in criminal and/or civil liability .
If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or in part.
This technical data is considered subject to the Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774 respectively .
T ransfer of this data by any means to a Non-US Person, whether in the United States or abroad, without the proper U.S.
Government authorization
(i.e.
export license, license exception, NLR), is strictly prohibited.
EAR Export Classification:
ECCN 9E991 C o m p l i a n c e C a t e g o r y 2 E A D i s t r i b u t i o n C o d e 2686 l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 1 of 24
S u m m a r y The purpose of this Alert Service Bulletin is to give instructions to perform a one time visual inspection of the 1st stage Low Pressure Compressor (LPC) rotor assembly , referred to as the fan hub, for damage.
Analysis of a recent uncontained engine fan rotor event indicates interim fan hub inspection action is required to mitigate a potential safety risk.
Fan hub damage must be evaluated and managed to the limits and instructions provided herein.
Fan hubs found with damage beyond the limits must be removed from service or the damage must be evaluated by Engine Alliance before the fan hub can be returned to service.
This Alert Service Bulletin supersedes Reference 5, Alert Service Bulletin EAGP7-A72-139.
P l a n n i n g I n f o r m a t i o n E f f e c t i v i t y D a t a E n g i n e M o d e l s A p p l i c a b l e GP7270, GP7277 Engine Serial No.
P5501 10 Engine Serial Nos.
P5501 12 thru P550120 Engine Serial Nos.
P550122 thru P550133 Engine Serial Nos.
P550135 thru P550177 Engine Serial Nos.
P550179 thru P550531 Engine Serial Nos.
P550533 thru P550703 C o n c u r r e n t R e q u i r e m e n t s There are no concurrent requirements.
R e a s o n
1.
Problem:
A GP7000 engine experienced an in-flight uncontained fan rotor event.
Analysis indicates action is required to mitigate a potential safety risk.
2.
Cause:
The cause of the uncontained fan rotor event is under investigation.
3.
Solution:
Perform a one time visual inspection of the fan hub for damage.
D e s c r i p t i o n Do a visual inspection of the fan hub for damage.
Damage must be evaluated and managed to the limits and instructions provided herein.
Report the inspection results to Engine Alliance as directed.
C o m p l i a n c e Category 2 Engine Alliance recommends you do this Alert Service Bulletin as soon as possible but with compliance as follows:
For fan hubs with 3,500 Cycles Since New (CSN) or more, perform visual inspection within two
(2) weeks of the original issue date of this Alert Service Bulletin.
For fan hubs with 2,000 CSN or greater and less than 3,500 CSN, perform the visual inspection within five
(5) weeks of the original issue date of this Alert Service Bulletin.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 2 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
For fan hubs with less than 2,000 CSN perform the visual inspection within eight
(8) weeks of the original issue date of this Alert Service Bulletin.
N O T E :
This Alert Service Bulletin supersedes Reference 5, Alert Service Bulletin EAGP7-A72-139.
A p p r o v a l D a t a The times between inspections specified in Compliance and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.
The aircraft T ype Certificate (TC) holder has been informed of this change.
M a n p o w e r The estimate of man-hours of labor directly necessary to do the intent of this Alert Service Bulletin are as follows:
F o r E n g i n e s I n s t a l l e d O n A i r c r a f t
1.
Necessary to gain and close access .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0
2.
Necessary to perform the visual Inspection .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0
3.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.0 F o r E n g i n e s N o t I n s t a l l e d O n A i r c r a f t
1.
Necessary to perform the visual Inspection .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1.0 C l e a n a n d F P I I n s p e c t , I f R e q u i r e d
1.
Clean and FPI Inspect, If Required .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.0
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.0 W e i g h t D a t a No Change.
E l e c t r i c a l L o a d D a t a Not Applicable.
S o f t w a r e A c c o m p l i s h m e n t S u m m a r y Not Applicable.
R e f e r e n c e s
1.
Engine Alliance Standard Practices Manual (SPM), Part No.
5700139.
2.
Engine Alliance GP7270, and GP7277, Illustrated Parts Catalog, Part No.
5700308.
3.
GP7000 Series, Engine Manual (EM), Part No.
5700147.
4.
Airbus Aircraft Maintenance Manual (AMM).
5.
Alert Service Bulletin No.
EAGP7-A72-139;
Engine — Hub Assembly , 1st Stage Low Pressure Compressor (LPC) Rotor (Fan Hub Assembly) — Inspection Of The Inner Flange Scallops For Damage.
Issue Sequence A72-139, EAGP7 Series.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 3 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
P u b l i c a t i o n s C h a n g e d Not Applicable.
I n t e r c h a n g e a b i l i t y Not Applicable.
I n f o r m a t i o n i n t h e A p p e n d i x Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 4 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
M a t e r i a l I n f o r m a t i o n M a t e r i a l — C o s t a n d A v a i l a b i l i t y
1.
There is no kit provided to do this Alert Service Bulletin.
2.
Part availability information is provided in material data Instructions — Disposition.
I n d u s t r y S u p p o r t P r o g r a m Not Applicable.
T h e m a t e r i a l d a t a t h a t f o l l o w s i s f o r e a c h e n g i n e .
N O T E :
It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.
When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .
C A U T I O N :
THE
FOLLOWING MA TERIAL DA T A T
ABLE(S) ARE
ORGANIZED BY
ILLUSTRA TED P AR TS CA T ALOG.
ALL P AR TS IN THE T
ABLE(S) MA Y OR MA Y NOT BE
APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.
YOU MUST REFER T O THE
APPROPRIA TE
ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL
APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG
SEQUENCE NUMBER.
F AILURE T O INST ALL THE P AR T(S) IN THE
CORRECT ENGINE MODEL MA Y RESUL T IN A
CONFIGURA TION THA T IS NOT F AA APPROVED.
T h e m a t e r i a l d a t a t h a t f o l l o w s i s f o r e a c h e n g i n e .
F o r G P 7 2 7 0 , G P 7 2 7 7 E n g i n e s :
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 HUB ASSY — LPC ROT OR, 1STG 5760221 (72-31-00-1-10)
(4)(X) OR 1 HUB ASSY — LPC ROT OR, 1STG 5760321 (72-31-00-1-10 A)
(4)(X) M o d i fi c a t i o n a n d S p a r e s I n f o r m a t i o n Estimated part prices are provided when they are available at time of publication.
The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.
An asterisk (*) is shown where part pricing information was unavailable.
In either case, contact Engine Alliance, LLC.
Spares Management & Logistics for firm quotations.
Parts Modification Conditions
(4) Do an inspection as specified in the Accomplishment Instructions.
Spare Parts A vailability l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 5 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
(X) See Reference 2, Illustrated Parts Catalog for applicable replacement parts.
V endor Services or Special Components/Materials Not Applicable.
R e i d e n t i fi e d P a r t s Not Applicable.
N e c e s s a r y T o o l s No more Support Equipment is necessary .
O t h e r M a t e r i a l I n f o r m a t i o n D a t a Not Applicable.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 6 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
A c c o m p l i s h m e n t I n s t r u c t i o n s N O T E :
Alert Service Bulletin incorporation on engines installed on aircraft may be desirable and should be individually evaluated.
1.
Perform a visual inspection of the 1st Stage LPC Rotor Hub Assembly , PN 5760221 or PN 5760321 as follows:
N O T E :
1st Stage LPC Rotor Hub Assembly , PN 5760221 contains detail Hub, PN 5760201.
1st Stage LPC Rotor Hub Assembly , PN 5760321 contains detail Hub, PN 5760301.
The fan blade lock does not need to be removed for this visual inspection.
A.
Remove the inlet cone, front and rear segments as specified in Reference 4, AMM T ask 72-31-41-000-803-A, Removal of the Inlet Cone or Reference 3, EM T ask 72-00-31-020-001, Remove the Inlet Cone.
B.
Do a visual examination for loose engine hardware (balance weight, balance weight rivet, balance tab or other engine hardware).
Report any findings to Engine Alliance.
C.
Do a visual examination of all visible surfaces of the fan hub for damage (nicks, dents, scratches, burning or pitting).
See Figure 1, Sheets 1 –
10.
(1) Use fluorescent (white) light and a 3X – 10X magnifying glass when inspecting Area 4, Area 5, Area 6, and Area
7.
(2) If necessary , clean damage areas by Reference 4, AMM T ask or Reference 1, SPM EAP-2202A — Aqueous Cleaner Wipe Cleaning.
(a) If necessary , EAC-0048-2 Abrasive Pad may be used to aid in cleaning.
Swirl marks from abrasive pad are permitted.
(3) Remove any high metal by Reference 4, AMM T ask 70-54-00-910-801-A Blending or Reference 1, SPM EAP-4302 — Blending.
Make sure that you do the Removal of High Metal procedure only .
(4) The following Reference 1 (SPM) methods (or equivalent), may be used to determine damage depth:
N O T E :
Use of a borescope is not recommended for damage measurement due to the size of the damage being inspected and the sensitivity of the results to technique.
The inspector is responsible for the accuracy of damage measurements.
(a) EAP-3023A — Surface Pitting And Damage Measurement (Optical Micrometer Method)
(b) EAP-3023C — Surface Pitting And Damage Measurement (Replicating Compound Method) 1 Microset 101 R T thixotropic compound is an alternative where EAC-0055 is specified.
It will harden within 5 – 10 minutes depending on ambient temperature.
All compound residue must be removed from the part surface by EAP-2201 — Solvent Wipe Cleaning after the replica is removed from the part surface.
Microset 101 R T compound is more viscous than EAC-0555 and will work well on vertical inspection surfaces.
(5) If damage is found, see T able 1 and Figure 1, Sheets 1 – 10 for disposition.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 7 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
(a) Damage in an area coated with anti-gallant that does not meet the limits of T able 1 may be evaluated again as follows:
1 Remove anti-gallant from and adjacent to the damaged area using EAC-0048-2 Abrasive Pad and EAC-0052 Acetone.
2 Re-measure the damage depth and evaluate to T able 1 limits.
D.
Do a visual inspection of visible surfaces of the fan hub for existing blends.
See Figure 1, Sheet
1.
(1) If blends are found, see T able 1 for disposition.
E.
Install the inlet cone, front and rear segments as specified in Reference 4, AMM T ask 72-31-41-400-803-A, Installation of the Inlet Cone or Reference 3, EM T ask 72-00-31-420-005, Install the Inlet Cone.
F .
Complete the Damage Inspection Report.
See Figure 2, Sheet 1 –
3.
(1) Provide the Damage Inspection Report to your local Engine Alliance field representative.
T a b l e 1 Examine Serviceable Limits Disposition All Locations for :
Cracks.
Any quantity .
Not Permitted.
At Hub Assembly Markings on cone arm.
Do a local FPI of the marking area.
Cracks are not permitted.
Burning or pitting.
All other locations, any quantity .
Not permitted.
Contact Engine Alliance.
Any quantity in areas without anti-gallant coating.
Do a local FPI of the blend area.
Cracks are not permitted.
Existing blends.
Any quantity in areas with anti-gallant coating.
1.
Remove anti-gallant over and adjacent to the blend area using EAC-0048-2 Abrasive Pad and EAC-0052 Acetone and then perform a visual inspection with 10x magnification.
Cracks are not permitted.
2.
Perform a local FPI of the blend area within 500 cycles, Cracks are not permitted (see Note).
N O T E :
Note:
the fan hub will have to be removed from the LPC and sent for overhaul to accomplish FPI.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 8 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
Examine Serviceable Limits Disposition In area K.
Permitted.
Mismatch.
Outside of area K.
Not permitted.
Contact Engine Alliance.
Antigallant layer Area “H” for chipped, missing, or not complete All quantities.
Permitted.
Antigallant layer Area “J” for chipped, missing, or not complete All quantities.
Not permitted.
Any damage
0.005 in.
(0.127 mm) deep or less.
Permitted.
Area 1 Fan Hub for:
Nicks, dents and scratches.
Any damage more than
0.005 in.
(0.127 mm) deep.
Not permitted.
Contact Engine Alliance.
Any damage
0.002 in.
(0.051 mm) deep or less .
Permitted.
Any damage more than
0.002 in.
(0.051 mm) deep up to
0.005 in.
(0.127 mm).
Do a local FPI of the damaged area (see Note).
Cracks are not permitted.
Local FPI inspection required every 200 cycles.
Note:
FPI cannot be performed over areas with anti-gallant coatings.
If damage is located in a coated area, contact Engine Alliance.
Area 2 Fan Hub for:
Nicks, dents and scratches.
Any damage more than
0.005 in.
(0.127 mm) deep.
Not permitted.
Contact Engine Alliance.
Area 3 Lug circle marks.
(Marks indicate blade slot position).
Permitted.
Any damage
0.010 in.
(0.254 mm) deep or less.
Permitted.
Area 8 Hub for:
Nicks, dents, and scratches.
Any damage more than
0.010 in.
(0.254 mm) deep.
Not permitted.
Contact Engine Alliance.
Any damage
0.001 in.
(0.0254 mm) deep or less.
Permitted.
Area 4 (24 locations) Areas to a maximum of
0.125 in.
(3.175 mm) around the clinch nut hole countersink diameter +/- 45 degrees from T op Dead Center (front side of the flange) for nicks, dents and scratches.
Any damage more than
0.001 in.
(0.025 mm) deep.
Not permitted.
Contact Engine Alliance.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 9 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.
Examine Serviceable Limits Disposition Any damage
0.001 in.
(0.025 mm) deep or less.
Permitted.
Any damage more than
0.001 in.
(0.025) deep up to
0.006 in.
(0.152 mm) deep.
Do a local FPI of the damaged area (see Note).
Cracks are not permitted.
Local FPI inspection required every 200 cycles.
Any damage more than
0.006 in.
(0.152 mm) deep up to
0.010 in.
(0.254 mm) deep.
Do a local FPI of the damaged area (see Note).
Cracks are not permitted.
Remove the fan hub from service within 20 cycles.
Area 5 (24 locations) Area to a maximum of
0.150 in.
(3.810 mm) around the scallop for nicks, dents and scratches (front and rear side of the flange and inner face).
More than
0.010 in.
(0.254 mm) deep.
Not permitted.
Contact Engine Alliance.
Any damage
0.001 in.
(0.025 mm) deep or less.
Permitted.
Area 6 (24 locations) Area around the blade slot face to a maximum of
0.200 in.
(5.08 mm) for nicks, dents, and scratches.
Any damage more than
0.001 in.
(0.025 mm) deep.
Not permitted.
Contact Engine Alliance.
Any damage
0.002 in.
(0.051 mm) deep or less.
Permitted.
Area 7 (24 locations) Areas to a maximum of
0.125 in.
(3.175 mm) around the clinch nut hole countersink diameter remaining 270 degrees not covered by zone 4 diameter (front side of the flange) for nicks, dents and scratches.
Any damage more than
0.002 in.
(0.051 mm) deep.
Not permitted.
Contact Engine Alliance.
Marking symbols on Fan Blade Lock Retaining Lug forward faces and balance flange tabs.
Any quantity .
Permitted.
Note:
Do a local FPI of the damaged areas by one of the methods that follow:
1.
Reference 4, AMM T ASK 70-51-00-910-802-A, Fluorescent Penetrant Inspection (Local Spot Application) (High or Ultra High Sensitivity).
Use EAC-0104 Ultra High Sensitivity penetrant.
2.
Reference 1, SPM EAP-3214:
Fluorescent Penetrant Inspection (Local Spot Application).
Use EAC-0104 Ultra High sensitivity penetrant.
l October 7/17 EAGP7-A72-383
REVISION NO.
1 - October 12/17 Page 10 ENGINE
ALLIANCE, LLC
PROPRIET AR Y
INFORMA TION Subject to the restrictions on the cover or first page.