Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '3d296a1b2002901fa9aca8e8b2a4a09f97b7d43b1f9606c6e84ad1d38a43bc15' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '3d296a1b2002901fa9aca8e8b2a4a09f97b7d43b1f9606c6e84ad1d38a43bc15' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Service Bulletin Fokker 70/100
Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 69 70 71 Revision 2 2 2 Apr 10/12 SBF100-53-118 Revision 2, Oct 16/12 Page 1
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
FUSELAGE Forward Fuselage - The One-Time External Inspection and Temporary Repair of the Butt Joints at Stringers 8, 37, 42 and 67 between Stations 3850 and 5305.
1. Planning Information A. Effectivity
(1) F28 Mark 0070/0100 aircraft serial numbers:
11268 thru 11283, 11286, 11289, 11291, 11293, 11295, 11300, 11303, 11306, 11308, 11310, 11312 thru 11314, 11316, 11318, 11321, 11323 thru 11335, 11337, 11338, 11340, 11345, 11346, 11349, 11352 thru 11361, 11365 thru 11370, 11372, 11373, 11376 thru 11380, 11387, 11388, 11391, 11392, 11395 thru 11399, 11403 thru 11408, 11411 thru 11419, 11425 thru 11428, 11432, 11435, 11436, 11438, 11439, 11444 thru 11450, 11456 thru 11460, 11464 thru 11469, 11475 thru 11479, 11481 thru 11506, 11509, 11511 and 11513 thru 11585. Unless modified in accordance with SBF100-53-119.
B. Concurrent Requirements
(1) Not applicable.
Service Bulletin Fokker 70/100
SBF100-53-118 Apr 10/12 Page 2 Revision 2, Oct 16/12
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
C. Reason
(1) A crack was reported at a butt joint on the forward fuselage above the passenger door. Investigation revealed that, depending on the configuration of the aircraft, four butt joints in the forward fuselage have a similar design and a repetitive inspection is required.
(2) The repetitive inspection has been incorporated into revision 10 of report SE-623 in the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness, tasks 531030-00-11 and 531031-00-05. The repetitive inspection accomplishment instructions have been incorporated in the Non Destructive Testing Manual (NDTM).
(3) This Service Bulletin provides the one-time inspection accomplishment instructions in parts 1 & 2.
(4) When crack indications are found the applicable butt joint has to be repaired before further flight. The temporary repair is available in this Service Bulletin parts 3, 4, 5 & 6.
Reason for Revision
(1) This revision is made to:
- Delete the requirements for the repetitive inspections from this Service Bulletin.
- Add reference for the repetitive inspections to the ALS (report SE-623) of the Instructions for Continued Airworthiness.
- Change step C.(3) of Part 2 and figure 4A for clarity.
D. Description
(1) This Service Bulletin is divided in 6 Parts as follows:
Part 1: The Manufacturing of the Calibration Plate for the Inspection.
This Part tells how to:
- Manufacture the calibration plate for the inspection according Part 2.
Part 2: The One-Time External Inspection of the Butt Joint at Stringer 8, 37, 42 and 67 between Stations 3850 and 5305 This Part tells how to:
- Carry out the external inspection of the butt joint at stringer 8, 37, 42 and 67 between Stations 3850 and 5305, using Low Frequency Eddy Current (LFEC).
NOTE: Frame bays that are temporary repaired do not require the repetitive inspection, refer to the ALS (report SE-623) of the Instructions for Continued Airworthiness.
Service Bulletin Fokker 70/100
Apr 10/12 SBF100-53-118 Revision 2, Oct 16/12 Page 3
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
Part 3: The Temporary Repair of the Butt Joint at Stringer 8.
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 4: The Temporary Repair of the Butt Joint at Stringer 37.
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 5: The Temporary Repair of the Butt Joint at Stringer 42.
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 6A: The Temporary Repair of the Butt Joint at Stringer 67 (Applicable to aircraft 11316 and 11318).
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 6B: The Temporary Repair of the Butt Joint at Stringer 67 (Applicable to aircraft 11268 thru 11275, 11277, 11279, 11293, 11321, 11323 thru 11330, 11332, 11335, 11359, 11361, 11367, 11378, 11387, 11388, 11396, 11397, 11404, 11432, 11438, 11439, 11444 thru 11446, 11450, 11456, 11460, 11468, 11475 thru 11477, 11483 thru 11490, 11492 thru 11497, 11499, 11500, 11502 thru 11505, 11509, 11511, 11513, 11515 thru 11520, 11522 thru 11527 and if POST- SBF100-23-028: 11370, 11376, 11377, 11405, 11407, 11411 thru 11419, 11425 thru 11427, 11435, 11436, 11449, 11457, 11458, 11464, 11465, 11467, 11469, 11479, 11481, 11482, 11506 and 11514).
Service Bulletin Fokker 70/100
SBF100-53-118 Apr 10/12 Page 4 Revision 2, Oct 16/12
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 6C: The Temporary Repair of the Butt Joint at Stringer 67 (Applicable to aircraft 11276, 11278, 11280 thru 11283, 11286, 11289, 11291, 11295, 11300, 11303, 11306, 11308, 11310, 11312 thru 11314, 11331, 11333, 11334, 11337, 11338, 11345, 11346, 11349, 11357, 11358, 11365, 11366, 11372, 11373, 11379, 11380, 11391, 11392, 11398, 11399).
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 6D: The Temporary Repair of the Butt Joint at Stringer 67 (Applicable to aircraft 11340, 11352 thru 11356, 11360, 11368, 11369, 11395, 11403, 11406, 11408, 11428, 11447, 11448, 11459, 11466, 11478, 11491, 11498, 11501 and if PRE - SBF100-23-028: 11370, 11376, 11377, 11405, 11407, 11411 thru 11419, 11425 thru 11427, 11435, 11436, 11449, 11457, 11458, 11464, 11465, 11467, 11469, 11479, 11481, 11482, 11506 and 11514).
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Part 6E: The Temporary Repair of the Butt Joint at Stringer 67(Applicable to aircraft 11521, 11528, 11529, 11532, 11536 thru 11541, 11543, 11545, 11547, 11549, 11551, 11553 thru 11583, 11585).
This Part tells how to:
- Get access on the inside of the repair area
- Remove the applicable fasteners
- Remove the cracked part of the butt-strap
- Install an insert for the removed part of the butt strap
- Install the external repair strap.
Service Bulletin Fokker 70/100
Apr 10/12 SBF100-53-118 Revision 2, Oct 16/12 Page 5
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
E. Compliance
(1) Recommended.
Fokker Services recommends the accomplishment of Part 2 of this Service Bulletin at the following times:
The inspection has to be carried out before the aircraft exceeds a total number of 35,000 flight cycles (FC) since new or within 8 months after the date of issue of this Service Bulletin, whichever comes later.
NOTE 1: An alternative inspection method is a Visual Detailed Inspection of the butt joint(s) from the inside. Only note that to gain access to the inspection area from the inside several components must be removed. After the inspection has been performed all components that are removed must be reinstalled and tested, all in accordance with the applicable AMM procedures.
NOTE 2: It is expected that EASA will issue an Airworthiness Directive (AD) with respect to this subject with the same compliance terms. Refer to the EASA website for the publication of the Airworthiness Directive.
NOTE 3: This Service Bulletin covers the interim actions required to assure continued airworthiness. When the temporary repair has been performed on one or more frame bays, these frame bays no longer require the repetitive inspection as incorporated in the ALS (report SE-623) of the Instructions for Continued Airworthiness. The mandatory terminating repair/modification is presented in SBF100-53-119 (issued June 2012) and has a compliance before the aircraft will have accumulated 50,000 FC since new.
F. Approval
(1) The technical content of this document is approved under the authority of DOA nr.
EASA.21J.059.
G. Manpower
(1) Approximately 2 man-hours are necessary to manufacture the special inspection calibration tool according Part 1 of this Service Bulletin.
This table of manpower will help you to schedule and do this Part:
Instructions Men Man-hours Elapsed time (hours) Manufacturing 1 2,0 2,0 Total 2,0 2,0 NOTE: This estimate does not include the time necessary for the sealant to cure.
Service Bulletin Fokker 70/100
SBF100-53-118 Apr 10/12 Page 6 Revision 2, Oct 16/12
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
(2) Approximately 1 man-hour is necessary to do Part 2 of this Service Bulletin on one aircraft.
This table of manpower will help you to schedule and do this Part:
Instructions Men Man-hours Elapsed time (hours) Removal - - - Modification Inspection 1 1,0 1,0 Installation - - - Testing - - - Total 1,0 1,0
(3) Approximately 30 man-hours are necessary to do Part 3 of this Service Bulletin on one aircraft.
This table of manpower will help you to schedule and do this Part:
Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.
(4) Approximately 30 man-hours are necessary to do Part 4 of this Service Bulletin on one aircraft.
This table of manpower will help you to schedule and do this Part:
Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.
Service Bulletin Fokker 70/100
Apr 10/12 SBF100-53-118 Revision 2, Oct 16/12 Page 7
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
(5) Approximately 30 man-hours are necessary to do Part 5 of this Service Bulletin on one aircraft.
This table of manpower will help you to schedule and do this Part:
Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.
(6) Approximately 30 man-hours are necessary to do Part 6A thru 6E of this Service Bulletin on one aircraft.
This table of manpower will help you to schedule and do this Part:
Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.
(7) The estimated hours are for direct labor done by experienced personnel. They are calculated based on the conditions given in SBF100-00-001 (Service Bulletin Introduction, section 2.C., "Manpower").
H. Weight and Balance
(1) Part 3 thru 6E :
(a) Repair accomplished on one stringer (8, 37, 42 or 67) between sta 3850-4175:
1 Weight change: + 0,076 kg (0.168 lb), per butt joint repair.
Index change: Mark 0100: - 0.010 Mark 0070: - 0.008.
Service Bulletin Fokker 70/100
SBF100-53-118 Apr 10/12 Page 8 Revision 2, Oct 16/12
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
(b) Repair accomplished on one stringer (8, 37, 42 or 67) between sta 4610-4850:
1 Weight change: + 0,074 kg (0.164 lb), per butt joint repair.
Index change: Mark 0100: - 0.009 Mark 0070: - 0.008.
I. Electrical Load Data
(1) Not changed.
J. Software Accomplishment Summary
(1) Not applicable.
K. References
(1) Fokker 70/100 Airworthiness Limitations Section (ALS) Fokker 70/100 Structural Repair Manual (SRM) Fokker 70/100 Aircraft Maintenance Manual (AMM) Fokker 70/100 Illustrated Parts Catalog (IPC) Fokker 70/100 Maintenance Review Board (MRB) document Fokker 70/100 Standards and Process Manual (SPM) Fokker 70/100 Maintenance Planning Document (MPD) Fokker 70/100 Service Bulletin:
- SBF100-53-091
- SBF100-53-105
- SBF100-53-119 Fokker Consumable Material List (CML) Fokker internal reference(s):
- ECR015819.
L. Publications Affected
(1) This SB affects the publications listed below:
(a) Maintenance Documentation
Not affected.
(b) Maintenance Programs
- Fokker 70/100 Maintenance Planning Document (MPD)
- Fokker 70/100 Airworthiness Limitations Section (ALS)
Service Bulletin Fokker 70/100
Apr 10/12 SBF100-53-118 Revision 2, Oct 16/12 Page 9
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
(c) Special Instructions for Continued Airworthiness (ICA)
The effect of this Service Bulletin on the special ICA is as follows:
YES NO
- Electrical Wiring Interconnection System (EWIS) - X
- Fuel Tank Safety (FTS) - X
- Damage Tolerance of Fatigue Critical Structure X -
- Certification Maintenance Requirements (CMR) - X NOTE: If “YES”, when not already incorporated, the changed ICA will be incorporated in the MRB, the Airworthiness Limitations Sections (ALS) and/or AMM document(s) within one calendar year from the date of issue of this Service Bulletin. Until then, no actions are required.
(d) Operational Documentation
Not affected.
(2) Report to Fokker Services that this SB has been carried out on the applicable aircraft.
Send to Fokker Services the “Reporting Quality Form” of this SB. Refer to the last page of this SB.
(3) For incorporation of this Service Bulletin in your documentation refer to SBF100-00-001 (Service Bulletin Introduction, section 4 "Incorporation of Service Bulletins in Documentation of Fokker Services").
M. Interchangeability or Intermixability of Parts
(1) Not applicable.
Service Bulletin Fokker 70/100
SBF100-53-118 Apr 10/12 Page 10 Revision 2, Oct 16/12
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
2. Material Information A. Material – Price and Availability
(1) The materials are local source items.
B. Material Required
(1) These parts, which are necessary to complete Part 1 and/or Part 3 thru 6E of this Service Bulletin on 1 aircraft, are not part of the mod kit.
New Part Number Qty Keyword Info Old Part Instructions/ * 1 *2 Number Disposition Alodine1201 - AR* Coating Fk13-003D** - Local source Corrosion resistant steel strip
- AR* Strip ~20 x 50 mm t=0,4 mm
- Local source HL11VF5-xx - AR* CSK hilok - - Local source HL11VF6-xx - AR* CSK hilok - - Local source HL111VF6-xx - AR* CSK hilok - - Local source HL70-5 - AR* CSK collar - - Local source HL70-6 - AR* CSK collar - - Local source HL79-6 - AR* CSK collar - - Local source F0N1-4311-1AK- *3 AR* - Sheet, aluminum 2024T3 Alclad - Local source F0N1-4311-1AL- * 4 AR* - Sheet, aluminum 2024T3 Alclad - Local source F0N1-4311-1AM- *5 - AR* Sheet, aluminum 2024T3 Alclad - Local source F0N18-9151S04 - AR* CSK repair washer - - Local source F0N18-9151S05 - AR* CSK repair washer - - Local source F0N18-9151S06 - AR* CSK repair washer - - Local source F0N18-9152-02 - AR* CSK repair washer - - Local source F0N18-9152-03 - AR* CSK repair washer - - Local source NAS1097DD4-XX - AR* CSK rivet - - Local source NAS1097DD5-XX - AR* CSK rivet - - Local source NAS1097DD6-XX - AR* CSK rivet - - Local source PR1436GA1-2 AR* AR* Sealant Fk09-016** - Local source PR1436GB1-2 - AR* Sealant Fk09-017** - Local source S15-60CRME52700 - AR* Aerodur Primer Fk07-008** - Local source NOTES: * Use as much as necessary ** Refer to the CML for material numbers *1 Applicable to Part 1 *2 Applicable to Part 3 thru 6E *3 1,0 mm (0.040 inch) 2024T3 Alclad aluminum sheet *4 1,2 mm (0.050 inch) 2024T3 Alclad aluminum sheet *5 1,4 mm (0.055 inch) 2024T3 Alclad aluminum sheet.
(2) These mod kit parts are necessary to do this Service Bulletin on 1 aircraft.
(a) Not applicable.
Service Bulletin Fokker 70/100
Apr 10/12 SBF100-53-118 Revision 2, Oct 16/12 Page 11
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
C. Tooling – Price and Availability
(1) The following special tools are required to accomplish Part 2 of this Service Bulletin:
Part Number
Specification Reference Supplier ELOTEST-B1SB Phase analysis EC tester S0137* Rohmann SPT4039 Sliding probe, reflection type, 1-100 kHz
- Servicing Europe NDT CR-RE-TF180 Interconnecting cable - Servicing Europe NDT SB10053118PLATE Calibration plate - Local source** NOTES: * Reference number when ordering at Fokker services BV.
** Calibration plate pn SB10053118PLATE has to be manufactured in accordance with Part 1 of this Service Bulletin.
NOTE: Any other equipment may be used, provided that the specifications in the table and the sensitivity requirements as specified in step C. of Part 2 are met.
Calibration procedures may vary when using other equipment.
D. Drawings Required
(1) Not applicable.
Service Bulletin Fokker 70/100
SBF100-53-118 Apr 10/12 Page 12 Revision 2, Oct 16/12
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.
3. Accomplishment Instructions
General:
- For CML material number references, refer to “Myfokkerfleet.com/Documentation/CML” or AMM task 20-30-00-910-xxx-A (Consumable Material List).
- For Standards and Process Manual (SPM) references, refer to “Myfokkerfleet.com/Documentation/SPM”.
- For the application of Alodine 1201 (Fk13-003D), refer to the AMM, chapter 51-22-00.
- For the application of primer and paint, refer to the AMM, chapter 51-21-00.
- For the application of sealant PR1436GA1-2 (Fk09-016) and PR1436G-B1-2 (Fk09-017) refer to the AMM, chapter 51-23-00.
- For the removal/installation of solid rivets, refer to the SRM, chapter 51-40-02.
- For the installation of hiloks, refer to the SRM chapters 51-41-01.
- For drilling and dimpling procedures, refer to the SRM, chapter 51-21-02.
- For drilling and countersinking procedures, refer to the SRM, chapter 51-22-01.
- For machining procedures, refer to the SRM chapter 51-22-02.
WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY
THE INSTRUCTIONS AND MANUFACTURER'S HEALTH AND SAFETY INSTRUCTIONS.
Part 1: The Manufacturing of the Calibration Plate for the Inspection Refer to figure 1.
A. Manufacturing of the calibration plate.
(1) Manufacture 2 plates A in accordance with figure 1 “Plate A”. Use:
- AR Sheet, aluminum pn F0N1-4311-1AK- * NOTE: * 1,0 mm (0.040 inch) thick 2024T3 Alclad aluminium sheet.
(2) Manufacture 1 x plate B in accordance with figure 1 “Plate B”. Use:
- AR Sheet, aluminum pn F0N1-4311-1AL- * NOTE: * 1,2 mm (0.050 inch) thick 2024T3 Alclad aluminium sheet.
(a) Make a small hole with a Ø 1,0 mm drill in plate B on the indicated position.
(b) Make a 10 mm long saw cut of 0,2 (± 0,1) mm wide with a fretsaw or hacksaw.
B. Assembly of the special tool.
(1) Assemble the special tool in accordance with figure 1 and use the plates manufactured in step A.(1) and A.(2). Use:
- AR Sealant, interfaying PR1436GA1-2* Fk09-016 NOTE: * Or equivalent