Copy · U.S. DOT/FAA - SBF100-53-119-R2 · 68 pages

© Fokker. Filed by the FAA in regulations.gov docket FAA-2013-0865; AD 2014-07-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '64efb6e41fddc766f346dc2856131c363a01ab16071d2fa0e0a8a460ff917bf4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Service Bulletin Fokker 70/100

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 Revision 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 June 20/12 SBF100-53-119 Revision 2, May 08/13 Page 1

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

FUSELAGE Forward Fuselage - The Terminating Repair/Modification of the Forward Fuselage Butt-joints at Stringer 8, 37, 42 and 67 between Fuselage Stations 3850-5305.

1. Planning Information A. Effectivity

(1) F28 Mark 0070/0100 aircraft serial numbers:

11268 thru 11283, 11286, 11289, 11291, 11293, 11295, 11300, 11303, 11306, 11308, 11310, 11312 thru 11314, 11316, 11318, 11321, 11323 thru 11335, 11337, 11338, 11340, 11345, 11346, 11349, 11352 thru 11361, 11365 thru 11370, 11372, 11373, 11376 thru 11380, 11387, 11388, 11391, 11392, 11395 thru 11399, 11403 thru 11408, 11411 thru 11419, 11425 thru 11428, 11432, 11435, 11436, 11438, 11439, 11444 thru 11450, 11456 thru 11460, 11464 thru 11469, 11475 thru 11479, 11481 thru 11506, 11509, 11511 and 11513 thru 11585.

B. Concurrent Requirements

(1) Not applicable.

Service Bulletin Fokker 70/100

SBF100-53-119 June 20/12 Page 2 Revision 2, May 08/13

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

C. Reason

(1) A crack was reported at a butt joint on the forward fuselage above the passenger door. Investigation revealed that, depending on the configuration of the aircraft, four butt joints in the forward fuselage have a similar design and a repetitive inspection is required.

(2) Service Bulletin SBF100-53-118 introduced a repetitive inspection (and, if applicable, a temporary repair) on the butt joints at stringers 8, 37, 42 and 67 between fuselage stations 3850-5305. The repetitive inspections in that bulletin have subsequently been overruled by an inspection task in the Airworthiness Limitation Section (ALS) report SE-623 (task numbers 531030-00-11 and 531031-00-05) of the Instructions for Continued Airworthiness (ICA).

(3) If you have found a crack (or cracks) dur ing accomplishment of Service Bulletin SBF100-53-118, the aircraft needs to be repaired before further flight with a temporary repair according to SBF100-53-118 or with a terminating repair by Part 1 and/or Part 2, 3, 4A, 4B, 4C, 4D or 4E of this bulletin (SBF100-53-119).

(4) Repetitive inspections are no longer applicable on aircraft where the terminating repair has been accomplished on all four butt joints.

(5) This Service Bulletin can also be accomplished as a modification (also for aircraft for which the inspections are not yet due) to avoid any inspections.

Reason for Revision 1:

(1) This revision is made to:

- Add the removal and installation instructions for the ATC #1 top antenna, the GPS antennas (if installed) and for the Galley area light.

Reason for Revision 2:

(1) This revision is made to:

- Incorporate (optional) mod-kits upon request op customers/operators.

- Clarify what to do with existing bonding rivet (hole)s. These are to be picked up by new solid rivets.

- Mention the applicable Airworthiness Directive (AD) and new Airworthiness Limitation Section (ALS) Task numbers with respect to this subject.

D. Description

(1) This service bulletin is divided in 4 parts as follows:

Part 1: The Terminating Repair of the Butt Joint at Stringer 8 between Fuselage Stations 3850 and 5305.

NOTE: This Part has a different repair area when the repair/modification described in the Service Bulletins SBF100-53-091 or SBF100-53-105 is accomplished, see Figure 6.

Service Bulletin Fokker 70/100

June 20/12 SBF100-53-119 Revision 2, May 08/13 Page 3

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Part 2: The Terminating Repair of the Butt Joint at Stringer 37 between Fuselage Stations 3850 and 5305.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Part 3: The Terminating Repair of the Butt Joint at Stringer 42 between Fuselage Stations 3850 and 5305.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Part 4A: The Terminating Repair of the Butt Joint at Stringer 67 between Fuselage Stations 3850 and 5305 ((Applicable to aircraft 11316 and 11318).

NOTE: This Part has a different repair area when the repair/modification described in the Service Bulletins SBF100-53-091 or SBF100-53-105 is accomplished, see Figure 9.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Service Bulletin Fokker 70/100

SBF100-53-119 June 20/12 Page 4 Revision 2, May 08/13

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Part 4B: The Terminating Repair of the Butt Joint at Stringer 67 between Fuselage Stations 3850 and 5305 (Applicable to aircraft 11268 thru 11275, 11277, 11279, 11293, 11321, 11323 thru 11330, 11332, 11335, 11359, 11361, 11367, 11378, 11387, 11388, 11396, 11397, 11404, 11432, 11438, 11439, 11444 thru 11446, 11450, 11456, 11460, 11468, 11475 thru 11477, 11483 thru 11490, 11492 thru 11497, 11499, 11500, 11502 thru 11505, 11509, 11511, 11513, 11515 thru 11520, 11522 thru 11527 and if POST- SBF100-23-028: 11370, 11376, 11377, 11405, 11407, 11411 thru 11419, 11425 thru 11427, 11435, 11436, 11449, 11457, 11458, 11464, 11465, 11467, 11469, 11479, 11481, 11482, 11506 and 11514).

NOTE: This Part has a different repair area when the repair/modification described in the Service Bulletins SBF100-53-091 or SBF100-53-105 is accomplished, see Figure 9.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Part 4C: The Terminating Repair of the Butt Joint at Stringer 67 between Fuselage Stations 3850 and 5305 (Applicable to aircraft 11276, 11278, 11280 thru 11283, 11286, 11289, 11291, 11295, 11300, 11303, 11306, 11308, 11310, 11312 thru 11314, 11331, 11333, 11334, 11337, 11338, 11345, 11346, 11349, 11357, 11358, 11365, 11366, 11372, 11373, 11379, 11380, 11391, 11392, 11398, 11399).

NOTE: This Part has a different repair area when the repair/modification described in the Service Bulletins SBF100-53-091 or SBF100-53-105 is accomplished, see Figure 9.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Part 4D: The Terminating Repair of the Butt Joint at Stringer 67 between Fuselage Stations 3850 and 5305 (Applicable to aircraft 11340, 11352 thru 11356, 11360, 11368, 11369, 11395, 11403, 11406, 11408, 11428, 11447, 11448, 11459, 11466, 11478, 11491, 11498, 11501 and if PRE - SBF100-23-028: 11370, 11376, 11377, 11405, 11407, 11411 thru 11419, 11425 thru 11427, 11435, 11436, 11449, 11457, 11458, 11464, 11465, 11467, 11469, 11479, 11481, 11482, 11506 and 11514).

Service Bulletin Fokker 70/100

June 20/12 SBF100-53-119 Revision 2, May 08/13 Page 5

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

NOTE: This Part has a different repair area when the repair/modification described in the Service Bulletins SBF100-53-091 or SBF100-53-105 is accomplished, see Figure 9.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

Part 4E: The Terminating Repair of the Butt Joint at Stringer 67 between Fuselage Stations 3850 and 5305 (Applicable to aircraft 11521, 11528, 11529, 11532, 11536 thru 11541, 11543, 11545, 11547, 11549, 11551, 11553 thru 11583, 11585).

NOTE: This Part has a different repair area when the repair/modification described in the Service Bulletins SBF100-53-091 or SBF100-53-105 is accomplished, see Figure 9.

This Part tells how to:

- Get access on the inside of the repair area

- Remove the applicable fasteners

- Remove the temporary repair per SBF100-53-118, if applicable

- Inspect, and remove the cracked part of the butt-strap if applicable

- Install an insert for the removed part of the butt strap, if applicable

- Install the external repair strap.

E. Compliance

(1) Recommended.

Fokker Services recommends the accomplishment of this Service Bulletin before the aircraft will have accumulated 50,000 FC since new or within 8 months after the date of initial issue of this Service Bulletin (June 20, 2012), whichever comes last.

NOTE: EASA has issued an Airworthiness Directive (AD) 2012-0218 with respect to this subject with the same compliance terms.

F. Approval

(1) The technical content of this document is approved under the authority of DOA nr.

EASA.21J.059.

G. Manpower

(1) Approximately 30 man-hours are necessary to do Part 1 of this Service Bulletin on one aircraft.

Service Bulletin Fokker 70/100

SBF100-53-119 June 20/12 Page 6 Revision 2, May 08/13

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

This table of manpower will help you to schedule and do this Part:

Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.

(2) Approximately 34 man-hours are necessary to do Part 2 of this Service Bulletin on one aircraft.

This table of manpower will help you to schedule and do this Part:

Instructions Men Man-hours Elapsed time (hours) Removal 1 9,0 9,0 Modification Inspection 2 12,0 6,0 Installation 1 6,0 6,0 Testing 1 7,0 7,0 Total 34,0 28,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.

(3) Approximately 30 man-hours are necessary to do Part 3 of this Service Bulletin on one aircraft.

This table of manpower will help you to schedule and do this Part:

Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.

(4) Approximately 30 man-hours are necessary to do Part 4A thru 4E of this Service Bulletin on one aircraft.

Service Bulletin Fokker 70/100

June 20/12 SBF100-53-119 Revision 2, May 08/13 Page 7

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

This table of manpower will help you to schedule and do this Part:

Instructions Men Man-hours Elapsed time (hours) Removal 1 8,0 8,0 Modification Inspection 2 12,0 6,0 Installation 1 5,0 5,0 Testing 1 5,0 5,0 Total 30,0 24,0 NOTE 1: This estimate does not include the time necessary for the paint to dry and/or the sealant to cure.

(5) The estimated hours are for direct labor done by experienced personnel. They are calculated based on the conditions given in SBF100-00-001 (Service Bulletin Introduction, section 2.C., "Manpower").

H. Weight and Balance

(1) Part 1 :

(a) Repair at stringer 8 accomplished between fuselage stations 3850-5305:

Weight change: + 1,0796 kg (2.380 lb) Index change: Mark 0100: - 0.138 Mark 0070: - 0.111.

(b) Repair at stringer 8 accomplished between fuselage stations 4410-5305, in case SBF100-53-091 is accomplished (shorter repair strap):

Weight change: + 0,6763 kg (1.491 lb) Index change: Mark 0100: - 0.084 Mark 0070: - 0.068.

(c) Repair at stringer 8 accomplished between fuselage stations 4830-5305, in case SBF100-53-105 is accomplished (shorter repair strap):

Weight change: + 0,3506 kg (0.773 lb) Index change: Mark 0100: - 0.043 Mark 0070: - 0.034.

(2) Part 2 :

(a) Repair at stringer 37 accomplished between fuselage stations 3850-5305:

Weight change: + 1,0907 kg (2.405 lb) Index change: Mark 0100: - 0.139 Mark 0070: - 0.112.

Service Bulletin Fokker 70/100

SBF100-53-119 June 20/12 Page 8 Revision 2, May 08/13

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

(3) Part 3 :

(a) Repair at stringer 42 accomplished between fuselage stations 3850-5305:

Weight change: + 1,0796 kg (2.380 lb) Index change: Mark 0100: - 0.138 Mark 0070: - 0.111.

(4) Part 4A thru 4E :

(a) Repair at stringer 67 accomplished between fuselage stations 3850-5305:

Weight change: + 1,0796 kg (2.380 lb) Index change: Mark 0100: - 0.138 Mark 0070: - 0.111.

(b) Repair at stringer 67 accomplished between fuselage stations 4410-5305, in case SBF100-53-091 is accomplished (shorter repair strap):

Weight change: + 0,6763 kg (1.491 lb) Index change: Mark 0100: - 0.084 Mark 0070: - 0.068.

(c) Repair at stringer 67 accomplished between fuselage stations 4830-5305, in case SBF100-53-105 is accomplished (shorter repair strap):

Weight change: + 0,3506 kg (0.773 lb) Index change: Mark 0100: - 0.043 Mark 0070: - 0.034.

I. Electrical Load Data

(1) Not changed.

J. Software Accomplishment Summary

(1) Not applicable.

K. References

(1) Fokker 70/100 Aircraft Maintenance Manual (AMM) Fokker 70/100 Structural Repair Manual (SRM) Fokker 70/100 Illustrated Parts Catalog (IPC) Fokker 70/100 Standards and Process Manual (SPM) Fokker 70/100 Service Bulletin (SB):

- SBF100-53-091

- SBF100-53-105

- SBF100-53-118.

Fokker Consumable Material List (CML) Fokker internal reference(s):

- ECR015861.

Service Bulletin Fokker 70/100

June 20/12 SBF100-53-119 Revision 2, May 08/13 Page 9

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

L. Publications Affected

(1) This SB affects the publications listed below:

(a) Maintenance Documentation

Not affected.

(b) Maintenance Programs

- Fokker 70/100 Maintenance Planning Document (MPD)

- Fokker 70/100 Airworthiness Limitations Section (ALS)

(c) Special Instructions for Continued Airworthiness (ICA)

The effect of this Service Bulletin on the special ICA is as follows:

YES NO

- Electrical Wiring Interconnection System (EWIS) - X

- Fuel Tank Safety (FTS) - X

- Damage Tolerance of Fatigue Critical Structure X -

- Certification Maintenance Requirements - X NOTE: If “YES”, when not already incorporated, the changed ICA will be incorporated in the MRB, the Airworthiness Limitations Section (ALS) and/or the AMM document(s) within one calendar year from the date of issue of this Service Bulletin. Until then, no actions are required.

(d) Operational Documentation

Not affected.

(2) Report to Fokker Services that this SB has been carried out on the applicable aircraft.

Send to Fokker Services the “Reporting Quality Form” of this SB, see last SB page.

NOTE: Completion of this form is not a formal part of accomplishment of the Service Bulletin itself and hence not a requirement.

(3) For incorporation of this Service Bulletin in your documentation refer to SBF100-00-001 (Service Bulletin Introduction, section 4 "Incorporation of Service Bulletins in Documentation of Fokker Services").

M. Interchangeability or Intermixability of Parts

(1) Not applicable.

Service Bulletin Fokker 70/100

SBF100-53-119 June 20/12 Page 10 Revision 2, May 08/13

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

2. Material Information A. Material – Price and Availability

(1) The materials are local source items.

(2) You can order the necessary parts as mod kit SB10053119-XU-A.

B. Material Required

(1) These parts, which are necessary to complete Part 1 thru 4E of this Service Bulletin on 1 aircraft, are not part of the mod kit.

New Part Number Qty Keyword Info Old Part Instructions/

AR* AR* - AR* AR* - AR* - - AR* - - AR* AR* AR* AR* AR* AR* AR* AR* AR* AR* AR* AR* AR* AR* AR* Number Disposition

- Lint-free cloth Fk05-044** - Local source Methyl Ethyl Ketone (MEK)*** Cleaning solvent Fk11-003 - Local source Alodine1201 Coating Fk13-003D** - Local source Corrosion resistant steel strip.

(or stainless steel) ~20 x 50 mm.

t = ~ 0,4 mm.

- Local source F0N1-4311-1AL- Sheet, aluminum,

2024T3 Alclad t = 1,2 mm

(0.050 inch).

- Local source F0N1-4311-1AM- Sheet, aluminum, ~220 x 1500 mm.

2024T3 Alclad t = 1,4 mm

(0.055 inch).

- Local source NAS1097AD5-xx CSK rivet or F0N2-6325AD5 - Local source NAS1097DD6-xx CSK rivet or F0N2-6328S5 - Local source HL11VF5-xx CSK hilok F0N2-1197-5 - Local source HL11VF6-xx CSK hilok F0N2-1197-6 - Local source HL111VF6-xx CSK oversize hilok F0N18-1220-6 - Local source HL70-5 hilok collar F0N2-1181-5 - Local source HL70-6 hilok collar F0N2-1181-6 - Local source HL79-6 hilok collar F0N18-2230-6 - Local source F0N18-9151S05 CSK repair washer or rivet heads - Local source F0N18-9151S06 CSK repair washer or rivet heads - Local source F0N18-9152-02 CSK repair washer - - Local source F0N18-9152-03 CSK repair washer - - Local source PR1436GA1-2**** Sealant Fk09-016**/**** - Local source PR1436GB1-2**** Sealant Fk09-017**/**** - Local source S15-60 Aerodur Aerodur Primer Fk07-008**/*** - Local source NOTES: * Use as much as necessary ** Refer to the CML for material numbers *** Or equivalent **** Is replaced by new Sealant type per TH5.978.

Service Bulletin Fokker 70/100

June 20/12 SBF100-53-119 Revision 2, May 08/13 Page 11

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

(2) These local source items are still necessary when a mod kit is ordered.

New Part Number Qty Keyword Info Old Part Instructions/

AR* AR*

AR* AR* AR* AR* Number Disposition

- Lint-free cloth Fk05-044** - Local source Methyl Ethyl Ketone (MEK)*** Cleaning solvent Fk11-003 - Local source Alodine1201 Coating Fk13-003D** - Local source PR1436GA1-2*** Sealant Fk09-016**/*** - Local source PR1436GB1-2*** Sealant Fk09-017**/*** - Local source S15-60 Aerodur Aerodur Primer Fk07-008**/*** - Local source NOTES: * Use as much as necessary ** Refer to the CML for material numbers *** Or equivalent.

(3) These mod kit parts are necessary to do this Service Bulletin on 1 aircraft.

New Part Number Qty Keyword Info Old Part Instructions/ Numbe r Disposition W21000-009 1 Corrosion resistant steel strip.

20 x 50 mm.

t = 0,4 mm.

- - W21000-011 4 External repair strap. 220 x 1500 mm. - - W21000-013 10 Shims. 20 x 20, 0.8 mm. - - W21000-015 10 Shims. 20 x 20, 1.2 mm. - - W21000-017 10 Shims. 20 x 20, 1.4 mm. - - W21000-019 4 Insert. 45 x 460 mm. - - NAS1097AD5-6 2100* CSK rivet or F0N2-6328S5 - - NAS1097AD5-10 200* CSK rivet or F0N2-6328S5 - - NAS1097DD6-10 14* CSK rivet or F0N2-6328S6 - - HL11VF5-6 20 CSK hilok F0N2-1197-5-6 - - HL11VF5-7 20 CSK hilok F0N2-1197-5-7 - - HL11VF6-3 15 CSK hilok F0N2-1197-6-3 - - HL11VF6-4 15 CSK hilok F0N2-1197-6-4 - - HL11VF6-5 55 CSK hilok F0N2-1197-6-5 - - HL11VF6-6 45 CSK hilok F0N2-1197-6-6 - - HL11VF6-7 45 CSK hilok F0N2-1197-6-7 - - HL11VF6-8 5 CSK hilok F0N2-1197-6-8 - - HL111VF6-3 5 CSK oversize hilok F0N18-1220-6-3 - - HL111VF6-4 5 CSK oversize hilok F0N18-1220-6-4 - - HL111VF6-5 15 CSK oversize hilok F0N18-1220-6-5 - - HL111VF6-6 10 CSK oversize hilok F0N18-1220-6-6 - - HL111VF6-7 10 CSK oversize hilok F0N18-1220-6-7 - - HL70-5 40 hilok collar F0N2-1181-5 - - HL70-6 180 hilok collar F0N2-1181-6 - - HL79-6 45 hilok collar F0N18-2230-6 - - F0N18-9151S04 850 CSK repair washer - - -

Service Bulletin Fokker 70/100

SBF100-53-119 June 20/12 Page 12 Revision 2, May 08/13

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

F0N18-9151S05 410 CSK repair washer - - - F0N18-9151S06 10 CSK repair washer - - - F0N18-9152-02 16 CSK repair washer - - - F0N18-9152-03 48 CSK repair washer - - - NOTES:* Or longer rivet length (must be cut to proper length).

C. Tooling – Price and Availability

(1) Not applicable.

D. Drawings Required

(1) Not applicable.

Pages 13–24 of 68