Copy · FAA-2016-7271_SBF100-57-050_R1 · 64 pages

© Fokker. Filed by the FAA in regulations.gov docket FAA-2016-7271; AD 2016-24-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '0dad8d46f03a1680ccff508e7dbdbc061ef577d13f9abe3c89d497462659da3b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Service Bulletin Fokker Services B.V.

Prepared Function / Note Date poutsma-sp49839 May 12/15 Colleague Check doesburg-jd01812 May 12/15 Manager Final Approval aroon.siriphant May 19/15 Office of Airworthiness Approval visser-hv01800 May 19/15 Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

EASA approved procedure for electronic sign-off F100/70 Generic SB SBF100-57-050 Revision 1

WINGS - OUTER WING The Repair of Corroded Outer Wing Rear Spar Lower Girders between WSTA 8200 and 12375

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 1 of 30

1. General Information A. General

(1) Not applicable.

B. Table of Contents

• Section 1: General Information

• Section 2: Planning Information

• Section 3: Material Information

• Section 4: Accomplishment Instructions

• Service Bulletin Quality Reporting Form and attachments (if applicable):

• List of drawings/parts lists

• Parts List Local source (PLL)

• Parts List Supply (PLS)

• Required drawings C. Service Bulletin Revision History

Revision Date (Mmm dd/yy) Reason for Revision

- Apr 23/15 First Release 1 Refer to footer To add Manpower Information

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 2 of 30

2. Planning Information A. Effectivity

(1) F28 Mark 0070/0100 aircraft serial numbers:

11244 thru 11585.

B. Concurrent Requirements

(1) Not applicable.

C. Reason

(1) This Service Bulletin provides a repair of the LH and RH rear spar lower girder between WSTA 8200 and 12375. This repair can be used in case corrosion was found in this area during the one-time inspection of Service Bulletin SBF100-57-049.

(2) The repair of the lower girder is accomplished by replacing (parts of) the lower girder. The lower girder from WSTA 8550 to 10000 (Part 1 of this SB) and from WSTA 10000 to 12200 (Part 2 of this SB) will be replaced by two replacement lower girders and connected with splice repair angles to the remaining lower girder. For an overview of the repair area and replacing parts see figure 1.

(3) The repair in this Service Bulletin is a permanent repair, but does not cancel the repetitive inspections in this area.

(4) The lower girder splice angles as described in this Service Bulletin can optionally be placed at other locations (between WSTA 8200 and 12375) as necessary when the lower girder only needs to be replaced or repaired in a smaller area. Contact Fokker Services for deviating case-by-case repair procedures.

(5) In case existing repairs are present in the repair area of this Service Bulletin contact Fokker Services to review whether the repair in accordance with this Service Bulletin can be performed or that changes need to be made.

D. Description

(1) This Service Bulletin is divided in two Parts as follows:

Part 1: The Repair of the Corroded Outer Wing Rear Spar Lower Girder between WSTA 8550 and 10000.

- Prepare the aircraft

- Get access to the repair area

- Repair the rear spar lower girder

- Installation of trailing edge parts

- Sealing and coating of the fuel tank

- Sealing and painting of aft side of rear spar and wing trailing edge

- Installation of aileron system

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 3 of 30

- Installation of access panels Part 2: The Repair of the Corroded Outer Wing Rear Spar Lower Girder between WSTA 10000 and 12200.

- Prepare the aircraft

- Get access to the repair area

- Repair the rear spar lower girder

- Installation of trailing edge parts

- Sealing and coating of the fuel tank

- Sealing and painting of aft side of rear spar and wing trailing edge

- Installation of the aileron

- Installation of access panels E. Compliance

(1) Optional F. Approval

(1) The technical content of this document is approved under the authority of DOA ref.

EASA.21J.059.

G. Manpower

(1) Approximately 334 man-hours are necessary to do Part 1 of this Service Bulletin on one wing of one aircraft.

This table of manpower will help you to schedule and do this Service Bulletin:

Elapsed time (hours) Remov al 2 48.0 24.0 Modification Inspection Installation 2 60.0 30.0 Testing 2 6.0 3.0 Total 334.0 167.0

110.0 Instructions Men Man-hours 22 2 0 . 0

NOTE: This estimate does not include the time necessary to put the aircraft on jacks and for the paint to dry and/or the sealant to cure.

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 4 of 30

(2) Approximately 372 man-hours are necessary to do Part 2 of this Service Bulletin on one wing of one aircraft.

This table of manpower will help you to schedule and do this Service Bulletin:

Elapsed time (hours) Remov al 2 36.0 18.0 Modification Inspection Installation 2 50.0 25.0 Testing 2 6.0 3.0 Total 372.0 186.0

140.0 Instructions Men Man-hours 22 8 0 . 0

NOTE: This estimate does not include the time necessary to put the aircraft on jacks and for the paint to dry and/or the sealant to cure.

(3) The estimated hours are for direct labor done by experienced personnel. They are calculated based on the conditions given in SBF100-00-001 (Service Bulletin Introduction, section 2.C., “Manpower”).

H. Weight and Balance

(1) Weight change: None.

Index change: None.

I. Electrical Load Data

(1) Direct Current (DC) Loads:

(a) Not changed.

(2) Alternating Current (AC) Loads:

(a) Not changed.

J. Software Accomplishment Summary

(1) Not applicable.

K. References

(1) Fokker 70/100 Aircraft Maintenance Manual (AMM) Fokker 70/100 Structural Repair Manual (SRM) Fokker Consumable Material List (CML) Fokker Standards & Process Manual (SPM) Fokker 70/100 Service Bulletin (SB):

- SBF100-57-049

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 5 of 30

Fokker drawing(s): refer to “List of drawings/parts lists” Fokker internal reference:

- ECR016178.

L. Publications Affected

(1) This Service Bulletin affects the publications listed below:

(a) Maintenance Documentation

- Fokker 70/100 Structural Repair Manual (SRM) - chapter 57-23

(b) Maintenance Programs Not affected.

(c) Special Instructions for Continued Airworthiness (ICA) The effect of this Service Bulletin on the special ICA is as follows:

YES NO

- Electrical Wiring Interconnection System (EWIS) - X

- Fokker 70/100 Airworthiness Limitations Section (ALS):

• Fuel Tank Safety (FTS) - X

• Damage Tolerance of Fatigue Critical Structure (FCS) - X

• Certification Maintenance Requirements (CMR) - X NOTE: If “YES”, when not already incorporated, the changed ICA will be incorporated in the MRB, the Airworthiness Limitations Section (ALS) and/or the AMM document(s) within one calendar year from the date of issue of this Service Bulletin. Until then, no actions are required.

(d) Operational Documentation Not affected.

(2) Report to Fokker Services that this Service Bulletin has been carried out on the applicable aircraft.

(3) You have the possibility to send your SB feedback to Fokker Services per “Service Bulletin Reporting Quality Form”. This form is located on the last Service Bulletin page.

(4) For incorporation of this Service Bulletin in your documentation refer to SBF100̻00̻001 (Service Bulletin Introduction, section 4 “Incorporation of Service Bulletins in Documentation of Fokker Services”).

M. Interchangeability or Intermixability of Parts

(1) Not applicable.

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 6 of 30

3. Material Information A. Material – Price and Availability

(1) You can order the necessary parts against list price.

B. Material Required

(1) These parts, which are necessary to complete this Service Bulletin on 1 aircraft, are not part of the mod kit.

New Part Number Qty Keyword Info Drawing Instructions/ * 1 *2 Code Disposition

5.978/1*** * * Brush sealant, fasteners

- - -

5.978/2*** * * Fillet sealant - - -

5.978/3*** * * Interfaying sealant - - - Aerodur Finish C21/100 * * Paint Fk07-027** - - Aerodur Primer S15/60 * * Primer Fk07-008** - - Alclad 2024T3 * * Aluminum sheet t=2.5 mm - - Alclad 2024T3 * * Aluminum sheet t=3.6 mm - - Alodine 1132 Touch-n-Prep * * Conversion coating Fk13-003E** - - Alodine 1201 * * Conversion coating Fk13-003D** - - F0N18-1221-6-xx * * Hi-Lok bolt HL110VF6-xx - - F0N18-1231-6-xx * * Hi-Lok bolt HL112VF6-xx F0N18-1230-6-xx * * Hi-Lok bolt HL113VF6-xx - - F0N18-2230-6 * * Collar HL79-6 - - F0N18-2240-6 * * Collar HL87-6 - - F0N2-1181-6 * * Collar HL70-6 XE-6 / XF-6 - F0N2-1181-8 * - Collar HL70-8 XF-8 - F0N2-1196-6-xx * * Hi-Lok bolt HL11VF6-xx XE-6 - F0N2-1197-6-xx * * Hi-Lok bolt HL11VF6-xx XF-6 / XN-6 - F0N2-1197-8-xx * - Hi-Lok bolt HL11VF8-xx XF-8 - F0N2-1204-6-xx * * Hi-Lok bolt HL12VF6-xx XJ-6 - F0N2-1204-8-xx * - Hi-Lok bolt HL12VF8-xx XJ-8 - F0N2-1205-6-xx * * Hi-Lok bolt HL13VF6-xx XK-6 - F0N2-1207-6 * * Collar HL86PB-6 XJ-6 / XK-6 - F0N2-1207-8 * - Collar HL86PB-8 XJ-8 - F0N2-1208-6 * - Collar HL82APBW-6 XN-8 - MS20426AD4 * - Solid rivet - BB-4 - MS20426AD5 * - Solid rivet - BB-5 - MS20426DD6 * * Solid rivet - XBC-6 - MS20470AD4 - * Solid rivet - BJ-4 - MS20470AD5 * * Solid rivet - BJ-5 - MS20470DD6 * * Solid rivet - XBD-6 - Nycote 88 * * Skydrol resistant coating Fk09-008** - - PR1560MC * * Fuel tank coating Fk15-012** - - Redux 101 * * Bonding primer - - -

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 7 of 30

New Part Number Qty Keyword Info Drawing Instructions/ * 1 *2 Code Disposition W12283-001 * - Repair girder - - - W12283-002 * - Repair girder - - - W12283-003 - * Repair girder - - - W12283-004 - * Repair girder - - - W12283-005 * * Splice repair angle - - - W12283-007 - * Splice repair angle - - - NOTES: * Use as much as necessary ** Refer to the CML for material numbers.

*** Refer to SRM 51-23-01 table 4 or Service Letter 258.

*1 Applicable for Part 1.

*2 Applicable for Part 2.

(2) These mod kit parts are necessary to do this Service Bulletin on 1 aircraft:

(a) Not applicable.

C. Tooling – Price and Availability

(1) Not applicable.

D. Tooling Required

(1) Not applicable.

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 8 of 30

4. Accomplishment Instructions

General:

- These instructions are applicable to the left and right installations.

- Data for the right installation is between parentheses.

- In general, use AMM chapter 20, standard practices-airframe, as guide line for the aircraft modification.

- For CML material number references refer to “MyFokkerFleet.com > Documentation and select CML” and/or AMM chapter 20-30-00.

- For Standards and Process Manual (SPM) references refer to “MyFokkerFleet.com > Documentation and select SPM”.

- For drilling procedures refer to SRM chapter 51-22-01.

- For the application of sealing compound refer to AMM chapter 20-32-00 and chapter 51-

23-00.

- For information on removal/installation of rivets refer to SRM chapter 51-40-02 and/or TH6.3002 (solid rivets) and SRM chapter 51-40-04 and/or TH6.3106 (blind rivets).

- For the installation of Hi-Lok bolts refer to SRM chapter 51-41-01 and/or TH6.3403.

- For the installation of bolts and screws refer to SRM chapter 51-43-01 and/or TH6.3400.

- If not indicated on drawing, in the accomplishment instructions or referenced AMM procedures, use standard application and inspection of torque values acc to AMM chapter 20-12-00 and/or TH6.3202.

- For the application of Primer & Paint refer to the AMM chapter 51-21-00.

- For the application of Alodine refer to AMM chapter 51-22-00 and SRM chapter 51-24-01.

- For the application of bonding primer Redux 101 refer to the SPM TH6.7434.

- For information about the rivet codes (type, diameter, length, installation direction) on the drawings refer to the NAS 523 rivet code table on each drawing sheet.

- FoN2.6323 and 2.6324 S-rivets (material 2017A) can always be replaced by MS20426DD or MS20470DD rivets of the same size (SRM 51-40-02).

- Solid rivets can be replaced by Hi-Lok bolts as follows:

- MS20426AD5 rivets by HL13VF6 Hi-Lok bolts and HL87-6 collars.

- MS20426DD6 rivets by HL113VF6 Hi-Lok bolts and HL86PB6 collars.

- MS20470AD5 rivets by HL10VF6 Hi-Lok bolts and HL70-6 collars.

- MS20470DD6 rivets by HL110VF6 Hi-Lok bolts and HL79-6 collars.

- Refer to figures of AMM Task 20-30-00-910-912 (Consumable Materials List - Fokker 70/100 - Section 09 Sealants), Service Letter 258 and/or SRM 51-23-01 Table 4 for alternative sealants/coatings.

- The rear spar lower girder repairs of Part 1 and Part 2 can also be performed at the same time. The fasteners in the splice repair angle at WSTA 10000 according figure 8 (9) remain the same in that case.

WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY

THE INSTRUCTIONS AND MANUFACTURER'S HEALTH AND SAFETY INSTRUCTIONS.

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 9 of 30

Part 1: The Repair of the Corroded Outer Wing Rear Spar Lower Girder between WSTA 8550 and 10000.

A. Prepare the aircraft.

(1) Put the aircraft on jacks, refer to the AMM, chapter 07-11.

(2) Support the wing with contour supports at WSTA 8200 and at 11190.

B. Get access to the repair area.

(1) Remove access panels 536 (636) BB and CB including hinges from the rear spar lower girder, refer to the IPC, figure 57-61-00-03A.

(2) Remove access panels 536 (636) DB, GB, and HB.

NOTE: Access panel 536 (636) HB is the trailing edge lower skin panel between WSTA 9270 and 10550 connected to the rear spar, refer to SBF100-57-049.

(3) Remove tank access panels 526(626) AB, BB, CB and DB. Refer to the AMM, task 28-11-02-000-814.

(4) Remove the aileron and tab. Refer to the AMM, task 27-10-00-000-814.

(5) Remove the inboard balance plate. Refer to the AMM, task 27-10-00-000-834.

(6) Remove the aileron pulley assembly from the rear spar. Refer to the AMM, task 27-11-04-000-814.

(7) Remove the bracket assembly for the aileron anti-upfloat quadrant and pulley, refer to the IPC 27-11-04-06 item 30.

(a) Release tension from the anti-upfloat cables and remove the cable ends from the anti-upfloat quadrant and pulley. For a procedure to release the tension refer to the AMM, task 27-11-00-830-825 steps 7 and 8.A.1. thru 8.A.5.

(b) Remove the bracket assembly from the rear spar.

Refer to figure 2 (item numbers in blue circles).

(8) Remove the balance plate support beams, items 170 and 180.

(9) Remove the WSTA 9270 hinge rib and lower strap;

the WSTA 8700 flutter damper rib;

and the WSTA 9696 skin support rib, items 10, 90, 100, 120 and 150.

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 10 of 30

Refer to figure 3 (items numbers in blue circles).

(10) Remove the three rib connection angles from the rear spar, of the ribs removed in the previous step, items 170 (WSTA 9270) and 200 (WSTA 8700).

(11) Remove the three rear spar stiffeners between WSTA 9270 and 9910, items 50, 100 and 110.

(12) Remove the hoisting point bracket just inboard of rib 9270, item 180.

(13) Inside the fuel tank remove the two rear spar stiffeners, one at each splice location, item 30 and 120.

C. Repair the rear spar lower girder.

Refer to figures 4, 8 (RH: 5, 9) and 6.

(1) In the repair area remove the fasteners in lower girder connecting it with the rear spar web and wing lower skin.

(2) Cut-out corroded girder section with cuts as detailed in figures 4 (5) and 8 (9).

NOTE: To keep the proper edge distance of fasteners at the cut line, cut the girder close to the first fastener holes of the to be removed girder section.

After cutting carefully rework the edge of the remaining girder to have the cut-line in the middle between the first fasteners of the remaining girder and the first fasteners of the repair girder.

(3) Remove girder section in aft direction.

(4) Determine the correct length of the repair lower girder pn W12283-001 (-002).

NOTE: Take the steps in the girder lower flange at WSTA 9270 as reference for correct positioning and determination of the length of the repair girder.

(5) Cut the repair lower girder pn W12283-001 (-002) to the correct length to be able to install in the cut-out area.

(6) Determine the correct length of the splice repair angles pn W12283-005 according figure 4 (5) and 8 (9) and the actual configuration in the aircraft at the splice positions WSTA 8550 and 10000.

(7) Cut the splice repair angles pn W12283-005 to the determined length.

NOTE: Do not change the width of the flanges.

Service Bulletin Fokker Services B.V.

Status:

Released Revision:

1 Released date: (Mmm dd/yy) May 19/15 Security class:

RESTRICTED F100/70 Generic SB no.:

SBF100-57-050 Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement.

Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with the prior written permission of Fokker Services B.V.

Page 11 of 30

(8) Restore surface treatment of the existing cut lower girder, the repair lower girder and the splice repair angles. Use:

- AR conversion coating Alodine 1201 or (Fk13-003D) Alodine 1132 Touch-n-Prep (Fk13-003E)

- AR bonding primer Redux 101

(9) Position the replacement girder and copy drill fastener holes into the replacement girder.

(10) Position both splice repair angles and copy drill all fastener holes of the rear spar web into the vertical flange, and copy drill only the forward row of the lower skin fastener holes into the horizontal flange. Refer to the cross section in figure 6. The fasteners of the aft fastener row in the lower skin will not be installed in the splice repair angles.

(11) Install the reworked repair lower girder pn W12283-001 (-002).

For the fasteners in the rear spar web refer to drawing D12201 sheets 7, 17 or 21, refer to note for the sheet effectivities.

For the fasteners in the lower skin refer to drawing D12013 sheet 5.

Use:

- AR interfaying sealant 5.978/3 or equivalent NOTE: Rivets in the lower girder/lower skin in the fuel tank area are MS20470DD6 installed according the NACA riveting procedure according SRM 51-27-01.

NOTE: Drawing D12201 sheet 7, 17 and 21 effectivities:

Sheet no. Aircraft serial number 21 11268, 11272, 11276.

17 11257, 11258, 11262, 11264, 11265, 11278, 11280, 11281, 11282, 11287, 11288, 11290 thru 11296, 11298, 11300, 11303, 11306, 11308, 11310, 11312, 11313, 11314, 11316, 11318.

7 11301, 11302, 11304, 11305, 11307, 11315, 11317, 11319 thru 11585.

(12) Countersink the six (6) rivet holes (the aft row) in the skin flange of the existing and repair lower girder at position of each splice repair angle. The countersinking must be for a MS20426DD6 rivet.

(13) Install the six (6) rivets in the aft row at each splice repair angle position. The manufactured head is to be installed in the girders, the upset 82° head in the lower skin. Refer to figure 6 and SRM 51-27-01. Use:

- 12 solid rivets pn MS20426DD6

Pages 13–24 of 64