Copy · GE GE90-10 SB 73-0117 R01 · 4 pages

© General Electric Company. Filed by the FAA in regulations.gov docket FAA-2020-0902, the docket of AD 2020-20-17. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '7da9f7e330801d216010c12bf3597fdf48978475a6c9e85e35baf250a982e2ba'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

GE90-100 Service Bulletins (SBs) SB 73-0117 R01 ENGINE FUEL AND CONTROL - General (73-00-00) - Inbound Check of ENG EEC C1 Maintenance Messages Date Printed:

2020/08/13 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 1 of 4 GE90-100 SERVICE BULLETIN - 73-0117 R01 Revised:08/05/2020 SB 73-0117 R01 ENGINE FUEL AND CONTROL - GENERAL (73-00-00) - INBOUND CHECK OF ENG EEC C1 MAINTENANCE MESSAGES Issued:

06/03/2020 GE Designated: -CONFIDENTIAL- The information contained in this document is GE proprietary information and is disclosed in confidence. It is the property of GE and shall not be used, disclosed to others or reproduced without the express written consent of GE, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, designs, or configuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or part.

This technical data is considered subject to the Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to a Non-U.S. Person, whether in the United States or abroad, without the proper U.S.

Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.

Copyright (2020) General Electric Company, U.S.A.

TRANSMITTAL INFORMATION REVISION 1 TO SERVICE BULLETIN 73-0117 Revision 1 is issued to update paragraphs 1., and 3., PLANNING INFORMATION .ACCOMPLISHMENT INSTRUCTIONS The original was issued June 03, 2020. Revision bars in the left margin identify changes.

1. PLANNING INFORMATION A. Effectivity * * * GE90-110B1 and -115B This Service Bulletin is applicable to all GE90-100 engines.

The full authority digital engine control (FADEC) is affected by this Service Bulletin.

B. Description This Service Bulletin provides instructions to do a check for maintenance messages correlated with an inbound ENG EEC C1 flight deck effect/status message. Also, this Service Bulletin provides instructions to remove the FADEC if fuel metering valve (FMV) and thrust lever angle (TLA) maintenance messages are present, or if there are 12 maintenance messages found in a single channel with the ENG EEC C1 flight deck effect.

C. Compliance Category 2 GE recommends that you implement this Service Bulletin within 120 days of original issuance. Once implemented, perform the accomplishment instructions if and when an ENG EEC C1 L or ENG EEC C1 R status message is present during normal pre-flight checks (prior to dispatch).

Impact A This recommendation is to address a condition that may affect Flight Safety.

NOTE:A loss of thrust control (LOTC) may occur.

NOTE:This Service Bulletin can be done on wing.

This Service Bulletin is offered to improve the reliability or performance of your GE product, or to help prevent the occurrence of the event or condition described in this Service Bulletin. If the operator elects not to participate

GE90-100 Service Bulletins (SBs) SB 73-0117 R01 ENGINE FUEL AND CONTROL - General (73-00-00) - Inbound Check of ENG EEC C1 Maintenance Messages Date Printed:

2020/08/13 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 2 of 4 in the bulletin, that decision will be taken into consideration by GE in evaluating future product performance issues that may arise in the operator's fleet.

D. Concurrent Requirements None.

E. Reason

(1) Objective:

To reduce significant events.

(2) Condition:

A FADEC solder ball joint failure initiated a system effect that resulted in a LOTC event.

The LOTC event was preceded by a TLA and FMV resolver feedback faults one flight prior to the event.

(3) Cause:

Accumulated thermal cycles of the FADEC through normal operation causes the solder ball joints to wear out and eventually fail over time.

(4) Inspection:

A check for FMV and TLA resolver feedback faults prior to each dispatch with an ENG EEC C1 status message. If the subject fault messages are present or if more than 12 faults are found in any FADEC channel from the previous flight leg, the FADEC is to be replaced prior to dispatch.

(5) Substantiation:

Substantiation is by fleet experience.

F. Approval This Service Bulletin contains no modification information that revises the approved configuration and therefore does not require FAA or regulatory approval.

G. Manpower No additional man-hours are required to comply with this Service Bulletin.

H. Weight and Balance Weight and balance are not changed.

I. References (Use the latest version of these documents) GE90-100 Boeing 777 Aircraft Maintenance Manual (AMM) J. Publications Affected None.

K. Interchangeability None.

L. Software Accomplishment Summary Not applicable.

2. MATERIAL INFORMATION A. Material - Price and Availability

(1) Parts necessary to do this Service Bulletin:

None.

(2) Other Spare Parts:

None.

(3) Consumables:

None.

B. Industry Support Information None.

C. Configuration Chart None.

D. Parts Disposition None.

E. Tooling - Price and Availability None.

3. ACCOMPLISHMENT INSTRUCTIONS A. Primary Instructions NOTE:Refer to the flowchart in Figure 1.

(1) Deleted.

(2) Use the maintenance access terminal (MAT) central maintenance computer function (CMCF) shop faults function to find the maintenance messages for each channel of the FADEC for the inbound flight leg. Refer to the GE90-100 Boeing 777 AMM, 45-10-00, MAINTENANCE PRACTICES, TASK 45-10-00-740-807, How to Find Shop Faults Data.

NOTE:Only the engine position that corresponds with the ENG EEC C1 L or ENG EEC C1 R status message needs to be selected. Channel A as well as channel B shop fault data need to be reviewed.

GE90-100 Service Bulletins (SBs) SB 73-0117 R01 ENGINE FUEL AND CONTROL - General (73-00-00) - Inbound Check of ENG EEC C1 Maintenance Messages Date Printed:

2020/08/13 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 3 of 4

(a) Select ATA System 71-80 Left/Right Engine.

(b) Select LRU Name Electronic ENG Control (FADEC) (L/R Eng Ch A).

(c) Make a record of all maintenance messages in the Shop Faults List of Contents for the Flight Leg that corresponds with the ENG EEC C1 L or ENG EEC C1 R status message.

(d) Go back and select LRU Name Electronic ENG Control (FADEC) (L/R Eng Ch B).

(e) Make a record of all maintenance messages in the Shop Faults List of Contents for the Flight Leg that corresponds with the ENG EEC C1 L or ENG EEC C1 R status message.

(f) If there are 12 faults recorded in either channel for the Flight Leg that corresponds with the ENG EEC C1 L or ENG EEC C1 R status message, replace the FADEC prior to the next flight as follows:

1 Remove the FADEC. Refer to the GE90-100 Boeing 777 AMM, 73-21-15, REMOVAL/INSTALLATION, TASK 73-21-15-000-801-H01.

2 Install the FADEC. Refer to the GE90-100 Boeing 777 AMM, 73-21-15, REMOVAL/INSTALLATION, TASK 73-21-15-400-801-H01.

(3) Use the MAT CMCF fault history function to find the maintenance message correlated with the ENG EEC C1 L or ENG EEC C1 R status message. Refer to the GE90-100 Boeing 777 AMM, 45-10-00, MAINTENANCE PRACTICES, TASK 45-10-00-740-816, How to Find a Maintenance Message Correlated to an Inbound Flight Deck Effect, make a record of all maintenance messages that correlate with ENG EEC C1 L/R, and do as follows:

(a) If there are no maintenance messages correlated with the ENG EEC C1 L or ENG EEC C1 R status message, replace the FADEC prior to the next flight as follows:

1 Remove the FADEC. Refer to the GE90-100 Boeing 777 AMM, 73-21-15, REMOVAL/INSTALLATION, TASK 73-21-15-000-801-H01.

2 Install the FADEC. Refer to the GE90-100 Boeing 777 AMM, 73-21-15, REMOVAL/INSTALLATION, TASK 73-21-15-400-801-H01.

(4) Compare the maintenance messages recorded in steps 3.A.(2)(c), 3.A.(2)(e), and 3.A.(3) with the conditions that follow:

NOTE:P = 1 or 2, where 1 = Left Engine and 2 = Right Engine Condition Maintenance Message Combination Comments FMV Disagree Fault (73-1439P or 73-2439P) and (76-3520P or 76-1521P or 76-2521P) FMV disagree fault on one of the two channels and any TLA range or disagree on one of the two channels TLA Disagree Fault 76-3520P and (73-1325P or 73-2325P or 73-1439P or 73-2439P) TLA disagree fault on one of the two channels and any FMV range or disagree fault on one of the two channels Range Faults (76-1521P and 73-1325P) or (76-2521P and 73-2325P) FMV and TLA range faults on the same channel

(5) If one of the conditions from step 3.A.(4) is present, replace the FADEC prior to the next flight as follows:

(a) Remove the FADEC. Refer to the GE90-100 Boeing 777 AMM, 73-21-15, REMOVAL/INSTALLATION, TASK 73-21-15-000-801-H01.

(b) Install the FADEC. Refer to the GE90-100 Boeing 777 AMM, 73-21-15, REMOVAL/INSTALLATION, TASK 73-21-15-400-801-H01.

Page 4OCROpen in PDF

GE90-100 Service Bulletins (SBs) SB 73-0117 R01 ENGINE FUEL AND CONTROL - General (73-00-00) - Inbound Check of ENG EEC C1 Maintenance Messages ANY 12 FAULTS IN

ONE OF THE TWO CHANNELS (GE90-100 BOEING 777 AMM 45-10-00, MAINTENANCE

PRACTICES, TASK YES ENG EEC C1 YES 45-10-00-740-807)?

REFER TO STEP 3.A. (2)(1) OF STATUS ON MFD? THIS SERVICE BULLETIN NO NO

NO MAINTENANCE MESSAGES

CORRELATED WITH ENG EEC C1 (GE90-100 BOEING 777 AMM, 45-10-00, MAINTENANCE YES THE FADEC REPLACE DONE

PRACTICES, TASK 45-10-00-740-816)2 REFER TO STEP 3.A. (3)(a) OF

THIS SERVICE BULLETIN NO

FMV/TLA FAULT

COMBINATION PRESENT (GE90-100 BOEING 777 AMM 45-10-00: MAINTENANCE

PRACTICES, TASK YES 45-10-00-740-807 OR GE90-100 BOEING 777 AVM 45-10-00, MAINTENANCE *STATUS MESSAGES

PRACTICES, TASK CHECKED ON 45-10-00-740-816)? MULTIFUNCTIONAL REFER TO STEP 3.A. (4) OF DISPLAY (MFD) AS PART

THIS SERVICE BULLETIN OF PRE AND POSTFLIGHT INO CHECKS.

6018877-00 Accomplishment Instructions Process Flow Figure 1 GE Designated: - CONFIDENTIAL Subject to the restrictions on the media GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or Date Printed: reproduced without the express written consent of GE. Technical data Page 2020/08/13 considered ITAR and/or EAR controlled; transfer of this data to a Non-US 4 Of 4 Person, without USG authorization, is strictly prohibited.