Copy · CF6 SB 73-0142 rev2 · 6 pages

© General Electric Company. Filed by the FAA in regulations.gov docket FAA-2019-0592, the docket of AD 2020-22-02. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '29c06baf6a826f1d207ad0a3320fde711bde607dbea793c6bc6ed345296e816c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CF6-80E1 Service Bulletins (SBs) SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10) - HMU EHSV Overhaul Date Printed:

2019/08/20 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled;

transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 1 of 6 CF6-80E1 SERVICE BULLETIN - 73-0142 R02 Revised:08/15/2019 SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10)

- HMU EHSV OVERHAUL Issued:

12/20/2018 GE Designated: -CONFIDENTIAL- The information contained in this document is GE proprietary information and is disclosed in confidence. It is the property of GE and shall not be used, disclosed to others or reproduced without the express written consent of GE, including, but without limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, designs, or configuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such reproduction in whole or part.

This technical data is considered subject to the Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to a Non-U.S. Person, whether in the United States or abroad, without the proper U.S. Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.

Copyright (2019) General Electric Company, U.S.A.

TRANSMITTAL INFORMATION REVISION 2 TO SERVICE BULLETIN 73-0142 Revision 2 is issued to update paragraphs 1., , 2.,PLANNING INFORMATION , and 3., .MATERIAL INFORMATION ACCOMPLISHMENT INSTRUCTIONS Revision 1 was issued May 14, 2019. The original was issued December 20, 2018. Revision bars in the left margin identify changes.

1. PLANNING INFORMATION A. Effectivity * * * CF6-80E1A2, A3, A4, A4/B This Service Bulletin is applicable to all CF6-80E1 engines.

The hydromechanical units (HMUs) listed in Table 1 are affected by this Service Bulletin:

Table 1. Affected HMUs Honeywell Part Number GE Part Number 441860 1521M74P07 442032 1521M74P08 442276 1521M74P09 442347 1521M74P10 442397 1521M74P11

CF6-80E1 Service Bulletins (SBs) SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10) - HMU EHSV Overhaul Date Printed:

2019/08/20 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled;

transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 2 of 6 442454 1521M74P12 442453 1521M74P13 442559 1521M74P14 442633 1521M74P15 B. Description This Service Bulletin provides a repetitive overhaul of the HMU electro-hydraulic servo valves (EHSVs) at an interval not to exceed 40,000 flight hours since new or last overhaul of the EHSVs due to the potential for fuel coking buildup in the HMU EHSVs.

C. Compliance Category 2

(1) GE recommends that you do this Service Bulletin as soon as possible without effect on revenue service for HMU EHSVs, before 40,000 hours time since new (TSN) or time since overhaul (TSO).

(2) For EHSVs with over 40,000 flight hours since new or last overhaul, or EHSVs that by May 01, 2020 will accumulate 40,000 flight hours since new or last overhaul, GE recommends the removal of the HMU for overhaul of the EHSVs before May 01, 2020.

(3) In case the TSN and/or TSO are unknown, perform the EHSV overhaul per this Service Bulletin before May 01, 2020.

(4) This Service Bulletin must be repeated at a maximum interval of 40,000 flight hours since last overhaul of the EHSVs.

NOTE:GE recommends that soft time for HMU overhauls remains at 20,000 flight hours since last overhaul of the HMU. The 20,000-flight hour soft time for overhauls of the HMU extends to the EHSVs. The overhaul of the EHSVs is part of the HMU overhaul.

Impact A This recommendation is to address a condition that may affect Flight Safety.

NOTE:This Service Bulletin can be done on wing or in shop.

This Service Bulletin is offered to improve the reliability or performance of your GE product, or to help prevent the occurrence of the event or condition described in this Service Bulletin. If the operator elects not to participate in the bulletin, that decision will be taken into consideration by GE in evaluating future product performance issues that may arise in the operator's fleet.

D. Concurrent Requirements None.

E. Reason

(1) Objective:

To reduce the possibility of significant events, in particular, a loss of thrust control, in-flight shutdowns (IFSD), or a tailpipe fire resulting from sticking an HMU fuel metering valve (FMV) EHSV and to reduce the possibility of a significant event resulting from a stuck or sluggish operation of an HMU EHSV.

(2) Condition:

Field experience shows that the buildup of fuel coking or fuel deposits in the HMU EHSVs in units over 40,000 flight hours can cause sticking of the EHSV, resulting in operational issues including loss of thrust control, uncontrolled accels or decels, engine stalls, engine flame-out, or tailpipe fires.

(3) Cause:

The buildup of fuel coking or fuel deposits in the HMU EHSV components can cause the EHSV shuttle valve to respond sluggishly or stick in a certain

CF6-80E1 Service Bulletins (SBs) SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10) - HMU EHSV Overhaul Date Printed:

2019/08/20 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled;

transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 3 of 6 position. This sluggish operation in the HMU EHSV shuttle valve can lead to incorrect positioning of the controlled component, FMV, variable stator vanes (VSVs), variable bypass valves (VBVs), high pressure turbine (HPT) active clearance control (ACC) valve or low pressure turbine (LPT) ACC valve as applicable. The out-of-position component may also set a full authority digital electronic control (FADEC) fault.

(4) Improvement:

The overhaul of the HMU EHSV hardware will decrease the possibility of an operational issue.

Deleted.

(5) Substantiation:

Substantiation is by fleet experience. The engines experiencing operational issues resulting from fuel coking in the HMU EHSVs had over 40,000 flight hours since EHSV overhaul.

F. Approval The data contained in this Service Bulletin has been reviewed by the FAA or authorized entity representing the FAA and the repair(s) and modification(s) herein comply with the applicable Aviation Regulations and are APPROVED for installation in the model(s) listed in this Service Bulletin.

G. Manpower After you get access to the HMU, you will need approximately 5 man-hours to do the replacement portion of this Service Bulletin.

H. Weight and Balance Weight and balance are not changed.

I. References (Use the latest version of these documents) Airbus A330 Aircraft Maintenance Manual (AMM) GEK 99376, CF6-80E1 Engine Manual (EM) GEK 99378, CF6-80E1 Illustrated Parts Catalog (IPC) GEK 100770, CF6-80E1 Component Maintenance Manual (CMM), 73-21-28 NOTE:The reference documents listed below are for the engine manufacturer's internal use only:

MOOG Component Maintenance Manual (CMM), 73-24-01 MOOG Component Maintenance Manual (CMM), 73-24-02 J. Publications Affected None.

K. Interchangeability Not applicable.

L. Software Accomplishment Summary Not applicable.

2. MATERIAL INFORMATION A. Material - Price and Availability

(1) Parts necessary to do this Service Bulletin:

None.

(2) Other Spare Parts:

None.

(3) Consumables:

None.

B. Industry Support Information None.

C. Configuration Chart None.

CF6-80E1 Service Bulletins (SBs) SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10) - HMU EHSV Overhaul Date Printed:

2019/08/20 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled;

transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 4 of 6 D. Parts Disposition Prior to reaching 40,000 flight hours since new or last overhaul, the HMUs are to be sent to Honeywell or an FAA authorized overhaul provider for the EHSV overhaul. Upon return to service, the EHSVs will be zero timed.

The Honeywell shipping address for Prince Edward Island (PEI) is as follows:

Honeywell International Inc.

800 Aerospace Boulevard Slemon Park, Summerside Prince Edward Island Canada COB 2A0 OR Refer to for return address andhttps://myaerospace.honeywell.com instructions.

E. Tooling - Price and Availability None.

3. ACCOMPLISHMENT INSTRUCTIONS A. On-Wing Instructions

(1) Remove the affected HMU (1, from the accessory gearbox (AGB).Figure 1) Refer to the Airbus A330 AMM, 73-21-51, REMOVAL/INSTALLATION, TASK 73-21-51-000-801-A.

(2) Send the removed HMU (1, to Honeywell or an FAA authorizedFigure 1) overhaul provider for the removal and overhaul of the EHSVs. Refer to paragraphs 2.D., and 3.C., Parts Disposition Component Repair .Station NOTE:Deleted.

(3) Install a serviceable HMU (1, in the AGB. Refer to the AirbusFigure 1) A330 AMM, 73-21-51, REMOVAL/INSTALLATION, TASK 73-21-51-400-801-A.

B. In-Shop Instructions

(1) Remove the HMU (1, from the AGB. Refer to the CF6-80E1 EM,Figure 1) 72-00-05, DISASSEMBLY 001.

(2) Send the removed HMU (1, to Honeywell or an FAA authorizedFigure 1) overhaul provider for the removal and overhaul of the EHSVs. Refer to paragraphs 2.D., and 3.C., Parts Disposition Component Repair .Station NOTE:Deleted.

(3) Install a serviceable HMU (1, in the AGB. Refer to the CF6-80E1Figure 1) EM, 72-00-05, ASSEMBLY 001.

C. Component Repair Station

(1) Do an overhaul of the HMU (1, for the part numbers listed inFigure 1) paragraph 1.A., , Table 1. Refer to the CMM, 73-21-28.Effectivity

(2) Send the EHSVs to Honeywell PEI or an FAA-approved repair station for overhaul.

(3) Do the overhaul of the EHSVs in accordance with the latest revision of the MOOG CMM, 73-24-01 or 73-24-02.

(4) Put a mark on the HMU IDG plate. Refer to Aerospace Standard (AS), AS478-2D or -2E after compliance with this Service Bulletin, and do as follows:

(a) For initial incorporation of this Service Bulletin, write SB 73-0142R02 and the date of compliance in a month/year format (for example 03/19) on the IDG plate.

(b) For subsequent incorporation of this Service Bulletin, line out the date, keep legibility, and write the latest date of compliance in a month/year format (for example 03/19).

Page 5OCROpen in PDF

CF6-80E1 Service Bulletins (SBS) SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10) - HMU EHSV Overhaul

(c) If the serial number pad on the IDG plate is blank, make sure to write the original serial number from the HMU identification plate.

(d) If no space is available for the identification mark of this Service Bulletin, get a new IDG plate and do as follows:

When you do the marking of the new IDG plate, make sure to write the original HMU serial number from the old IDG plate or HMU identification plate to the new plate.

LEGEND:

1. HMU 5060793-00 HMU Location Figure 1 GE Designated: - CONFIDENTIAL Subject to the restrictions on the media GE PROPRIETARY INFORMATION - Not to be used, disclosed to Date Printed: others or reproduced without the express written consent of Page 2019/08/20 GE. Technical data is considered ITAR and/or EAR controlled; 5 of 6 transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

CF6-80E1 Service Bulletins (SBs) SB 73-0142 R02 ENGINE FUEL AND CONTROL - HMU (73-21-10) - HMU EHSV Overhaul Date Printed:

2019/08/20 GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written consent of GE. Technical data is considered ITAR and/or EAR controlled;

transfer of this data to a Non-US Person, without USG authorization, is strictly prohibited.

Page 6 of 6