Copy · GEAC Alert Service Bulletin SB-000471 Rev 00 · 7 pages

© GE Aviation Czech. Filed by the FAA in regulations.gov docket FAA-2024-0472, the docket of AD 2024-06-02. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '9d00f606fea9d2cfbf323f903307c6c907c7dc0acb1fe8c0b4beb924601364c8'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

SERVICE BULLETIN NUMBER/REV SB-000471/00

TP100023/4

This document was approved and issued via the GE Aviation Turboprop Document Workflow Process.

The technical content of this document is approved under the authority of the DOA ref. EASA.21J.300.

GE PROPRIETARY INFORMATION THE INFORMATION CONTAINED IN THIS DOCUMENT IS GE PROPRIETARY INFORMATION AND IS DISCLOSED IN CONFIDENCE. IT IS THE PROPERTY OF GE AND SHALL NOT

BE USED, DISCLOSED TO OTHERS OR REPRODUCED WITHOUT THE EXPRESS WRITTEN CONSENT OF GE, INCLUDING, BUT WITHOUT LIMITATION, IT IS NOT TO BE USED

IN THE CREATION, MANUFACTURE, DEVELOPMENT, OR DERIVATION OF ANY REPAIRS, MODIFICATIONS, SPARE PARTS, DESIGNS, OR CONFIGURATION CHANGES OR TO OBTAIN EASA OR ANY OTHER GOVERNMENT OR REGULATORY APPROVAL TO DO SO. IF CONSENT IS GIVEN FOR REPRODUCTION IN WHOLE OR IN PART, THIS NOTICE AND THE NOTICE SET FORTH ON EACH PAGE OF THIS DOCUMENT SHALL APPEAR IN ANY SUCH REPRODUCTION IN WHOLE OR IN PART. THE INFORMATION CONTAINED IN THIS DOCUMENT MAY ALSO BE CONTROLLED BY EXPORT CONTROL LAWS. UNAUTHORIZED EXPORT OR REEXPORT IS PROHIBITED.

GE Confidential

ALERT SERVICE BULLETIN SERVICE BULLETIN NO./REV.

SB-000471/00

SUBJECT ENGINE – Compressor (72-30-00) – Centrifugal Compressor Case inspection

COMPLIANCE CATEGORY CATEGORY 1 Note 1

RECORD OF REVISIONS Revision No. Page Description of Changes 00 All Initial release of the Alert Service Bulletin

Note 1: Refer to Chapter 1.2 – Compliance for more details

SERVICE BULLETIN NUMBER/REV SB-000471/00

GE Aviation Czech Beranových 65 199 02 Praha 9 – Letňany, Czech Republic Tel.: + 420 222 538 111 Date of first Issue 02-Feb-2024 Date of Revision 02-Feb-2024 Revision No. 00 GE Confidential Page 2 of 7

1 PLANNING INFORMATION

1.1 EFFECTIVITY This Alert Service Bulletin is applicable to M601D, M601D-2, M601D-11, M601D-1, M601D-11NZ, M601E, M601Z, M601E -21, M601E-11, M601E-11S, M601E -11A, M601E-11AS, M601F and M601FS engine models.

Centrifugal Compressor Case M601-154.55 and M601-154.65 are affected by this Alert Service Bulletin.

1.2 COMPLIANCE GEAC recommends that you do this Alert Service Bulletin before 10 flight hours or 20 take-offs or 30 days since issue date of this ASB, whichever comes first. (Category 1)

1.3 REASON

1) Objective To reduce significant events.

2) Condition Potential cracks in location of weld around the mounting pad.

3) Cause Crack on Centrifugal Compressor Case Mount Pad weld area was observed on recent significant event which led to Unscheduled Engine Removal (UER).

4) Improvement and inspection One-time detailed visual inspection of the affected part to identify unserviceable condition and its removal from the service.

1.4 SAFETY INTENT Prevent potential consequences of engine separation if crack develops in location of weld around the Mounting Pad of Centrifugal Compressor Case.

1.5 CONFIGURATION DESCRIPTION N/A

1.6 DESCRIPTION This Non-Modification Alert Service Bulletin instructs to perform one-time detailed visual inspection of the affected Centrifugal Compressor Cases. It is recommended to perform performance check and to observe for any signs of ITT (Inter Turbine Temperature) exceedance surpassing prescribed limits throughout the take-off phase.

SERVICE BULLETIN NUMBER/REV SB-000471/00

GE Aviation Czech Beranových 65 199 02 Praha 9 – Letňany, Czech Republic Tel.: + 420 222 538 111 Date of first Issue 02-Feb-2024 Date of Revision 02-Feb-2024 Revision No. 00 GE Confidential Page 3 of 7

1.7 MANPOWER 1-man hour

1.8 EXPENSES Customer covers the cost of the inspection according to this Alert Service Bulletin.

For the Centrifugal Compressor Case replacement, expenses are following:

Table 1 Expenses of the Centrifugal Compressor Case replacement COST

COVERED BY NOTE In warranty Out of warranty Shipping to GEAC GEAC GEAC Customs clearance (export) to GEAC Customer Customer Labor GEAC GEAC Centrifugal Compressor Case GEAC Pro-rata Pro-rated based on consumed life of Centrifugal Compressor Case Shop cost GEAC GEAC Customs clearance (import) back to customer Customer Customer Shipping back to customer GEAC GEAC

1.9 SUPPLEMENTAL INFORMATION For more information, contact Customer Support: tp.ops@ge.com 2 ACCOMPLISHMENT INSTRUCTIONS Follow the accomplishment instructions in chapter 2.1. Report all findings from the detailed inspection to GEAC Customer Support (tp.ops@ge.com) accordingly to 2.1.1.

2.1 ONE TIME DETAILED VISUAL INSPECTION OF CENTRIFUGAL COMPRESSOR CASE Do one-time detailed visual inspection of the affected Centrifugal Compressor Case in the specified areas, shown in Figure 1 in compliance time defined in 1.2.

The following equipment is required:

• A 150 -watt standard spotlight or 40 -watt high intensity spotlight or alternative (commercial) to acquire necessary illumination at minimum of 1000 lux,

• magnification equipment 10x (commercial).

SERVICE BULLETIN NUMBER/REV SB-000471/00

GE Aviation Czech Beranových 65 199 02 Praha 9 – Letňany, Czech Republic Tel.: + 420 222 538 111 Date of first Issue 02-Feb-2024 Date of Revision 02-Feb-2024 Revision No. 00 GE Confidential Page 4 of 7

Refer to Figure 1.

NOTE: Soot marks in proximity of mount pads could indicate presence of cracks.

WARNING: ACETONE SOLVENT IS EXPLOSIVE, AN IRRITANT, AN ALLERGEN, A ND HAS POISONOUS DETERIORATION. USE VAPOR/FUME CONTROL OR A RESPIRATOR.

WARNING: ISOPROPYL ALCOHOL IS TOXIC AND FLAMMABLE. USE PERSONAL PROTECTION EQUIPMENT. USE IN WELL-VENTILATED AREA.

A. Clean the inspected weld and surrounding areas of Centrifugal Compressor Case using cloth moistened with acetone or isopropyl alcohol.

B. Do detailed inspection of the welds around the three engine Mount Pads of the Centrifugal Compressor Case for:

(1) Cracks:

Maximum serviceable limit: No cracks allowed.

Repair method: Replace the Centrifugal Compressor Case.

NOTE: If crack found, or any dispute concerning the presence of crack stop engine operation and contact GEAC Customer Support.

Figure 1 Inspection area around all (3) Mount Pads of the Centrifugal Compressor Case

SERVICE BULLETIN NUMBER/REV SB-000471/00

GE Aviation Czech Beranových 65 199 02 Praha 9 – Letňany, Czech Republic Tel.: + 420 222 538 111 Date of first Issue 02-Feb-2024 Date of Revision 02-Feb-2024 Revision No. 00 GE Confidential Page 5 of 7

Figure 2 Examples of inspection area around Mount Pads; engine mounted on the aicraft (for reference only)

2.1.1 Record of Accomplishment

2.1.1.1 Record an accomplishment of this Alert Service Bulletin in the Engine Log Book, including the date and the name of the person who has accomplished the ASB.

2.1.1.2 Fill and send the inspection report to the GEAC Customer Support regardless of the finding from the inspection. Accomplishment form is given in Attachment 1 of this ASB.

NOTE – ADDITIONAL RECOMMENDATION 1: GEAC recommends to run the performance check , see applicable EMM Section : 71-00-00 para 2. Power Plant Performance Check – EMM-0982309, EMM- 0982302 and 72.03.00 para 3. Engine Performance Check – EMM-0982055, EMM-0982051. ITT increase of 10 °C or more since last periodical inspection may indicate excessive bleed air leak. If this step increase of ITT is observed perform inspection according to 2.1.

NOTE – ADDITIONAL RECOMMENDATION 2: If ITT exceedance is experienced during the flight, GEAC recommends to stop the operation and perform inspection according to 2.1 before the next flight.

3 MATERIAL INFORMATION

3.1 REQUIRED MATERIAL

• Acetone (commercially available)

• Isopropyl alcohol (commercially available)

SERVICE BULLETIN NUMBER/REV SB-000471/00

GE Aviation Czech Beranových 65 199 02 Praha 9 – Letňany, Czech Republic Tel.: + 420 222 538 111 Date of first Issue 02-Feb-2024 Date of Revision 02-Feb-2024 Revision No. 00 GE Confidential Page 6 of 7

3.2 TOOLING

• A 150 -watt standard spotlight or 40 -watt high intensity spotlight or alternative ( commercially available) to acquire necessary illumination at minimum of 1000 lux,

• magnification equipment 10x (commercially available).

REFERENCES [1] Engine Maintenance Manual No. 0982051 for M601D engines [2] Engine Maintenance Manual No. 0982055 for M601E, M601E-21 engines [3] Engine Maintenance Manual No. 0982309 for M601D-1, M601D-2, M601D-11, M601D-11NZ, M601Z engines [4] Engine Maintenance Manual No. 0982302 for M601E-11, M601E-11S, M601E-11A, M601E-11AS, M601F, M601FS engines

OTHER PUBLICATIONS AFFECTED None

ATTACHMENTS Attachment 1 – ASB Accomplishment Form

Approved by Nicolardi, Luca Head of Design Organization

SERVICE BULLETIN NUMBER/REV SB-000471/00

TP100023/4

Attachment 1 – ASB Accomplishment form

ALERT SERVICE BULLETIN

ACCOMPLISHMENT FORM Alert Service Bulletin Number Alert SB-000471 rev. 00 Date (YYYY/MM/DD) Company name Company address Engine & Centrifugal Compressor Case information Engine Serial number Centrifugal Compressor Case P/N Engine Model Centrifugal Compressor Case S/N

Engine TSN Centrifugal Compressor Case CSN Engine TSO Engine NS Centrifugal Compressor Case CSO Engine NV Engine NP Performed work – ONE TIME DETAILED VISUAL INSPECTION OF THE CENTRIFUGAL

COMPRESSOR CASE FINDINGS

MOUNT PAD I MOUNT PAD II MOUNT PAD III yes no yes no yes no CRACKS ☐ ☐ ☐ ☐ ☐ ☐ SOOT MARKS ☐ ☐ ☐ ☐ ☐ ☐

ANY FURTHER DESCRIPTION OF THE FINDINGS

ATTACH ANY PICTURE OF THE FINDING Accomplished by

NAME IN CAPITALS

SIGNATURE Note:

TSN – Time Since New TSO – Time Since Overhaul NS – Number of engine starts NV – Number of take offs NP – Number of featherings P/N – Part Number S/N – Serial Number CSN – Cycles Since New CSO – Cycles Since Overhaul