Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6ece6e7692a2acf81bd723bacb25da6fb77b56ff945f903f96553c8de3b1cf72' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6ece6e7692a2acf81bd723bacb25da6fb77b56ff945f903f96553c8de3b1cf72' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
INTERIORS PHOENIX, ARIZONA 85040
ALERT SERVICE BULLETIN ATA SYSTEM: 25 4A4030-25A379 Page 1 of 38 Orig. - Aug 10/09 Subject: Equipment/Furnishings - Evacuation Systems - TRANSMITTAL OF TECHNICAL DATA (EAR):
THESE COMMODITIES, TECHNOLOGY OR SOFTWARE ARE CONTR OLLED BY THE U.S. EXPORT ADMINISTRATION REGULATIONS (EAR). DIVERSION CONTRARY TO U.S. LAW IS PROHIBITE D.
LICENSE EXCEPTION: NLR ECCN: 9E991
1. Planning Information A. Effectivity
(1) Equipment - This Service Bulletin affects Embrae r 170 and 175 forward door emergency evacuation slides manufactured by Goodrich Corporation. The affected units are listed in Table 1.
Table 1. Unit Effectivity
(2) Action - Modify affected slides to prevent door stall due to the slide pack lacing not completely opening and to prevent excessive slide tilt during slide deployments, and inspect the aspirator for damage due to excessive force applied during the slide packing process.
B. Concurrent Requirements Goodrich Service Bulletin 4A4011/4A4030-25-350 affects P/N 4A4030-2 slides and must be accomplished prior to or concurrently with this Service Bulletin (No. 4A4030-25A379).
Nomenclature Evacuation System P/N Affected Unit S/N Slide, Fwd Door, LH/RH 4A4030-2 and -4 EB0001, EB0002 , EB0003, EB0005, and ED0001 thru ED1299 Modify Slide to Prevent Door Stall and Excessive Slide Tilt
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 2 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
C. Reason
(1) Description
(a) During two separate scheduled sampling tests, P/ N 4A4030-4 slides were involved in door stall incidents. An investigation determined that the slide pack lacing did not open completely, even though the girt was under tension from the door booster.
(b) Goodrich has received two reports from operators that Embraer 170 series forward door slides deployed with excessive tilt during scheduled slide deployment tests.
(c) Goodrich received a report from an operator that during a scheduled slide deployment test, an Embraer 170 series forward door slide deployed completely but then lost air pressure due to a damaged aspirator.
(2) Scope of Action
(a) This Service Bulletin provides a complete and to tal measure for the door stall, slide tilt, and aspirator subjects noted above.
(b) This Service Bulletin 4A4030-25A379 supersedes t he action of Goodrich Service Bulletin 4A4030-25A392.
(c) The units listed in Table 2, below, incorporate these modifications at the time of manufacture, and are not affected by this Service Bulletin.
D. Description This Service Bulletin specifies the following actions:
(1) Inspect the aspirator body for damage
(2) Remove and discard the bungee cord
(3) Modify the packboard soft covers
(4) Disassemble the charged cylinder assembly, reduc e the regulator output pressure, and reassemble the charged cylinder assembly
(5) Modify the girt
(6) Install a new bottom flap and speed lacing on th e packboard
(7) Install a new pack release pin and lanyard on th e girt sleeve
(8) Repack the slide and install a lacing assist str ap Table 2. Modification Effectivity Nomenclature Evacuation System P/N S/N Effectivity Slide, Fwd Door, LH/RH 4A4030-5 and Subsequent ED1300 and Subsequent
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 3 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
E. Compliance Recommendation
(1) For slides on which 13 or more months have elaps ed from the slide date of manufacture (DOM) or from the date of last repack (whichever date is newer), perform this Service Bulletin within 6 months from the release of this Service Bulletin.
(2) For slides on which 12 months or less have elaps ed from the slide DOM or from the date of last repack (whichever date is newer), perform this Service Bulletin not later than when the slide reaches 18 months from the slide’s DOM or last repack date.
F. Approval This Service Bulletin has been reviewed by the Federal Aviation Administration (FAA) and the repairs and modifications described herein comply with the applicable Federal Aviation Regulations (FAR's) and are FAA approved.
G. Manpower
(1) When performed as a continued time maintenance a ctivity, Goodrich estimates that 12 manhours are required to accomplish this Service Bulletin.
(2) When performed in conjunction with an overhaul, Goodrich estimates that 3 man-hours in addition to that normally used for slide overhaul are required to accomplish this Service Bulletin.
H. Weight and Balance The accomplishment of this Service bulletin will increase the total weight of the unit by approximately
0.7 lbs (.32 Kg).
I. Electrical Load Data Not affected J. Reference The following Goodrich publications were used in the preparation of this Service Bulletin.
Maintenance personnel should refer to these documents when performing these actions.
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 4 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
K. Publications Affected CMM 25-60-38 and CMM 25-60-39 will require revision as a result of this Service Bulletin.
2. Material Information A. Material – Price and Availability
(1) Modification Parts – The parts required to accom plish this Service Bulletin are available in modification kits, P/N 490402-1 and P/N 490402-3. Modification kit P/N 490402-1 is designed to be used to modify a unit for continued time in service. Modification kit P/N 490402-3 is designed to modify the unit in conjunction with a unit overhaul. To accomplish the overhaul, a packing kit P/N 490260-7 is required (one per slide) and must be purchased separately. Modification kits and packing kits are available from Goodrich Interiors, Evacuation Systems, Phoenix, Arizona (VOACH4). Table 4, below, provides applicability and usage information for the modification kits.
Table 5, below, provides the parts breakdown for the modification kits. Lead time for the modification kits is 30 days.
NOTE: Orders should be addressed to Goodrich Corporation 3414 S. Fifth St.
Phoenix, AZ 85040-1169 USA Attn: Customer Service Tel: 602-243-2200 Fax: 602-243-2300 Table 3. Reference Publications Document Description Application 25-60-38 Component Maintenance Manual (CMM) Slide P/N ’s 4A4011 and 4A4030 Series 25-60-39 CMM Charged Cylinder Assembly P/N 4A4089 Series 25-60-40 CMM Aspirator P/N 5A3265-13 SB 4A4011/4A4030- 25-350 Goodrich Service Bulletin Slide P/N’s 4A4011-2 and 4 A4030-2 501761 Packing Instructions Slide P/N 4A4030-5 SNL 25-191 Service Newsletter Slide P/N’s 104003, 104 005, 4A4011, and 4A4030 series
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 5 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
(2) Aspirator Repair Parts – On some slides the aspi rator may need to be repaired. Repair parts are not included in the modification kits (P/N 490402-1 and -3) or in the packing kit (P/N 490260-7) because only a minority of slides will require aspirator repair (refer to Paragraph 3.D, and 3.F.
below). Therefore, procure the aspirator and seal ring kit (P/N 490255-1), aspirator inlet fitting (P/N 3A3910-1), the closure assist spring (P/N 3A3733-1), or any other repair parts as needed.
(3) Other Materials - Normal evacuation slide mainte nance materials are required. Refer to the applicable Goodrich Component Maintenance Manuals and Packing Instructions (reference paragraph 1.J and Table 3, above) for this information.
Table 4. Modification Kit Data Kit P/N QTY
PER UNIT
PRICE NOMENCLATURE INSTRUCTION/DISPOSITION 490402-1 1 * Kit Modification, SB 25-379 Use to modify P/N 4A4030 series slides as a continued time action 490402-3 1 * Kit Modification, SB 25-379 Use to modify P/N 4A4030 series slides in conjunction with an overhaul** *Refer to Industry Support Information, paragraph B, below.
** Packing Kit (P/N 490260-7) is also required to accomplish the overhaul and must be purchased separately.
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 6 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
*P/N 490402-1 is designed to be used to modify a unit as a continued time action.
**P/N 490402-3 is designed to modify the unit in conjunction with a unit overhaul. To accomplish the overhaul a packing kit (P/N 490260-7) is required (one per slide) and must be purchased separately.
Table 5. Modification Kits Parts Breakdown P/N Nomenclature QTY 490402-1 QTY 490402-2 QTY 490402-3 490402-1 Kit, Modification, SB 25-379* X 490402-2 Kit, Modification, Regulator 1 X 1 490402-3 Kit, Modification, SB 25-379** X 240443-1 Patch, Soft Cover 2 2 240470-2 Patch, Girt Sleeve Flap 1 1 240477-1 Patch, Girt 1 1 240477-4 Patch, Girt 1 1 4A4101-33 Soft Cover Flap Assembly, Fwd 1 240428-8 Strap, Lacing Assist 1 1 240151-5 Cord, Replaceable 1 240180-10 Restraint, Safety Tie (black) 5 240180-12 Restraint, Safety Tie (green) 2 240180-14 Restraint, Safety Tie (blue) 2 240180-15 Restraint, Safety Tie (red) 1 4A3613-280 Restraint Assy, Shear Pin, 280 Lbs.
1 300698-1 Pin, Parachute 1 1 240473-1 Patch Assembly, Lanyard 1 1 490402-17 Bar Code “4A4030-5” 1 1 510236-2 Decal 1 1A2313-7 O-Ring 1 1A2419 Seal Rod 1 680146-916 O-Ring 1
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 7 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
B. Industry Support Information
(1) Modification kits required to perform this Servi ce Bulletin will be supplied free of charge for orders placed before March 31, 2011. To be eligible for free of charge kits, the purchaser must reference this Service Bulletin and provide the part number and serial number of the units for which those kits are being ordered. The labor allowance for this Service Bulletin is 12.0 hours per unit when the modification is performed as a continued time action, and 3.0 hours per unit when the modification is performed in conjunction with an overhaul.
(2) Standard warranty terms are applicable to aspira tor repairs or other repairs made as part of this Service Bulletin accomplishment.
C. Tooling
(1) Cable or heavy wire cutter. This item is commerc ially available.
(2) Sheet metal snips. This item is commercially ava ilable.
(3) Fiberscope - Portable, flexible fiberscope (bore scope) with a light and angled mirror.
(4) Heater Box* - Goodrich P/N 540743-1. Price is $1 200.00.
(5) Girt Folding Fixture* - Goodrich P/N 540633-1. P rice is $1041.00
(6) Other Tools – Normal evacuation slide maintenanc e tooling is required. Refer to the applicable Goodrich Component Maintenance Manuals and Packing Instructions (reference paragraph 1.J and Table 3, above) for this information.
*Suggested Source of Supply:
NOTE: Goodrich Corporation 3414 S. Fifth St.
Phoenix, AZ 85040-1169 USA Attn: Customer Service Tel: 602-243-2200 Fax: 602-243-2300
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 8 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
3. Accomplishment Instructions WARNING: FOLLOW ALL WARNING AND CAUTION NOTES AND PROCEDURES IN THE
APPLICABLE GOODRICH MAINTENANCE DOCUMENTS (REFERENC E PARAGRAPH
1.J AND TABLE 3, ABOVE) WHEN PERFORMING THE FOLLOWING WORK PROCEDURES.
NOTE: The following instructions assume that the unit has been removed from the aircraft and has been moved to the workshop.
NOTE: For P/N 4A4030-2 slides, Service Bulletin 4A4011/4A4030-25-350 must be accomplished concurrently with this Service Bulletin (reference Concurrent Requirements, paragraph 1.B, above). Refer to Service Bulletin 4A4011/4A4030-25-350 as noted in the following Accomplishment Instructions.
A. Unpack the evacuation slide in accordance with th e DISASSEMBLY section of Goodrich Component Maintenance Manual (CMM) 25-60-38.
B. (P/N 4A4030-2 slides only) Refer to Service Bulle tin 4A4011/4A4030-25-350, Paragraph 2, Accomplishment Instructions, and perform steps 2.C through 2.G of that Service Bulletin.
However, skip the girt sleeve modification in steps 2.F(2) through 2.F(7) of Service Bulletin 4A4011/4A4030-25-350.
C. Inspect the Girt Installation
(1) Use shop air and inflate the slide to 2.25 to 2. 75 psi (15.51 to 18.96 kPa).
(2) Use a tape measure and pencil and mark lines on the head end cross tube at 2.25 inches (5.72 cm) and 3.25 inches (8.26 cm) above the seam, on each side of the girt as shown in Figure 1, Inset A, below.
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 9 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
Figure 1.
Verify Girt Installation Location
(3) Confirm the girt installation location is correc t by verifying that the girt grommet strip is between the two pencil lines. See Figure 1, Inset A, above for a correct installation location and Figure 2, below, for an incorrect installation location.
GR4A4030SB25A379001
3.25 INCHES
(8.26 cm)
2.25 INCHES
(5.72 cm) PENCIL LINES
GIRT GROMMET STRIP (Between the Two Pencil Lines)
INSET A GIRT
GIRT GROMMET STRIP
TUBE SEAM
HEAD END
CROSS TUBE
TUBE SEAM
PENCIL LINES (4 Places)
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 10 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
NOTE: If the girt grommet strip is outside of the pencil lines below (as shown in Figure 2) or above (not shown), the girt installation location is incorrect.
Figure 2.
Incorrect Girt Installation Location
(4) If the girt is installation location is incorrec t, skip to paragraph 3.D.
(5) Confirm the girt is installed tightly against th e head end cross tube as follows.
(a) Visually verify that a gap does not exist betwee n the girt and the head end cross tube in the area of the pencil marks as shown in Figure 3.
(b) If a gap is found between the girt and the cross tube as shown in Figure 4, skip to paragraph 3.D.
GE4A4030SB25A379002
3.25 INCHES
(8.26 cm)
2.25 INCHES
(5.72 cm) PENCIL LINES
GIRT GROMMET STRIP (Below the Two Pencil Lines)
TUBE SEAM
INCORRECT
GIRT INSTALLATION
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 11 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
Figure 3.
Correct Girt Installation Tightness Figure 4.
Incorrect Girt Installation Tightness (Too Loose) PENCIL LINES
TUBE SEAM GIRT
HEAD END TUBE
GIRT GROMMET STRIP GR4A4030SB25A379003
GIRT IS TAUT AROUND THE TUBE. THERE IS NO GAP
BEWEEN THE TUBE AND THE GIRT.
PROPERLY INSTALLED GIRT
TUBE SEAM
GIRT HEAD END TUBE
GIRT GROMMET STRIP GR4A4030SB25A379004 THE GIRT IS LOOSE.
THERE IS A GAP BETWEEN
THE HEAD END TUBE AND THE GIRT.
IMPROPERLY INSTALLED GIRT
Goodrich
ALERT SERVICE BULLETIN 4A4030-25A379 Page 12 of 38 Orig. - Aug 10/09 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTI ONS ON THE FIRST PAGE.
(6) If the girt is determined to be installed proper ly, skip to paragraph 3.E.
D. Girt Removal and Repair NOTE: The removal and installation of the girt is a major repair. Therefore, units on which the girt is installed incorrectly must be shipped to a Goodrich Service Center to perform those repairs.
(1) Move the unit to a Goodrich Service Center for r epair of the girt installation. Refer to Goodrich SNL 25-191 for packaging and shipping instructions.
E. Modify Girt
(1) Use the inflate/deflate valve to deflate the inf latable.
(2) Use scissors to remove the snap loop by cutting the snap loop off flush along the edge of the girt, without damaging the girt. See Figure 5.
Figure 5.
Remove the Snap Loop