Copy · Oman Air - SB 25-338 R.2 · 10 pages

© Goodrich. Filed by the FAA in regulations.gov docket FAA-2008-0176; AD 2008-24-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextOCR

This text is OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '8ff1d2f84620f16fc5966d901883dceb6a3c01ddb550c82bc9bf4a6507e2cd01'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

3596109

GOODRICH

INTERIORS PHOENIX, ARIZONA 85040

SERVICE BULLETIN ATA SYSTEM: 25 Subject: Equipment/Furnishings - Evacuation Systems - Modify Regulator With New Vespel Piston Plug and Modify 5A3307 Slide Valise

1. Planning Information A. Effectivity

(1) Equipment - B737NG forward and aft door evacuation slides manufactured by Goodrich Corporation and its predecessor, BFGoodrich, Aircraft Evacuation Systems, as listed in Table 1, below, are affected by this Service Bulletin.

NOTE: Revision 2 does not change the technical content of this Service Bulletin. Units modified under the previous issues of this Service Bulletin do not require additional modification.

Table 1. Unit Effectivity Nomenclature Affected Unit P/N Affected Unit Serial No.

Slide, Fwd Door, LH/RH 5A3086-3 (Boeing P/N 10-61323- All 1002) Slide, Aft Door, LH/RH 5A3088-3 (Boeing P/N 10-61323- All 1003)

RECEIVED : 0 2 JUN 2009 Orig. - Jul 7/03 OMAN AIR 25-338 Rev. 2 - May 8/09 ENGG. TECHNICAL LIBRARY Page 1 of 9 TRANSMITTAL OF TECHNICAL DATA (EAR):

THESE COMMODITIES, TECHNOLOGY OR SOFTWARE ARE CONTROLLED BY THE U.S. EXPORT ADMINISTRATION REGULATIONS (EAR). DIVERSION CONTRARY TO U.S. LAW IS PROHIBITED.

LICENSE EXCEPTION: NLR ECCN: 9E991

Page 2OCROpen in PDF

Goodrich

SERVICE BULLETIN Table 1. Unit Effectivity (Cont.)

Nomenclature Affected Unit P/N Slide, Fwd/Aft Doors, LH/RH 5A3307-1 (Boeing P/N 10-61323- 2001) and 5A3307-3 (Boeing P/N 10-61323-2002) Affected Unit Serial No.

BNG0001 thru BNG4647, BNG4656 thru BNG4660, BNG4678 thru BNG4680, BNG4689 thru BNG4691, BNG4696, BNG4705 thru BNG4708, BNG4741, BNG4742, BNG4749, BNG4750, BNG4771 thru BNG4774, BNG4796 thru BNG4799, BNG4818, BNG4819, BNG4844, BNG4845, BNG4864, BNG4932, and BNG5012 thru BNG5015 Action - For all affected units, modify regulator P/N 4A3865-2 or -3 by replacing the piston plug in the vespel piston with a new piston plug. For affected 5A3307 series units, install a new ensolite pad on the valise and remove the trigger housing cover on P/N 5A3307-3 units.

NOTE: For affected P/N 5A3307 series units, accomplishment of these modifications supersedes the modifications described in previously released Goodrich Service Bulletins 5A3307-25-309 and 5A3307-25-316.

B. Reason

(1) Description - Goodrich has received three (3) reports that B737NG slides have not inflated during scheduled slide deployments. The cause has been traced to misinstallation of the rod inside the regulator. If the rod is installed upside down, the regulator can be charged but the upside down rod will prevent the regulator from actuating when the firing line is pulled. In order to prevent future occurrences of this nature, Goodrich has developed a new insert for the vespel piston. The new piston plug will prevent the vespel piston from sealing the regulator if the rod is installed upside down, which will make it impossible to charge the regulator if the rod is misinstalled. Since the regulator cannot be charged in this condition, the maintenance technician will get an immediate indication that the rod is misinstalled and will be able to correct the error prior to placing the regulator into service.

For 5A3307 units, Goodrich has developed a longer ensolite pad (P/N 300256-102) for installation on the valise. This pad serves the same purpose as the pad installed under Goodrich Service Bulletin 5A3307-25-316 and also provides the trigger housing shield function of the trigger housing cover installed under Goodrich Service Bulletin 5A3307-25-309. Installation of the longer ensolite pad allows for removal of the trigger housing cover and will provide a more direct path for extraction of the firing line from the regulator during evacuation slide operation.

Installation of the new ensolite pad supersedes and inactivates the modifications provided in Goodrich Service Bulletins 5A3307-25-309 and 5A3307-25-316.

25-338 Rev. 2 - May 8/09 Page 2 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 3OCROpen in PDF

Goodrich

SERVICE BULLETIN

(2) Scope of Action - This Service Bulletin action is a complete and total measure. The modifications described in this Service Bulletin create field service configurations and there is no true production effectivity for these changes.

NOTE:

1) For 5A3307 series, a concurrent but different configuration change is being made in new production units. That change is described in Goodrich Service Bulletin 5A3307-

25-339. Table 2, below, shows that change point for the 5A3307 series. The units listed in Table 2, below, are not affected by this Service Bulletin.

P/N 5A3086 series and 5A3088 series slides are no longer manufactured; therefore, "new" production effectivity information is not applicable for these models.

Table 2. Production Effectivity for 5A3307 Series Nomenclature Evacuation System P/N S/N Effectivity Slide, Fwd/Aft Doors, 5A3307-5 BNG4648 thru BNG4655, BNG4661 thru BNG4677, LH/RH (Boeing P/N 10-61323-2003) BNG4681 thru BNG4688, BNG4692 thru BNG4695, BNG4697 thru BNG4704, BNG4709 thru BNG4740, BNG4743 thru BNG4748, BNG4751 thru BNG4770, BNG4775 thru BNG4795, BNG4800 thru BNG4817, BNG4820 thru BNG4843, BNG4846 thru BNG4863, BNG4865 thru BNG4931, BNG4933 thru BNG5011, and BNG5016 and subsequent.

C. Description For all affected units, this service bulletin describes modifying regulator assembly P/N 4A3865-2 or -3 by replacing the piston insert plug P/N 3A3833-1 with a new Piston Plug P/N 300382-1. If not previously accomplished, this modification also requires replacement of the rod in accordance with Goodrich Service Bulletin 25-308.

For affected 5A3086 series and 5A3088 series units, this service bulletin also requires replacement of the regulator trigger housing in accordance with Goodrich Service Bulletin 5A3086/5A3088-25-336 or 5A3086/5A3088-25-302.

For affected P/N 5A3307-1 slides, this service bulletin also requires installation of Ensolite Pad P/N 300256-102 on the valise (instead of modifying the slide per Goodrich Service Bulletin 5A3307-25-

309).

For affected P/N 5A3307-3 slides, this service bulletin also requires removal of the Trigger Housing Cover P/N 3A4083-1 (installed under Goodrich Service Bulletin 5A3307-25-309) and installation of Ensolite Pad P/N 300256-102.

Rev. 2 - May 8/09 25-338 Page 3 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 4OCROpen in PDF

Goodrich

SERVICE BULLETIN D. Compliance Recommendation Recommended at the next scheduled overhaul. Prior or concurrent incorporation of previously released Goodrich Service Bulletins 25-308 and 5A3086/5A3088-25-336 or 5A3086/5A3088-25-302* is required.

NOTE: *Goodrich Service Bulletin 5A3086/5A3088-25-302 contains product improvement modifications not provided in Service Bulletin 5A3086/5A3088-25-336 and incorporation of Service Bulletin 5A3086/5A3022-25-302 is recommended.

NOTE: This Service Bulletin is listed in Boeing Service Bulletin 737-25-1491, which is mandated by FAA Airworthiness Directive 2008-24-08.

E. Approval This Service Bulletin has been reviewed by the Federal Aviation Administration (FAA) and the repairs and modifications described herein comply with the applicable Federal Aviation Regulations (FAR's) and are FAA approved.

Manpower For 5A3086 series and 5A3088 series units, no additional time is required to modify the regulator during a scheduled overhaul. For 5A3307 series units, installation of the ensolite pad on the valise will increase normal slide overhaul manpower requirements by approximately 0.25 hours.

G. Parts and Materials

(1) Parts - For all units, 1 each piston plug P/N 300382-1 is required to modify each regulator. For affected 5A3307 series units, 1 each ensolite pad P/N 300256-102 is required to modify each slide. Parts are available from Goodrich Corporation, Phoenix, AZ (VOACH4). Modification kits NOTE: This service bulletin modification requires prior or concurrent incorporation of previously released Goodrich Service Bulletins 25-308 and 5A3086/5A3088-25-336 or 5A3086/5A3088-25-302. If not previously accomplished, refer to those bulletins for material information applicable to those modifications.

• For P/N's 5A3086 and 5A3088 series units not previously modified under Goodrich Service Bulletin 5A3086/5A3088-25-302, concurrent incorporation of that modification is recommended. Refer to Goodrich SB 5A3086/5A3088-25-302 for material information applicable to that modification.

(2) Other Materials - Normal evacuation slide and charged cylinder assembly maintenance materials are also required. Refer to Goodrich Component Maintenance Manuals 25-60-35, 25-60-36 and 25-60-37 for these materials.

H. Tooling Normal evacuation slide and charged cylinder assembly maintenance tooling is required. Refer to Goodrich Component Maintenance Manuals 25-60-35, 25-60-36 and 25-60-37 for this tooling.

Weight and Balance Not affected.

25-338 Rev. 2 - May 8/09 Page 4 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 5OCROpen in PDF

Goodrich

SERVICE BULLETIN J. Reference The following publications were used in the preparation of this Service Bulletin and should be referred to by maintenance personnel when performing these actions.

Table 3. Reference Publications Document Description Application 2001-15-01 FAA Airworthiness Directive 2008-24-08 FAA Airworthiness Directive 5A3086/5A3088-25-302 Goodrich Service Bulletin 25-308 Goodrich Service Bulletin 5A3307-25-309 Goodrich Service Bulletin B727, B737 and B757 Aircraft B737NG Aircraft Slides P/N 5A3086-3 and 5A3088-3 Slides P/N 5A3086-3, 5A3088-3 and 5A3307-1 Slide P/N 5A3307-1 5A3307-25-316 Goodrich Service Bulletin Slide P/N 5A3307 series 5A3086/5A3088-25-336 Goodrich Service Bulletin Slides P/N 5A3086-3 and 5A3088-3 5A3307-25-339 Goodrich Service Bulletin Slide P/N 5A3307 series 737-25-1403 Boeing Service Bulletin B737NG Door Mounted Escape Slides 737-25-1491 Boeing Service Bulletin B737NG Door Mounted Escape Slides 25-60-35, Rev 5 or later Goodrich Component Charged Cylinder Assembly P/N 4A3756 series Maintenance Manual (CMM) and P/N 4A3904 series 25-60-36 Goodrich CMM Slides P/N 5A3086 series and 5A3088 series 25-60-37 Goodrich CMM Slide P/N 5A3307 series K. Publications Affected Goodrich Component Maintenance Manuals 25-60-35, 25-60-36 and 25-60-37 will require revision as a result of this Service Bulletin.

Rev. 2 - May 8/09 25-338 Page 5 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 6OCROpen in PDF

Goodrich

SERVICE BULLETIN

2. Accomplishment Instructions WARNING: FOLLOW ALL WARNING AND CAUTION NOTES AND PROCEDURES IN THE

APPLICABLE GOODRICH MAINTENANCE DOCUMENTS (REFERENCE PARAGRAPH

1.J, ABOVE) WHEN PERFORMING THE FOLLOWING WORK PROCEDURES.

NOTE: The following instructions assume that the unit has been removed from the aircraft and is in the workshop.

A. If not previously accomplished, unpack the slide and remove the charged cylinder assembly in accordance with the Disassembly section of the applicable evacuation slide Component Maintenance Manual (CMM) (reference Table 3, above).

B. Discharge the charged cylinder assembly and remove the regulator in accordance with the Disassembly section of Goodrich CMM 25-60-35.

C. Modify the Regulator P/N 4A3865-2 or -3 as follows. Refer to Goodrich CMM 25-60-35 as required.

(1) Disassemble the regulator in accordance with the Disassembly section of the manual.

(2) Discard the Piston Insert P/N 3A3833-1.

(3) On Regulator P/N 4A3865-3, remove and discard Trigger Cover P/N 3A4083-1 and installation hardware (screws, washers and inserts).

(4) If not previously accomplished, replace Rod P/N 2A1937-1 with Rod P/N 2A1937-2 in accordance with Goodrich Service Bulletin 25-308.

(5) If applicable and if not previously accomplished, replace angled Trigger Housing P/N 4A3864-1 with squared off Trigger Housing P/N 4A3864-2 or -3 in accordance with Goodrich Service Bulletin 5A3086/5A3088-25-336.

(6) Clean and inspect the regulator components in accordance with the Cleaning and Check sections of the manual.

(7) Assemble the regulator per the ASSEMBLY section of the manual, except install new black Piston Plug P/N 300382-1 as a replacement for white Piston Insert P/N 3A3833-1.

(8) Test the assembled regulator in accordance with the Testing section of the manual.

(9) Re-identify the modified regulator with the revised dash number. (Refer to paragraph 3.B and Table 5, below.)

(10) Mark the valve body with the information "SB 25-338" adjacent to the identification label to indicate compliance with this service bulletin. Use permanent ink for this.

D. Complete maintenance tasks, re-assemble and test the charged cylinder assembly in accordance with Goodrich CMM 25-60-35.

E. Re-identify the charged cylinder assembly with the revised dash number. (Refer to paragraph 3.B and Table 5, below.)

F. Modify valise assembly P/N's 4A3899-1 and 4A3899-33 on 5A3307 series slides as follows.

(1) (P/N 4A3899-33 only) Cut stitches, then remove and discard P/N 300256-101 Pad.

25-338 Rev. 2 - May 8/09 Page 6 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 7OCROpen in PDF

Goodrich

SERVICE BULLETIN

(2) Install new Ensolite Pad P/N 300256-102 on valise as shown in Figure 1, below. Stitch in accordance with the instructions in Goodrich CMM 25-60-37 REPAIR section, as applicable.

(3) Re-identify the modified valise with the revised valise dash number. (Refer to paragraph 3.B and Table 5, below).

(4) Stencil the valise with the information "SB 25-338" adjacent to the valise part number to indicate compliance with this service bulletin.

Detail A Spring Band (Ref)

- 16.5 in. Sew with 1/4 in.

Double Needle See Detail A 4.25 in.

(PAN 300256-102) Sew with 1/4 in.

Double Needle Outside (Yellow) surface of Valise Figure 1.

Installation of Ensolite Pad on Valise (5A3307 Series Slides Only) Rev. 2 - May 8/09 25-338 Page 7 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 8OCROpen in PDF

Goodrich

SERVICE BULLETIN G. Complete other required maintenance activities per scheduled maintenance tasks and repack the unit.

H. Re-identify the modified slide with revised system dash numbers (both Goodrich and Boeing). (Refer to paragraph 3.B and Table 5, below.)

Stencil the girt with the information "SB 25-338" adjacent to system identification placard in order to indicate compliance with this service bulletin.

Record Service Bulletin compliance on the system information card (located in the girt pocket).

3. Materials and Identification A. Parts Parts required to perform this modification are shown in Table 4, below. The basis for this material data is per unit.

NOTE: This service bulletin modification requires prior or concurrent incorporation of previously released Goodrich Service Bulletins 25-308 and 5A3086/5A3088-25-336. If not previously accomplished, refer to those bulletins for material information applicable to those modifications.

Table 4. Material Data New P/N Qty Price* Nomenclature Old P/N Instructions/ Disposition 300382-1 $46.00 Plug ЗА3833-1 Install on all affected units.

Discard old part.

300256-102 1 $49.00 Pad 300256-101 Install on 5A3307 series units.

Discard old part.

* Price listed is standard catalog price and is valid through December 31, 2009. For units in warranty as of the original publication date of this service bulletin, parts will be supplied at no charge.

25-338 Rev. 2 - May 8/09 Page 8 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

Page 9OCROpen in PDF

Goodrich

SERVICE BULLETIN B. Identification Component and system part numbers are updated upon completion of these modifications. Block out old dash number on item and re-identify with the post-Service-Bulletin dash number as shown in Table 5, below.

Table 5. Part Number Information Description Pre-SB Part No. Post-SB Part No. Equivalent New Production Item Cylinder Assy, Charged 4A3756-3 4A3756-5 4A3756-5 Cylinder Assy, Charged 4A3756-4 4A3756-6 4A3756-6 Cylinder Assy, Charged 4A3904-1 4A3904-4 4A3904-4 Cylinder Assy, Charged 4A3904-2 4A3904-4 4A3904-4 Regulator 4A3865-2 4A3865-4 4A3865-4 Regulator 4A3865-3 4A3865-4 4A3865-4 Slide, Fwd 5A3086-3 (Boeing P/N 5A3086-301 (Boeing P/N N/A3 10-61323-1002) 10-61323-1302) Slide, Aft 5A3088-3 (Boeing P/N 5A3088-301(Boeing P/N N/A3 10-61323-1003) 10-61323-1303) Slide, Fwd/Aft 5A3307-1 (Boeing P/N 5A3307-301 (Boeing P/N N/A3 10-61323-2001) 10-61323-2302) Slide, Fwd/Aft 5A3307-3 (Boeing P/N 5A3307-301 (Boeing P/N N/A3 10-61323-2002) 10-61323-2302) Slide Assy, Fwd1, 4 5A3099-11 5A3099-3011 N/A Slide Assy, Fwd2, 4 5A3099-22 5A3099-3022 N/A Slide Assy, Aft, 4 5A3100-11 5A3100-3011 N/A Slide Assy, Aft, 4 5A3100-22 5A3100-3022 N/A Slide Assy, Fwd/Aft+ 5A3306-1 5A3306-301 N/A Slide Assy, Fwd/Aft 5A3306-2 5A3306-301 N/A Valise Assy 4A3899-1 4A3899-39 4A3899-39 Valise Assy 4A3899-33 4A3899-39 4A3899-39 NOTE:

1. Configurations noted with superscript 1) are pre-SB 5A3086/5A3088-25-302 configurations.

2. Configurations noted with superscript 2(2) are post-SB 5A3086/5A3088-25-302 configurations.

3. For items noted with a superscript 3 (3), See Note in "Scope of Action", paragraph 1.A. (2),

4. Slide assembly (items noted with superscript 4(4)) part numbers are not marked on the unit and are listed for reference information only.

Rev. 2 - May 8/09 25-338 Page 9 of 9 THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE.

No text on this page: it may be a figure. Open the PDF to see it.