TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2d6dbaea249954df486cf6425a6a6b797d5e9b213aba3e78a4cf371f3c5e5a0b' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '2d6dbaea249954df486cf6425a6a6b797d5e9b213aba3e78a4cf371f3c5e5a0b' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SERVICE BULLETIN
SUBJECT
NUMBER 150-52-188
DOORS (ATA 52) – MAIN ENTRANCE DOOR (MED) – AIRSTAIR – INTERNAL MICROSWITCH
ADJUSTMENT
JANUARY 15, 2016
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 1 of 9
DOORS - MAIN ENTRANCE DOOR (MED) - AIRSTAIR - INTERNAL MICROSWITCH
ADJUSTMENT
PLANNING INFORMATION 150-52-188
1. Effectivity Aircraft serial numbers 201 through 318
2. Concurrent Requirement None
3. Reason Subsequent to a recent event in which the Main Entrance Door (MED) of an Astra aircraft opened during flight, a detailed review of the door rigging and operation determined that, in certain instances, the CABIN DOOR UNLOCK Crew Alerting System (CAS) message may extinguish before the handle latch pin is fully engaged.
We have identified an improved switch adjustment that will extinguish the warning light only after the handle latch pin is fully engaged.
4. Description This Service Bulletin provides instructions to adjust the MED internal microswitch in accordance with improved procedures.
5. Compliance Compliance with this Service Bulletin is mandatory at the next suitable planned maintenance period within the next 24 months from the original release date of January 15, 2016.
6. Approval This Service Bulletin has been reviewed by the Civil Aviation Authority of Israel (CAAI).
The design content herein complies with the applicable Civil Aviation Regulations and is CAAI approved.
January 15, 2016
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 2 of 9
7. Manpower The following information is for planning purposes only:
Estimated labor-hours: 6
8. Weight and Balance Negligible
9. Weight and Balance Negligible
10. Electrical Load Data No change
11. Software Accomplishment Summary None
12. References G150 Aircraft Maintenance Manual (AMM), Chapter 20 Gulfstream Aerospace LP G150 TC design change G15-10083 NOTE: This Service Bulletin incorporates design data approved under G150 TC design change and MOD G15-10083 for installation on the standard type certificated aircraft. Approval for any deviation from the instructions contained in this service bulletin should be obtained, if required, from the local regulatory authority in accordance with the local relevant regulations.
13. Other Publications Affected G150 AMM, Chapter 52 G150 Illustrated Parts Catalog (IPC), Chapter 52 NOTE: Data concerning this Service Bulletin will be published in a future revision of the affected manual(s). This Service Bulletin will provide technical data until the revisions are published.
14. Interchangeability or In termixability of Parts None January 15, 2016
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 3 of 9
MATERIAL INFORMATION
1. Material - Price and Availability The parts required to accomplish this Service Bulletin are available by contacting Spare Parts Sales at 800-810-GULF (4853) or 912-965-4178.
2. Warranty Coverage - Component None
3. Material Necessary for Each Aircraft A. Material to be Procured:
B. Materials Supplied by Operator:
None
4. Reidentified Parts None
5. Special Tooling None New P/N Keyword Old P/N Qty NAS1149G0832P Washer (0.032 inch thick) 3 or (A/R) NAS1149G0816P Washer (0.016 inch thick) 2 or (A/R) New P/N Keyword Old P/N Qty MS20995C32 Safety Wire A/R January 15, 2016
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 4 of 9
ACCOMPLISHMENT INSTRUCTIONS CAUTION: PROTECT WIRE BUNDLE S, CONNECTORS AND SURROUNDING
STRUCTURE DURING ANY MAINTENANCE PROCEDURES FROM SHAVINGS, DEBRIS AND CONTAMINATION. MAINTAIN A PROPERLY
CLEANED WORK AREA THROUGHOUT THE PROCEDURE TO ENSURE THE INTEGRITY OF THE AFFECTED COMPONENT/SYSTEM. VISUALLY
INSPECT WORK AREA USING ADDITIONAL LIGHT AS NECESSARY TO
VERIFY ABSENCE OF ANY DEBRIS PRIOR TO COMPLETION OF PROCEDURE. FAILURE TO COMPLY MAY RESULT IN DAMAGE TO COMPONENTS AND/OR SYSTEMS.
1. Prepare aircraft for safe maintenance. Refer to AMM, Safe Ground Maintenance Procedure, Chapter 20.
2. Connect electrical power to ai rcraft. Refer to AMM, Chapter 20.
3. Perform door airstair inne r microswitch, 276H, (3) updated rigging adjustment procedure, as follows (refer to Figure 1):
A. Open door and remove access panel 118 from door to access the inner door microswitch (3). Refer to Figure 1, Sheet 1 and 2.
B. Pull, tag and install safety clip on Circuit Breaker (CB) 6L on left DC power box in equipment compartment. Refer to AMM, Chapter 24.
C. Remove safety wire from jam nut (2). Refer to Figure 1, Sheet 2.
D. Hold microswitch (3) secure ly and remove jam nut (2) at bracket (4). Refer to Figure 1, Sheet 2.
NOTE: Depress lever on aft side of door and rotate in order to actuate handle without closing the door.
NOTE: CABIN DOOR UNLOCK warning circuit requires both switches be depressed to indicate. Door switch on airframe must be manually depressed to simulate complete circuit.
NOTE: Additional washers, P/N NAS1149G0832P and P/N NAS1149G0816P between microswitch, 276H, and bracket are installed in addition to existing washers.
E. Add washers (1), P/N NAS1149G 0832P and NAS1149G0816P between microswitch, 276H, (3) and bracket (4), so that when the door handle is rotated to the locked position the CABIN DOOR UNLOCK message on CAS should be displayed. Tighten jam nut (2) after each installation of additional washer. Refer to Figure 1, Sheet 2.
January 15, 2016
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 5 of 9 F. Remove washers, P/N NAS1149G0816P , one by one until a combination is obtained that, when the door is closed and the handle latch pin is fully engaged within the stirrup channel, the CABIN DOOR UNLOCK CAS message is extinguished. Refer to Figure 1, Sheet 2, Detail D.
CAUTION: THE OVERRIDE TOGGLE LEVER ON AFT SIDE OF DOOR
MUST BE DEPRESSED IN ORDER TO MOVE HANDLE TO LOCKED POSITION WITHOUT CLOSING DOOR. FORCING
HANDLE MOVEMENT WITHOUT CLOSING DOOR OR
DEPRESSING OVERRIDE TOGGLE LEVER MAY RESULT IN DAMAGE TO DOOR.
NOTE: After each removal, make sure that the microswitch, 276H, is firmly placed and tightened.
NOTE: An equivalent to removing a P/N NAS1149G0816P, 0.016 inch thick, may be removal of one washer P/N NAS1149G0832P, 0.032 inch thick washer, and adding back one P/N NAS1149G0816P, 0.016 inch thick.
G. Depress lever on aft side of door and rotate the handle towards the unlocked position until it contacts the stirrup. Ensure the CABIN DOOR UNLOCK CAS message is not displayed. Refer to Figure 1, Sheet 3.
H. Remove one more additional washer (1), P/N NAS1149G0816P, 0.016 inch thick.
I. Verify the CABIN DOOR UNLOCK CA S message extinguishes only after the stirrup has come up and the handle latch pin is fully engaged in the stirrup channel. Refer to Figure 1, Sheet 2.
(1) If CABIN DOOR UNLOCK message displays, add back the washer (1), P/N NAS1149G0816P that was removed in Step 3.H. above.
J. Depress lever on aft side of door and rotate the handle towards the unlocked position until it contacts the stirrup. Ensure the CABIN DOOR UNLOCK CAS message is not displayed. Refer to Figure 1, Sheet 3.
K. Remove safety clip, tag and depress CB 6L that was pulled in Step 3.B.
L. Verify that the inner h andle is rotated back to UNLOCKED position. Rotate handle to locked position and verify that handle is locked at the end of travel.
M. Ensure CABIN DOOR UNLOCK message on CAS is extinguished.
N. Secure jam nut (2) with safety wire, P/N MS20995C32. Refer to Figure 1, Sheet
2.
January 15, 2016
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 6 of 9 O. Disconnect electrical power from aircraft. Refer to AMM, Chapter 20.
4. Ensure all work areas are clean and clear of foreign objects (FOD).
5. Reinstall access panel 118 on MED previously removed in Step 3.A.
6. Record compliance with this Service Bulletin in the aircraft’s permanent maintenance records and return aircraft to flight status.
7. Report compliance with this service bulletin to Gulfstream Computerized Maintenance Program (CMP) by uploading the attached service reply card, along with the CMP task card(s) sign-off using MyGulfstream, MyCMP Document Upload or e-mail to cmp.docproc@gulfstream.com or fax to Gulfstream CMP at 800-944-1775 or 912-963-0265.
If technical assistance is required, contact your area Gulfstream Field Service Representative or call Gulfstream Customer Support at 800-810-GULF (4853) or 912-965-4178 (fax 912-965-4184).
January 15, 2016
Gulfstream
SERVICE BULLETIN 00000
SEE DETAIL A - SEE DETAIL B
SEE DETAIL D
DETAIL A ACCESS PANEL 118
SEE DETAIL C SB150-52-188-001-S01
DETAIL B Airstair Door Internal Microswitch - Adjustment Figure 1 (Sheet 1) January 15, 2016 Service Bulletin No. 150-52-188 Page 7 of 9
Gulfstream
SERVICE BULLETIN
1) WASHER P/N NAS1149G0816P OR P/N NAS1149G0832P (3) MICROSWITCH (276H)
(4) BRACKET
(2) JAM NUT
DETAIL C
(5) HANDLE'S PIN
SEE DETAILED
VIEW IN SHEET 3
(6) STIRRUP CHANNEL VIEW LKG AFT SB150-52-188-001-S02
DETAIL D
HANDLE'S PIN LOCATED IN THE STIRRUP CHANNEL Airstair Door Internal Microswitch - Adjustment Figure 1 (Sheet 2) January 15, 2016 Service Bulletin No. 150-52-188 Page 8 of 9
Gulfstream
SERVICE BULLETIN Service Bulletin No. 150-52-188 Page 9 of 9 Airstair Door Internal Microswitch - Adjustment Figure 1 (Sheet 3) January 15, 2016
SECTION OF THE STIRRUP AND PIN CONTACTING
THE CHANNEL FACE WHEN HANDLE IS ROTATED
TOWARDS THE UNLOCKING POSITION
GULFSTREAM G150 SERVICE BULLETIN NO. 150-52-188
SERVICE REPLY CARD Service Bulletin prepared by Gulfstream Aerospace, 500 Gulfstream Road, P.O. Box 2206, Savannah, Georgia 31402-2206, USA. © 2016 Gulfstream Aerospace. All rights reserved, including the right to reproduce this publication.
No part may be reproduced, stored in any retrieval system, or transmitted in any part or form or by any means, electronic, photocopying, microfilm, microfiche, mechanical, or otherwise, without prior written permission of Gulfstream Aerospace. This technical data is controlled under the Export Administration Regulations by General License TSU. It may not be transferred to a third party without the prior written approval of the U.S. Department of Commerce.
Please upload this page, along with the CMP task card(s) sign-off using MyGulfstream, MyCMP Document Upload, or e-mail to cmp.docproc@gulfstream.com or fax to Gulfstream CMP at 800- 944-1775 or 912-963-0265.
The following Service Bulletin (SB) has been addressed:
SB CMP NUMBER A/C AIRCRAFT TYPE COMPLIANCE DATE 981880 Gulfstream G150
Aircraft Hours _ _____________________ Aircraft Landings_____________________
This Service Bulletin is not applicable because:
_______ Serial Number not affected _______ Equipment not installed _______Previously complied with (annotate method of compliance below) _______Other (explain reason below)
SIGNATURE TITLE / CERTIFICATE NUMBER
COMPANY
COMMENTS / SUGGESTIONS / ACTIONS TAKEN: