Service bulletin · Honeywell

No revision namedHoneywell SB GTCP331-49-7954 · 16 pages · 132 KB

© Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2023-1220; AD 2023-19-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-1220 (document 0004) · AD 2023-19-03

Manufacturer
Honeywell
Type
Service Bulletin
Number
GTCP331-49-7954

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 16

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2023-1220; AD 2023-19-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '726a3ce0150626eaa651f80c465dc41768fdb2554f32d2aa90d44a4bd695be0c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Honeywell International Inc.

P.O. Box 52181 Phoenix, AZ 85072-2181 U.S.A.

CAGE: 99193 Telephone: (800) 601-3099 (U.S.A.)

Telephone: (602) 365-3099 (International) Web site: http://portal.honeywell.com/wps/portal/aero

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 1 of 16 © Honeywell International Inc. Do not copy without express permission of Honeywell.

SERVICE BULLETIN

AIRBORNE AUXILIARY POWER - GAS TURBINE ENGINE - Recall of Fuel Control Assemblies with Epoxy-Type Repair of the Fuel Control Unit Assembly Housing Gear Pockets

Legal Notice Export Control This document contains technical data and is subject to U.S. export regulation s. These commodities, technology, or software were exported from the United States in accordance with the export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991, no license required.

Proprietary Information Honeywell – Confidential

THIS DOCUMENT AND ALL INFORMATION AND EXPRESSION CONTAINED HEREIN ARE THE PROPERTY OF HONEYWELL INTERNATIONAL INC., ARE PROVIDED IN CONFIDENCE, AND MAY BE USED BY PERSONS REQUIRED BY FEDERAL AVIATION REGULATION PART 21.50 TO COMPLY WITH ANY OF THE TERMS OF THESE INSTRUCTIONS. EXCEPT AS SET FORTH ABOVE, NO PERSON MAY,

IN WHOLE OR IN PART, USE, DUPLICATE OR DISCLOSE THIS INFORMATION FOR ANY PURPOSE WITHOUT THE PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL INC.

Honeywell Materials License Agreement The documents and information contained herein (“the Materials”) are the proprietary data of Honeywell International Inc. and Honeywell Intellectual Properties Inc (collectively “Honeywell”). These Materials are provided for the exclusive use of Honeywell Service Centers; Honeywell-authorized repair facilities; operators of Honeywell aerospace products subject to an applicable product support agreement, their wholly owned-subsidiaries or a formally designated third party service provider; and direct recipients of Materials from Honeywell’s Aerospace Technical Publication Distribution. The terms and conditions of this License Agreement govern your use of these Materials, except to the extent that any terms and conditions of another applicable agreement with Honeywell regarding the operation, maintenance, or repair of Honeywell aerospace products conflict with the terms and conditions of this License Agreement, in which case the terms and conditions of the other agreement will govern. However, this License Agreement will govern in the event of a conflict between its terms and conditions and those of a purchase order or acknowledgement.

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 2 © Honeywell International Inc. Do not copy without express permission of Honeywell.

1. License Grant - If you are a party to an applicable product support agreement, a Honeywell Service Center agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited, non-exclusive license to use these Materials to operate, maintain, or repair Honeywell aerospace products only in accordance with that agreement.

If you are a direct recipient of these Materials from Honeywell’s Aerospac e Technical Publication Distribution and are not a party to an agreement related to the operation, maintenance or repair of Honeywell aerospace products, Honeywell hereby grants you a limited, non-exclusive license to use these Materials to maintain or repair the subject Honeywell aerospace products only at the facility to which these Materials have been shipped ("the Licensed Facility"). Transfer of the Materials to another facility owned by you is permitted only if the original Licensed Facility retains no copies of the Materials and you provide prior written notice to Honeywell.

2. Rights In Materials - Hone ywell retains all rights in these Materials and in any copies thereof that are not expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets. No license to use any Honeywell trademarks or patents is granted under this License Agreement.

3. Confidentiality - You ackno wledge that these Materials contain information that is confidential and proprietary to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of these Materials.

4. Assignment And Transfer - Th is License Agreement may be assigned to a formally designated service designee or transferred to a subsequent owner or operator of an aircraft containing the subject Honeywell aerospace products.

However, the recipient of any such assignment or transfer must assume all of your obligations under this License Agreement. No assignment or transfer shall relieve any party of any obligation that such party then has hereunder.

5. Copies of Materials - Unle ss you have the express written permission of Honeywell, you may not make or permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies of only portions of the Material for your internal use. You agree to return the Materials and any copies thereof to Honeywell upon the request of Honeywell.

6. Term - Th is License Agreement is effective until terminated as set forth herein. This License Agreement will terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this License Agreement or will terminate simultaneously with the termination or expiration of your applicable product support agreement, authorized repair facility agreement, or your formal designation as a third party service provider. Upon termination of this License Agreement, you will return these Materials to Honeywell without retaining any copies and will have one of your authorized officers certify that all Materials have been returned with no copies retained.

7. Remedies - Hone ywell reserves the right to pursue all available remedies and damages resulting from a breach of this License Agreement.

8. Limitation of Liability - Honeyw ell does not make any representation regarding the use or sufficiency of the Materials.

THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISING FROM COURSE OF PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR (ii) WARRANTIES AGAINST

INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES, EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT. IN NO EVENT WILL HONEYWELL BE LIABLE FOR ANY INCIDENTAL

DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT

PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS WILL APPLY REGARDLESS OF

WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE.

9. Controlling Law - Th is License shall be governed and construed in accordance with the laws of the State of New York without regard to the conflicts of laws provisions thereof. This license sets forth the entire agreement between you and Honeywell and may only be modified by a writing duly executed by the duly authorized representatives of the parties.

Copyright - Notice Copyright 2007 Honeywell International Inc. All rights reserved.

Honeywell is a registered trademark of Hone ywell International Inc.

All other marks are owned by their respective companies.

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

Transmittal Information Summary This service bulletin is used to recall fuel control as semblies that had the epoxy-type repair performed on the fuel control unit housing assembly gear pockets. The repair causes a significant reduction in fuel control unit housing fatigue life, and increases the stress on the fuel control unit housing because of the removal of parent material. This increased stress can cause a crack in the fuel control unit housing and result in possible external leak.

This is an ORIGINAL issue.

Revision History This is the initial release of Service Bulletin GTCP331-49-7954 as summarized in Table 1.

Table 1. Service Bulletin Revisions Revision Date of Release Initial Release 19 Dec 2007

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 4 © Honeywell International Inc. Do not copy without express permission of Honeywell.

Blank Page

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 5 © Honeywell International Inc. Do not copy without express permission of Honeywell.

1. Planning Information A. Effectivity

(1) This service bulletin is applicable to the f uel control as sembly shown in Table 2, with Fuel Control Unit Housing Assembly, Part Numbers 3883404-1, 3883404-2, 3883855- 1, and 3883856-1.

Table 2. Applicable Component Part Number Before Serial Number* Application 3883240-3/-5/-6 *32184 GTCP331-350[C]

* All known field repaired fuel control assemblies, the applicable serial numbers, and related APU serial numbers are shown in Paragraph 1.C.(2).

(2) The above component is used on the APUs shown in Table 3.

Table 3. Applicable Component

Part Number Engine Model Number Bef ore Serial Number*

Applicat ion 3800454-4**/-5/-6 331-350[C] * A330/A340-200/-300

* All known field repaired fuel control assemblies, the applicable serial numbers, and related APU serial numbers are shown in Paragraph 1.C.(2).

** Applicable APUs with both Pre and Post Service Bulletin GTCP331-49-7738.

B. Concurrent Requirements

(1) Do the service bulletin shown in Table 4 with this service bulletin. You can do the servic e bulletins independently.

Table 4. Concurrent Service Bulletin Service Bulletin Number Service Bulletin Title 3883240-49-7092 Rework the Fuel Control Assembly, Part Number 3883240-3/-5 to Part Number 3883240 -6

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 6 © Honeywell International Inc. Do not copy without express permission of Honeywell.

C. Reason

(1) Problem:

There has been one known incident where a fuel control unit housing assembly crac ked and caused a fuel leak within the APU compartment. The crack occurs at the high pressure filter port. A leak in the fuel control assembly at the high pressure filter port can cause a range of problems from APU auto-shutdown to a possible fire in the APU compartment.

(2) Background:

The fuel control assembly which caused a fuel leak in the APU compartment had a repaire d fuel control unit housing assembly. The repair includes the removal of the parent material in the pump gear pocket. Then an epoxy or similar material is applied to repair the pump gear pocket geometry.

Analytical stress models of the fuel cont rol unit housi ng assembly shows a significant reduction in the cycle life because of an increase in the stress at the high pressure fuel port on a repaired fuel control unit housing assembly when compared to a nonrepaired fuel control unit housing assembly.

The serial numbers of the applicable fuel control assemblies are as follows:

FCU Housing Assembly (Part Number 3883855) Fuel Control Assembly Serial Number Last Known APU Serial Number Time Since New Time Since Repair FCU Housing Assembly Serial Number 17726 R249C UNK UNK UNK 13704C UNK 12069 UNK UNK 23092 R256 UNK UNK UNK 18961 UNK 11368 UNK UNK 19718 UNK 4488 UNK UNK 24508 R606 UNK UNK UNK 15878 R326 UNK UNK UNK

UNK UNK UNK UNK UNK A231C R378 UNK UNK UNK A213C UNK 23037 UNK UNK 19730 UNK UNK UNK UNK 24669 R612 UNK UNK UNK 22163 R491 UNK UNK UNK 16548 UNK UNK UNK UNK 20712 R516C UNK UNK UNK 22044 R387 UNK UNK UNK 10721C R195C UNK UNK UNK 19933C R482C UNK UNK UNK 15129 UNK UNK UNK UNK 20126 R405 UNK UNK UNK 16431 UNK UNK UNK UNK 22131 R186C UNK UNK UNK 20710 UNK UNK UNK UNK

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 7 © Honeywell International Inc. Do not copy without express permission of Honeywell.

Fuel Control Assembly Serial Number Last Known APU Serial Number Time Since New Time Since Repair FCU Housing Assembly Serial Number 22465 R507C UNK UNK UNK A215C R179C UNK UNK UNK 18598 R319C UNK UNK UNK 16943 R321C UNK UNK UNK 18083 R302C UNK UNK UNK 28534 UNK 2494 UNK UNK 15873 UNK UNK UNK UNK

UNK UNK UNK UNK UNK 22130 UNK UNK UNK UNK 19733 R395C UNK UNK UNK 19193 R346C UNK UNK UNK 23670 R584C UNK UNK UNK 21432 UNK UNK UNK UNK 23670 UNK UNK UNK UNK 21431 R450 UNK UNK UNK 26655 R696 UNK UNK UNK 23500 R574 UNK UNK UNK 19531 UNK UNK UNK UNK 14931 UNK 18064 2388 UNK 21565 UNK UNK UNK UNK 20130 R305 UNK UNK UNK 14577 R426C UNK UNK UNK 22319 R562C UNK UNK UNK 18777 UNK 11499 2249 UNK 17565 R270 UNK UNK UNK 16739 UNK UNK UNK UNK A171 R166C UNK UNK UNK 21256 R400C UNK UNK UNK 17495 R503C UNK UNK UNK 23786 R572C UNK UNK UNK 15476 R139C UNK UNK UNK 20714 R282 UNK UNK UNK 24804 R613 UNK UNK UNK 17472 UNK UNK UNK UNK 14816 R622C UNK UNK UNK 14813 R452 UNK UNK UNK 26098 P738 UNK UNK UNK 13998C R199C UNK UNK UNK 16942 UNK UNK UNK 1541 23673 R567 UNK UNK UNK A170C R172C UNK UNK UNK A216C R163C UNK UNK UNK 22167 R494C UNK UNK UNK 13585C R224C UNK UNK UNK 22221 R492 UNK UNK UNK 20713 UNK UNK UNK UNK 22317 UNK UNK UNK UNK

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 8 © Honeywell International Inc. Do not copy without express permission of Honeywell.

Fuel Control Assembly Serial Number Last Known APU Serial Number Time Since New Time Since Repair FCU Housing Assembly Serial Number 25650 R654 UNK UNK UNK 14810 R586C UNK UNK UNK 21858 R479C UNK UNK UNK 23497 UNK UNK UNK UNK 20604 UNK UNK UNK UNK 20504 UNK UNK UNK UNK 22467 R708 UNK UNK UNK 23720 R277C UNK UNK UNK 15477 R109C UNK UNK UNK 25471 R156C UNK UNK UNK 25820 R671C UNK UNK UNK 19332 R244C UNK UNK UNK UNK R228 UNK UNK UNK 22765 UNK UNK UNK 1649

FCU Housing Assembly (Part Number 3883856) Fuel Control Assembly Serial Number Last Known APU Serial Number Time Since New Time Since Repair FCU Housing Assembly Serial Number 11004C UNK UNK UNK UNK 11003C UNK UNK UNK UNK 10658C UNK UNK UNK UNK A213C UNK UNK UNK UNK A153C UNK UNK UNK UNK A217C UNK UNK UNK UNK 13166C UNK UNK UNK UNK A134C UNK UNK UNK UNK A193C UNK UNK UNK UNK 13582C UNK UNK UNK UNK A113C UNK UNK UNK UNK A169C UNK UNK UNK UNK A222C UNK UNK UNK UNK 14002 UNK UNK UNK UNK A120C UNK UNK UNK UNK 10660C R230C UNK UNK UNK 11003C UNK UNK UNK UNK A125C UNK UNK UNK UNK 13169C UNK UNK UNK UNK A136C R155C UNK UNK UNK 21254 UNK UNK UNK UNK A114C UNK UNK UNK UNK A105C UNK UNK UNK UNK 10712C R123C UNK UNK UNK A174C R512C UNK UNK UNK

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 9 © Honeywell International Inc. Do not copy without express permission of Honeywell.

FCU Housing Assembly (Part Number 3883404) Fuel Control Assembly Serial Number Last Known APU Serial Number Time Since New Time Since Repair FCU Housing Assembly Serial Number A111C UNK UNK UNK UNK A193C UNK UNK UNK UNK 13587C UNK UNK UNK UNK 14000 UNK UNK UNK UNK A180C UNK UNK UNK UNK 14005 UNK UNK UNK UNK A154C UNK UNK UNK UNK 15132 UNK UNK UNK UNK A187C UNK UNK UNK UNK 13168 UNK UNK UNK UNK

UNK UNK UNK UNK UNK A149C UNK UNK UNK UNK 13169C UNK UNK UNK UNK A218C UNK UNK UNK UNK A188C R234 UNK UNK UNK A143C UNK UNK UNK UNK 13708C R261 UNK UNK UNK A178C R376C UNK UNK UNK

(3) Technical Validation:

(a) This design was validated by bench cy cle test on a fuel control assembly at Hon eywell to validate the stress analysis.

(4) Benefits:

(a) Cost Benefit Analysis: This service bulletin is to be done at no charge to the operator for the fuel co ntrol assemblies shown in Paragraph 1.C.(2) therefore no cost benefit analysis is necessary.

(5) Action:

(a) Return the defective fuel contro l assembl ies to an authorized Honeywell repair facility for rework at the next APU or component shop visit.

Since there is a possibility that some APUs and fuel control assemblies have been repaire d at non-Honeywell repair facilities, operators are strongly advised to review their fleet for fuel control assemblies which have the epoxytype repair recorded on the fuel control unit housing assembly gear pockets.

If a record of the epoxy-type repair is found, Honeywell recommends this service bulletin be done at the next APU or component shop visit.

D. Desc ription

(1) This service bulletin includes the instructions and authority for the operator to return defective fuel control a ssemblies to Honeywell for repair or replacement. The serial numbers of known defective fuel control assemblies are shown in Paragraph 1.C.(2).

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 10 © Honeywell International Inc. Do not copy without express permission of Honeywell.

E. Compliance

(1) Honeywell recommends that this service bulletin be done at the next APU/component shop visit.

F. Approval

(1) The Technical Standard Order (TSO) approval was received for the changes identified in this service bulletin.

G. Manpower

(1) No additional manhours are necessary when this service bulletin is done at overhaul or at access to the part.

(2) This service bulletin does not include the cost for add itional labor to repair the fuel control unit.

H. Weight and Balance

(1) None.

I. Electrical Load Data

(1) Not changed.

J. Software Accomplishment Summary

(1) Not applicable.

K. References

(1) Publications.

(a) The Honeywell publication used to do this service bulletin is shown in Table 5.

Table 5. Honeywell Publication Component Maintenance Manual Part Number ATA Number Revision 3883240-3/-5/-6 49-31-65 5

L. Other Publications Affected

(1) Same as the publication shown in Paragraph 1.K.(1).

M. Interchangeability or Intermixability of Parts

(1) This service bulletin does have an effect on interchangeability or Intermixability. Refer to the IPC.

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 11 © Honeywell International Inc. Do not copy without express permission of Honeywell.

2. Material Information A. Material - Price and Availability

(1) No modification kit is available for this service bulletin.

B. Industry Support Information

(1) APUs or FCUs shown in Paragraph 1.C.(2) returned to an authorized Honeywell repair facility for rep air and/or overhaul will have this service bulletin done without additional charge. Authorized Repair Facilities will receive reimbursement for this service bulletin upon submittal of a completed Warranty claim.

(2) Refer questions to:

Honeywell Complete Customer Care Center Telephone: (800) 601-3099 (U.S.A.)

Telephone: (602) 3 65-3099 (International)

(3) Units can be sent to the authorized Honeywell repair fa cilities as follows:

Honeywell Aerospace Services Shipping and Receiving 1944 E. Sky Harbor Circle Phoenix, AZ 85034 H oneywell Aerospace GmbH Raunheim, Germany (AAS) Fr ankfurter Strasse 41-65 Raunheim, 65479 Germany Telephone: 49-6142-405-0 AOG: 49-6142-405-298 FAX: 49-6142-405-239 Honeywell Aerospace Services Singapore, Republi c of (AAS) 161 Gul Circle Jurong Industrial Park Singapore, 629619 Singapore Telephone: 65-861-4533 AOG: 65-9633-5987 FAX: 65-6862-3878

SERVICE BULLETIN GTCP331-350[C]

19 Dec 2007 GTCP331-49-7954 Revision 0, 19 Dec 2007 Page 12 © Honeywell International Inc. Do not copy without express permission of Honeywell.

C. Material Necessary for Each Component

NOTE: Parts necessary to do this service bulletin are available in limited quantities and later available at standard catalog lead times.

(1) Refer to Table 6 for material to be purchased.

NOTE: The illustrated parts catalogs and spare parts bulletins dated later than the original issue date of this service bulletin can introduce different parts.

Refer to these documents before you order parts.

Table 6. Operator - Purchased Material

New Part Number Keyword/ Nome nclature

Old Part Number

Qty

Unit Price* Instructions/ Disposit ion 3883240-6 Fuel Control Asse mbly **3883240-3/-5/-6 1 * C, O, S1, S2, S3, Y +3883855-1 or 3883856-1 Fuel Control Unit Hous ing Assembly **3883404-1/-2, or 3883855 -1, or 3883856-1 1 * B * Parts for this service bulletin will be supplied by Honeywell at no charge to the operator for the units shown in Paragraph 1.C.(2). Additional parts and labor to repair the fuel control assembly are not included in this service bulletin. Refer to Paragraph 2.B.(2) for information about the availability of parts.

** Known affected serial numbers are shown in Paragraph 1.C.(2).

+ Detail part included with Fuel Control Assembly, Part Number 3883240.

Disposition Code B. Replaced part.

Disposition Code C. Rework the part as sho wn in this service bulletin.

Disposition Code O. The new part is available on exchange basis. Refer to Paragraph 2. B. for instructions.

Disposition Code S1. Send the part to Honeywell Aerospace Services, Shipping and Receiving, 1944 E. Sky Harbor Circle, Phoenix, AZ 85034, for rework.

Disposition Code S2. Send the part to Honeywell Engines, GmbH, Postfach 1150, D-65479 Raunheim, Germany , for rework.

Disposition Code S3. Send the part to Honeywell, Singapore Pte Ltd, 161 Gul Circle, Juro ng Town, Singapore 629619 or Jurong Town, P.O. Box 166, Singapore 91699, for rework.

Disposition Code Y. Inspection, repair and/or test/check necessary. Refer to Accomplishment Instructions in Section 3. or refer to Other Publications Affected in Paragraph 1.L.